Beruflich Dokumente
Kultur Dokumente
Electrofusion Fittings
Couplers 9
Reducers 9
Equal Tees 10
The information contained within this brochure is provided as
90º Elbows 10 a guide to Innogaz products and product dimensions. For any
45º Elbows 10 technical information or installation procedures please contact us
Transition Fittings 11-13 for further details.
Repair Saddles 20
To obtain further copies of this brochure please contact
Tapping Ball Valves 20 our Commercial Team on 00 377 9205 5000 or email your
requirements to info@innogaz.com
As part of the worlds largest plastics manufacturer – Aliaxis and with over
25 years experience in the electrofusion field, our fittings provide quality
pipeline solutions to gas and water companies and projects across the world.
The quality and reliability of our products is ensured as we work to ISO 9001.
Specific standards for gas and water distribution are also held and you will
find details on this later in the brochure.
You will find our efficient and friendly commercial team supportive throughout
the whole of the enquiry, ordering and delivery process. From delivery or
technical questions – whatever your query we are confident we will respond to
you in an informative and timely fashion.
Within this brochure we hope to provide you with an insight into the products
we have on offer.
Should you have any queries or would like to place an order, please contact us
by calling 00 377 92 05 50 00.
Several types of PE exist. Each type is characterised by its In no case should the pressure be higher than the values
minimal required stress. PE used in electrofusion fittings has the authorised by the current regulations in each country.
following characteristics:
Electrofusion Cycle
Terminal
1 Pop up Coils Top of
2
Indicator Coupler Terminal
Pipe Pipe
Pipe Pipe
3 4
Freeze Freeze
Terminal
Material surrounding coil starts to melt. Area of melt extends leading to expansion towards
pipe surface.
Freeze Freeze
Freeze Freeze
5 6 Freeze Freeze
Heat transfers to pipe wall and pipe material starts Melt solidifies at the start of the cold zones, thereby
to melt. sealing the melt zone. Further input of energy causes
increase in melt pressure.
7 Freeze Freeze
Traceability
Traceability bar codes containing specific information relating to
the manufacture of the product are shown on all electrofusion
products.
ISO 8085-2 Polyethylene fittings for use with polyethylene NF EN 13244-3 Plastic piping systems for buried and
pipes for the supply of gaseous fuels – metric aboveground pressure systems for water
series – specifications – Part 2: Spigot fittings for general purposes, drainage and
for butt-fusion or for socket-fusion using sewerage – polyethylene – Part 3: Fittings.
heated tools and for use with electrofusion
fittings. NF EN 13244-4 Plastic piping systems for buried and
aboveground pressure systems for water
ISO 8085-3 Polyethylene fittings for use with polyethylene for general purposes, drainage and
pipes for the supply of gaseous fuels – metric sewerage – polyethylene – Part 4: Valves.
series – specification – Part 3: Electrofusion
fittings. NF EN 13244-5 Plastic piping systems for buried and
aboveground pressure systems for water
ISO 10838-1 Mechanical fittings for polyethylene piping for general purposes, drainage and
systems for the supply of gaseous fuels – Part sewerage – polyethylene – Part 5: Fitness
1: Metal fittings for pipe of nominal outside for purpose of the system.
diameter less than or equal to 63mm.
XP CEN/TS 13244-7 Plastic piping systems for buried and
ISO 10838-2 Mechanical fittings for polyethylene piping aboveground pressure systems for water
systems for the supply of gaseous fuels – Part for general purposes, drainage and
2: Metal fittings for pipes of nominal outside sewerage – polyethylene – Part 7: Guidance
diameter greater than 63mm. for assessment of conformity.
ISO 12176-4 Plastic pipes and fittings – equipment for AS/NZS 4020 Testing of products for use in contact with
fusion jointing polyethylene systems – Part 4: drinking water.
Traceability coding.
Product Markings
Where applicable, our fittings incorporate the following
information:
• Material
• SDR
• Nominal Size (mm)
• Fusion Time
• Cooling Time
• Application Information (Gas or Water)
• Certifying Symbols and Standards
• System Voltage if Applicable
Larger SDR17
Larger sizes available
sizes available - 450, soon - 450,
500, 560, 630500,
and560, 630–and
710mm 710mm
Contact us –
forContact
furtherusinformation.
for further information.
ElectrofusionReducers
Electrofusion Reducers PE100
PE100Black
Black
Nominal Bore
Nominal Bore Rating
Rating Rating Individual
Dd11 xx dD22 Product
Product A
A BB LL11 LL22 for
for for
for Weight
Weight
(mm) Code (mm) (mm) (mm) (mm) SDR Gas Water (kg)
(mm) Code (mm) (mm) (mm) (mm) SDR Gas Water (kg)
25 x 20 1 101 410 37 80 35.5 37 11 < 10 Bar < 16 Bar 0.05
25 x 20 1 101 410 37 80 35.5 37 11 < 10 Bar < 16 Bar 0.05
32 x 20 1 101 412 44.5 82.5 36.5 40.5 11 < 10 Bar < 16 Bar 0.05
32 x 20 1 101 412 44.5 82.5 36.5 40.5 11 < 10 Bar < 16 Bar 0.05
32 x 25 1 101 413 44.5 83.5 38 41 11 < 10 Bar < 16 Bar 0.07
32 x 25 1 101 413 44.5 83.5 38 41 11 < 10 Bar < 16 Bar 0.07
40 x 32 1 101 417 56 111.5 47 53 11 < 10 Bar < 16 Bar 0.12
40 x 32 1 101 417 56 111.5 47 53 11 < 10 Bar < 16 Bar 0.12
50 x 40 1 101 422 65 103.5 43.5 47 11 < 10 Bar < 16 Bar 0.12
50 x 40 1 101 422 65 103.5 43.5 47 11 < 10 Bar < 16 Bar 0.12
63 x 32 1 101 426 81 121 41 59 11 < 10 Bar < 16 Bar 0.18
B 63 x 32 1 101 426 81 121 41 59 11 < 10 Bar < 16 Bar 0.18
63 x 40 1 101 427 81 128.5 48 59 11 < 10 Bar < 16 Bar 0.21
63 x 40 1 101 427 81 128.5 48 59 11 < 10 Bar < 16 Bar 0.21
63 x 50
63 x 50 11 101
101 428
428 79
79 131
131 52
52 61
61 11
11 < 10 Bar
< 10 Bar < 16 Bar
< 16 Bar 0.22
0.22
90 x 63 1 101 442 113 175 54.5 80 11 < 10 Bar < 16 Bar 0.60
90 x 63 1 101 442 113 175 54.5 80 11 < 10 Bar < 16 Bar 0.60
110
110 xx90
90 11 101
101 452
452 136
136 189
189 72
72 85
85 11
11 << 10
10 Bar
Bar < 16 Bar
< 16 Bar 0.90
0.90
125
125 xx90
90 11 101
101 461
461 155
155 210
210 67
67 90
90 11
11 << 10
10 Bar
Bar < 16 Bar
< 16 Bar 1.20
1.20
d2 d1 A 125
125 xx110
110 11 101
101 462
462 156
156 201
201 73.5
73.5 95
95 11
11 << 10
10 Bar
Bar < 16 Bar
< 16 Bar 1.30
1.30
160
160 xx110
110 11 101
101 483
483 195
195 254
254 72
72 101
101 11
11 << 10
10 Bar
Bar < 16 Bar
< 16 Bar 2.20
2.20
180
180 xx125
125 11 101
101 496
496 214
214 276
276 83
83 110
110 11
11 << 10
10 Bar
Bar < 16 Bar
< 16 Bar 2.60
2.60
L1 L2
9
7
Z1
B
Electrofusion90º
Electrofusion 90ºElbows
