Beruflich Dokumente
Kultur Dokumente
EXHAUST
TIRES &
Dual Rail WHEELS
Utility Box
Dual Rail
Single Rail Stone Guard CONTROL
Utility Boxes
SEATS &
GRAPHICS
Optional BODY
Center Rail
Combo Trailer
Replacements
ON PAGE 911
ENGINE
KENDON TRAILERS ® Optional Suggested
Accessories
• Round tube construction
• Removable rails for ATV or utility use (not included)
• 2 pair tiedowns per bike FUEL & AIR
• Larger casters
• Improved wheel chock system • 1 pair soft ties per bike
• Wider center-to-center rail width. Holds any size • 1 pair wheel tiedowns per bike
rear bike tire • 1 cable lock per bike DRIVE
Combo Trailer Shown Upright
• Lower platform and longer ramps for easier loading
• Full size spare tire mount Description P/N Retail
• Folds up and stands up for easy storage Single Rail 250 lb. Trailer - 1000 lb. capacity 77-5490 $2018.95
• Double frame construction BRAKE
Dual Rail 350 lb. Trailer - 2000 lb. capacity 77-54911 2414.95
• Powder-coated finish Combo Trailer 390 lb. -1000 lb. capacity 77-5489 2018.95
• Chrome 13” wheels and tires Single Rail Utility Boxes (Pair) 77-5493 313.95
• Independent rubber torsion suspension Dual Rail Utility Box 77-5492 307.95 SUSPENSION
• E-Z Lube axle system Single Rail Stone Guard 77-5494 298.95
• 2” coupler Dual Rail Stone Guard 77-5495 298.95
• Platform: 5’x7’ Optional Center Rail 77-5488 129.95
• Trailer jack stand sold separately 13” Full size replacement tire 2006 Vin #’s & up 77-5524 129.95 ELECTRICAL
• 1-year manufacturer’s warranty on the trailer frame Replacement Loading Ramp 77-5498 69.95
• 5-year manufacturer’s warranty on the axle Trailer Jack Stand 77-5499 45.95
1
Trailer comes with 1 loading ramp.
CHEMICAL
KENDON® COMBO TRAILERS Must purchase additional ramp (77-5498) for ATV use
• Transport 3 dirt bikes or 1 big cruiser
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
SHOP
KENDON® TRAILER WINCH KIT SUPPLIES
• Kit contains winch and cable, mounting post, electrical cables, control box and
manual crank handle
• Powerful 12 volt DC winch with 6000 lb. rolling load capacity DISPLAY
& PROMO
• Hand-held winch control box with 20 ft. cord
• Winch drum has hook and 30 ft. of 3/16” aircraft cable
• Winch post clamps onto trailer tongue, no drilling, (hardware supplied) CROSS
KENDON® TRAILER COVERS • Winch post attaches to all Kendon Trailers REFERENCE
Application P/N Retail • Electrical power is supplied by tow-vehicle battery
Round Tube Single Rail 77-5496 $187.95 • Connect the tow cable, hold onto your bike – winch pulls bike onto trailer 905
Round Tube Dual Rail 77-5497 198.95 77-5544 $313.95
EXHAUST DROP-TAIL
DIRT BIKE TRAILERS
Standard Features:
TIRES & • Heavy-duty torsion axle
WHEELS • Integrated hydraulic Drop-Tail System
• 13” custom wheels with radial tires
• Powder-coated finish
CONTROL • L.E.D. lights
• Tailgate/Ramp
• Stone-guard
SEATS &
GRAPHICS
BODY
PIT BIKE
ENGINE
DRIVE
BRAKE
DROP-TAIL DROP-TAIL
SUSPENSION
TWO-UP THREE-UP
DIRT BIKE TRAILER DIRT BIKE TRAILER
Specifications: Specifications:
• Class II trailer • Class II trailer
ELECTRICAL • 2 PROLYTE Cycle Chocks • 3 PROLYTE Cycle Chocks
• 2” hitch ball • 2” hitch ball
• GVWR 2,600 lbs. • GVWR 2,700 lbs.
• Empty weight: 550 lbs. • Empty weight: 660 lbs.
CHEMICAL • Load capacity: 2,100 lbs.
• Load capacity: 2,000 lbs.
