Beruflich Dokumente
Kultur Dokumente
KW0400324, KW0400325
Accessories :
• Tailstock • Carrier Article No. A B C D E F G H L M N O P
• Change gear bracket • Hole plate KW0400321 162 14 102 87 186 95 116 100 93 54.7 30 100 100
• Change gears • Flange KW0400322 209 18 116 98 224 117 120 125 103 68.5 34.5 100 125
• Jack • 3-jaws chuck
• Center • Face plate (specially ordered)
Article No. KW0400321 KW0400322
Universal Dividing Head, Center Height Universal Dividing Head, Center Height
Description
100mm 125mm
Specifications
Center Height (mm) 100 125
Swivel Angle of Spindle From It’s Horizontal Position upward (o) < 95
Horizontal Position downward (o) <5
Rotating Angle of Spindle for One Complete Revolution of Dividing Handle 9o (540 grad.,1’ each)
Min. Reading of Vernier (o) 10
Worm Gear Ratio 1 : 40
Taper of Spindle Bore MT3 MT4
Width of Locating Key (mm) 14 18
Diameter of Short Taper of Spindlenose for Mounting Flange (mm) Ø 41.275 Ø 53.975
1st Plate 24, 25, 28, 30, 34, 37, 38, 39, 41, 42, 43
Hole Number on Index Plate
2nd Plate 46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66
Module 1.5 2
Change Gear
Teeth Number 25, 30, 35, 40, 50, 55, 60, 70, 80, 90, 100
Individual Indexing Error of the Spindle
± 45
for One Complete Revolution of Dividing (o)
Cumulate Error at any Periphery of Spindle (o) ±1
Max. Bearing (kg) 100 130
Net Weight (kg) 67 110
Gross Weight (kg) 79 126
Packing Dimension (L x W x H) (mm) 616 x 465 x 265 635 x 530 x 310
Accesories included :
Accessories
included: Features :
• Six mask plates • Designed for indexing both horizontal and vertical position
• 3-jaws chuck • It is most optimum in use for milling, drilling machine
• Three 6-square Article No. A B C D E F G H I J K
spanner KW0400326 310 255 Ø210 255.25 18 214 171.5 149.25 80 150 16
wrenches KW0400327 260 220 Ø167 220 18 197.5 155.5 130 70 130 16
Features :
• Designed for indexing both horizontal and vertical position
• It is most optimum in use for milling, drilling machine
Article No. A B C D E F G H I J K L M N O
KW0400328 310 255 200 78 16 18 230 150 75 126 90 155 244 285 Ø210
KW0400329 250 220 188 78 16 18 197.5 130 66 112 80 150 220 235 Ø167
Article No. A B C D E F H L M d h
Accessories included: KW0400333 310 252 235 250 14 199 140 205 MT3 40 6
• T-slot bolt (2sets) KW0400334 380 322 252 320 16 241 175 255 MT4 40 10
Features :
• Dividing Plate set include index plate,
crank handle, 3 pcs screw, sector, and
U washer.
KW0400022 KW0400023
3 JAW CHUCK
Dimension:
Features:
• These chucks are tool rooms and for production work
• The chuck are mounted to spindle nose through
intermediate flange
• Available with two set of hard solid jaws
(inside and outside) or three pieces
reversiable hard jaw
ANVIl
Features:
• Cast Iron build
• 4 base lugs for permanent fixing
Features:
• Designed for professional
• Cast iron body with reinforced
stressed point
• 120° swivel base
• Bench Mount
Specification
Article No. Description Width of Jaws Weight Dimension
(mm) (kg) (mm)
KW0400035 Bench Vise 4” with Swivel Base 100 11.25 710 x 350 x 190
KW0400036 Bench Vise 5” with Swivel Base 125 20 450 x 200 x 250
KW0400037 Bench Vise 6” with Swivel Base 150 30 520 x 220 x 270
KW0400038 Bench Vise 8” with Swivel Base 200 47 600 x 250 x 300
D - Large Anvil
Precision casting
body powder
coating finish
High Quality steel
Polished plate for beam
A - Width Jaw
Features:
• Precission casting body and E - Clamp round 360o Swivel base
powder coating finihsed. object use
• 360° swivel base.