Elbows PE100
PE100Black
Black
Nominal
Nominal Rating
Rating Rating
Rating Individual
Individual
Bore
BoreDD Product
Product AA CC ZZ for
for for
for Weight
Weight
(mm) Code (mm) (mm) (mm) SDR Gas Water (kg)
(mm) Code (mm) (mm) (mm) SDR Gas Water (kg)
20 3 701 020 28.5 42 12 11 < 10 Bar < 16 Bar 0.04
20 3 701 020 28.5 42 12 11 < 10 Bar < 16 Bar 0.04
25 3 704 025 36 53.5 16 11 < 10 Bar < 16 Bar 0.06
25 3 701 025 35 53.5 15.5 11 < 10 Bar < 16 Bar 0.06
32 3 704 032 43 58.2 19 11 < 10 Bar < 16 Bar 0.08
32 3 701 032 42 58 18.5 11 < 10 Bar < 16 Bar 0.07
40 3 704 040 53 68.9 23 11 < 10 Bar < 16 Bar 0.13
40 3 701 040 52.5 69 22.5 11 < 10 Bar < 16 Bar 0.15
50 3 704 050 65.3 74.5 27 11 < 10 Bar < 16 Bar 0.20
50 3 701 050 65 74.5 27 11 < 10 Bar < 16 Bar 0.21
63 3 704 063 81.5 88 35 11 < 10 Bar 16 Bar 0.35
63 3 701 063 81.5 88 35 11 < 10 Bar <<16 Bar 0.37
75 3 701 075 96 95 40 11 < 10 Bar < 16 Bar 0.50
75 3 701 075 96 95 40 11 < 10 Bar < 16 Bar 0.50
C 90
90 3 701 090
3 701 090 114.5
114.5 118
118 49
49 11
11 < 10 Bar
< 10 Bar 16 Bar
<<16 Bar 0.90
0.90
Z 110
110 33701
701110
110 137
137 130
130 60
60 11
11 << 10
10Bar
Bar 16 Bar
<<16 Bar 1.30
1.30
125
125 33701
701125
125 155.5
155.5 143
143 67
67 11
11 << 10
10Bar
Bar 16 Bar
<<16 Bar 1.80
1.80
160
160 33701
701160
160 199
199 171
171 87
87 11
11 << 10
10Bar
Bar < 16 Bar
< 16 Bar 2.60
2.60
A
180
180 33701
701180
180 222
222 185
185 98
98 11
11 << 10
10Bar
Bar < 16 Bar
< 16 Bar 4.40
4.40
Electrofusion45º
Electrofusion 45ºElbows
Elbows PE100
PE100Black
Black
Nominal
Nominal Rating
Rating Rating Individual
Bore
BoreDD Product
Product AA CC ZZ for
for for
for Weight
Weight
(mm) Code (mm) (mm) (mm) SDR Gas Water (kg)
(mm) Code (mm) (mm) (mm) SDR Gas Water (kg)
25 3 501 025 35 45 7 11 < 10 Bar < 16 Bar 0.05
25 3 501 025 35 45 7 11 < 10 Bar < 16 Bar 0.05
32 3 501 032 42 48 8 11 < 10 Bar < 16 Bar 0.06
32 3 501 032 42 48 8 11 < 10 Bar < 16 Bar 0.06
40 3 501 040 52.5 54.5 9.5 11 < 10 Bar < 16 Bar 0.11
40 3 501 040 52.5 54.5 9.5 11 < 10 Bar < 16 Bar 0.11
50 3 501 050 65.5 56.5 11.5 11 < 10 Bar < 16 Bar 0.17
50 3 501 050 65.5 56.5 11.5 11 < 10 Bar < 16 Bar 0.17
63 3 501 063 81 65 15 11 < 10 Bar < 16 Bar 0.24
63 3 501 063 81 65 15 11 < 10 Bar < 16 Bar 0.24
75 3 501 075 96 72.5 17.5 11 < 10 Bar < 16 Bar 0.50
75 3 501 075 96 72.5 17.5 11 < 10 Bar < 16 Bar 0.50
90 3 501 090 114.5 89 20 11 < 10 Bar < 16 Bar 0.80
90 3 501 090 114.5 89 20 11 < 10 Bar < 16 Bar 0.80
110 3 501 110 136 97 27 11 < 10 Bar < 16 Bar 1.00
110 3 501 110 136 97 27 11 < 10 Bar < 16 Bar 1.00
C 125 3 501 125 155.5 105 30 11 < 10 Bar < 16 Bar 1.40
125 3 501 125 155.5 105 30 11 < 10 Bar < 16 Bar 1.40
Z 160
160 3 501 160
3 501 160 198
198 120
120 36
36 11
11 < 10 Bar
< 10 Bar < 16 Bar
< 16 Bar 2.60
2.60
180
180 3 3501
501180
180 223
223 128
128 4040 1111 <<10
10Bar
Bar < 16 Bar
< 16 Bar 3.40
3.40
10
8
D2 D1
L1
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Male
- Male - 90º
- 90º Elbow
Elbow PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xxx inch)
(mm DD22 Product
Product
Code LL11
(mm) SDR
for
for
Water
Weight
Weight
(kg)
(mm x 3inch) Code (mm) SDR Water (kg)
25 x ⁄4 1 741 637 74 11 < 16 Bar 0.31
25xx1
32
3⁄4 11741 637
741 644 74
81.5 11
11 < 16
< 16 Bar
Bar 0.31
0.38
32 x 1
40 x 11⁄4
11741 644
741 651
81.5
94.5
11
11
< 16 Bar
< 16 Bar
0.38
0.44
40 x 11⁄4
50 x 11⁄2
11741 651
741 658
94.5
95.5
11
11
<< 16 Bar
16 Bar
0.44
0.85
50 x 11⁄2
63 x 2
11741 658
741 665
95.5
118
11
11
<< 16 Bar
16 Bar
0.85
1.17
D1 63 x 2 1 741 665 118 11 < 16 Bar 1.17
63 x 2 1 721 665 118 11 < 16 Bar 1.02
D2
L1
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Male
- Male - 45º
- 45º Elbow
Elbow PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xxx inch)
(mm DD22 Product
Product
Code LL11
(mm) SDR
for
for
Water
Weight
Weight
(kg)
(mm x 3inch) Code (mm) SDR Water (kg)
25 x ⁄4 1 731 637 74 11 < 16 Bar 0.26
25 x
32 x 1
3⁄4 11731 637
731 644
74
81.5
11
11
< 16 Bar
< 16 Bar
0.26
0.30
32 x 1
40 x 11⁄4
11731 644
731 651
81.5
94.5
11
11
< 16 Bar
< 16 Bar
0.30
0.41
40 x 11⁄4
50 x 11⁄2
11731 651
731 658
94.5
95.5
11
11
<< 16 Bar
16 Bar
0.41
0.98
50 x 11⁄2 1 731 658 95.5 11 < 16 Bar 0.98
63 x 2 1 731 665 118 11 < 16 Bar 1.10
63 x 2 1 731 665 118 11 < 16 Bar 1.10
L1 63 x 2 1 721 665 118 11 < 16 Bar 1.02
D1
D2
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Female
- Female - Straight
- Straight PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xx DD22 Product
Product LL11 for
for Weight
Weight
(mm x inch) Code (mm) SDR Water (kg)
(mm x inch) Code (mm) SDR Water (kg)
20 x 1⁄2 1 821 630 55 11 < 16 Bar 0.15
20 x 1⁄2 1 821 630 55 11 < 16 Bar 0.15
25 x 3⁄4 1 821 637 59 11 < 16 Bar 0.17
25 x 3⁄4 1 821 637 59 11 < 16 Bar 0.17
32 x 1 1 821 644 63.5 11 < 16 Bar 0.25
32 x 1 1 821 644 63.5 11 < 16 Bar 0.25
40 x 11⁄41 1 821 651 74.5 11 < 16 Bar 0.38
40 x 1 ⁄4 1 821 651 74.5 11 < 16 Bar 0.38
50 x 11⁄21 1 821 658 73.5 11 < 16 Bar 0.84
50 x 1 ⁄2 1 821 658 73.5 11 < 16 Bar 0.84
63 x 2 1 821 665 93 11 < 16 Bar 0.89
63 x 2 1 821 665 93 11 < 16 Bar 0.89
D2 D1
L1
11
9
L1
D2
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Female
- Female - 45º
- 45º Elbow
Elbow PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xxx inch)
(mm DD22 Product
Product
Code LL11
(mm) SDR
for
for
Water
Weight
Weight
(kg)
(mm x 3inch) Code (mm) SDR Water (kg)
25 x ⁄4 1 831 637 59 11 < 16 Bar 0.18
25 x
32 x 1
3⁄4 11831 637
831 644
59
63.5
11
11
< 16 Bar
< 16 Bar
0.18
0.27
32 x1
40 x 11⁄4
11831 644
831 651
63.5
74.5
11
11
< 16 Bar
< 16 Bar
0.27
0.42
40 x 11 1⁄4 1 831 651 74.5 11 < 16 Bar 0.42
50 x 1 ⁄2 1 831 658 73.5 11 < 16 Bar 0.85
50 x 11⁄2 1 831 658 73.5 11 < 16 Bar 0.85
63 x 2 1 831 665 93 11 < 16 Bar 0.90
L1 63 x 2 1 831 665 93 11 < 16 Bar 0.90
D1
D2
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Travelling
- Travelling NutNut - Straight
- Straight PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xx DD22 Product
Product LL11 for
for Weight
Weight
(mm x inch) Code (mm) SDR Water (kg)
(mm x inch) Code (mm) SDR Water (kg)
25 x 3⁄4 1 921 637 55 11 < 16 Bar 0.25
25 x 3⁄4 1 921 637 55 11 < 16 Bar 0.25
25 x 1 1 921 638 56.5 11 < 16 Bar 0.26
25 x 1 1 921 638 56.5 11 < 16 Bar 0.26
32 x 1 1 921 644 59.5 11 < 16 Bar 0.28
32 x 1 1 921 644 59.5 11 < 16 Bar 0.28
32 x 11⁄4 1 921 645 66 11 < 16 Bar 0.30
32 x 11⁄4 1 921 645 66 11 < 16 Bar 0.30
50 x 2 1 921 659 92 11 < 16 Bar 0.65
50 x 2 1 921 659 92 11 < 16 Bar 0.65
63 x 2 1 921 665 112 11 < 16 Bar 0.95
63 x 2 1 921 665 112 11 < 16 Bar 0.95
D2 D1
L1
ElectrofusionBrass
Electrofusion BrassTransition
TransitionFitting