• Deck area: 60” x 105” • Deck area: 70” x 105”
• Max length: 126” • Max length: 126”
SECURITY & • Max width: 81” • Max width: 91”
TIEDOWNS • Stand-up height: 94”
• Stand-up height: 94”
• Stand-up depth: 40” • Stand-up depth: 40”
• Tire Size: ST175/80R13 radial trailer tires • Tire Size: ST175/80R13 radial trailer tires
TRAILER & Trailer Configured to Transport:
STANDS Trailer Configured to Transport:
• 1 to 2 dirt bikes, 1 ATV or simply for utility • 1 to 3 dirt bikes, 1 to 2 ATVs, UTV, golf
flatbed use cart or simply for utility flatbed use
• Drop Shipped Only • Drop Shipped Only
TOOLS 77-5602 $2350.00
77-5603 $2250.00
SHOP
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
906
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BODY
BRAKE
DROP-TAIL DROP-TAIL DROP-TAIL
2000 POWERSPORT 2100 POWERSPORT STORAGE AND TOOL BOXES
UTILITY TRAILER UTILITY TRAILER • Durable, welded aluminum lid with
SUSPENSION
Specifications: Specifications: integrated air spring
• Class II trailer • Class II trailer • Keyed lock
• 2” hitch ball • 2” hitch ball • Bolts to trailers using “modular” knob
• GVWR 2,600 lbs. • GVWR 2,700 lbs. bolts used for attaching all Drop-Tail ELECTRICAL
• Empty weight: 525 lbs. • Empty weight: 625 lbs. Cycle Chocks
• Load capacity: 2,000 lbs. • Load capacity: 2,100 lbs. • Drop Shipped
• Deck area: 60” x 105” • Deck area: 70” x 105” Description P/N Retail
Small (for use with 81” wide CHEMICAL
• Max length: 126” • Max length: 126”
• Max width: 81” • Max width: 91” trailer models) 77-5607 $179.00
• Stand-up height: 94” • Stand-up height: 94” Large (for use with 91” wide
• Stand-up depth: 40” • Stand-up depth: 40” trailer models) 77-5606 199.00 SECURITY &
TIEDOWNS
• Tire Size: ST175/80R13 radial trailer tires • Tire Size: ST175/80R13 radial trailer tires
Trailer Configured to Transport: Trailer Configured to Transport:
• 1 ATV or simply for utility flatbed use • 1 to 2 ATVs, UTV, golf cart or simply for TRAILER &
• Drop Shipped utility flatbed use STANDS
77-5605 $2050.00 • Drop Shipped
77-5604 $2150.00
TOOLS
DROP-TAIL
77-5609 STONE-GUARD KITS SHOP
• Custom aluminum Stone-Guard with all SUPPLIES
hardware to attach to trailer
• Rubber molded trim for top edge of
Stone-Guards DISPLAY
• Easily bolts to all Drop-Tail Trailer models DROP-TAIL & PROMO
• Drop Shipped SPARE/REPLACEMENT
Description P/N
Small (for use with 81” wide
Retail WHEEL AND TIRE SET CROSS
• 13” custom chrome wheel REFERENCE
trailer models) 77-5609 $109.00 • Radial trailer tire: ST175/80R13
Large (for use with 91” wide • Drop Shipped 907
trailer models) 77-5608 119.00 77-5610 $149.00
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS RISK RACING™ LOCK-N-LOAD
• Securely holds motocross bike into trailer without the use of
tiedown straps, floor anchors or wheel chocks
• Frees up valuable space allowing the ability to transport more
BODY motorcycles or gear
TRAVELRACK • Takes an enormous amount of pressure off of fork seals
during transit
MOTORCYCLE CARRIER
PIT BIKE • Fits any Class III hitch • Can be quickly removed from the trailer floor by unscrewing the
4 thumb screws leaving only the low profile mounting plates
• Aluminum rails make it light and easy to store • Each plate has a “D” ring for additional anchor points on your
• Rated for 500 lbs., so that it will haul more than trailer floor
ENGINE the design limit of any Class III hitch • Simply roll or ride bike into trailer until the footpegs hit the open
• Note: The tongue weight of a receiver-type hitch is rated at the jaws of the Lock-N-Load. Then step on the upper jaws and they
distance the ball normally is from the end of the receiver. Most will automatically lock into place
carriers of this type are approximately double that distance so • To release bike, simply rotate the knobs into the release position
FUEL & AIR the load rating is normally reduced by 1/2. A 500 lb. rated and step on the top jaws
hitch will carry about 250 lbs. Check with your hitch • For additional safety, insert the attached locking pins prior
manufacturer to transport
