Beruflich Dokumente
Kultur Dokumente
This catalogue outlines a range of goods and services available from Doughty®
Engineering USA, Inc.
Quality and safety are always key issues at Doughty®. To ensure our products are
safe they are all subject to the most rigorous testing possible. Testing that
incorporates where necessary, approval by the TÜV product services. Products
that have been tested will show the TÜV Logo.
www.doughty-usa.com 1
Aluminium Clamps
Aluminium Clamps
Speciality Couplers 45 - 46
Aluminium Clamps
at a Glance
∅2" ∅2" ∅2" ∅2"
Slimline Doughty Clamp Lightweight Clamps Slimline Lightweight Clamps Super Lightweight Clamps
Pages 14 - 16 Pages 17 - 19 Page 20 - 21 Page 22 - 23
Quick Trigger Clamps® Slimline QTrigger Clamps® Titan QTrigger Clamps® Speciality Couplers
Pages 36 - 38 Pages 39 - 41 Pages 42 - 44 Pages 45- 46
www.doughty-usa.com 3
®
TWENTY CLAMP
Clamps®
Twenty Clamp
Main features:
• SWL 44 lbs
• TÜV approval
• Captive M10 or M12 bolt
• Fits 2" diameter tubes
• Two turns to secure clamp
• Pressure die cast aluminium
• Prevents damage to thin wall truss
2”
4 Doughty Engineering USA inc - Tel (615) 470-5255
Aluminium
Twenty
Twenty Clamp®
Clamp
Clamps
®
T58400
Twenty Clamp®
SWL 44 lbs (20 Kg) D5 2.99" (76mm)
D1 2.48" (63mm) D6 Ø2" (Ø48 - 51mm)
D2 3.94" (100mm) W 1.10" (28mm)
D3 0.50" (Ø12.5mm) lbs 0.62 lbs (0.28 Kg)
D4 0.67" & 0.75" F M10x30
W D5
D6
D2
SWL
D1
lbs
D3
D4
www.doughty-usa.com 5
®
DOUGHTY CLAMPS
Doughty® Clamps
Main features:
2”
6 Doughty Engineering USA inc - Tel (615) 470-5255
Aluminium
Doughty ® Clamps
Clamps
S0123 - Silver
T57000 - Silver T57200 - Silver S0124 - Black
T57120 - Silver
T57010 - Black T57201 - Black T57121- Black
SWL
D3
D2 lbs
D1
D6
F
D4
W
D5
www.doughty-usa.com 7
Doughty® Clamps
360o
Aluminium
360o
Maximum
Torque Tube Diameters
30 N-m 2.00" (48-51mm)
22 lb-ft
SWL
D1 D3
lbs
D2 W
T57215 - Silver
110o
D1
2.63"
D1
4.37"
3.77"
D1
3.19"
3.19"
D2
SWL
4.5"
D2 D2
EURO SPEC DIN SPEC
55°
lbs
D2
www.doughty-usa.com 9
Doughty® Clamps
Aluminium
T57205 - Silver
T57206 - Black
2.17"
D5
4.33"
D1
D3
↓
D6
D2
Vertical
SWL Loads
D4
lbs Only
T58605 - Silver
T57230 T58601 T58606 - Black
LP = Low Profile
SWL
D5 lbs
D1
D4
F
D3
D2 W
www.doughty-usa.com 11
STAINLESS FIXINGS
Doughty® Clamps
Main features:
2”
Clamps® Clamps
360o
D3 D7 D8
D2
D1
D6
D4
W
D5
www.doughty-usa.com 13
SLIMLINE
Doughty® Clamps
®
DOUGHTY CLAMPS
SlimlineAluminium
Main features:
2”
T58014 - Silver
T57011 T58011 T58015 - Black
SWL
D3
D2
D7 lbs
D1
D6
F
D4 Vertical
↓
W Loads D8
D5
Only
www.doughty-usa.com 15
Doughty® Clamps
SlimlineAluminium
360o
D3
D5
D1 D2
D6
D4
SWL D7
lbs
Aluminium Clamps
Lightweight
Lightweight Doughty® Clamps are constructed from high
tensile aluminium extrusion and have been developed for
Clamps
installations where load capacities of up to 1100 lbs are
required. Designed to fit tubes with diameters of 2", these
clamps are slotted to hold captive an M12 hexagon nut or bolt
head. The lightweight half coupler has been TÜV tested and
certified with a SWL and TÜV approval of 1100 lbs.
Slimline versions of this range are also available.
