Beruflich Dokumente
Kultur Dokumente
Substrate Information
of colors.
Xylan 1424 coatings will withstand most sol-
Xylan 1424 coating can be applied to many vents, waters, automotive fluids and fuels up to
types of substrate material such as aluminum, 200°F. Xylan 1424 coatings are impervious to new
brass, high alloy steels, carbon steel, stainless water base hydraulic fluids used in offshore oil
production.
Use Temperature
steel, titanium and zinc plating.
1424 Changes in 1424
Xylan 1424 coating can be used continuously Chemical Resistance after 24 hrs exposure
from -58°F (-50°C) to +350°F (+176°C) and can HCI (concentrated) @room temp. None
survive up to +400°F (+204°C) intermittently. HCI (pH 2) room temp. None
HCI (pH 2) 125°F None
If higher temperature service is required,
NaOH (50%) room temp. None
please contact your Whitford representative for
NaOH (12.5) room temp. None
Corrosion Resistance
recommendations.
NaOH (pH 9.5) 125°F None
MEK room temp. Slight Mark
Xylan 1424 coating applied at 1 mil (25 micron) Toluene room temp. Slight Mark
dry film thickness, over zinc phosphated steel Castrol Hydraulic Fluid 200°F Gloss decrease: 25.6 to 24.1.
panels, has exceeded 1500 hours of ASTM B-117 No loss in coating integrity.
salt fog test. With the same pretreatment, 30 Oceanic HK-540 200°F Gloss decrease: 29.9 to 10.3.
cycles DIN 50018 (2.0 liters SO2) Kesternich Test Color lightened slightly.
No loss in coating integrity.
are achieved. Both with less than 15% red rust.
Xylan 1424 coatings will provide even better Application Instructions
corrosion protection if used over a sacrificial
Please refer to the Whitford Product Data
primer like Xylan 5211, Xylar 1, Xylar P51 or zinc
Sheet for application information or contact your
Physical Properties
plating
Whitford representative for more information.
07/08