Beruflich Dokumente
Kultur Dokumente
Features: Benefits:
Solutions Caterpillar offers a wide range of standard and specialized excavator buckets
with solutions for trenching, excavating, loading and finishing. Each bucket is
designed and tested to function as an integral part of your excavator.
Reliable Cat® Buckets are developed and tested along with your Cat excavator to provide
exceptional performance and reliability.
Made-to-last Cat Buckets are designed and built to Caterpillar specifications - guaranteeing
quality and durability. High-strength tempered steel provides durability without
requiring thick and heavy plates. The optimised design provides longer life and
larger payloads.
Performance Cat excavators are the industry standard. Cat Excavator Buckets match the
machine to the job and provide the best possible performance in your particular
application.
Buckets for Hydraulic Excavators Buckets for Hydraulic Excavators
2 3
Buckets for Hydraulic Excavators Buckets for Hydraulic Excavators
For digging in low impact, lower The most popular excavator bucket For higher abrasion conditions such as For very high abrasion conditions
abrasion materials such as dirt, loam, style. A good “center line” choice, or shot rock and sandstone. including high quartzite granite.
and mixed compositions of dirt and fine starting point, when application
gravel. conditions vary. Example: Digging conditions where tip Example: Digging conditions where tip
life ranges from 200 to 400 hours with life is less than or equal to 200 hours
Example: Digging conditions in which For a wide range of impact and abrasion Penetration Plus tips. with Extra Duty tip.
General Duty tip life exceeds 800 hours. conditions including mixed dirt, clay and
sand & gravel. Example: Digging condi- - Bottom
wear plates up to 50% thicker -C
orner (or heel) shroud A, Base Edge
Typically larger General Duty Buckets tions where Penetration Plus tip life than Heavy Duty Buckets. End Protector (BEEPs) B, base edge
are the most popular sizes, and are used ranges from 400 to 800 hours. segment C, liners D.
by site developers to mass excavate in
- Side wear plates up to 40% larger than
low abrasion applications. Heavy Duty Buckets are recommended Heavy Duty Buckets for added ide wear plates are larger and
-S
for trenching in utility work and for the protection against abrasive and Sidebar protection has been added for
- Lighter structures decrease load time general contractor working in a variety gouging wear. protection against abrasion and
and increase the weight that can be of different situations. gouging wear.
lifted. -S
pade edge with adapters are sized to
- Thicker bottom and side wear plates accommodate higher abrasion -S
pade edge with adapters are sized to
- Standard size adapters and tips. than General Duty Buckets, increasing conditions while maintaining ease of accommodate higher abrasion
bucket wear life. penetration. conditions.
- Sidebars are pre-drilled for optional
sidecutters and sidebar protectors. - Sidebars are pre-drilled for optional -S
idebars are pre-drilled for optional
Note:
sidecutters and sidebar protectors. sidebar protectors.
For indication only. Bucket may require optional GET and wear
products. Please contact your dealer for support.
General Duty Bucket with Leveling Edge
GD-LE
These buckets are used in the same material and soils
as the GD bucket.
4 5
Buckets for Hydraulic Excavators Buckets for Hydraulic Excavators
Width range: 1250 – 1300 mm Width range: 1250 – 1500 mm Width range: 1250 – 1600 mm
Capacity range: 0.74 – 0.98 cum Capacity range: 0.86 – 2.04 cum Capacity range: 0.98 – 2.16 cum
Profile Buckets are available with sides
For digging up brick roads and For light demolition work, spading, For heavy demolition work and rock that can be adjusted from 30 to 45
pavements, loading, sieving and light sieving and breaking up asphalt and handling applications. Buckets are made degrees relative to the horizon (BG) as
spading work. Buckets are available with pavements. Buckets are available with of wear resistant steel types. Buckets well as in a fixed configuration with a
bare base edge only. J-system adapters or without adapters. are available with J-system adapters or side angle of 45 degrees (DG) relative to
without adapters. the horizon. These buckets are used to
-Light construction and large bucket - More rigid construction that allows
easily dig out ditches.
opening for easy penetration higher breakout force - T hicker vertical bars and more wear
underneath road bricks and asfalt resistant materials used to break up
concrete
DC
DC TDC
DC
6 7
Ground Engaging Tools for Hydraulic Excavators
Ideal for use in shot rock and tight bank Heavy Duty Sidecutter
loading where both impact and abrasive For tough digging
conditions. More wear
conditions are moderate to high.
Penetration Long Life Heavy Penetration material. Covers more
of sidebar for en-
Used on larger machines when working hanced protection of
in sand, gravel and shot rock. the bucket. Scalloped
Maximum wear material., profile improves bucket
penetration and machine
Heavy Duty Abrasion Heavy Abrasion performance.
Provides a clean floor. Increases capacity
Strikeoff Sidecutter
with less spillage.
Half-arrow shaped to
Wide Wide provide better
penetration than bare
Provides maximum gouging and
bucket, while protecting
penetration capabilities, less wear the lower bucket sides
Sharp/Corner Sharp Spike materials are self-sharpening. and corners. Use in
moderate- to light
Used for enhanced fracture capability.
conditions. Can be
Less penetration than sharp tip.
stacked for more
More wear material than sharp tip. protection.
Twin Sharp Double Spike
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at HEHX3206-06 (Q3-2015)
www.cat.com
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.