• Accessory ramp includes 39” loading ramp with a bolt-on • You can replace the locking pins with padlocks for added
DRIVE security and a theft deterrent
bracket to carry the smaller ramp on the carrier
Description P/N Retail • Designed for use with 125cc-450cc modern motocross specific
Carrier - 74” long 59-0226 $244.95 bikes, or bikes with similar geometry regarding footpeg width
BRAKE Accessory Ramp 39” long 59-0227 44.95 and height
• Accessories include (may order separately): Extra Trailer Plates
which allow user to mount Lock-N-Load to multiple trailers;
Truck Bed Adapter Plates which allow user to mount in van or
SUSPENSION truck bed
Description P/N Retail
Lock-N-Load 77-8292 $179.00
Extra Trailer Plates 77-8299 29.99
ELECTRICAL Truck Bed Adapter Plates 77-8298 29.99
CHEMICAL
SECURITY &
TIEDOWNS
TRAILER &
STANDS
CYCLE COUNTRY™
TOOLS MOTORCYCLE
WEDGE-LOK CARRIER
• Wedge-Lok design helps reduce rattle and improves motorcycle
SHOP P-LOK STRAPLESS carrier stability
SUPPLIES MOTORCYCLE LOCKDOWN SYSTEM • Fits any 2” Class III hitch
• Rated for 400 lbs., so will fit most dirt bikes and scooters
• Minimizes jarring and shifting while maximizing usable
storage space • Bike deck is 72” long and includes 4 tiedown points
DISPLAY
• Helps deter theft when used in conjunction with a lock • Constructed of 7 gauge steel and powder-coated for long
& PROMO lasting quality
• Increases fork seal life up to 300%
• Includes ramp for easy, single person loading and unloading
• Single person operation (ramp stores between the wheels)
CROSS • Simply set the system, insert rod through footpeg, step down to • Quick and easy to assemble
REFERENCE sag height, insert set pin and you are locked and loaded • Tough texture paint for long lasting finish
• P-Lok system includes a 21" track, 2 P-LOK bars, 2 P-LOK rods, • Has 3 different holes to adjust for different size scooters
908 2 detent ring pins and a tool case and bikes
10-0959 $249.95 56-6236 $218.99
OFFROAD • TUCKER ROCKY DISTRIBUTING
TRAILER & STANDS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TRAILER & STANDS
TRAILER ACCESSORIES
EXHAUST
TIRES &
WHEELS
CONTROL
BODY
PIT BIKE
ENGINE
15-0081
FUEL & AIR
10-0054
DRIVE
PRAIRIE VIEW
HIGH ROLLER UTILITY JUG/FUEL
TIE BARS CAN TRAVEL RACKS BRAKE
• Provides extra support for the front of truck loads • Single, double and triple racks for square jugs
• 3 locations for the front wheels and 8 secure tie down • Can also be bolted to floor of enclosed trailer
locations • Lockable retention bar and all hardware included
• Heavy-duty steel construction with a powder-coated finish Description Square P/N Retail SUSPENSION
• 2 sizes to fit all trucks: 58” for full-size, and 53” for Single jug offset base rack Alloy 15-0067 $89.99
mid and small trucks
Double jug offset base rack Alloy 15-0073 119.99
• Optional tie bar kicker for hauling 3 motorcycles
• Easy mount hardware included Triple jug offset base rack Alloy 15-0081 139.99 ELECTRICAL
Description P/N Retail
58” Tie Bar 10-0054 $94.95
53” Tie Bar 10-0055 94.95
Tie Bar Kicker 10-0056 42.95 CHEMICAL
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
SHOP
SUPPLIES
FULTON® DISPLAY
SPARE TIRE CARRIER FULTON® TONGUE JACK & PROMO
• Mounts tire up and out from the trailer FULTON ®
• Raise or lower trailer tongue
frame SPARE TIRE CARRIER • Clamps on to most square or
• Heavy-duty galvanized construction • Extra length allows the handling rectangular trailer tongues CROSS
• Fits 4 or 5-lug wheels, tongues up to 3” of extra wide tires or wider tongues • Swivels out of the way when pulling REFERENCE
wide by 4” high • Will fit either 4 or 5-hole rims trailer
15-5825 $40.95 15-5824 $12.95 • 1200 lb. tongue wt. capacity 909
15-5820 $94.95
BODY
BEARING SETS 37-0676 37-0677
• Set contains 2 bearing cones, 2 bearing
cups, 1 grease seal, and 1 cotter pin
PIT BIKE • No dust cap included
• 1” is for straight spindle
• Sold individually
ENGINE Description P/N Retail REPLACEMENT HUBS
Fits 1” spindle 15-5845 $24.95 • High-speed replacement hub for trailers
