Dap
2217:
Metrology
be straight flank, i.e the wires should lie in a
ange as follows.
SSB -0.853 p to 0.506 p
Metric - 1.01 p to 0.505 p
\ reading is. first taken over: a standard
ylinder with the two wires in position
fetween the cylinder and the micrometer
avils.
‘he standard cylinder is then removed and the
(rew mounted between the centers and a
tading is taken, from the two readings the
jameter under rollers is obtained
Stepl
Effective
diameter
Ci
ierabed | Dei | Bhopal] Pine | Balaeoar | Beng | Chena | Viale | Vian | Tio
From Step 1 procedure micrometer reading Ry
and from Step 2 micro meter reading R; can be
taken.
Let standard cylinder size is $.
<.Bench micrometer reading M=S+(R2 -R,)
Effective diameter =M ~ (2r+OF)
M — (d+20F)
But, OF = OG= FG ......... (1)
From AOAG sin? = OA
2 0G
GG= 1osee8 @
8
sin
From AFCG Tan,
(2) and (3) substituting in (1)
OF =r cosec So Peo ®
fl
Effective diameter
& ( ® P. 8)
=M- df redseeo— rot]
\ 2.4... 2H
»
The best wire
The best wire is the one which makes contact
on the flanks of the thread on the pitch line as
shown in fig. Where points B and C coincide
with D and E
=M-~[ d+ deosee—Feot