Main features:
2”
www.doughty-usa.com 17
Aluminium Clamps
Lightweight
LW Big Ben
SWL 440 lbs (200 Kg)
H1 5.95" (151mm)
H2 ∅1.10 (∅28mm)
lbs 1.40 lbs (0.63 Kg)
T58101 T58106
D3 H3
H1
D2
D4
↓
D1 D5 H4
D6 F Vertical
D7 W Loads
H2 Only
Maximum
Torque
Tube Diameters
2.00"
LW =
30 N-m
22 lb-ft
(48 - 51mm) Lightweight
D3
SWL
lbs
D1
W
D2
www.doughty-usa.com 19
SLIMLINE
Aluminium Clamps
LIGHTWEIGHT CLAMPS
Slimline Lightweight
Main features:
2”
Lightweight
Clamps Clamps
T58098 - Silver
T58080 T58085 T58099 - Black
T58081 T58086
SWL
D3
D8
D2
D4 lbs
D1 D5
↓
Vertical D9 F
D6 Loads
D7 W Only
www.doughty-usa.com 21
SUPER
Aluminium Clamps
LIGHTWEIGHT CLAMPS
Super Lightweight
Main features:
•
•
SWL 165 lbs
TÜV approval
2”
• Captive bolt
• Fits 2" diameter tubes
• High tensile 6082-T6 aluminium
• Available in polished aluminium or black powder paint
Lightweight
ClampsClamps
Tube Diameters
2.00"
(48 - 51mm) T58124 - Silver
T58122 T5812401 - Black
T58123 - Silver
T5812201 T5812301 - Black
✘
D6 ∅2" (∅48 - 51mm) H5 2.76" (70mm)
W 1.18" (30mm) H6 ∅0.63" (∅16mm)
lbs 0.40 lbs (0.18 Kg) W 1.18" (30mm)
F M10x30 lbs 0.62 lbs (0.28 Kg)
H3
H4
H2 H1
D2
D6 H5
D1 D3
D4 W
D5 H6
www.doughty-usa.com 23
ATOM CLAMPS
Atom Clamps
Main features:
1.00”
1.25”
1.50”
Atom
SWL
D3
D2
∅
F
D1 D4
D5 W
D6
www.doughty-usa.com 25
Atom Clamps
Aluminium
360o
T58885 - 1.00" (25mm) Silver T58880 - 1.00" (25mm) Silver T58875 - 1.00" (25mm) Silver
T58820 - 1.25" (32mm) Silver T58815 - 1.25" (32mm) Silver T58810 - 1.25" (32mm) Silver
T58985 - 1.5" (38mm) Silver T58980 - 1.5" (38mm) Silver T58975 - 1.5" (38mm) Silver
T5888501 - 1.00" (25mm) Black T5888001 - 1.00" (25mm) Black T5887501 - 1.00" (25mm) Black
T5882001 - 1.25" (32mm) Black T5881501 - 1.25" (32mm) Black T5881001 - 1.25" (32mm) Black
T5898501 - 1.50" (38mm) Black T5898001 - 1.50" (38mm) Black T5897501 - 1.50" (38mm) Black
Atom 90o Fixed Coupler Atom Parallel Coupler Atom Swivel Coupler
∅ 1.0" (25mm) ∅ 1.25" (32mm) ∅ 1.5" (38mm)
SWL 220 lbs (100 Kg) SWL 220 lbs (100 Kg) SWL 220 lbs (100 Kg)
D1 1.65" (42mm)
D1 2.20" (56mm)
D1 2.83" (72mm)
D2 3.23" (82mm) D2 3.78" (96mm)
D2 4.33" (110mm)
W 0.83" (21mm) W 1.18" (30mm)
W 1.18" (30mm)
✘
Tube Diameters
1.00", 1.25" & 1.50"
(25mm, 32mm & 38mm)
SWL
lbs
D1
W
D2
✘
D3
D2
E3
F2 F3
D1
D4 F1
E2
SWL
E1
E4 F4
www.doughty-usa.com 27
MAMMOTH CLAMPS
Aluminium Clamps
Main features:
2.50”
SWL
D3
D2
D8
lbs
D7
D1 F
D4
D5 W Vertical
D6
Loads D9
Only ↓
www.doughty-usa.com 29
Aluminium Clamps
Mammoth
360o
o
Mammoth 90 Fixed Mammoth Swivel Coupler Mammoth Parallel Coupler
SWL 1100 lbs (500 Kg) SWL 1100 lbs (500 Kg) SWL 1100 lbs (500 Kg)
D1 3.70" (94mm) D1 3.70" (94mm)
D1 3.70" (94mm)
D2 6.85" (174mm)
D2 6.85" (174mm)
D2 6.85" (174mm)
D3 ∅2.5" (∅60 - 63mm) D3 ∅2.5" (∅60 - 63mm) D3 ∅2.5" (∅60 - 63mm)
W 1.97" (50mm)
W 1.97" (50mm)
W 1.97" (50mm)
lbs 1.98 lbs (0.90 Kg) lbs 1.98 lbs (0.90 Kg) lbs 1.98 lbs (0.90 Kg)
Maximum
Torque
30 N-m Mammoth
22 lb-ft
SWL
lbs
D1 D3
D2
SWL
D3
lbs
D2
D8
D7
D1 F
D4
D5 W
D6 D9
www.doughty-usa.com 31
Aluminium Clamps
Slimline Mammoth
360o 360o
Maximum
Torque
30 N-m Mammoth
22 lb-ft
D3
D1 D2
D6 D4 D3
D5
Aluminium
Trigger
The Doughty Trigger® Clamp is constructed from high tensile
® Clamps
aluminium extrusion making it not only lightweight, but
Clamps
extremely strong, with a safe working load and TÜV approval
of 440 lbs.