Fitting - Travelling
- Travelling NutNut - 90º
- 90º Elbow
Elbow PE100
PE100Black
Black
Rating
Rating Individual
Individual
DD11 xx DD22 Product
Product LL11 for
for Weight
Weight
(mm x inch) Code (mm) SDR Water (kg)
(mm x inch) Code (mm) SDR Water (kg)
25 x 3⁄4 1 941 637 55 11 < 16 Bar 0.33
25 x 3⁄4 1 941 637 55 11 < 16 Bar 0.33
25 x 1 1 941 638 56.5 11 < 16 Bar 0.34
25 x 1 1 941 638 56.5 11 < 16 Bar 0.34
32 x 1 1 941 644 59.5 11 < 16 Bar 0.36
32 x 1 1 941 644 59.5 11 < 16 Bar 0.36
32 x 11⁄4 1 941 645 66 11 < 16 Bar 0.38
32 x 11⁄4 1 941 645 66 11 < 16 Bar 0.38
50 x 2 1 941 659 92 11 < 16 Bar 0.73
50 x 2 1 941 659 92 11 < 16 Bar 0.73
D1 63 x 2 1 941 665 112 11 < 16 Bar 1.03
63 x 2 1 941 665 112 11 < 16 Bar 1.03
D2
L1
12
10
D2
L1
ElectrofusionPE/Steel
Electrofusion PE/SteelTransition
TransitionFittings
Fittings PE100
PE100Black
Black
Rating
Rating Individual
DD1 1xxxDinch)
(mm
D22 Product
Product
Code
L
L(mm) LL1 1
(mm)
LL2 2
(mm)
S1
(mm)S1
S2
(mm) S2 SDR
forfor
Gas
Weight
Weight
(kg)
(mm x inch) Code (mm) (mm) (mm) (mm) (mm) SDR Gas (kg)
25 x ⁄4
3
6 311 025 495 160 335 2.6 3.0 11 <10 Bar 0.70
2532xx 13⁄4 6 311 025
6 311 032
495495 160
160
335
335 3.2
2.6 3.0
3.0 11
11 <10 Bar
<10 Bar
0.70
1.10
3240xx111⁄4 6 311 032
6 311 040
495495 160
160
335
335 3.2
3.2 3.7
3.0 11
11 <10 Bar
<10 Bar
1.10
1.30
4050xx1111⁄4⁄ 6 311 040
6 311 050
495495 160
160
335
335 3.2
3.2 4.6
3.7 11
11 <10
<10 Bar
Bar 1.30
2.00
2
50 x 11⁄2 6 311 050 495 160 335 3.2 4.6 11 <10 Bar 2.00
63 x 2 6 311 063 520 185 335 3.6 5.8 11 <10 Bar 2.90
63 x 2 6 311 063 520 185 335 3.6 5.8 11 <10 Bar 2.90
90 x 3 6 311 090 525 190 335 4.0 8.2 11 <10 Bar 4.60
90 x 3 6 311 090 525 190 335 4.0 8.2 11 <10 Bar 4.60
110 x 4 6 311 110 525 190 335 4.5 10.0 11 <10 Bar 6.40
110 x 4 6 311 110 525 190 335 4.5 10.0 11 <10 Bar 6.40
125 x 4 6 311 125 525 190 335 4.5 11.4 11 <10 Bar 6.40
125 x 4 6 311 125 525 190 335 4.5 11.4 11 <10 Bar 6.40
160 x 6 6 311 160 670 200 470 5.0 14.6 11 <10 Bar 16.50
160 x 6 6 311 160 670 200 470 5.0 14.6 11 <10 Bar 16.50
180 x 6 6 311 180 670 200 470 5.0 16.4 11 < 10 Bar 22.50
180 x 6 6 311 180 670 200 470 5.0 16.4 11 < 10 Bar 22.50
200 x 8 6 311 200
200 x 8 6 311 200 720720 200
200 520
520 5.6
5.6 18.2
18.2 11
11 < 10 Bar
< 10 Bar 27.50
27.50
D1 D2 225 x 8 6 311 225
225 x8 6 311 225 680680 200
200 500
500 5.6
5.6 20.5
20.5 11
11 < 10 Bar
< 10 Bar 30.00
30.00
S1 L2 L1 S2 250 xx10
250 10 6 311
6 311 250250 720720 220
220 500
500 6.36.3 22.7 22.7 11 11 < <1010Bar
Bar 42.00
42.00
L 315xx12
315 12 6 311
6 311 315315 850850 350
350 500
500 8.08.0 28.6 28.6 11 11 < <1010Bar
Bar TBA
TBA
TBA - To be advised
TBA - To be advised.
13
11
14
INNOGAZ
Electrofusion Under Clamping Tapping Tees PE100 Black
Nominal Rating Rating Individual
Bore d x d1 Product A B Z1 Z2 Punch Ø Clamping for for Weight
(mm) Code (mm) (mm) (mm) (mm) (mm) system SDR Gas Water (kg)
INNOGAZ 40 x 20
Nominal
40 x 25
Bore d x d1
40 x 32
(mm)
2 071 415
2 071 416
Product
2 071 417
Code
105 108
105 108
A
105 108
(mm)
B
72
75
(mm) (mm)
Z1
77
45
45
18.5
18.5
Z2 punch Ø Clamping
45
(mm) 18.5
(mm)
1
1
1
system
11
11
11
< 10 Bar
Rating
< 10 Bar
SDR < 10 Bar
for
Gas
< 16 Bar
Rating
< 16 Bar
for
< 16 Bar
Water
0.36
Individual
0.37
Weight
0.38
(kg)
50 x 20 2 071 419 105 108 72 50 20 1 11 < 10 Bar < 16 Bar 0.36
Electrofusion Under Clamping Tapping Tees - Inno 3 - NEW 63xx25
50 32 22 111 426 105
071 420 130 108108 11575 52
50 26
20 11 11 11 < 10< Bar
10 Bar PE100 Black
<<1616Bar
Bar
0.59
0.37
75xx32
Nominal
50 32 22 111 432 105
071 421 140 108108 12577 58
50 26
20 13 11 11 < 10<Rating
10 Bar
Bar <<1616Bar
Bar
Rating 0.58
Individual
0.38
Bore
90xdx20
63 x32d1 22Product
111
071 424 A
439 105
140 B
108
108 Z1
125
72 Z2 punch
65
57 26 Ø Clamping
20 1 or3 3 11 11 < 10< BarforBar
10 for
<<1616 Bar
Bar Weight
0.59
0.40
(mm)
110
63 xx25 32 Code425
22 111
071 447 (mm)
140 (mm)
105 108 (mm)
75 (mm)
135 75
57 (mm)
26
20 1system
or3 3 11SDR GasBar
11 < 10< Bar
10 Water
<<1616Bar
Bar (kg)
0.60
0.41
63xx32
63 32 22 111 426
071 426 130
140 108 115
456 105 77 52
57 26
20 1 or13 3 11 11 < 10< Bar
10 Bar <<1616Bar
Bar 0.59
0.42
INNO 3
125 x 32
200 456 140 108 135 120
2 111 502 83 26 3 11 < 10 Bar < 16 Bar 0.61
0.65
LOW VOLUME
1 – Permanent PE UnderclampZ 90 x 25 2 071 438 105 108 75 70 20 3 11 < 10 Bar < 16 Bar 0.42
d
2
140 x 32
225 2 111 466 140 108 135 133
516 90 26 3 11 < 10 Bar < 16 Bar 0.62
0.66
3 – Permanent Strap Underclamp 90 x 32 2 071 439 105 108 77 70 20 3 11 < 10 Bar < 16 Bar 0.43
160 xx 20
110
32 22 111
071
477 105
445
140 108108 13572
100
80
26
20 3
3 11
11 < 10< Bar
10 Bar < 16 Bar
< 16 Bar
0.63
0.42
See page 15 for further details. For Tapping Tee and Coupler use code 2121 plus last three figures i.e. 2 121 516 for 225 x 32.
Clamp Types Z1 180 x
110 x 25 32 2 111 489
2 071 446 140
105 108108 135
75 110
80 26
20 33 11 11 < 10 Bar
< 10 Bar <<1616Bar
Bar 0.64
0.43
1 – Permanent PE Underclamp 200 xx 32
110 32 22 111 502 105
071 448 140 108108 13577 120
80 26
20 33 11 11 < 10< Bar
10 Bar <<1616Bar
Bar 0.65
0.44
3 – Permanent Strap Underclamp 225 xx 20
125 32 22 111 516 105
071 454 140 108 135 72 133
88 26
20 33 11 11 < 10< Bar
10 Bar <<1616Bar
Bar 0.66
0.45
125 x 25 2 071 455 105 108 75 88 20 3 11 < 10 Bar < 16 Bar 0.46
See page 15 for further details. For Tapping Tee and Coupler use code 2121 plus last three figures i.e. 2 121 516 for 225 x 32.
Z2 125 x 32 2 071 456 105 108 77 88 20 3 11 < 10 Bar < 16 Bar 0.47
A
140 x 20 2 071 464 105 108 72 95 20 3 11 < 10 Bar < 16 Bar 0.45
Z1 140 x 25 2 071 465 105 108 75 95 20 3 11 < 10 Bar < 16 Bar 0.46
140 x 32 2 071 466 105 108 77 95 20 3 11 < 10 Bar < 16 Bar 0.47
160 x 20 2 071 475 105 108 72 105 20 3 11 < 10 Bar < 16 Bar 0.46
Z2
A
160 x 25 2 071 476 105 108 75 105 20 3 11 < 10 Bar < 16 Bar 0.47
B
160 x 32 2 071 477 105 108 77 105 20 3 11 < 10 Bar < 16 Bar 0.48
Z1
180 x 20 2 071 487 105 108 72 115 20 3 11 < 10 Bar < 16 Bar 0.46
180 x 25 2 071 488 105 108 75 115 20 3 11 < 10 Bar < 16 Bar 0.47
Clamp Types B
200 x 20 2 071 500 105 108 72 125 20 3 11 < 10 Bar < 16 Bar 0.47
A
1 – Permanent PE Underclamp 200 x 25 2 071 501 105 108 75 125 20 3 11 < 10 Bar < 16 Bar 0.47
Electrofusion Under Clamping Tapping Tees
2 – Permanent PE Underclamp and Screws
3 – Permanent Strap Underclamp
225 x 20 2 071 514 105 108 72 138 20 3 11 < 10 Bar PE100 Black
< 16 Bar 0.48
225 x 25 2 071 515 105 108 75 138 20 3 11 < 10 Bar < 16 Bar 0.49
4 – 10 times usable Strap Underclamp Nominal Rating Rating Individual
For Tapping Tee and Coupler use code 2091 plus last three figures i.e. 2 091 477 for 160 x 32.