Specification
Article No. Description
A (mm/inch) B (mm) C (mm) D (mm) E (mm) Weight (kg) Dimension (mm)
KW0400362 American Bench Vise 4” with 360o Swivel Base 100/4” 127 87.5 72 x 70 Ø 10 - 76 12.2 360 x 310 x 220
KW0400363 American Bench Vise 5” with 360o Swivel Base 125/5” 140 95 78 x 78 Ø 10 - 78 16.2 430 x 190 x 230
KW0400364 American Bench Vise 6” with 360o Swivel Base 150/6” 178 107 90 x 100 Ø 10 - 91 25.2 460 x 230 x 280
ANGLE CLAMP
Features:
• Can be used on many kinds of
metal working such as welding,
riveting, moulding, etc.
• It can be used on clamping of
workpieces whose function is just
a vise
Specification
Article No. Description Jaw Height Max Opening Jaw Length Weight
(mm) (mm) (mm) (kg)
KW0400270 Angle Clamp 35 x 60mm 35 60 60 5
KW0400271 Angle Clamp 60 x 100mm 60 100 90 12
Features:
• Tilting drilling machine vice can be tilted to any position from 0º ~ 90º and lock.
• It is one of main attachments for drilling machine, it can be used for machining inclinable surface.
450 Tilt
Features:
Base rotates 3600 • The vise can be vertically tilted to any position from
KW0400274 KW0400275 0º ~ 45º and lock, and can be rotated 360º with a
swivel base
Jaw Width Jaw Depth Jaw Opening Height Weight
Article No. Description
(inch) (inch) (inch) (inch) (kg)
KW0400274 Machine Vise 6” with Swivel Base, 9” Opening 6 1 3/4 9 6 1/4 40
KW0400275 Machine Vise 6” with Swivel Base, 6” Opening 6 2 6 7 1/4 50
KW0400272 Machine Vise 4”, Swivel Base 45° Tilt 4 1-1/2 4 - 20
KW0400273 Machine Vise 6”, Swivel Base 45° Tilt 6 2 6 - 20
FREE VISE
HEAVY DUTY
Features:
• Free style clamping position
• Heavy duty application
Specification
Article No. Description Dimension Weight
Jaw Stroke (mm)
(L x W x H) (mm) (kg)
KW0400061 Free Vise Heavy Duty 8 140 x 60 x 65 8
KW0400062 Free Vise Heavy Duty 10 190 x 86 x 86 16
Specification
Article No. Description
Table Slot Stud Size Weight (kg)
KW0400284 Steel Clamping Kit M16 x 2.0P (52pcs) 18 M16-20.P 12.6
KW0400370 Steel Clamping Kit M14 x 2.0P (52pcs) 16 M14 - 2.0P 11.1
KW0400371 Steel Clamping Kit 1/2 - 12W (52pcs) 5/8 1/2 - 12W 10.4
KW0400383 Steel Clamping Kit M12 x 1.75P(52pcs) 14 M12 - 1.75P 9.4
Note : other sizes available by request
Features:
• Product of Grade M is used in high precision
machine-tool, such as machining center and digital
control machine-tool
Specification
Article No. Description Taper d D L I Weight
Hole No. Taper (mm) (mm) (mm) (mm) (kg)