Designed to allow one person to hang heavy luminaires and
scanners, the weight of the object being hung becomes it’s
own safety factor by automatically closing the trigger and the
bottom half of the clamp. This unique feature allows the
luminaires to be easily positioned and securely ‘locked off’
using the large tee ‘easygrip’ handle.
Main features:
2"
48 - 51
mm
www.doughty-usa.com 33
Trigger® Clamps
Aluminium
D7
SWL
D3
lbs
D8
D2 D4
↓
D1 Vertical D9
D5
W Loads
D6 Only
lbs 1.61 lbs (0.73 Kg) lbs 2.40 lbs (1.09 Kg)
SWL
D4
D1
lbs
D5
D2
D3 D6
www.doughty-usa.com 35
QUICK
Trigger® Clamps
®
TRIGGER CLAMPS
Aluminium
luminaires and fixtures. The spring loaded jaws stay open and
automatically close with the weight of the object being hung,
leaving both hands free to lift and position the load.
The base of the clamp is slotted to hold either a bolt head or
nut captive without turning.
Main features:
1.5” 2”
36 Doughty Engineering USA inc - Tel (615) 470-5255
Aluminium
Quick Trigger
Clamps
® Clamps
T58200 T58205 T58215
D7
D3
D8
D2 D4
↓
Vertical D9
D1 D5
Loads
W
D6 Only
www.doughty-usa.com 37
Trigger® Clamps
Aluminium
Quick
✘
T58232 - Euro Spec - Silver
T58233 - Euro Spec - Black T58240 - Silver
T58234 - Din Spec - Black T58241 - Black
D1 D4
SWL
D2 D5
D3
lbs
D6
Main features:
1.5”
2”
www.doughty-usa.com 39
Slimline Quick Trigger® Clamps
D7
D3
D8
D4
D2
↓
D1 D5 Vertical D9
D6 W Loads
Only
✘
T58332 - Euro Spec - Silver
T58333 - Euro Spec - Black T58340 - Silver
T58334 - Din Spec - Black T58341 - Black
D1 D4
SWL
D2 D5
D3 D6 lbs
www.doughty-usa.com 41
TITAN QUICK
Titan Quick Trigger® Clamps
®
TRIGGER CLAMPS
The Titan Quick Trigger® range of clamps has been designed to
fit tubes with larger diameters between 2" & 3".
This is the largest clamp in our range manufactured from high
tensile aluminium.
Main features:
2” 3”
D7
D3
D8
D2 D4
F
D1 D5 Vertical
↓
W D9
Loads
D6
Only
www.doughty-usa.com 43
Titan Quick Trigger® Clamps
SWL
D1 D4
D2 D5 lbs
D3
D6
Speciality Couplers
The speciality coupler range is a comprehensive range of
clamps allowing the end user to overcome almost any tricky
rigging situation.
T58130 - Silver
T5813001 - Black
Panel Clamp
D2
SWL N/A
D1 0.2" - 0.39" (5 - 10mm)
D2 ∅2" (∅50.8mm)
D3 0.55" (14mm)
D4
D4 1.73" (44mm)
W 1.18" (30mm)
D3
lbs 0.35 lbs (0.16
D1
W
www.doughty-usa.com 45
Speciality Couplers
D3
SWL
D4
D1
lbs
D2 W1 W2
Aluminium
Pink Eyes Clamps
The Pink Eye is an articulating M12 Eye Nut with a SWL of
1653 lbs, manufactured with forged material 1.6541, high
tensile and annealed. 100% electromagnetic crack detected
according to EN 1677-1. Unlike standard eye nut to DIN 582,
this eye nut can be used for most unfavorable load directions.
These eye nuts can be used with any clamp from the Doughty®
range which accepts M12 fixings and should be mounted with
a 10.9 graded bolt.
