Beruflich Dokumente
Kultur Dokumente
COURSE INFORMATION
YEAR/SEMESTER : 2 / SEMESTER 3
PREREQUISITE : -
CORE REQUISITE :
COURSE DESCRIPTION
This course is designed as an introduction for students who wish to develop their competency relating to methods in servicing and maintaining
work place tools and equipment based on identification of materials for floor finishing by using blue print, work specification, catalogue and
brochures. The students will also be able to prepare good vertical backing surface to receive finishing and prepare good adhesives for tiling and
mosaic fixing using blue print, work specification, tools, scaffolding, brochures and tools.
This course will also focus on setting out and laying tiles on walls, on floor in a proper setting out using work specification, appropriate tools,
equipment and materials. Beside, students also will be able to identify, select and prepare materials and background surfaces by performing
water base or oil base painting according to proper method using blue print, work specification, appropriate tools, equipment and materials.
Workplace safety and cleanliness guidance are also included in this module that contributes to the state of knowledge about finishing work.
APPLIED SKILLS:
- Meticulous in
obtaining contract document
- Honesty in the privacy and
confidenciality of the contract documents
2. CARRY OUT TILING RELATED KNOWLEDGE : i. Type, size, colour, pattern of tiles determined
INSTALLATION according to approved construction drawing
i. Type, size, colour, pattern of tiles and client’s requirement
ii. Tiling preparation materials, tools and ii. Ensure waterproofing applied prior to the tiling
equipment installation
iii. Method and technique of level marking iii. Squareness and evenness of area determined
iv. Mixing cement mortar according to construction drawing
v. Method and technique of tail cutting iv. Materials, tools and equipment prepared
vi. Technique of tail Installation according to tiling installation requirement
vii. Technique of white cement application v. Marking level carried out according to
viii. Housekeeping and 3R activities construction drawing
vi. Cement mortar for jointing mixed according to
tiling requirement
APPLIED SKILLS: vii. Tile cut and arranged according to tiling
requirement
i. Determine type, size, colour, pattern of viii. Tiles installed according to installation
tiles practices
ii. Determine squareness and evenness of ix. White cement for jointing and pointing applied
area according to installation practices
iii. Prepare materials, tools and equipment x. Housekeeping and 3R (reduce, reuse and
iv. Carry out marking level recycle) activities carried out
v. Mixed Cement mortar for jointing
vi. Cut Tail according to tiling requirement ASSESSMENT CRITERIA
vii. Install Tiles according to installation
practices i. Type, size, colour, pattern of tiles listed and
viii. Apply White cement for jointing and explained
pointing ii. Materials, tools and equipment condition check
ix. Carry out housekeeping and 3R activities and arranged
Document Page 5/13
ATTITUDE/ SAFETY/ ENVIRONMENTAL : iii. Tiling area squareness, evenness and making
level quality checked according to construction
drawing
Attitude: iv. Cement mortar Mixed according to proper
proposition
- Ensure timely completion of work v. Tail prepared according to tiling preparation
- Diligent in carrying out finishes work quality and practices
alignment and sequence vi. Tiles installed according to tiling preparation
quality and practices
Safety vii. White cement used according to tiling
preparation quality and practices
- Adhere to safety requirement viii. Housekeeping and 3R activities properly done
according to safety procedure
Attitude
CORE ABILITY
1. Laser 1:5
2. String/Plumb bob 1:5
3. Spirit level 1:5
4. L-angle 1:5
5. Measuring tape 1:5
6. PPE 1:5
7. Trowel 1:1
8. Bucket 1:5
9. Wheelbarrow 1:5
10. Right angle 1:5
11. Levelling equipment 1:5
12. Hammer 1:5
13. Pliers 1:5
14. Brush 1:5
References
REFERENCES
1. Edward Allen, Joseph Iano, (2009) Fundamentals of Building Construction: Material and Method, John Wiley And Son Inc, New Hersey, ISBN 978-
0-470-07468-8
2. Francis D.K. Ching, (2010), Building Construction Illustrated Fourth Edition, John Wiley And Son Inc, New Jersey, ISBN: 378-0-470-08781-7
3. Edward Allen, Rob Thallon, Fundamentals of Residential Construction, John Wiley And Son Inc, New Jersey, ISBN 978-0-470-5-4085-4
4. Whitney C Clark Huntington (2001), Building Construction Materials and Types Of Construction, Robert E. Mickadeit
5. N. Jackson (1984), Civil Engineering Materials, English Language Book Society Macmillan (Elbs).
6. William Irvine (2005), Surveying for Construction, McGraw-Hill Education.
7. Nunally, S.W (1998), Construction Methods and Management, Prentice Hall.
8. Wang, B.T.H (1987), Construction and Development - With Reference to Malaysian Practice', Pelanduk Publication.
9. Peter Domone, John Hilston(1994), Construction Materials.