Drill Chuck Keyless Precision
KW0400212 JT6 2o 58’ 24.8’ 17.170 49 100 92 0.96
1 ~ 13mm (1/32” ~ 1/2” ) JT6
Drill Chuck Keyless Precision
KW0400213 JT33 3o 38’ 13.4’ 15.850 57 115 101 1.36
3 ~ 16mm (1/8” ~ 5/8” ) JT33
Keyless Drill Chuck
KW0400951 JT3 - 55 110 97 1.3
3-16mm Jt3
Features:
• Product of Grade P is used in lathe, milling machine,
boring lathe, and drill bench etc;
Specification
Article No. Description Taper d D L I Weight
Taper
Hole No. (mm) (mm) (mm) (mm) (kg)
Drill Chuck Keyless Standard
KW0400214 JT6 2o 58’ 24.8’ 17.170 49 100 92 0.96
1 ~ 13mm (1/32” ~ 1/2” ) JT6
DRILL CHUCK
Features:
• The ideal good quality chuck for professional and D.I.Y. Users
• It can be protected from rusting for Cr-coated of the body and good appearance with
sleeve electrophoretic enamelling;
• By using anti-thrust bearing to increase the gripping
Specification
Article No. Description Capacity Thread D L1 L Weight
(mm) (inch) mount (mm) (mm) (mm) (kg)
Drill Chuck 1.5 ~
KW0400175 1.5 ~ 13 1/16 ~ 1/2 1/2 ~ 20UNF 42 59 71.5 0.285
13mm 1/2-20UNF
Features:
• Suitable for use on heavy duty and extra heavy duty
• For milling machine, lathe, drill machine and wood working machine
Specification
Article No. Description Capacity Thread D L Weight
mm inch mount (mm) (mm) (kg)
KW0400209 Drill Chuck 1 ~ 13mm JT6 1.0 ~ 13 1/32 ~ 1/2 JT6 53.0 86.0 0.625
KW0400210 Drill Chuck 1 ~ 16mm JT3 1.0 ~ 16 1/32 ~ 5/8 JT3 57.0 95 0.818
KW0400211 Drill Chuck 5 ~ 20mm JT3 5.0 ~ 20 3/16 ~ 3/4 JT3 65.0 108 1.40
• Please notify taper size when ordering
Features:
• Super precision and durable.
• The nut and jaws adopt AISI-52100 (bearing steel) and heat-treated, durability the precision can be lasted.
Suitable for CNC heavy bench.
• The tapper is precision ground, advance the precision
• By using anti-thrust bearing to increase the gripping power, so that high speed drilling can be performed.
Capacity Thread D L Weight
Type Description
mm inch mount (mm) (mm) (kg)
Drill Chuck w/Ball Bearing
KW0400207 1 ~ 19 1/32 ~ 3/4 JT4 69 121 2.15
1 ~ 19mm JT4
Features:
• Can be use in CNC Milling Machine with JIS Spindle
Specification
Article No. Description
ØD L Dimension (mm) Weight (kg)
KW0400497 BT30 Drill Chuck 1-8mm 37 80 37 x 37 x 80 0.8
KW0400280 BT40 Drill Chuck 1- 8mm 37 85 37 x 37 x 85 1.3
KW0400395 BT50 Drill Chuck 1-16mm 58 120 58 x 58 x 120 4.5
Features:
• Automatic feed and cushion drive
• Smoothness and accurate tapping application.