✘ ✔
www.doughty-usa.com 47
PIPE TO PIPE COUPLERS
Pipe to Pipe Couplers & Boom Arms
Main features:
SWL
lbs
W
www.doughty-usa.com 49
Pipe to Pipe Couplers & Boom Arms
T57310 - Silver - 10.0" (250 mm)
T57315 - Silver - 20.0" (500 mm)
T57317 - Silver - 30.0" (750 mm)
T57320 - Silver - 40.0" (1000 mm)
✘
Boom Arms
SWL 10.0" 220lbs
SWL 20.0" 110lbs
SWL 30.0" 82.5lbs
SWL 40.0" 55lbs ↓
✔
D1 ∅2" (∅50.8mm)
D2 ∅1.89" (∅48mm)
W 1.97" (50mm)
↓
Maximum
Torque
30 N-m
22 lb-ft
SWL
W lbs
D1 39.37" (1000mm)
D2 29.52" (750mm)
D3 ∅2" (∅50.8mm)
D4 ∅1.89" (∅48mm)
lbs 11.0 lbs (5.0 Kg)
D3
SWL
lbs
D4
D2 Min
D1
www.doughty-usa.com 51
SUPACLAMPS
Supaclamps
D2
D1
D3
Supaclamps
Part No D1 D2 D3 Weight
G1160 - Silver 0.51-1.18" (13 - 30mm) ∅0.59-1.97" (∅15 - 50mm) 1.77" (45mm) 0.99 lbs (0.45 Kg)
G116001 - Black 0.51-1.18" (13 - 30mm) ∅0.59-1.97" (∅15 - 50mm) 1.77" (45mm) 0.99 lbs (0.45 Kg)
Main features:
D1
1/4”
3/8”
D2
Pivot Arm
Part No D1 D2 Weight
G1150 21.02" (534mm) 10.51" (267mm) 2.54 lbs (1.15Kg)
www.doughty-usa.com 53
Supaclamps
M10 x 25 Rotating Stud Snap In 1/4” Camera Spigot M10 Low Profile Socket
G1177 G1178 G1179
5/8" (16mm) x 3/8” Spigot 5/8" (16mm) x 1/4” Spigot 3/8” x 1/4” Spigot
G1180 G1181 G1182
www.doughty-usa.com 55
Supaclamps
Truss Adaptors
Truss Adaptors enable triangular and square truss sections
to be mounted to any of the Doughty® winch stand range.
This system provides the means to lift truss sections into place
safely. The range of Hanging Truss Adaptors have been
designed to suspend truss sections with a chain hoist.
Main features:
2”
www.doughty-usa.com 57
Truss Adaptors
Swivel Truss Adaptor
SWL 440 lbs (200 Kg)
D1 ∅2" (∅50.8mm)
D2 3" (76mm)
D3 3.94" (100mm)
D4 4.53" (115mm)
T55704 - 6" - 10" centres
D5 ∅1.10" T55705 - 8" - 16" centres
20o centres D2
D1
D3
D4
D5
Suitable for all triangular and square truss sections. The Swivel Truss Adaptor allows one person to rig a
truss between two winch stands. Each stand can be raised individually until the required height is achieved.
D5
www.doughty-usa.com 59
Truss Adaptors
Hanging Truss Adaptor
SWL 440lbs (200 Kg)
D1 ∅2" (∅48 - 51mm)
D2 3" (76mm)
D3 3.58" (91mm)
D4 ∅1.18" (∅30mm)
T57214 - 6" - 10" centres
T57219 - 8" - 16" centres
centres D2
D1
D4
D3
Gravlock Coupler
T29497
SWL 1323 lbs (600 Kg)
D1 ∅1.89" (∅48mm)
D2 1.5" (50mm)
D3 0 - 1.77" (0 - 45mm)
Weight 3.24 lbs (1.47 Kg)
D3
D2
D1
D1 T29801
SWL 551 lbs (250 Kg)
D1 5.91" - 7.87" (150 - 200mm)
D2 0.51" (13mm)
D3 2" (56mm)
D3 lbs 2.87 lbs (1.30 Kg)
D2
www.doughty-usa.com 61
Scissor Clamps
SCISSOR CLAMPS
The Scissor Clamp is available in two sizes, Light Duty with a SWL of 220 lbs
(100 Kg) & Heavy Duty with a SWL of 551 lbs (250 Kg). This clamp has been
designed to clamp beams and tubes and has a black powder paint finish.