See page 17 for further details.
B Bore d x d1 Product A B Z1 Z2 punch Ø Clamping for for Weight
(mm) Code (mm) (mm) (mm) (mm) (mm) system SDR Gas Water (kg)
63 x 40 2 111 427 145 108 108 57.5 30 1 or 3 11 < 10 Bar < 16 Bar 0.76
Electrofusion Under Clamping Tapping
63 x 40 Tees
63 x 50*
2 111 427
2 151 428
145 108 108 57.5
145 108 168 57.5
30
30
1 or 3
1 or 3 11
11
< 10 Bar
PE100 Black
< 10 Bar < 16 Bar
< 16 Bar
0.76
0.97
63 x 50* 2 151 428 145 108 168 57.5
Nominal 30 1 or 3 11 < 10 Bar <Rating
16 Bar 0.97
63 x 63* 2 151 429 145 108 189 57.5 30 1 or 3 11 < 10 Rating
Bar < 16 Bar Individual
0.98
Bore
63 d
x x
75 x 40
d
63* 1 2 Product
151 429
2 111 433
A
145 B
108 Z
189
145 108 108 63.5
1 Z
57.52 punch
30
30
Ø Clamping
1 3or 3 11 11 < for
10
< 10 Bar Bar forBar
< 1616Bar
< Weight
0.98
0.79
(mm)
75 Code433 (mm)
22 111 (mm)
108 (mm)
108 (mm)
63.5 (mm) system SDR GasBar <Water (kg)
75 xx50*
40 151 434 145
145 108 168 63.5 30
30 33 11 11 < 10< Bar
10 < 1616Bar
Bar 0.79
0.91
63
75 50* 22 111
75xx63*
40 151 427
434 145
151 435 145 108108 189
108 57.5
168 63.5
63.5 30
30 1 3or
3 3 11 11 < 10< Bar 10 Bar <<1616BarBar 0.76
0.91
1.00
63
75xx40
90 50*
63* 22 151 428 145 108 108
435
111 440 168 63.5
189 57.5
71 30
30 1 3or
3 3 11 11 < 10< Bar 10 Bar <<1616BarBar 0.97
1.00
0.79
63xx50*
90
90 40 151 441
63* 22 111 429 145
440 145 108 189 57.5
108 168
108 71
71 30
30 1 3or
3 3 11 11 < 10< Bar 10 Bar < <1616Bar
Bar 0.98
1.00
0.79
Clamp Types 90
75xx63*
90 50* 22 151
40 151 442
111 433 145
441 145 108108 189 71
108 63.5
168 71 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.01
0.79
1.00
110
90xx40
75 63* 22 151
50* 111 449
442 145
434 145 108108 108
168 81
189 63.571 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 0.80
0.91
1.01
1 – Permanent PE Underclamp
110
75xx50*
63* 2 151
151 449
435 145 108 168 81
189 63.5 30 3 11 < 10 Bar < 16 Bar 1.01
1.00
3 – Permanent Strap Underclamp 110 40 2 111 448 145 108 108 81 30 3 11 < 10 Bar < 16 Bar 0.80
110 x 63* 2 151 448 145 108 189 81 30 3 11 < 10 Bar < 16 Bar 1.02
See page 15 for further details. 90 x 40
110 50* 2 151111 449
440 145 108 168 108 71
81 30 3 11 < 10 Bar < 16 Bar 0.79
1.01
125 x 40 2 111 457 145 108 108 89 30 3 11 < 10 Bar < 16 Bar 0.80
VOLUMEVOLUME
140 x 40 2 111 467 145 108 108 96 30 3 11 < 10 Bar < 16 Bar 0.80
See page 15 for further details. 110xx50*
125
140 50* 22 151
63* 449 145
459
111 468 145 108108 168
168 96
189 81
89 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.01
1.02
0.92
d1
110xx63*
140
140 40 151 469
63* 22 111 450 145 108 189
467 108 96 81
96 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.02
1.01
0.80
MEDIUM
Z2
d
160
125 50* 22 111 478
140xx40
40 457
468 145
145 108108 108
168 106 89
96 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 0.81
0.80
0.92
MEDIUM VOLUME
160
125xx50*
140 50* 22 151
63* 151 479
458 145
469 145 108108 168
168 106
189 89
96 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.02
1.01
Z1
160
125xx63*
63* 22 111
151 480
459 145
160 40 151 478 145 108108 189
189 106
108 89
106 30
30 3
3 11
11 < 10< Bar
10 Bar < <1616Bar
Bar 1.03
1.02
0.81
d1 180 x 40 2 111 490
140 x 50*
160 40 2 151 467 145
111 479 108 108 116
145 108 168 108 106 96 30
30
3
3
11
11
< 10 Bar < 16 Bar
< 10 Bar < 16 Bar
0.82
0.80
1.02
Z2 180 x 50* 2 151 491 145 108 168 116 30 3 11 < 10 Bar < 16 Bar 1.03
d 140 63* 22 111
160 x 50*
180 x 63*
151 468 145 108 168
480 145
151 492
189 106
108 189 116
96 30
30 3
3
11
11 < 10 Bar < 16 Bar
< 10 Bar < 16 Bar
0.92
1.03
1.04
140xx40
180
200 40 151
63* 22 111 469 145
490
111 503 145 108 189 126
108 108
108 96
116 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.01
0.82
0.83
Z1
160xx50*
180
200 40
50* 111
22 151 478 145
491
151 504 145 108 108 126
108 168
168 106
116 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 0.81
1.03
1.04
A 160xx63*
180
200 50* 22 151
63* 479 145
492
151 505 145 108108 189
168 126
189 106
116 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.02
1.04
1.05
160
200xx40
225 63*
40 22 151 480
503 145 108 108
111 517 189
108 139106
126 30
30 33 11 11 < 10< Bar
10 Bar < <1616Bar
Bar 1.03
0.83
0.84
180xx50*
225
200 40
50* 111
22 151 490 145
151 518
504 145 108 108 139
108 168
168 116
126 30
30 33 11 11 < 10< Bar
10 Bar <<1616BarBar 0.82
1.05
1.04
225
180xx63*
200 50* 22 151
63* 151 519 145 108
491 145
505 108 189
168 139
189 116
126 30
30 33 11 11 < 10< Bar
10 Bar <<1616BarBar 1.06
1.03
1.05
B A For225
Tapping
180 63* Tees
x 40 and517
151
2 111 Coupler
492 145use 108
code 2121
189 plus
108 116last three
139 30 figures 3i.e. 2 121 11
519 for 225
< 10xBar
63. < 16 Bar 1.04
0.84
* Medium Volume Tapping Tee plus Reducer
200
225 x 40
50* 2 111
151 503
518 145 108 108
168 126
139 30 3 11 < 10 Bar < 16 Bar 0.83
1.05
Alternative
50* 63mm
200 x 63*
225 2 151outlet
504 tapping
519 145 tees
108 are available.
168
189 126 Please
139 30 contact
3 us for further
11 details.
< 10 Bar < 16 Bar 1.04
1.06 15
200 x 63* 2 151 505 145 108 189 126 30 3 11 < 10 Bar < 16 Bar 1.05
For Tapping Tees and Coupler use code 2121 plus last three figures i.e. 2 121 519 for 225 x 63.
B 225 x 40 2 111 517 145 108 108 139 30 3 11 < 10 Bar < 16 Bar 0.84
* Medium Volume Tapping Tee plus Reducer
225 x 50* 2 151 518 145 108 168 139 30 3 11 < 10 Bar < 16 Bar 1.05
225 x 63* 2 151 519 145 108 189 139 30 3 11 < 10 Bar < 16 Bar 1.06
14
INNOGAZ TESTER Full Brochure.indd 15 17/12/2012 09:46
INNOGAZ
ElectrofusionUnder
Electrofusion UnderClamping
ClampingTapping
Tapping Tees
Tees - Inno
- INNO3 3 - NEW PE100
PE100Black
Black
Nominal
Nominal Rating
Rating Rating
Rating Individual
Bore
Bore dd xx dd11 Product
Product A B
A (mm) ZZ11
B (mm) ZZ22 Punch
punch Ø Clamping for for Weight
(mm) Code (mm) (mm) (mm) Ø Clamping
system SDR Gas for for
Water Weight
(kg)
(mm) Code (mm) (mm) (mm) (mm) (mm) system SDR Gas Water (kg)
63 x 32 2 111 426 130 108 115 52 26 1 11 < 10 Bar < 16 Bar 0.59
63 x 32
75 x 32
22 111 426
111 432
130
140
108
108
115
125
52
58
26
26 3
1 11
11 < 10 Bar
< 10 Bar
< 16 Bar
< 16 Bar
0.59
0.58
75 x 32 2 111 432 140 108 125 58 26 3 11 < 10 Bar < 16 Bar 0.58
90 x 32 2 111 439 140 108 125 65 26 3 11 < 10 Bar < 16 Bar 0.59
90 x 32 2 111 439 140 108 125 65 26 3 11 < 10 Bar < 16 Bar 0.59
INNO 3INNO3
110 x 32 2 111 447 140 108 135 75 26 3 11 < 10 Bar < 16 Bar 0.60
110 x 32 2 111 447 140 108 135 75 26 3 11 < 10 Bar < 16 Bar 0.60
125 x 32 2 111 456 140 108 135 83 26 3 11 < 10 Bar < 16 Bar 0.61
125 x 32 2 111 456 140 108 135 83 26 3 11 < 10 Bar < 16 Bar 0.61
140 x 32 2 111 466 140 108 135 90 26 3 11 < 10 Bar < 16 Bar 0.62
140 x 32 2 111 466 140 108 135 90 26 3 11 < 10 Bar < 16 Bar 0.62
160 x 32 2 111 477 140 108 135 100 26 3 11 < 10 Bar < 16 Bar 0.63
160 x 32 2 111 477 140 108 135 100 26 3 11 < 10 Bar < 16 Bar 0.63
180 x 32 2 111 489 140 108 135 110 26 3 11 < 10 Bar < 16 Bar 0.64
Clamp Types
Clamp Types 180 x 32 2 111 489 140 108 135 110 26 3 11 < 10 Bar < 16 Bar 0.64
200 x 32 2 111 502 140 108 135 120 26 3 11 < 10 Bar < 16 Bar 0.65
1 – Permanent PE PE
1 – Permanent Underclamp
Underclamp 200 x 32 2 111 502 140 108 135 120 26 3 11 < 10 Bar < 16 Bar 0.65
3 – Permanent Strap Underclamp 225 x 32 2 111 516 140 108 135 133 26 3 11 < 10 Bar < 16 Bar 0.66
3 – Permanent Strap Underclamp 225 x 32 2 111 516 140 108 135 133 26 3 11 < 10 Bar < 16 Bar 0.66
See page 17 for further details. For Tapping Tee and Coupler use code 2121 plus last three figures i.e. 2 121 516 for 225 x 32.