Article No. Description
KW0400253 Reversible Tapping Chuck M5 ~ M12
KW0400254 Reversible Tapping Chuck M8 ~ M20
Features:
• Simple and rigid construction
• Perfectly balanced for highspeed operation
• Routing and smoother operation
Specification
Article No. Description Drawbar Threads
Inch Metric
KW0400085 MT3 Boring Head Set Ø10-240mm 3401-101 n/a M12 x 1.75P
KW0400618 MT5 Boring Head Set Ø10-240mm 3401-102 n/a M16 x 3.0P
KW0400089 NT30 Boring Head Set Ø10-240mm 3401-105 1/2 ~ 12 or 1/2 ~ 13W M12 x 1.75P
KW0400090 NT40 Boring Head Set Ø10-240mm 3401-106 5/8 ~ 11W M16 x 2.0P
KW0400091 NT50 Boring Head Set Ø10-240mm 3401-107 1 ~ 8W M24 x 3.0P
Features:
• Designed for heavy
cutting and milling
process generally
Specification
Article No. Description
Size ØD ØD1 L L1 H1 H2 G Weight (kg)
KW0400234 BT40 Sidelock Endmill Holder D20 x 90mm BT40-SLA20-90 20 52 90 70 23 19 M12 x 1.5 1.8
KW0400235 BT40 Sidelock Endmill Holder D25 x 90mm BT40-SLA25-90 25 62 90 80 24 25 M18 x 1.5 2.1
KW0400236 BT40 Sidelock Endmill Holder D32 x 90mm BT40-SLA32-90 32 63 90 80 24 28 M20 x 1.5 2
KW0400398 BT50 Sidelock Endmill Holder D32 x 105mm BT50-SLA32-105 32 72 105 80 24 28 M20x1.5 5.3
KW0400610 BT30 Sidelock Endmill Holder D20 x 75mm BT30-SLA20-75 20 52 75 70 23 19 M12x1.5 1.2
KW0400611 BT50 Sidelock Endmill Holder D40 x 120mm BT50-SLA40-120 40 90 120 90 30 32 M20x1.5 6.5
Features:
• Perfectly Clamp face mill cutter
Specification
Article No. Description "Taper D1 L1 H C1 W C4 Weight
Shank" (mm) (mm) (mm) (mm) (mm) (mm) (kg)
KW0400263 Face Mill Arbor NT40 D25.4mm 3212-004 NT40 25.4 20 20 65 9.57 33 1.2
KW0400381 Face Mill Arbor NT30 D25.4mm 3212-001 NT30 25.4 20 20 65 9.57 33 0.7
KW0400423 Face Mill Arbor MT3 D25.4mm 3212-016 MT3 25.4 20 20 40 9.57 33 0.7
KW0400536 Face Mill Arbor BT40 D25.4mm 3212-203 BT40 25.4 45 22 60 9.5 33 1.7
KW0400225 Face Mill Arbor BT40 D32mm 3212-273 BT40 32 45 22 62 14 50 1.8
KW0400226 Face Mill Arbor BT40 D31.75mm 3212-206 BT40 31.75 45 30 60 12.7 40 1.8
Specification
Article No. Description Collet Set Weight
Shank Type Pieces (kg)
Chuck
KW0400825 Multi-Lock Milling Chuck NT40 MC32 3202-002 NT40 MC32 3.1
Only
Chuck
KW0400826 Multi-Lock Milling Chuck NT50 MC32 3202-004 NT50 MC32 5.1
Only
Chuck
KW0400508 Multi-Lock Milling Chuck BT40 MC32 3202-005 BT40 MC32 3.2
Only
KW0400607 Multi-Lock Milling Chuck Set BT30 MC20 4-16mm 3202-112 BT30 MC20 6 6
KW0400606 Multi-Lock Milling Chuck Set BT40 MC20 6-25mm 3202-105 BT40 MC32 7 7
Features:
• Including shank, full set of collets, wrench and case.
Specification
Article No. Description ColletSet Set Weight
Shank Type Range Pieces (kg)
OZ32 Chuck Chuck
KW0400360 Milling Chuck BT40 OZ32 3102-003 BT40 2.3
Only Only
KW0400220 Milling Chuck Set BT40 OZ32 D3-25 3102-110 BT40 OZ32 6 – 32 15 9.4
Features:
• Tension and compensation feature allows
taps to follow their own thread lead
• With extreme light compensation
comperession and tension operated by
ball cage
Specification
Article No. Description Length Compensation Weight
Thread Size L ØD₂ ØD₁ Collets