D1 D4
D2
D3
Scissor Clamp
Light Duty T29850
SWL 220 lbs (100 Kg)
D1 Ø1.89" - 2.36" (48 - 60mm)
D2 6.69" (170mm)
D3 4.47" (120mm)
D4 2.44" (62mm)
lbs 3.09 lbs (1.40 Kg)
Marquee Clamps
The Marquee Clamp is an adjustable clamp specifically
designed for use with clear span marquees using grooved
aluminium Kader style beams. This clamp has a SWL up to
330 lbs (150 Kg) and a bright zinc plate finish.
D1
D2
www.doughty-usa.com 63
HOOK CLAMPS
Hook Clamps
Standard 2" (50mm) Std incl Fixing Kit Straight 2" (50mm)
SWL 88.18 lbs (40 Kg) SWL 88.18 lbs (40 Kg) SWL 88.18 lbs (40 Kg)
D1 3.74" (95mm)
D1 3.74" (95mm)
D1 4.5" (115mm)
D2 0.51" (13mm)
D2 0.51" (13mm)
D2 0.51" (13mm)
D3 ∅2" (∅48 - 51mm) D3 ∅2" (∅48 - 51mm) D3 ∅2" (∅48 - 51mm)
Width 0.98" (25mm) Width 0.98" (25mm) Width 0.98" (25mm)
Kg 0.7 lbs (0.32 Kg) Kg 0.7 lbs (0.32 Kg) Kg 0.73 lbs (0.33 Kg)
✘
↓ M10 x 25 ✔↓
D3 D3 D3
D1 D1 D1
D2
D2 D2
www.doughty-usa.com 65
Hook Clamps
T20105 - Silver
T2010501 - Black T20102 - Silver
D3
D3
D1
D1
D2
D2
D3 D3
D1 D1
D2 D2
www.doughty-usa.com 67
SAFETY BONDS
Safety Bonds
Custom Bonds
Doughty® Engineering supply a full range of bonds to the customers specification.
When ordering custom bonds note the bond length is from loop to loop excluding any hooks.
If a hook is specified with a soft loop, the soft loop will be large enough for the hook to pass
through. A thimbled loop will allow the hook to be attached to the thimble loop. Special loop
sizes can be made on request. Our technical sales team will advise the wire diameter and
hook specification depending on the SWL required. All bonds can be supplied with the SWL,
your company name and contact details printed on a heat shrink sleeve.
Length
Safety Bonds
Wire Hook Length SWL
T2840001 0.08" (2mm) Spring Hook 19.7" (500mm) 11 lbs (5 Kg)
T22001 0.12" (3mm) Carbine Hook 23.6" (600mm) 33 lbs (15 Kg)
T22101 0.12" (3mm) 2 x Carbine Hooks 23.6" (600mm) 33 lbs (15 Kg)
Length
TV Spec Bonds
Wire Hook Length SWL
T2820501 0.16" (4mm) Karabiner 27.6" (700mm) 110 lbs (50 Kg)
T2830501 0.20" (5mm) Karabiner 27.6" (700mm) 165 lbs (75 Kg)
www.doughty-usa.com 69
WALL BRACKETS
Wall Brackets
D2
D3
D2
D1
D1
D3 D2
www.doughty-usa.com 71
HOOKS & EYES
Hooks & Eyes
D2
D1
Quick Links
Size SWL D1 D2 Standard
T23490 M6 441 lbs [200 Kg] 0.55" [14mm] 1.89" [48mm] DIN 56926
T23500 M8 771 lbs [350 Kg] 0.66" [17mm] 2.28" [58mm] DIN 56926
T23505 M10 1102 lbs [500 Kg] 0.78" [20mm] 2.76" [70mm] DIN 56926
T23510 M12 1653 lbs [750 Kg] 0.91" [23mm] 3.19" [81mm] DIN 56926
D1
D2
D3
Karabiners
SWL D1 D2 D3
T28700 881.85 lbs [400 Kg] 1.77" [45mm] 3.46" [88mm] 1.18" [30mm]
Scaffold Clamps
Suitable for 2" (48 to 51mm) diameter steel or aluminium
tube, these clamps are useful for quickly creating grids, frames
and towers for lighting or scenery from standard tube.
They can either be used for temporary or permanent fixtures,
supplied with an electroplate finish.
