Beruflich Dokumente
Kultur Dokumente
Progressive’s Friction Pullers can be used to uniformly draw floating plates and inserts.
Designed to replace shoulder bolts, the Friction Pullers initiate movement and utilize friction
at a particular setting to release the plate when travel limits are reached.
catalog d l t h hd Maximum
number Force
H Hex Hole Depth
L L
(Each)
D D
D
Receiving Receiving
Hole
Hole finish Hole finish Hole
Receiving = µ Ra .4-1.6 Diameter Diameter
= µ Ra .4-1.6
Hole
Diameter
Floating Floating
D D D D or InsertPlate or Insert
Plate
+.10mm +.10mm
Floating +.15mm +.15mm
Interference Interference
D Plate or Insert Adjusted Adjusted
on Friction on Friction
Puller Puller
HD HD
2mm R 2mm R
ce 3mm 3mm
d PL PL PL PL
n 10mm 10mm
Minimum Minimum
HD
2mm R
mm D D D D
Fastener
Technical Information:
• For mold maintenance, before removing the mold from the press, rotate the
screw counter-clockwise 3/4 turn. This will allow easy separation of plates.
• Maximum operating temperature is 250° F (120° C).
Hemisphere
• Fastener includes Nylok® patch for secure installation.
• The hemisphere is plated for additional lubricity during adjustments.
• Friction Pullers are self-venting. Additional venting not required when using
blind holes. Resin
• Replacement items are available. Contact Customer Service for availability.