Compression Tension (kg)
BT40 Quick Change Tapping Chuck
KW0400227 M3-M12 62 36 19 7.5 7.5 TC-312 1.3
M3-M12
BT40 Quick Change Tapping Chuck
KW0400228 M8-M20 93.4 53 31 12.5 12.5 TC-820 1.8
M8-M20
BT40 Quick Change Tapping Chuck
KW0400229 M15-M33 164 78 48 20 20 TC-1433 4
M14-M33
PULL STUD
Features:
• Height quality pull stud for connection
between tool holder and taper spindle
Specification
Article No. Description
Taper No. a˚ L L1 L2 D d1 d2 d3 M
KW0400612 BT30X45DEG Pull Stud BT30 x 45˚ 45 43 23 18 16.5 11 7 12.5 M12
KW0400197 BT40X45DEG Pull Stud BT40 x 45˚ 45 60 35 28 23 15 10 17 M16
KW0400613 BT50X45DEG Pull Stud BT50 x 45˚ 90 85 45 35 38 23 17 25 M24
Features:
Beeper • The red lamp with setting red glue, it can concentrate light and resist water
• It will give up beep sound at the same time when the red lamp light up
• When work lamp light up to be incluence visual sense, it can be probe by the beep sounder
• It can be sound due in the reverse side and can`t be seen of the side
• When probe touch the deep hole while you can`t see the red light, but you can hear the sound by sounder
• Accuracy : within 0.005mm
Specification
Type Description Battery Weight
D d1 d2 L l1 l2
Type (kg)
Touch Point Sensor with UM-5#(SP) 0.30
KW0400401 Ø20 18 10 160 79 41
beeper 20mm x 2pcs
KW0400094
Specification
Article No. Description
Material Hardness Weight (kg)
KW0400094 Touch Point Sensor Alloy Steel 3402-100 Alloy Steel 56 HRC 0.06
KW0400095 Touch Point Sensor Alloy Steel 3402-101 Alloy Steel 56 HRC 0.06
KW0400319 Touch Point Sensor Stainless 3402-103 Stainless Steel 60 HRC 0.06
KW0400775 Touch Point Sensor Ceramic D10MM3402-104 Ceramic 60 HRC 0.06
Z-ZERO SETTER
Features:
• Made of high grade steel
• Equipped with precision dial indicator
• Standard and magnetic type setter
KW0400619
Features:
• Made of alloy steel under heat treatment
• Applicable for middle and high speed lathe with light load
Article No. Description Taper Size A (mm) B (mm) d (mm) D (mm) Accuracy Max. (Rpm) Weight Packing Size (mm)
KW0400626 LIGHT DUTY LIVE CENTER MT3 5001-003 MT3 32 46 26 45 0.005 2000 0.9 170 x 50 x 52
KW0400627 LIGHT DUTY LIVE CENTER MT4 5001-004 MT4 34 46 30 48 0.005 1800 1.3 195 x 58 x 56
KW0400628 LIGHT DUTY LIVE CENTER MT5 5001-005 MT5 50 62 45 68 0.005 1500 3.2 268 x 56 x 77
KW0400844 HIGH SPEED NC LIVE CENTER MT4A 5001-021 MT4 42 62 32 63 0.005 3000 2.2 253 x 92 x 80
KW0400776 HIGH SPEED NC LIVE CENTER MT5A 5001-022 MT5 57 71 40 83 0.005 2500 4.5 303 x 108 x 101
KW0400629 INTER-CHANGE LIVE CENTER MT3 5001-041 MT3 23 44 30 41 0.008 3000 1.4 255 x 138 x 100
KW0400630 INTER-CHANGE LIVE CENTER MT4 5001-042 MT4 23 51 32 47 0.008 2500 2 255 x 138 x 100
KW0400516 INTER-CHANGE LIVE CENTER MT5 5001-062 MT5 37 70 40 87 0.005 3000 5.5 275 x 147 x 97
KW0400162
HRC 48-53
KW0400182
W x H x L x pcs (mm) W x H x L x pcs (mm)
8 x 16 x 150 x 2 8 x 34 x 150 x 2 W x H x L x pcs (mm) W x H x L x pcs (mm)
Features:
8 x 18 x 150 x 2 8 x 36x 150 x 2 10 x 14 x 150 x 2 10 x 28 x 150 x 2 • Made of high grade alloy steel hardened and ground