www.doughty-usa.com 73
SIXTRACK
Sixtrack
Main features:
3
5
4
2 3
1
1 - T63775 Return Pulley 6 - T63750 Adjustable Support Bracket
2 - T63778 Double Guide Pulley 7 - T63752 Overlap Bracket
3 - T63760 End Stop 8 - T63770 Line Support
4 - T63755 Master Runner 9 - T63751 Short Support Bracket
5 - T62756 Ball Raced Runner 10 - T63776 Twin Return Pulley
Recommendations:
1. Maximum length for an overlap track is 59' [18 metres]
2. Maximum length for a single track is 32' 9" [10 metres]
3. Maximum span between supports (cloth open) 7' 4" [2.25 metres]
4. Maximum span between supports (cloth bunched) 5' 3" [1.60 metres]
5. Maximum runner spacing 11.81" [300mm]
6. Maximum load per runner 13.28 lbs [6 Kg]
7. Line guides should be fitted at 8' 2" [2.5 metre] intervals on straight sections
8. Six track has been designed for use with 0.31" (8mm) pre-stretched polyester cord
www.doughty-usa.com 75
Walkalong Track Kits
Sixtrack
2
3
1 - Straight track
2 - T63760 End stops (2 pairs per kit)
3 - T63756 Ball raced runners (1 per 11.81" [300mm] of track)
4 - T63750 Adjustable support brackets (1 per 59.06 [1500mm] of track)
Walkalong Kits
T63941 13' 1" [4.0M] T63945 26' 2" (8.0M) T63949 39' 4" (12.0M)
T63942 16' 4" [5.0M] T63946 29' 6" (9.0M) T63950 42' 7" (13.0M)
T63943 19' 8" [6.0M] T63947 32' 9" (10.0M) T63951 45' 11" (14.0M)
T63944 22' 11" [7.0M] T63948 36' 1" (11.0M) T63952 49' 2" (15.0M)
Sixtrack
Line operated track kits include all the components
required to install your chosen track length. A typical
kit comprises of track, adjustable support brackets, a
nut and bolt set, master runner, pulleys, hauling line,
line supports and a weighted hand pulley.
Note: Other support brackets and fasteners may be
required depending on individual installation methods.
5
2
3
4 1
1 - Hauling line 6
2 - Straight track
3 - T63760 End stops (2 pairs per kit)
4 - T63755 Master runner (1 per Kit)
5 - Pulleys (1 return pulley & 1 twin head pulley)
6 - T63756 Ball raced runners (1 per 11.81" [300mm] of track)
7 - T63750 Adjustable support brackets (1 per 59.06" [1500mm] of track)
8 - Line support and weighted hand pulley (not shown)
www.doughty-usa.com 77
Line Operated Track Kits with Overlap
Sixtrack
2 7
6
5
4 1
3
1 - Hauling line
2 - Straight track
3 - T63760 End stops (2 pairs per kit)
4 - T63755 Master runner (2 per kit)
5 - Pulleys (2 guide pulleys, 1 return pulley & 1 twin head pulley)
6 - T63756 Ball raced runners (1 per 11.81" [300mm] of Track)
7 - T63752 Overlap brackets (2 per Kit)
8 - Line supports, weighted hand pulley and adjustable support brackets (not shown)
Sixtrack
(75mm)
2.95”
(111mm)
4.37”
(95mm)
3.74”
0.35”
(9mm)
Straight Track
T63705 Six Track Straight - 0' 9" (0.25 metre) 1.38 lbs (0.63 Kg)
T63706 Six Track Straight - 1' 7" (0.50 metre) 2.62 lbs (1.19 Kg)
T63707 Six Track Straight - 2' 5" (0.75 metre) 4.39 lbs (1.99 Kg)
T63708 Six Track Straight - 3' 3" (1.00 metre) 5.93 lbs (2.69 Kg)
T63710 Six Track Straight - 6' 7" (2.00 metre) 9.85 lbs (4.47 Kg)
T63715 Six Track Straight - 9' 10" (3.00 metre) 14.79 lbs (6.71 Kg)
Radius
measured on
centre line
of Track
Curved Track
90 Degrees 45 Degrees
o o
T63730 19.69" (0.50m) x 90 (1.96 Kg) T63735 19.69" (0.50m) x 45 (1.00 Kg)
o o
T63733 23.62" (0.60m) x 90 (2.17 Kg) T63736 29.53" (0.75m) x 45 (1.40 Kg)
o o
T63731 29.53" (0.75m) x 90 (2.73 Kg) T63737 39.37" (1.00m) x 45 (1.82 Kg)
(3.50 Kg) Notes: 2.0 metre curves are supplied as 2 sections
o
T63734 35.43" (0.90m) x 90
o 3.0 metre curves are supplied as 3 sections.
T63732 39.37" (1.00m) x 90 (3.62 Kg)
o
Special straight sections and radius curves can be
T63738 78.74" (2.00m) x 90 (7.20 Kg)
made to order, contact our technical sales team.
o
T63739 118.11" (3.00m) x 90 (10.8 Kg)
www.doughty-usa.com 79
Points System
Sixtrack
(150mm)
5.91"
39.37" (1000mm)
Operating Lever
www.doughty-usa.com 81
Sixtrack
(45mm) (33mm)
1.77” 1.3”
(73mm)
(73mm)
2.87”
2.87”
0.35” 0.2”
(9mm) (5mm)
(116mm) (6mm)
(104mm) 4.56” 0.23”
4.09”
26mm
1.02”
65mm
2.56”
M12
2.36”
(60mm)
www.doughty-usa.com 83
Sixtrack
(115mm)
4.5”
∅2”
(48mm)
1.67”
(42.5mm)
Barrel Bracket
T63753 Barrel Bracket
Barrel Brackets are used to suspend overlap curtain tracks from a 1.89" (48mm) barrel, truss section
or lighting bar.