See page 15 for further details. For Tapping Tee and Coupler use code 2121 plus last three figures i.e. 2 121 516 for 225 x 32.
Z2
Z1
63 x
125 x 63 63* 2 151 429
2 211 459 145
165 108
190 189
125 57.5
40 30
46 1 2or 3 11 11 < 4<Bar
10 Bar < 12.5
< 16 Bar
Bar 0.98
3.4
75 xx 63
160 40 22 111 433 165
211 480 145 108
219 108
125 63.5
40 30
46 23 11 11 < 4<Bar
10 Bar < 12.5
< 16 Bar
Bar 0.79
3.8
180 50* 22 151
75 xx 63 434 165
211 492 145 108
219 168
125 63.5
40 30
46 23 11 11 < 4<Bar
10 Bar < 12.5
< 16 Bar
Bar 0.91
3.8
200 63* 22 151
75 xx 63 435 165
211 505 145 108
219 189
125 63.5
40 30
46 23 11 11 < 4<Bar
10 Bar < 12.5
< 16 Bar
Bar 1.00
3.8
90 x
225 x 63*40 2 111 440
2 211 519 145
165 108
219 108
125 71
40 30
46 43 11 11 < 10
< 4 Bar Bar < 16 Bar
< 12.5 Bar 0.79
2.7
Clamp Types 90 x 50* 2 151 441 145
* Supplied without underclamp. 108 168 71 30 3 11 < 10 Bar < 16 Bar 1.00
1 – Permanent PE Underclamp 90 x 63* 2 151 442 145 108 189 71 30 3 11 < 10 Bar < 16 Bar 1.01
3 – Permanent Strap Underclamp 110 x 40 2 111 448 145 108 108 81 30 3 11 < 10 Bar < 16 Bar 0.80
See page 15 for further details. 110 x 50* 2 151 449 145 108 168 81 30 3 11 < 10 Bar < 16 Bar 1.01
Clamp Types
110 x 63* 2 151 450 145 108 189 81 30 3 11 < 10 Bar < 16 Bar 1.02
2 – Permanent PE Underclamp and Screws
4 – 10 times usable Strap Underclamp 125 x 40 2 111 457 145 108 108 89 30 3 11 < 10 Bar < 16 Bar 0.80
MEDIUM VOLUME
See page 17 for further details. 125 x 50* 2 151 458 145 108 168 89 30 3 11 < 10 Bar < 16 Bar 1.01
125 x 63* 2 151 459 145 108 189 89 30 3 11 < 10 Bar < 16 Bar 1.02
d1
140 x 40 2 111 467 145 108 108 96 30 3 11 < 10 Bar < 16 Bar 0.80
Z2
d 140 x 50* 2 111 468 145 108 168 96 30 3 11 < 10 Bar < 16 Bar 0.92
140 x 63* 2 151 469 145 108 189 96 30 3 11 < 10 Bar < 16 Bar 1.01
Z1
160 x 40 2 111 478 145 108 108 106 30 3 11 < 10 Bar < 16 Bar 0.81
d1 160 x 50* 2 151 479 145 108 168 106 30 3 11 < 10 Bar < 16 Bar 1.02
Z2
160 x 63* 2 151 480 145 108 189 106 30 3 11 < 10 Bar < 16 Bar 1.03
d 180 x 40 2 111 490 145 108 108 116 30 3 11 < 10 Bar < 16 Bar 0.82
180 x 50* 2 151 491 145 108 168 116 30 3 11 < 10 Bar < 16 Bar 1.03
Z1 A 180 x 63* 2 151 492 145 108 189 116 30 3 11 < 10 Bar < 16 Bar 1.04
200 x 40 2 111 503 145 108 108 126 30 3 11 < 10 Bar < 16 Bar 0.83
200 x 50* 2 151 504 145 108 168 126 30 3 11 < 10 Bar < 16 Bar 1.04
200 x 63* 2 151 505 145 108 189 126 30 3 11 < 10 Bar < 16 Bar 1.05
B A 225 x 40 2 111 517 145 108 108 139 30 3 11 < 10 Bar < 16 Bar 0.84
225 x 50* 2 151 518 145 108 168 139 30 3 11 < 10 Bar < 16 Bar 1.05
225 x 63* 2 151 519 145 108 189 139 30 3 11 < 10 Bar < 16 Bar 1.06
For Tapping Tees and Coupler use code 2121 plus last three figures i.e. 2 121 519 for 225 x 63.
B * Medium Volume Tapping Tee plus Reducer
16
14
Equipmentfor
Equipment forTapping
TappingTees
Tees
Product Hex
Code
Product Description (mm)
Pitch
Description
For use with tapping tees with 20, 25, 32 and 40mm outlets 10
Code001
8 202 (mm)
88201
202 002
001 ForFor
useuse with
with tapping
tapping tees
tees with20,
with 63mm outlets
25, 32 and 40mm outlets 27
10
8 201 002 For use with tapping tees with 63mm outlets 27
Electrofusion Module‘O’‘O’
ElectrofusionModule PE100
PE100Black
Black
Nominal
Nominal Bore punch Rating Rating Rating
Rating Individual
Individual
d xddx1 d1
Bore Product
Product AA Z1 Z1 Z2 Z2Punch Ø ØClamping
Clamping for for for
for Water Weight
Weight
(mm) Code (mm) (mm) (mm) (mm) system SDR Gas (kg)
(mm) Code (mm) (mm) (mm) (mm) system SDR Gas Water (kg)
63 x 25 2 611 425 130 303 51.5 26 1 or 3 11 < 10 Bar < 16 Bar 1.17
63 x 25
63 x 32
22 611 425
611 426
130
130 310
303 51.5 51.5 26 26 1 or 31 or 311 11 < 10 Bar
< 10 Bar
< 16 Bar
< 16 Bar
1.17
1.19
63 x 32 2 611 426 130 310 51.5 26 1 or 3 11 < 10 Bar < 16 Bar 1.19
90 x 25 2 611 438 140 303 65 26 3 11 < 10 Bar < 16 Bar 1.17
90 x 25 2 611 438 140 303 65 26 3 11 < 10 Bar < 16 Bar 1.17
90 x 32 2 611 439 140 310 65 26 3 11 < 10 Bar < 16 Bar 1.19
90 x 32 2 611 439 140 310 65 26 3 11 < 10 Bar < 16 Bar 1.19
110 x 25 2 611 446 140 303 75 26 3 11 < 10 Bar < 16 Bar 1.18
110 x 25 2 611 446 140 303 75 26 3 11 < 10 Bar < 16 Bar 1.18
110 x 32 2 611 447 140 310 75 26 3 11 < 10 Bar < 16 Bar 1.20
110 x 32 2 611 447 140 310 75 26 3 11 < 10 Bar < 16 Bar 1.20
125 x 25 2 611 455 140 303 82.5 26 3 11 < 10 Bar < 16 Bar 1.19
125 x 25 2 611 455 140 303 82.5 26 3 11 < 10 Bar < 16 Bar 1.19
125 x 32 2 611 456 140 310 82.5 26 3 11 < 10 Bar < 16 Bar 1.21
125 x 32 2 611 456 140 310 82.5 26 3 11 < 10 Bar < 16 Bar 1.21
160 x 25
Clamp Types 160 x 25 22 611
611 476
476 140
140 303
303 100
100 26 26 3
3 11 < 10 Bar
11 < 16 Bar
< 10 Bar < 16 Bar 1.20
1.20
Clamp Types 160 x 32
1 – Permanent PE Underclamp 160 x 32 22 611
611 477
477 140
140 310
310 100 100 26 26 3 3 11 < 10 Bar
11 < 16 Bar
< 10 Bar < 16 Bar 1.22
1.22
1 – Permanent PE Underclamp 180 xx 25
3 – Permanent Strap Underclamp 180 25 22 611
611 488
488 140
140 303303 110 110 26 26 3 3 11 < 10 Bar
11 < 16
< 10 Bar < Bar
16 Bar 1.21
1.21
3 – Permanent Strap Underclamp 180 xx 32
180 32 22 611
611 489
489 140
140 310310 110 110 26 26 3 3 11 <
11 10 Bar
< 10 Bar < Bar
< 16 16 Bar 1.23
1.23
200 xx 32
200 32 2 611 502
2 611 502 140
140 310310 120 120 26 26 3 3 11 < 10 Bar
11 < 16
< 10 Bar < Bar
16 Bar 1.24
1.24
225 xx 32
225 32 22 611
611 516
516 140
140 310310 132.5132.5 26 26 3 3 11 < 10 Bar
11 < 16
< 10 Bar < Bar
16 Bar 1.25
1.25
Z1
Z2
UnderclampTypes
Underclamp Types
11 –– Permanent
Permanent PEPEUnderclamp
Underclamp 33 –– Permanent Strap
Permanent Strap Underclamp