• Fits 1” spindles
• Complete with bearings, seals, dust cap and nuts
FUEL & AIR Description P/N Retail
BEARING PROTECTORS 4 Hole, 4” Spacing 37-0676 $31.95
• Replaces dust cap on trailer hubs 5 Hole 37-0677 31.95
DRIVE • Lubricates and protects bearings
• 2” O.D. sold in pairs
• Includes protector covers
15-5826 $28.95
BRAKE
TRAILER &
STANDS FULTON® COUPLERS
FULTON BALL MOUNT
®
Description P/N Retail
1-7/8” Ball – 2” Tongue 15-5801 $25.95
TOOLS
SECURITY PIN 2” Ball – 2” Tongue 15-5803 33.95
15-5810 $12.99
2” Ball – 3” Tongue 15-5804 33.95
SHOP
SUPPLIES
PRO ARMOR TRAILER
DISPLAY
HITCH COVER
• Made from lightweight,
& PROMO
durable aluminum
FULTON ®
• Powder-coated black to resist
CROSS BALL MOUNT 2” DROP scratching and chipping
REFERENCE • Steel construction • Includes pin and clip to secure to receiver
• Black powder-coated • Fits 2” receivers
• 2” x 2” • Includes high-density foam to eliminate rattle
910 15-5809 $25.99 37-5391 $24.95
EXHAUST
TIRES &
WHEELS
CONTROL
WESBAR® TAILLIGHTS
• Low-profile, waterproof taillight
• Replaceable sealed lamp capsule SEATS &
• Flush or recess mounting GRAPHICS
• 15” pigtail and mounting hardware
WESBAR® • 8” L x 2-7/8”H x 2-3/4”D
UNDER 80” TAIL LAMPS WESBAR® SUBMERSIBLE • Sold individually BODY
• Designed for a wide variety of trailers Description P/N Retail
• Meets D.O.T. requirements for: stop, UNDER 80” TAILLIGHT KIT RH Assembly 15-5870 $35.95
turn, tail and side marker light, side and • Uses a diving bell/trapped air system
LH Assembly 15-5871 35.95
rear reflectors to keep bulbs dry and safe PIT BIKE
• Left hand has built-in LP illuminator • All lamps are pre-wired for installation
• Compact design • Conforms to all applicable D.O.T. 108
4.7”W x 4.7”H x 2.8” deep regulations
• Push-in wiring connections • Kit contains: 2 multi-function submersible ENGINE
• Mounts with 2 1⁄4” studs on industry taillights with gasketed lenses; 1 license
standard 2” centers plate bracket; 1-20 ft. wishbone trailer
Description P/N Retail wiring harness, 1-4 ft. trunk connector
Left Hand Tail Lamp 15-9660 $10.95 and accessory bag with frame clips FUEL & AIR
Right Hand Tail Lamp 15-9661 10.95 and wire taps
Description P/N Retail
Taillight Kit 15-9663 $50.95
WESBAR® LENS SET
Repl. License Plate Bracket 15-9664 4.95 • Fits all low-profile Wesbar taillights DRIVE
21-5223 • Order 1 for each light
21-5224 15-5876 $10.95
BRAKE
SUSPENSION
STANDARD
ELECTRICAL
TRAILER CONNECTORS WESBAR®
• Perfect for a wide range of trailer
hook-ups WESBAR® WATERPROOF ROUND 7-WAY TO 4-WAY
• Ideal for connecting electrical systems REPLACEMENT CAPSULE FEMALE ADAPTER CHEMICAL
• Molded case ensures all year weather • Replacement waterproof light capsule • Converts 7-way connector with blade
protection • Fits right or left Wesbar taillights type terminals to standard 4-way flat
Description P/N Retail • Sold individually connector
SECURITY &
2-Pole Flat Type 21-5223 $6.95 15-5875 $17.95 15-9662 $35.95 TIEDOWNS
4-Pole Square Type 21-5224 7.45
TRAILER &
STANDS
TOOLS
SHOP
SUPPLIES
DISPLAY
WESBAR® WESBAR® WESBAR® & PROMO
TAILLIGHT CONVERTER TRUNK/TRAILER KIT TRAILER WIRING KIT
• Converts foreign and domestic vehicles • 4 ft. trunk connector • Complete with all hardware and CROSS
with separate turn signals to trailer • 18” trailer connector instructions REFERENCE
lighting specifications 15-5830 $8.95 • 25 ft. with connectors
• All electronic. 60” lead • Blister packed for easy displaying 911
15-5835 $35.95 15-5831 $28.95
EXHAUST
TIRES &
WHEELS
CONTROL
56-6062 56-6064
SEATS & CYCLE COUNTRY ™
DRIVE
1- 2 - 3... textured finish, silver powder-coated with durable clear coat
finish and rich nickel finish
Description P/N Retail
Black Powder-Coated with Tough Textured Finish 56-6062 $49.99
Silver Powder-Coated with Durable Clear Coat Finish 56-6063 59.99
BRAKE Rich Nickel Finish 56-6064 69.99
SUSPENSION
1. Set in Place
ELECTRICAL
CHEMICAL
SECURITY &
TIEDOWNS 2. Set Rear Straps 3. Strap in Bike
TRAILER &
Or... simply place EZ Chock against the front
STANDS of the truck bed and strap in the bike.
