Beruflich Dokumente
Kultur Dokumente
-->
Ads by Google
Electric Calibration
Get Tips on The Importance of Effective Electrical Calibration. Download the eBook Today. us.flukecal.com
INTERVIEW-QUESTIONS
SUBSCRIBE & FOL
Interview Questions
our network & spicy inside sto
Comp
Ad Fluke Calibration 3g an
engin
engineerh
Get Quote
Is Jes
God?
1. What you knows about International Standards like IEEE ,IEC, NEMA ,NFPA Engin
and API? Hamm
Answer: engineerh
Motors Solo Run & Installation check and CP System Installation etc. Introd
Renew
Passp
4. What will you check during Lighting Final Installation and which drawing engineerh
Drawing and Lighting & Small Power layout drawing, also we have to check the Lates
existing inspection reports related to this activity like Cable Laying Inspection Thund
Pakis
report, Cable IR/Continuity test report, Glanding & Termination inspection engineerh
report. Why T
Ratin
Why n
5. By how many ways we can get the Cathodic Protection ?
engineerh
Answer: How T
Cathodic Protection (CP) may be achieved in either of two ways. By the use of With S
of En
an impressed current from an electrical source, or by the use of sacrificial
engineerh
anodes.
6. What are the main points, which we have to check during Motor Installation DO YOU LIKE THI
inspection?
Answer:
The important points that we have to check during Motor Installation are as
follows;
1. Check Rated Voltage, Current, Speed, Frequency, IP Rating and Temp.
http://www.engineerhammad.com/2016/02/quality-assurance-interview-questions.html 2/6
4/27/2018 Quality Assurance Interview Questions | Qc Interview Questions
g , ,
, p q y, g p
Yes
class. No
2. Anti-condensation heaters installed continuity and IR test done. Check I don't know
3. Verify Current Transformer (CT) installation, connection etc are correct. Votes so far: 232
Days left to vote: 69
(wherever applicable).
4. Check stator winding connection and ensure that complies with
nameplate/ data sheet.
5. Check auxiliary terminal boxes (space heater, bearing/winding
temperature/vibration etc).
Instrumentation Questions:
1. What you knows about explosion proof areas/zones ?
Answer:
Zone 0, 1 & 2 for Gases and vapours. Zone 20, 21 & 22 for Dust protection.
6. During material inspection of a Level Transmitter (LT), what will you check
and with reference to which documents?
Answer:
Material inspection shall be done as per approved ITP, data sheet and MR/MAR.
http://www.engineerhammad.com/2016/02/quality-assurance-interview-questions.html 3/6
4/27/2018 Quality Assurance Interview Questions | Qc Interview Questions
p p pp , /
Also following necessary documents shall be checked;
1. Instrument Calibration Report.
2. Product Catalogue/Installation Manual.
3. GA Drawings iv. Vendor Data sheet.
4. Inspection Reports (during manufacturing)
7. Did you worked on F&G (Fire and GAS) system, if yes please specify which
type of F&G instruments you have worked on?
Answer:
Gas detectors (Flammable Gas Detector, Toxic Gas Detectors, Hydrogen Gas
Detector), Flame detectors, Heat detectors, Smoke detectors, Beacons/Horns,
Manual call points.
10. Why we use Analog and Digital I/O cards in DCS Control Module? Which
inputs are Analog and which are Digital?
Answer:
Analog I/O cards shall be used for Analog inputs like, RTD, Thermocouple etc.
And Digital I/O cards are used for Digital inputs like Pressure switches etc.
12. How we check the cable Insulation Resistance (IR) of multi triad cable.
Answer:
We have to test the cable as following;
1. Triad to Triad.
2. Triad to Screen.
3. Triad to Armour.
4. Core to Core.
5. Core to Screen.
6. Core to Armour
-51% -34%
3 COMMENTS:
Anonymous 24 February 2016 at 06:12
Very helpful thanks for sharing
Reply
Avoid surprises — interviews need preparation. Some questions come up time and time again — usually
about you, your experience and the job itself. We've gathered together the most common questions so
you can get your preparation off to a ying start.
You also nd all interview questions at link at the end of this post.
Best rgs
http://www.engineerhammad.com/2016/02/quality-assurance-interview-questions.html 5/6
4/27/2018 Quality Assurance Interview Questions | Qc Interview Questions
Reply
Nice topic, to more details and comprehensive note for QA/QC, Please check below link
https://tworld786.blogspot.com/search/label/QA%2FQC?&max-results=10
Reply
Publish Preview
Copyrights @ All Rights are Reserved by Rana Hammad +966 58 2828 396 me@ranahammad.com
http://www.engineerhammad.com/2016/02/quality-assurance-interview-questions.html 6/6