0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
48 Ansichten1 Seite
The document discusses Festo's guidelines for packaging and labeling products. It specifies that the Festo logo should be positioned in the top right corner of packaging and labels according to general guidelines. It also provides information on selecting suitable packaging using their packaging selection system program, as well as sources for more details on packaging guidelines and options.
The document discusses Festo's guidelines for packaging and labeling products. It specifies that the Festo logo should be positioned in the top right corner of packaging and labels according to general guidelines. It also provides information on selecting suitable packaging using their packaging selection system program, as well as sources for more details on packaging guidelines and options.
The document discusses Festo's guidelines for packaging and labeling products. It specifies that the Festo logo should be positioned in the top right corner of packaging and labels according to general guidelines. It also provides information on selecting suitable packaging using their packaging selection system program, as well as sources for more details on packaging guidelines and options.
the data base “Festo Standards” Library On packaging too, the Festo logo on “ADELNS11/1/FESTO/DE”: is used in accordance with the “2_Pneu\Festo\Entwicklung\Wiss general guidelines. It is position- en\FN.NSF”: FN 940074-1/2. ed below the imaginary square in This contains detailed data the top righthand corner either regarding the positioning of the directly printed on or on a label. logo, texts and graphic elements on the labels and the positioning In most cases, suitable packaging of labels. can be found quickly and simply via the “packaging selection Further information on the system”. With this program, subject of packaging can be appropriate packaging, including obtained from Department the necessary ancillary packaging KM-PA: vtt@festo.com material can be configured and requested by entering the rele- vant product data. The program is available under “Global Services” – however to date only within Germany.