Beruflich Dokumente
Kultur Dokumente
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS).
The DIS requires approval by at least 75 % of the member bodies casting a vote.
Standards published
New International Standards published between 10 June and 09 July 2009
*Available in English only
** French version of standard previously published in English only
Price
group
TC 1 Screw threads
ISO 5408:2009 Screw threads – Vocabulary R
TC 2 Fasteners
ISO 10644:2009 Screw and washer assemblies made of steel with plain washers – Washer hardness classes 200 HV and D
300 HV
ISO 10673:2009 Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A D
TC 17 Steel
ISO 17832:2009 * Non-parallel steel wire and cords for tyre reinforcement G
TC 22 Road vehicles
ISO 6310:2009 * Road vehicles – Brake linings – Compressive strain test methods G
ISO 22900-3: 2009 * Road vehicles – Modular vehicle communication interface (MVCI) – Part 3: Diagnostic server application XJ
programming interface (D-Server API)
ISO 26867:2009 * Road vehicles – Brake lining friction materials – Friction behaviour assessment for automotive brake M
systems
TC 29 Small tools
ISO 3317:2009 Assembly tools for screws and nuts – Square drive adaptor with hexagon or cylindrical flat drive, for power C
socket wrenches
TC 34 Food products
ISO 659:2009 Oilseeds – Determination of oil content (Reference method) F
ISO 6465:2009 Spices – Cumin (Cuminum cyminum L.) – Specification B
ISO 17604: 2003/Amd Microbiology of food and animal feeding stuffs – Carcass sampling for microbiological analysis – XZ
1: 2009 Amendment 1: Sampling of poultry carcasses
ISO 26323:2009 * Milk products – Determination of the acidification activity of dairy cultures by continuous pH measurement G
(CpH)
ISO 30024:2009 Animal feeding stuffs – Determination of phytase activity F
TC 38 Textiles
ISO 9867:2009 Textiles – Evaluation of the wrinkle recovery of fabrics – Appearance method L
TC 43 Acoustics
ISO 362-2:2009 * Measurement of noise emitted by accelerating road vehicles – Engineering method – Part 2: L category Q
TC 61 Plastics
ISO 527-5:2009 Plastics – Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced F
plastic composites
ISO 1889:2009 Reinforcement yarns – Determination of linear density C
ISO 4892-2: 2006/Amd Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps – Amendment 1 XZ
1: 2009
ISO 9370:2009 Plastics – Instrumental determination of radiant exposure in weathering tests – General guidance and basic H
test method
ISO 22007-1: 2009 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 1: General principles J
ISO 25762:2009 * Plastics – Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced N
polymer composites
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO 10424-2: 2007** Petroleum and natural gas industries – Rotary drilling equipment – Part 2: Threading and gauging of rotary X
shouldered thread connections
ISO 13500: 2008/Cor 1: * Petroleum and natural gas industries – Drilling fluid materials – Specifications and tests – Technical free
2009 Corrigendum 1
ISO 13623:2009 * Petroleum and natural gas industries – Pipeline transportation systems X
TC 85 Nuclear energy
ISO/ASTM 51205:2009 * Practice for use of a ceric-cerous sulfate dosimetry system F
ISO/ASTM 51538:2009 * Practice for use of the ethanol- chlorobenzene dosimetry system F
ISO/ASTM 51818:2009 * Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 F
keV
ISO/ASTM 51900:2009 * Guide for dosimetry in radiation research on food and agricultural products F
TC 92 Fire safety
ISO/TR 834-2: 2009 * Fire-resistance tests – Elements of building construction – Part 2: Guidance on measuring uniformity of G