Underclamp
22 –– Permanent
Permanent PEPEUnderclamp
Underclampand and
Screws
Screws 4 – 10 times
times usable
usableStrap Underclamp
Strap Underclamp
17
15
18
D1
110xx6340
110 22311
311450
448 PE80
85 6446 29 3 3 11 9 << 10
10Bar
Bar < < 16
16 Bar
Bar 0.32
0.40
110xx2050
125 22311
311454
449 PE80
53 6413 36 3 3 11 9 << 10
10Bar
Bar < < 16
16 Bar
Bar 0.34
0.29
110xx2563
125 22311
311455
450 PE100 53 8518 46 3 3 11 9 << 10
10Bar
Bar < < 16
16 Bar
Bar 0.40
0.30
110xx3290
125 22311
311456
452 PE100 64 8023 60 3 2 11 11 << 10
10Bar
Bar < < 16
16 Bar
Bar 1.67
0.31
110xx40110 22311
125 311457
453 PE80
64 9029 65 3 2 11 11 <<104 Bar
Bar <<12.5 Bar
16 Bar 1.90
0.33
125 x
125 x 5020 2 311 454
2 311 458 PE80
64 5336 13 3 3 11 9 << 10
10 Bar
Bar <
< 16
16 Bar
Bar 0.29
0.35
125xx6325
125 22311
311459
455 PE80
85 5346 18 3 3 11 9 << 10
10Bar
Bar < < 16
16 Bar
Bar 0.30
0.41
125 x 32
160 x 20
2 311 456
2 311 475
PE80
53 6413 23 3 3 11 9 << 10
10Bar
Bar < < 16
16 Bar
Bar 0.31
0.29
125 x 40
160 x 25
2 311 457
2 311 476
PE80
53
6418 29 3 3 11
9 < 10 Bar <
< 10 Bar
< 16 Bar
16 Bar
0.33
0.31
125 x 50 2 311 458 PE80
64
6423 36 3 3 11
9 < 10 Bar <
< 10 Bar
< 16 Bar
16 Bar
0.35
0.32
160 x 32 2 311 477
125 x 63 2 311 459 PE100 64
8529
46 3
3 11
9 < 10 Bar
< 10 Bar
< 16 Bar
< 16 Bar
0.41
0.34
160 x 40 2 311 478
125 x 90* 2 351 461 PE80 80 46 3 11 < 4 Bar < 12.5 Bar 1.50
160 x 50 2 311 479 64 36 3 11 < 10 Bar < 16 Bar 0.36
125 x 110 2 311 462 PE80 90 65 2 11 < 4 Bar < 12.5 Bar 1.90
160 x 63 2 311 480 85 46 3 11 < 10 Bar < 16 Bar 0.42
160 x 20 2 311 475 PE80 53 13 3 9 < 10 Bar < 16 Bar 0.29
200 x 20 2 311 500 53 13 3 11 < 10 Bar < 16 Bar 0.30
160 x 25 2 311 476 PE80 53 18 3 9 < 10 Bar < 16 Bar 0.31
200 x 25 2 311 501 53 18 3 11 < 10 Bar < 16 Bar 0.31
160 x 32 2 311 477 PE80 64 23 3 9 < 10 Bar < 16 Bar 0.32
200 x 32 2 311 502 64 23 3 11 < 10 Bar < 16 Bar 0.33
160 x 40 2 311 478 PE80 64 29 3 9 < 10 Bar < 16 Bar 0.34
200 x 40 2 311 503 64 29 3 11 < 10 Bar < 16 Bar 0.35
160 x 50 2 311 479 PE80 64 36 3 9 < 10 Bar < 16 Bar 0.36
64 36 3 11 < 10 Bar 16 Bar 0.37
200 x 50
160 x 63 2 311 504
2 311 480 PE100 85 46 3 9 < 10 Bar < < 16 Bar 0.42
85
200
160xx63125 22311311505
484 PE80 8846 93 3 2 11
11 < 10 Bar
< 4 Bar <<12.5 16 Bar
Bar 0.43
2.40
For200
Branch
x 20Saddle and Coupler
2 311 500 use PE80code 2321
53 plus last
13three figures
3 i.e. 2 321
9 505<for
10200
Barx 63.< 16 Bar 0.30
Please contact us for further dimensions.
200 x 25 2 311 501 PE80 53 18 3 9 < 10 Bar < 16 Bar 0.31
200 x 32 2 311 502 PE80 64 23 3 9 < 10 Bar < 16 Bar 0.33
200 x 40 2 311 503 PE80 64 29 3 9 < 10 Bar < 16 Bar 0.35
200 x 50 2 311 504 PE80 64 36 3 9 < 10 Bar < 16 Bar 0.37
200 x 63 2 311 505 PE80 85 46 3 9 < 10 Bar < 16 Bar 0.43
200 x 125 2 311 509 PE80 88 93 2 11 < 4 Bar < 12.5 Bar 2.40
225 x 20 2 311 514 PE80 53 13 3 9 < 10 Bar < 16 Bar 0.31
225 x 25 2 311 515 PE80 53 18 3 9 < 10 Bar < 16 Bar 0.32
225 x 32 2 311 516 PE80 64 23 3 9 < 10 Bar < 16 Bar 0.34
225 x 40 2 311 517 PE80 64 29 3 9 < 10 Bar < 16 Bar 0.37
225 x 50 2 311 518 PE80 64 36 3 9 < 10 Bar < 16 Bar 0.39
225 x 63 2 311 519 PE80 85 46 3 9 < 10 Bar < 16 Bar 0.44
For Branch Saddle and Coupler use code 2321 plus last three figures i.e. 2 321 519 for 225 x 63.
* 125 x 63 Saddle plus a 63 x 90 Reducer.
19
17
L1
D1
TappingBall
Tapping BallValves
Valves PE100
PE100Black
Black
Nominal
Nominal Bore punch Rating
Rating Rating
Rating Individual
Individual
Bore D1 x D2
D(mm)
1 x D2
Product
Product AA BB Ø Ø Clamping
Clamping SDR for for Weight
Code (mm) (mm) Punch system Gasfor for
Water Weight
(kg)
(mm) Code (mm) (mm) (mm) System SDR Gas Water (kg)
63 x 40* 8 050 801 416 131 42 1 11 < 10 Bar < 16 Bar 2.51
63 xx63
63 40* 88 050 801
050 802 416
335 131
131 4242 1 1 11 11 < 10
< 10 BarBar <<1616Bar
Bar 2.51
2.30
63 x 63
90 x 63
88 050 802
050 890
335
335
131
131 42
42 3
1 11
11 < 10
< 10 Bar
Bar < 16
< 16 Bar
Bar 2.30
2.40
90 x 63
110 x 40*
88 050 890
050 804
335
416
131
131 42
42 3
3 11
11 < 10 Bar
< 10 Bar
< 16 Bar
< 16 Bar
2.40
2.60
110 x 40* 8 050 804 416 131 42 3 11 < 10 Bar < 16 Bar 2.60
110 x 63 8 050 805 335 131 42 3 11 < 10 Bar < 16 Bar 2.49
110 x 63 8 050 805 335 131 42 3 11 < 10 Bar < 16 Bar 2.49
125 x 40* 8 050 808 416 131 42 3 11 < 10 Bar < 16 Bar 2.71
125 x 40* 8 050 808 416 131 42 3 11 < 10 Bar < 16 Bar 2.71
125 x 63 8 050 809 335 131 42 3 11 < 10 Bar < 16 Bar 2.50
125 x 63 8 050 809 335 131 42 3 11 < 10 Bar < 16 Bar 2.50
160 x 40* 8 050 813 416 131 42 3 11 < 10 Bar < 16 Bar 2.72
160 x 40* 8 050 813 416 131 42 3 11 < 10 Bar < 16 Bar 2.72
160 x 63 8 050 814 335 131 42 3 11 < 10 Bar < 16 Bar 2.51
160 x 63 8 050 814 335 131 42 3 11 < 10 Bar < 16 Bar 2.51
Punching 7 403 002 - - - - - - - 10.00
Punching
Tool
Tool 7 403 002 - - - - - - - 10.00
Clamp Types
Clamp Types ** Tapping
Tapping Ball
Ball Valve
Valve plus
plus Reducer.
Reducer.
1 – Permanent PE Underclamp
1 – Permanent PE Underclamp
3 – Permanent Strap Underclamp
3 – Permanent
See page Strap Underclamp
17 for further details.
See page 15 for further details.
20
18
21
L For Tee and 3 Couplers use code 3121 plus last three figures i.e. 3 121 500 for 500mm.
For Tee and 3 Couplers use code 3121 plus last three figures i.e. 3 121 500 for 500mm.
Note: 250 and above sizes have sections of pipe butt-fused to the moulding. On these sizes L = minimum length of
Z Note: 250
pipe and above sizes have sections of pipe butt-fused to the moulding. On these sizes L = minimum length of
added.
pipe added.
TBA - To be advised.
TBA - To be advised.
