Beruflich Dokumente
Kultur Dokumente
MC10x series
Fast Ethernet Media Converters
AT-MC101XL Simple Installation Key Features
TX to FX Fast Ethernet media converter with All the media converters feature Auto
multi-mode ST fiber connectors MDI/MDI-X, allowing the converter to be • Half and full-duplex operation
AT-MC102XL connected to either a PC, hub or switch with a • Transparent to IEEE 802.1Q packets
TX to FX Fast Ethernet media converter with simple UTP cable.The media converters also
multi-mode SC fiber connectors allow the installer to test the integrity of fiber • Rack-mountable using optional
connection, by forcing the converters to AT-MCR12, AT-TRAY4 or AT-TRAY1 chassis
AT-MC103XL
TX to FX Fast Ethernet media converter with communicate over the fiber cable.This ‘Link Test’ • Wall-mountable using AT-WLMT
single-mode 15km SC fiber connectors feature allows installers to check for cable faults
without the need for expensive fiber optic test • Auto MDI/MDI-X
AT-MC103LH
TX to FX Fast Ethernet media converter with equipment. • MissingLink™
single-mode 40km SC fiber connectors
• Link Test
Standalone or Rack-mounted
Fiber Connections Each small media converter is powered by an • RoHS Compliant
The Allied Telesis range of Fast Ethernet Media external power supply unit for use in standalone
converters provides a complete family of applications. Where multiple media converters
conversion devices, allowing users to extend the are being used, up to 12 standalone devices can
size of UTP networks with the use of fiber be inserted into a low-cost rack-mount chassis,
cabling. Supporting both SC and ST fiber allowing all the converters to be powered by a
connectors, these converters can be used to single internal power supply. In critical
extend networks with up to 2km of multi-mode applications, a second load sharing internal
fiber or 40km of single-mode fiber. power supply can be installed into the rack-
mount chassis.
Auto-Negotiation and MissingLink™
The MissingLink™ feature enables the fiber Hassle Free Support
optic ports on the media converter to pass the Allied Telesis Fast Ethernet media converters
‘Link’ status of their connections to each other. offer free technical support, ensuring trouble-
When the media converter detects a problem free installation.
with one of the ports, such as the loss of
connection to an end-node, the media
converter shuts down the connection to the
other port, thus notifying the node that the
connection has been lost.
Switches
ML - Link Test Enable MissingLinkTM
A/N Enable Auto-negotiation
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00275-00 Rev G