8 x 20 x 150 x 2 8 x 38 x 150 x 2 10 x 16 x 150 x 2 10 x 30 x 150 x 2 • Accuracy : 0.01mm
8 x 22 x 150 x 2 8 x 40x 150 x 2 10 x 18 x 150 x 2 10 x 32 x 150 x 2
8 x 24 x 150 x 2 8 x 42 x 150 x 2 Article No. Description
10 x 20 x 150 x 2 10 x 35 x 150 x 2 Precision Parallels 16 - 50mm width
8 x 26 x 150 x 2 8 x 44 x 150 x 2 KW0400162
8 x 28 x 150 x 2 8 x46 x 150 x 2 10 x 22 x 150 x 2 10 x 40 x 150 x 2 8mm (36pcs)
8 x 30 x 150 x 2 8 x 48 x 150 x 2 10 x 24 x 150 x 2 10 x 45 x 150 x 2 Ground Parallels 14 ~ 50mm width
KW0400182
8 x 32 x 150 x 2 8 x 50x 150 x 2 10 x 26 x 150 x 2 10 x 50 x 150 x 2 10mm (28pcs)
V-BLOCK
Features:
• Made of cast iron with precision ground
• For round and square workpiece
Features:
• Made of hardened alloy steel and grounded
• Precission set for toolmakers and machinist
• Clamps are include in the set
L W H Packing Weight
Article No. Description
mm inch mm inch mm inch (mm) (kg)
V-Block with Clamp 2007-020 5 3 3
KW0400117 42 1 /8 70 2 /4 45 1 /4 75 x 80 x 100 1.9
70 x 45 x 42mm (2pcs/set)
MAGNETIC V-BLOCK
Features:
• Made of hardened alloy steel
• Precision ground finishing surface
Length Width Height V-Width Weight
Article No. Description
(mm) (mm) (mm) (mm) (kg)
KW0400846 Magnetic V-Block 125mm 2015-511 125 60 73 38 3.3
Features:
• The v-block and parralels transfer the
magnetism from permanent magnetic chuck
• Made of high magnetic transfer steel
Features:
• Material : SUS440 stainless steel
• Squareness within 0.005 m/m
Features:
• Material : SK2 HRC : 50-54
• Squareness : +- 0.01 MM
• Angular measure 0 - 60 deg
Length Width Height Weight
Article No. Description
(mm) (mm) (mm) (kg)
KW0400553 Adjust Angle Plate 102 x 45 x 48mm 102 45 48 1.4
KW0400554 Adjust Angle Plate 102 x 30 x 49mm 102 30 49 0.9
Standard Accessories
1 Internal spindle ...1
2 Pulley for internal grinding ...2
3 Flat belt ...1
4 Diamond tool ...1
5 Holder for diamond tool ...1
Types of Grinding for Work Pieces 6 Key folds (8, 5, 3, 2mm) ...4
Features:
• Both the main shafts have been specially designed, and the worldwide precision bearing is used to fit the main
shafts which are made of alloy steel heat-treated for high wear resistance, precision, as well as maintaning to
the lowest temperature for durability and stability.
• The motor base and the spindle bushing are adjustable.
• The motor is well designed with a special and nice apperance, The R.P.M. Of this motor varied depending on the
size of the workpiece.
• This grinder is capable of grinding the work piece to minimum of 3mm in outer diameter and from 2mm up
in inner diameter (bore) with the accuracy within 0.003mm and a well finished surface. (supplied with special
attachments)
• The spindle bushing is made of cast iron, and supported by three surfaces, Therefore, it is durable and elastic.
• Materials such as steel, iron, sopper (brass), aluminum, sact iron, plastics, procelain, marble, regardless, of being
heat treated or not, can be ground on this machine which functions lie a cylindrical grinder. So it may lower the
cost of the production.