(85mm)
3.35”
(150mm)
5.91”
www.doughty-usa.com 85
Sixtrack
Hauling Line
T63780 Hauling Line 656' (200m)
0.31" (8mm) black pre-stretched polyester
Sixtrack
655mm
25.79”
90°
555mm
21.89”
1445mm
56.89”
25.79” 12.99”
655mm 330mm
Floor Mounted
Manual Track Drives
www.doughty-usa.com 87
Stands
Stands
D1
D2
D3
www.doughty-usa.com 89
Winch Stands
D1
D2
D1
D2
www.doughty-usa.com 91
Winch Stands
D1
D2
D3
D2
D3
www.doughty-usa.com 93
SPIGOTS
Spigots
D6 1.18" (30mm)
D1
Kg 1.3 lbs (0.59 Kg)
Studio Rail
Studio Rail is an extruded aluminium rail available with
all the necessary components required to install a
comprehensive overhead studio rail system.
www.doughty-usa.com 95
Studio Rail
Maximum distance between supports = 59” (1500mm)
↓ ↓
Maximum load between supports = 220 lbs (100 Kg)
Maximum distance
between spacers
= 59” (1500mm)
5.91” (150mm)
1.37”
35mm
Straight Rail
Silver Black
T84000 6' 7" (2.00m) 6.39 lbs (2.90 Kg) T84035 6' 7" (2.00m) 6.39 lbs (2.90 Kg)
T84005 10' 11" (3.00m) 9.48 lbs (4.30 Kg) T84040 10' 11" (3.00m) 9.48 lbs (4.30 Kg)
T84010 13' 11" (4.00m ) 12.79 lbs (5.80 Kg) T84045 13' 11" (4.00m ) 12.79 lbs (5.80 Kg)
T84015 19' 8" (6.00m) 18.96 lbs (8.60 Kg) T84050 19' 8" (6.00m) 18.96 lbs (8.60 Kg)
R59
R53
R47
R41 Radii measured to centre of rail
R35 allowing 5.91” (150mm) rail
centres with multiple rail
R30
systems.
5.91” (150mm)
Each curve has a 5.91”
(150mm) straight lead in to aid
assembly.
T84017 R=30" 4.73 lbs (2.15 Kg) T84052 R=30" 4.73 lbs (2.15 Kg)
T84018 R=35" 5.49 lbs (2.49 Kg) T84053 R=35" 5.49 lbs (2.49 Kg)
T84019 R=41" 6.24 lbs (2.83 Kg) T84054 R=41" 6.24 lbs (2.83 Kg)
T84020 R=47" 7.01 lbs (3.18 Kg) T84055 R=47" 7.01 lbs (3.18 Kg)
T84025 R=53" 7.34 lbs (3.51 Kg) T84060 R=53" 7.34 lbs (3.51 Kg)
T84030 R=59" 8.49 lbs (3.85 Kg) T84065 R=59" 8.49 lbs (3.85 Kg)
www.doughty-usa.com 97
Studio Rail
100mm
100mm 3.94”
50mm
100mm
1.97”
3.94” 25mm
3.94”
0.98”
100mm
3.94”
M10 Countersunk
100mm
3.94”
o
0 - 45
100mm
3.94”
5.91” 5.91”
5.91” 150mm 150mm
150mm
90° Crossover Bracket Spacer Plate Double Rail Spacer Plate Triple Rail
T84130 (0.65 Kg) T84110 1.00 Kg T84115 1.30 Kg
SWL 220 lbs (100 Kg) SWL N/A SWL N/A
Supplied with 4 x Rail Clamps. Supplied with 4 x Rail Clamps Supplied with 6 x Rail Clamps.
End Stops
www.doughty-usa.com 99
Studio Rail
0.31”
19mm
0.75”
8mm
9.49”
240mm
1.3” 3.94”
33mm 100mm
M8
40mm
1.57”
D1 D3
D2
D1 D3
D2
D1 D3
www.doughty-usa.com 101
Studio Rail
26mm
1.02”
68mm
68mm
2.68”
2.68”
65mm
2.56”
D2
Cupped Curtain Brake
SWL D1 D2 Weight
T84230 N/A 1.77" (45mm) 4.33" (110mm) 0.77 lbs (0.35 Kg)
Predominantly used to anchor each end of a curtain.