furnace exposure on test samples
ISO 13943: 2008** Fire safety – Vocabulary U
ISO 23932:2009 Fire safety engineering – General principles J
TC 96 Cranes
ISO 4310: 2009** Cranes – Test code and procedures E
TC 106 Dentistry
ISO 3630-4: 2009 Dentistry – Root canal instruments – Part 4: Auxiliary instruments F
ISO 4073:2009 Dentistry – Information system on the location of dental equipment in the working area of the oral health B
care provider
ISO 9168:2009 Dentistry – Hose connectors for air driven dental handpieces E
TC 113 Hydrometry
ISO/TR 23211: 2009 * Hydrometry – Measuring the water level in a well using automated pressure transducer methods U
TC 117 Fans
ISO 27327-1: 2009 * Fans – Air curtain units – Part 1: Laboratory methods of testing for aerodynamic performance rating N
TC 153 Valves
ISO 6552:1980/ Cor * Automatic steam traps – Definition of technical terms – Technical Corrigendum 1 free
1:2009
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23553-1: 2007** Safety and control devices for oil burners and oil-burning appliances – Particular requirements – Part 1: K
Shut-off devices for oil burners
TC 227 Springs
ISO 26909:2009 Springs – Vocabulary X
Standards confirmed
The following International Standards are confirmed for a five year period:
TC 2 Fasteners
ISO 273:1979 (reconfirmed)
ISO 8839:1986 (reconfirmed)
TC 4 Rolling bearings
ISO 76:2006
ISO 6811:1998 (reconfirmed)
ISO 7063:2003
ISO 9628:2006
ISO 12240-1:1998 (reconfirmed)
ISO 12240-2:1998 (reconfirmed)
ISO 12240-3:1998 (reconfirmed)
ISO 12240-4:1998 (reconfirmed)
ISO 15312:2003
TC 22 Road vehicles
ISO 6546:2006
ISO 7747:1983 (reconfirmed)
ISO 13215-1:2006
ISO 13216-3:2006
TC 29 Small tools
ISO 666:2006
ISO 1085:1999 (reconfirmed)
ISO 3919:2005
ISO 5429:2005
ISO 6103:2005
ISO 6106:2005
ISO 6344-3:1998/ Cor 1:1999
ISO 6344-3:1998 (reconfirmed)
ISO 9242:1988 (reconfirmed)
ISO 9243:1988 (reconfirmed)
TC 34 Food products
ISO 21569:2005
ISO 21570:2005
ISO 21571:2005
ISO 24276:2006
TC 59 Building construction
ISO/TR 8389:1984
ISO/TR 8390:1984
TC 61 Plastics
ISO 61:1976 (reconfirmed)
ISO 119:1977 (reconfirmed)
ISO 120:1977 (reconfirmed)
ISO 172:1978 (reconfirmed)
ISO 3001:1999 (reconfirmed)
ISO 7327:1994 (reconfirmed)
ISO 10082:1999 (reconfirmed)
ISO 14526-1:1999 (reconfirmed)
ISO 14526-2:1999 (reconfirmed)
ISO 14526-3:1999 (reconfirmed)
ISO 14527-1:1999 (reconfirmed)
ISO 14527-2:1999 (reconfirmed)
ISO 14527-3:1999 (reconfirmed)
ISO 14528-1:1999 (reconfirmed)
ISO 14528-2:1999 (reconfirmed)
ISO 14528-3:1999 (reconfirmed)
ISO 14529-1:1999 (reconfirmed)
ISO 14529-2:1999 (reconfirmed)
ISO 14529-3:1999 (reconfirmed)
ISO 14530-1:1999 (reconfirmed)
ISO 14530-2:1999 (reconfirmed)
ISO 14530-3:1999 (reconfirmed)
ISO 14849:1999 (reconfirmed)
ISO 15034:1999 (reconfirmed)
ISO 15038:1999 (reconfirmed)
ISO 15040:1999 (reconfirmed)
ISO 15252-1:1999 (reconfirmed)
ISO 15252-2:1999 (reconfirmed)
ISO 15252-3:1999 (reconfirmed)
TC 63 Glass containers
ISO 9100-2:2005
ISO 9100-3:2005
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO 10426-3:2003
ISO 13501:2005
TC 92 Fire safety
ISO 16312-1:2006
TC 96 Cranes
ISO 9927-3:2005
TC 106 Dentistry
ISO 6873:1998 (reconfirmed)
ISO 22112:2005
TC 122 Packaging
ISO 16467:2003
TC 135 Non-destructive testing
ISO 12713:1998 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 1167-2:2006
ISO/TR 7074:1986
ISO 10508:2006
ISO 14531-3:2006
ISO 15875-2:2003 (reconfirmed)
ISO/TS 15875-7: 2003
ISO/TS 15876-7: 2003
TC 159 Ergonomics
ISO 9241-110:2006
ISO 11064-7:2006
TC 217 Cosmetics
ISO 21149:2006
ISO 22715:2006
ISO 22717:2006
ISO 22718:2006
Standards withdrawn
Period from 10 June to 09 July 2009
TC 43 Acoustics
ISO 362:1998 (replaced by ISO 362-2:2009)