Features:
• 1 Phase multipurpose coolant pump kit with plastic tank
• Simple and quick install to the machine
• Volume of tank 9ℓ
Symbol or
Unit SI unit Conversion Factor Physical Quantity Comment
Abbreviation
Ampere-hour Ah 3,6 x 103C (Exact) Quantity of electricty Used for storage batteries
Angstrom A 10-1om (Exact) Length Wavelength, atomic distance
Bar bar 105Pa (Exact) Pressure Fluids
Barrel (US) bbl 0.158,987,3m3 Volume 1 barrel (US) = 42 gallons (US)
Calorie I.T cal 4.186.8J (Exact) Energy Quantity of heat
Candela cd Basic SI unit Luminous intensity
Chavel vapeur (horsepower) ch 735.498,75W (Exact) Power 1ch = 75kgm/s (exact)
Degree o
1.745,329 x 10-2 rad (2/360rad) Angle
The origin of the Celcius scale is set by
Degree Celsius o
C Tk = 0OC+273.15 (Exact) Temperature
convention at 273.15K
Degree Fahrenheit o
F Tk = 5/9 (0oF+459.67) (Exact) Temperature 0oC = 5/9 (0oF-32) (exact)
Electronvolt eV 1.602,177,33 x 10-19J Energy Atomic and nuclear Physics
Farad F Derived SI unit 1F = 1C/V Electric capacitance
Faraday 9.648,70 x 10-4C Quantity of electricity Based on carbon 12
Fluid Ounce (UK) fl oz (UK) 2.841.30 x 10-5m3 Volume
Fluid Ounce (US) fl oz (US) 2.957,35 x 10-5m3 Volume Liquids
Foot ft 30,48cm (Exact) Length The symbol ‘ is also used
Gallon (UK) gal (UK) 4.546,09 x 10-3m3 Volume
Gallon (US) gal (US) 3.785,41 x 10-3m3 Volume Liquids
Hertz Hz Derived SI unit 1Hz = 1s-1 Frequency
The US value of horse power varies
Horsepower (UK) hp 745.700W Power
according to the field
Inch in 2.54cm (Exact) Length The symbol ‘ is also used
Joule J Derived SI unit Energy Work, quantity of heat
A
Kelvin K Basic SI unit Temperature Thermodynamics B
Kilogram-meter kgm 9.806,65J (Exact) Work B
S R
Kilogram-force kgf 9.806,65N (Exact) Force
Y E
M Kilowatt-hour kWh 3.6 x 10-6J (Exact) Energy Electrical energy consumption V
B I
Liquid pint (US) liq pt (US) 4.731,76 x 10-4m3 Volume Liquids
O A
L Liquid quart (US) liq pt 4.463,529 x 10-4m3 Volume Liquids T
S Litre I, L 10-3m3 (Exact) Volume C.G.P.M. 1964 I
O
Lux lx Derived SI unit 1xl = 1lm/m2 Illumination N
Micron µ 10-6m (Exact) Length Replaced by micrometer S
Mile mile 1.609,344 x 103m (Exact) Length Also called “statute mile”
International nautical mile 1.852 x 103m (Exact) Length Sea and air navigation
Milimetre of mercury
mmHg 133.322,4Pa Pressure Equal to 13.595,1 mmH20 (exact)
(conventional)
Since1970, the UK nautical mile is
Nautical mile (UK) 1.852 x 103m (Exact) Length
equal to the international nautical mile
Newton N Derived SI unit 1N = 1kg.m.s-2 Force
Ohm Ω Derived SI unit 1Ω = 1V/A Electrical Resistance
Ounce oz 28.349,5gr Mass 16oz + 1lb
Pascal Pa Derived SI unit 1Pa = 1N/m2 Pressure, stress
Pound lb 0.453,592,37kg (Exact) Mass
Pound-force lbf 4.448,22N Force
Abbreviation of “poundforce per square
Psi psi 6.894,757 x 103Pa Pressure
inch”.
The symbol rd has also been used in
Radian rad Drived SI unit 1m/m Angle (plane)
France
Second s Basic SI unit Time
Torr torr 133.322,4Pa Pressure 1/760 normal atmosPhere (exact)
Volt V Derived SI unit 1V = 1W/A Electrical Potential
Voltampere VA 1W (Exact) Apparent Electricity
Watt W Derived SI unit 1W = 1J/s Power
Watthour Wh 3600J (Exact) Energy Electrical energy consumption
Weber Wb Derived SI unit 1Wb = 1V.s Magnetic Induction
Yard yd 0.914,4m (Exact) Length