Beruflich Dokumente
Kultur Dokumente
Answer:
(a)
(b) (i)
(ii)
2. Set square and protractor are not allowed for part (a).
(a) Start from straight line JK in the below diagram, construct the above diagram according to its
actual size.
(b) Based on the diagram drawn in part (a),
(i) measure the distance between K and L,
(ii) measure KLM .
Answer:
(a)
(b) (i)
(ii)
3. Set square and protractor are not allowed for part (a).
(a) Start from the straight line PQ and QR in the below diagram,
(i) construct a parallelogram PQRS.
(ii) construct an angle of 45 at P on the line PQ.
(b)
(i) construct a line ST from point S which is perpendicular to the line constructed in (a)(ii) and point T
rest on the line.
(ii) measure the distance between S and T.
Answer:
(a)
(b)
4. Set square and protractor are not allowed for part (a).
(a) Start from straight line AB in the below diagram, construct the above diagram according to its
actual size.
(b) Based on the diagram drawn in part (a),
(i) measure the distance between A and D,
(ii) measure ADC .
Answer:
(a)
(b) (i)
(ii)
5. Set square and protractor are not allowed for part (a).
(a) Start from the straight line QR and RS in the below diagram,
(i) construct a trapezium QRST such that TQR 90 and RST 45 .
(ii) construct a line from point R to line ST which is perpendicular to straight line ST.
(b) Based on the diagram drawn in part (a), measure QTS .
Answer:
(a)
(b)
6. Set square and protractor are not allowed for part (a).
Answer:
(a)
(b)