SpigotCaps
Spigot Caps PE100
PE100Black
Black
Nominal
NominalBore Rating
Rating Rating
Rating Individual
Individual
BoreDD Product
Product LL ZZ for
forGas forfor Weight
Weight
(mm) Code (mm) (mm) SDR Water (kg)
(mm) Code (mm) (mm) SDR Gas Water (kg)
20 1 611 020 42 48 11 < 10 Bar < 16 Bar 0.01
25
20 1 611 020
1 611 025 45
42 48
65
1111 < 10 Bar
< 10 Bar
< <1616Bar
Bar
0.01
0.01
32
25 1 611 025
1 611 032 45
37 50
57
1111 < 10 Bar
< 10 Bar
< <1616Bar
Bar
0.02
0.02
32 1 611 032 45 57 11 < 10 Bar < 16 Bar 0.02
40 1 611 040 50 62 11 < 10 Bar < 16 Bar 0.03
40 1 611 040 50 62 11 < 10 Bar < 16 Bar 0.03
50 1 611 050 65 71 11 < 10 Bar < 16 Bar 0.08
50 1 611 050 65 71 11 < 10 Bar < 16 Bar 0.08
63 1 611 063 64 85 11 < 10 Bar < 16 Bar 0.10
63 1 611 063 64 85 11 < 10 Bar < 16 Bar 0.10
75 1 611 075 70 96 11 < 10 Bar < 16 Bar 0.21
75 1 611 075 70 96 11 < 10 Bar < 16 Bar 0.21
L 90 1 611 090 72 124 11 < 10 Bar < 16 Bar 0.30
90 1 611 090 80 109 11 < 10 Bar < 16 Bar 0.26
110 1 611 110 82 138 11 < 10 Bar < 16 Bar 0.33
110 1 611 110 87 123 11 < 10 Bar < 16 Bar 0.40
125 1 611 125 92 155
125 1 611 125 93 133 1111 < 10 Bar
< 10 Bar < <1616Bar
Bar 0.70
0.57
140 1 611 140 100 116
140 1 611 140 100 116 1111 < 10 Bar
< 10 Bar < <1616Bar
Bar 0.74
0.74
160 1 611 160 108 179
160 1 611 160 98 154 1111 < 10 Bar
< 10 Bar < <1616Bar
Bar 1.30
1.07
180
180 1 611 180180
1 611 120
105 200
168 1111 < 10
< 10 BarBar < 16
< 16 BarBar 1.82
1.80
200
200 1 611 200200
1 611 116
116 182
182 1111 < 10 BarBar
< 10 < 16
< 16 BarBar 1.87
1.87
Z 225
225 1 611 225225
1 611 160
160 200
200 1111 < 10
< 10 BarBar < <1616Bar
Bar 2.76
2.76
250
250 1 611 250250
1 611 195
195 330
330 1111 < 10
< 10 BarBar < <1616Bar
Bar 5.25
5.25
280
280 1 611 280280
1 611 112
112 117
117 1111 < 10
< 10 BarBar < <1616Bar
Bar 5.00
5.00
315
315 1 611
1 611 315315 195
195 358
358 1111 < 10
< 10 BarBar < <1616Bar
Bar 8.70
8.70
400
400 1 611
1 611 400400 290
290 310 1111 < 10 BarBar
< 10 < <1616Bar
Bar 9.33
9.33
For Cap and Coupler use code 1621 plus last three figures i.e. 1 621 315 for 315mm.
For Cap and Coupler use code 1621 plus last three figures i.e. 1 621 315 for 315mm.
22
20
Spigot45º
Spigot 45ºElbows
Elbows PE100
PE100Black
Black
NominalBore
Nominal Rating
Rating Rating
Rating Individual
Individual
Bore D Product for Weight
D
(mm) Product
Code LL
(mm) ZZ
(mm) SDR
for
forGas for
Water Weight
(kg)
(mm) Code (mm) (mm) SDR Gas Water (kg)
25 3 611 025 35 41 11 < 10 Bar < 16 Bar 0.03
25
32 33611
611032
025 35
48 4161 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.03
0.05
32
40 33611
611040
032 48
53 6164 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.05
0.08
40
50 33611
611050
040 57
65 7875 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.08
0.09
50
63 33611
611063
050 65
69 7585 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.09
0.24
63
75 33611
611075
063 69
75 8596 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.24
0.33
75
90 33611
611090
075 75
79 9695 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.33
0.50
90
110 33611
611110
090 80
87 109
107 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.50
0.90
110
125 33611
611125
110 87
94 110
116 11 11 < 10
< Bar
10 Bar < <1616
BarBar 0.75
1.20
125
140 33611
611140
125 92
98 123
190 11 11 < 10
< Bar
10 Bar < <1616
BarBar 1.09
1.60
140
160 33611
611160
140 98
103 190
135 11 11 < 10
< Bar
10 Bar < <1616
BarBar 1.60
2.30
160
180 33611
611180
160 103
120 135
157 11 11 < 10
< Bar
10 Bar < <1616
BarBar 2.30
2.60
180
200 33611
611200
180 120
122 157
172 11 11 < 10
< Bar
10 Bar < <1616
BarBar 2.60
3.70
200
225 33611
611225
200 122
130 172
185 11 11 < 10
< Bar
10 Bar < <1616
BarBar 3.70
5.10
225
250 33611
611250
225 130
130 185
246 11 11 < 10
< Bar
10 Bar < <1616
BarBar 5.10
9.70
250
280 33611
611280
250 130
140 246
246 11 11 < 10
< Bar
10 Bar < <1616
BarBar 9.70
10.60
280
315 33611
611315
280 140
150 246
293 11 11 < 10
< Bar
10 Bar < <1616
BarBar 10.60
16.50
315
400 33611
611400
315 150
200 293
380 11 11 < 10
< Bar
10 Bar < <1616
BarBar 16.50
31.97
400
500 33611
611500
400 200
TBA 380
TBA 11 11 < 10
< Bar
10 Bar < <1616
BarBar 31.97
TBA
For 45º 3 611
500Elbow and 500 use TBA
2 Couplers code 3621 plusTBA 11 i.e. 3 621< 500
last three figures 10 Bar < 16 Bar
for 500mm. TBA
Z Note:
For 45º250 and and
Elbow above sizes have
2 Couplers usesections of pipe
code 3621 plusbutt-fused
last three to the moulding.
figures i.e. 3 621On these
500 sizes L = minimum length of
for 500mm.
L pipe added.
Note: 250 and above sizes have sections of pipe butt-fused to the moulding. On these sizes L = minimum length of
TBA - To be advised.
pipe added.
TBA - To be advised.
24
22
25
23
BackingRings
Backing Rings Black
Black
Nominal
Nominal Rating
Rating Rating
Rating Individual
Bore
Bore Product
Product D1D1 D2 D2 D3 D3 K K B B No ofNo of for for for
for Weight
Weight
(mm) Code (mm) (mm) (mm) (mm) (mm) Holes Gas Water (kg)
(mm) Code (mm) (mm) (mm) (mm) (mm) Holes Gas Water (kg)
25 x 20 4 104 025 34 118 14 75 18 4 < 10 Bar < 16 Bar 0.40
25 x 20
32 x 25
4 104 025
4 104 032 42
34 118
122 14
14 85
75 17
18 4
4 < 10 Bar <<1616Bar
< 10 Bar
Bar 0.40
0.40
32 x 25 4 104 032 51
42 122
142 18
14 100
85 17
17 4
4 < 10
< 10 Bar
Bar < 16 Bar
< 16 Bar
0.40
0.50
40 x 32 4 104 040
40 x 32 4 104 040 62
51 142
156 18
18 110
100 19
17 4
4 < 10 Bar <<1616Bar
< 10 Bar
Bar 0.50
0.70
50 x 40 4 104 050
50 x 40 4 104 050 62 156 18 110 19 4 < 10 Bar < 16 Bar 0.70
63 x 50 4 104 063 78 171 18 125 20 4 < 10 Bar < 16 Bar 0.90
63 x 50 4 104 063 78 171 18 125 20 4 < 10 Bar < 16 Bar 0.90
63 x 60 4 101 063 TBA TBA TBA TBA TBA 8 < 4 Bar < 12.5 Bar TBA
63 x 60 4 101 063 TBA TBA TBA TBA TBA 8 < 4 Bar < 12.5 Bar TBA
75 x 65 4 104 075 92 191 18 145 21 4 < 10 Bar < 16 Bar 1.00
75 x 65 4 104 075 92 191 18 145 21 4 < 10 Bar < 16 Bar 1.00
90 x 80 4 104 090 108 206 18 160 21 8 < 10 Bar < 16 Bar 1.10
90 x 80 4 104 090 108 206 18 160 21 8 < 10 Bar < 16 Bar 1.10
110 x 100 4 104 110 128 226 18 180 22 8 < 10 Bar < 16 Bar 1.50
110 x 100 4 104 110 128 226 18 180 22 8 < 10 Bar < 16 Bar 1.50
125 x 100 4 104 125 135 226 18 180 23 12 < 10 Bar < 16 Bar 1.40
125 x 100 4 104 125 135 226 18 180 23 12 < 10 Bar < 16 Bar 1.40
160 x 150 4 104 160 178 296 22 240 28 8 < 10 Bar < 16 Bar 1.80
160 x 150 4 104 160 178 296 22 240 28 8 < 10 Bar < 16 Bar 1.80
188 296 22 240 27 8 < 10 Bar
180
180xx150
150 44104
104180
180 188 296 22 240 27 8 < 10 Bar <<1616Bar
Bar 1.90
1.90
200
200xx200
200 44104
104200
200 235
235 350
350 22 22 295295 32 32 8 8 < 10
< Bar
10 Bar <<1616Bar
Bar 3.10
3.10
225
225xx200
200 44104
104225
225 238
238 350
350 22 22 295295 31 31 8 8 < 4<Bar
4 Bar <<12.5
12.5Bar
Bar 3.10
3.10
D1 D2 K
225
225xx200
200 44101
101225
225 238
238 350
350 22 22 295295 31 31 8 8 < 10
< Bar
10 Bar <<1616Bar
Bar 3.10
3.10
250
250xx250
250 44104
104250
250 288
288 412
412 22 22 350350 36 36 12 12 < 4<Bar
4 Bar <<12.5
12.5Bar
Bar 4.90
4.90
250
250xx250
250 44101
101250
250 288
288 412
412 22 22 350350 36 36 12 12 < 10
< 10 Bar < 16Bar
Bar < 16 Bar 4.90
4.90
D3 315xx300
315 300 44104
104315
315 338
338 462
462 22 22 400400 42 42 12 12 < 4<Bar
4 Bar <<12.5
12.5Bar
Bar 6.40
6.40
315xx300
315 300 44101
101315
315 338
338 462
462 22 22 400400 42 42 12 12 < 10
< Bar
10 Bar <<1616Bar
Bar 6.40
6.40
355xx350
355 350 44101
101355
355 376
376 525
525 22 22 460460 52 52 16 16 < Bar
< 10 10 Bar <<1616Bar
Bar 11.10
B
400xx400
400 400 44101
101400
400 430
430 586
586 26 26 545545 56 56 16 16 < Bar
< 10 10 Bar <<1616Bar
Bar 14.70
TBA
TBA -- To
To be advised.