D3
D2
D1
D3
D2
D1
www.doughty-usa.com 103
Studio Rail
D3
SWL D1
D2 D2 D3 Kg
D1
D1
T84516 supplied with ∅0.5" x 78.74" (∅25mm x 2.0m tube) Working Load up to 55.12 lbs (25 Kg)
Fitted to a six wheel carriage with friction brake the Swivel Arms position can easily be adjusted on a
length of Studio Rail. The Swivel Arm enables 360° positioning of leg/wing curtains or light scenery
traditionally used to aid masking of wing space on stage from audience sight lines.
www.doughty-usa.com 105
Studio Rail
D1 D2
Operating Poles
D1 D2 Weight
T84249 62.99" (1600mm) 110.27" (2800mm) 2.20 lbs (1.00 Kg)
T84250 78.74" (2000mm) 145.67" (3700mm) 2.65 lbs (1.20 Kg)
T84251 82.68" (2100mm) 181.10" (4600mm) 3.09 lbs (1.40 Kg)
T84252 82.68" (2100mm) 216.54" (5500mm) 3.97 lbs (1.80 Kg)
T84253 108.27" (2750mm) 291.34" (7400mm) 4.85 lbs (2.20 Kg)
A lightweight telescopic anodised aluminium operating pole fitted with a replaceable hook.
106 Doughty Engineering USA inc - Tel (615) 470-5255
PANTOGRAPHS
Pantographs
The Doughty® Spring Pantographs have been designed to be
lightweight and compact, with strength, safety and ease of use being
the main features. Loads from 5 to 79.36 lbs (5 to 36 Kg) can be
suspended from overhead tracks or barrels and quickly positioned
with height ranges of 86.61 to 196.85" (2.2 to 5 metres).
Pantographs
Pt No Springs SWL Length Weight
G1660 2 26.46 lbs (12 Kg) 86.61" (2.20m) 14.99 lbs (6.80 Kg)
G1662 2 26.46 lbs (12 Kg) 118.11" (3.00m) 21.16 lbs (9.60 Kg)
G1664 2 26.46 lbs (12 Kg) 157.48" (4.00m) 28.66 lbs (13.00 Kg)
G1666 2 26.46 lbs (12 Kg) 196.85" (5.00m) 36.15 lbs (16.40 Kg)
G1670 3 44.09 lbs (20 Kg) 86.61" (2.20m) 16.53 lbs (7.50 Kg)
G1672 3 44.09 lbs (20 Kg) 118.11" (3.00m) 22.71 lbs (10.30 Kg)
G1674 3 44.09 lbs (20 Kg) 157.48" (4.00m) 29.98 lbs (13.60 Kg)
G1676 3 44.09 lbs (20 Kg) 196.85" (5.00m) 37.48 lbs (17.00 Kg)
G1680 4 59.52 lbs (27 Kg) 86.61" (2.20m) 16.53 lbs (7.50 Kg)
G1682 4 59.52 lbs (27 Kg) 118.11" (3.00m) 22.71 lbs (10.30 Kg)
G1684 4 59.52 lbs (27 Kg) 157.48" (4.00m) 22.92 lbs (10.40 Kg)
G1686 4 59.52 lbs (27 Kg) 196.85" (5.00m) 37.48 lbs (17.00 Kg)
G1694 5 79.36 lbs (36 Kg) 157.48" (4.00m) 22.92 lbs (10.40 Kg)
G1696 5 79.36 lbs (36 Kg) 196.85" (5.00m) 37.48 lbs (17.00 Kg)
www.doughty-usa.com 107
Part Number Index
Part Number Index
www.doughty-usa.com 109
Part Number Index
Part No Page Part No Page Part No Page
www.doughty-usa.com 111
Index by Name
Name Index
www.doughty-usa.com 113
Note: Whilst every effort has been made to ensure that the information contained
within this catalogue is correct, Doughty Engineering does not accept any liability
for errors or omissions. Specifications and technical data are intended for guidance
purposes only and may vary.
The buyer shall indemnify the seller against all claims in respect of any loss, injury,
or damage sustained by a third party arising from the sale of the goods to the
buyer howsoever caused and also against all actions, proceedings, costs, claims,
demands and expenses brought or claimed against the seller in respect of the
infringement of any patent, trademark, registered design or similar right arising
from the manufacture or supply of any goods or the doing of any work or the use of
any article or material by the seller to the design or specification or upon the
instructions or order of the buyer.
www.doughty-usa.com 65
Doughty USA - Little Blue Book - Issue Two
Easy Lift - Wind Up Stands