26
24
FullFaced
Full FacedFlange
Flange
Nominal
Nominal RatingRating Rating
Rating Individual
Individual
Bore
Bore Product
Product dd DD D1/D
D12/D2 T T Z Z H No for for
H of No ofGas forfor Weight
Weight
(mm) Code (mm) (mm) (mm) (mm) (mm) (mm) Holes Water (kg)
(mm) Code (mm) (mm) (mm) (mm) (mm) (mm) Holes Gas Water (kg)
20 3 403 025 25 105 75 47 78 20 4 < 10 Bar < 16 Bar 0.65
20
25
3 403 025 3225
3 403 032
105
115 85
75 47 47 78 7825 204 4 < 10 Bar< 16
< 10 Bar
< 16
Bar
Bar 0.65
0.80
25
40
3 403 032
3 403 040
32
40/32
115
150
85
100/110 60
47 97 7825 254 4< 10 Bar
< 10 Bar< 16
< 16
Bar
Bar 0.80
0.90
40 3 403 040 40/32 150 100/110 60 97 25 4 < 10 Bar < 16 Bar 0.90
50 3 403 050 50/40 165 110/125 67 106 30 4 < 10 Bar < 16 Bar 1.05
50 3 403 050 50/40 165 110/125 67 106 30 4 < 10 Bar < 16 Bar 1.05
65 3 403 063 63/50/60 185 125/145 75 122 30 4 < 10 Bar < 16 Bar 1.48
65 3 403 063 63/50/60 185 125/145 75 122 30 4 < 10 Bar < 16 Bar 1.48
80 3 403 075 75/60/65 200 145/160 80 130 35 8 < 10 Bar < 16 Bar 1.58
80 3 403 075 75/60/65 200 145/160 80 130 35 8 < 10 Bar < 16 Bar 1.58
80 3 403 090 90 200 160 84 140 35 8 < 10 Bar < 16 Bar 2.40
80 3 403 090 90 200 160 84 140 35 8 < 10 Bar < 16 Bar 2.40
100 3 403 110 110 220 180 87 140 35 8 < 10 Bar < 16 Bar 3.30
100 3 403 110 110 220 180 87 140 35 8 < 10 Bar < 16 Bar 3.30
100 3 403 125 125 220 180 92 165 35 8 < 10 Bar < 16 Bar 3.36
100 3 403 125 125 220 180 92 165 35 8 < 10 Bar < 16 Bar 3.36
125 3 403 140 140
125 3 403 140 140 250
250 210
210 111
111180 18049 498 < 10 Bar
8 < 10 Bar< 16 Bar
< 16 Bar 6.50
6.50
150 3 403 160
Z
150 3 403 160 160160 285
285 240
240 116 116180 18048 488 < 10 Bar
8 < 10 Bar< 16 Bar
< 16 Bar 7.10
7.10
T H 150
150 33 403 180
403 180 180
180 285
285 240240 105 105250 25048 488 <8 10 Bar
< 10 Bar< 16 BarBar
< 16 10.05
10.05
200
200 33 403
403200
200 200
200 340
340 295295 112 112280 28055 558 <8 10 Bar
< 10 Bar< 16 BarBar
< 16 12.10
12.10
200
200 33 403 225
403 225 225
225 340
340 295295 120 120315 31555 558 <8 10 Bar < 16
< 10 Bar < 16BarBar 13.50
13.50
250
250 33 403
403250
250 250
250 395
395 350350 129 129225 22564 6412 < 10 Bar
12 < 10 Bar< 16 BarBar
< 16 15.00
15.00
250
250 33 403
403280
280 280
280 395
395 350350 139 139375 37564 6412 < 10 Bar
12 < 10 Bar< 16 BarBar
< 16 19.10
19.10
300
300 33 403
403315
315 315
315 445
445 400400 150 150385 38568 6812 < 10 Bar
12 < 10 Bar< 16 BarBar
< 16 23.50
23.50
d D2 D1 D 350
350 33 403
403 355
355 355
355 515
515 460460 160 160280 28077 7712 10 Bar
12 < 10 Bar < 16
< < 16 BarBar 38.00
38.00
27
25
28
ORDER DELIVERY
No order taken by our agents or employees shall be binding upon us until 1. Our merchandise is sold ex our warehouses or those of the consignor
it has been ratified. We shall not be bound by the agreed timescales, and chosen by us. They shall always travel at the purchaser’s risk, even in
any exceeding of such timescales shall not under any circumstances give the event of a carriage-paid price.
rise to any compensation or to cancellation of the order without advance
written notice. 2. The weights and measures recorded at the time of departure of the
merchandise shall be deemed to be those of the delivered quantities.
SALE
1. Our sales are made at the price in effect on the date of delivery. The numbers and weights of packages shown on the consignment
Any price changes arising from legal or contractual modifications note shall be deemed to be those delivered to the recipient, who shall
(customs duties, taxes of any kind, freight charges, etc.) which arise be personally responsible for making any claim against the carrier
between the date of the order and the date of delivery shall be applied in respect of any missing item, damage, lateness, etc., and under no
at the time of invoicing. circumstances shall our Company be held liable in this regard.
2. All our sales are made SUBJECT TO RETENTION OF TITLE. In the event of delivery of merchandise by tanker lorry, such
Consequently: merchandise is delivered to the doorstep of the purchaser, who shall
carry out all appropriate verifications upon receipt. No claim shall be
The transfer to the purchaser of title to the delivered merchandise accepted after delivery has been made.
shall be conditional upon full payment of the price.
3. We accept no responsibility for the conditions in which the sold
Partial payment shall not entail novation and shall not be deemed to merchandise is received, stored, used or retailed by the purchaser.
derogate from the present retention of title clause.
CONDITIONS OF PAYMENT
* Risk shall transfer to the purchaser at the moment of delivery. 1. All our sales are payable in cash, without discount, in Monaco. No
other form of payment shall be valid except for supplies in respect of
In particular, the purchaser shall be responsible for taking out which such payment is stipulated in writing by ourselves.
insurance against all risks of loss, damage or liability caused or
incurred by the products concerned. 2. Any sum not paid on its due date may, upon the issuing of simple
formal notice, entail the immediate payability of all sums owed to us,
* In order to allow the identification of merchandise belonging to including those not yet due.
us, the purchaser shall respect the markings applied to packagings
and the instructions given thereon The purchaser shall also keep an 3. Any sum not paid on its due date or which becomes payable, including
inventory of such merchandise, and any such in its possession shall any charges pertaining thereto, shall rightfully incur interest as of the
be stored in clearly marked dedicated locations. due date or the date on which it becomes payable, at 5 points above
the legal rate in force.
Within the context of its normal activities, the purchaser may have
merchandise in its possession before full payment of the price with a 4. Any partial payment, in any manner whatsoever, of the amount of one
view to its processing, consumption or resale. This entitlement shall or more of our invoices shall be attributed firstly and up to the value
be rightfully withdrawn from the purchaser without prior notice in the of the portion of the debt owed to us which is not accompanied by the
event of nonpayment on the due date, irrespective of the cause. We preferential claim granted by Article 380 of the Customs Code.
therefore reserve the right to demand the return of any merchandise
for which full payment has not been made, even in the event of judicial 5. In the event of a payment incident entailing the breaking off of
settlement or liquidation. commercial relations, the amount of the merchandise recovered shall
be attributed to the amount of the invoices corresponding to the last
The purchaser shall send us, at the first time of asking, an inventory deliveries.
of the merchandise still in its possession at the date on which the
payment becomes due or at the date of commencement of the judicial ATTRIBUTION OF JURISDICTION:
settlement or liquidation procedure. The merchandise appearing on Any dispute which may arise between our Company and our clients or
this inventory shall be deemed to be that not paid for. suppliers shall be referred to the exclusive jurisdiction of the Courts
of Monaco, even in the event of third parties being called into the
The present retention of title clause shall take priority over any other proceedings or in the event of a plurality of defendants.
contrary provision.
29
email: info@innogaz.com
web: www.innogaz.com
INO 0004 - Reprint December 2012
Distributor