The non-slip rubber pad on the bottom plate
ensures the chock stays put!
TOOLS ANCHORTRAX
KURYAKYN® EZ CHOCK PAYLOAD SECURING DEVICE
• Perfect choice for securing your ATV, motorcycle, or cargo in
SHOP • Allows the use of the same chock in the truck, trailer or toy your truck bed or trailer
SUPPLIES hauler without additional mounting hardware • Adjustable tracks make them ideal for a variety of loads
• A chock that goes where your bike goes not the other way • Easy to install: Drilling 2 small holes on each actually
around strengthens the bed
DISPLAY • It’s patented plate and tab strapping design secures your bike • 12” kit contains 2 - 12” tracks, 2 heavy-duty anchors and
& PROMO in place without the traditional mounting hardware that all mount hardware
other chocks require • 72” kit contains 2 - 72” tracks, 4 heavy-duty anchors and
CROSS • Available in 3 different sizes mount hardware
REFERENCE Description P/N Retail Description P/N Retail
3-1/2” (Mfg/N 929) 49-6812 $89.99 12” Cargo Kit 21-0783 $41.50
5-1/2” (Mfg/N 935) 49-6813 99.99 72” Cargo Kit 21-0785 164.99
912 6-1/2” (Mfg/N 936) 49-6814 99.99 Sliding Loops 21-0784 12.50 ea.
PINGEL® CONTROL
REMOVABLE WHEEL CHOCK
• Features quick and easy installation and removal, ideal for
wood floor SEATS &
• Removable chock is made of thick-wall steel tube construction GRAPHICS
with a show chrome finish PINGEL®
• Complete with mounting hardware REMOVABLE WHEEL CHOCK
• Mounting hardware remains fastened to floor, chock easily • Chock designed for corrugated floor BODY
removes from hardware when not in use • Complete with mounting plate
• Made in the USA Description P/N Retail
Description P/N Retail 3-1/2” Inside Width 03-0527 $115.99
3-1/2” Inside Width 03-0513 $68.99 6-1/2” Inside Width 03-0534 115.99 PIT BIKE
6-1/2” Inside Width 03-0532 68.99 Mounting Plate - Fits 3-1/2” or 6-1/2 wheel chocks 03-0533 60.99
Extra Mounting Hardware (Pair)
Fits all sizes 03-0515 $26.99
ENGINE
49-8628
PINGEL ®
DRIVE
PERMANENT MOUNT
WHEEL CHOCK
• Bolts directly to the floor of any Track Not Included BRAKE
truck, van or trailer
• Features lustrous chrome-plated,
heavy-duty, thick wall steel construction PINGEL®
• Includes mounting bolts, nuts and washers SERIES E TRACK WHEEL CHOCK SYSTEM SUSPENSION
• Made in the USA • Allows you to locate your motorcycle anywhere along
Description P/N Retail the track for best position
Fits tire widths up to 3-1/2” 03-0572 $43.99 • Multiple motorcycles can now be quickly and easily installed
Fits tire widths from 5-3/4” to 6-1/2” 03-0574 43.99 in your trailer with optimum space utilization ELECTRICAL
• With Series E Track already in place, there is no further
hardware to install
• Installation is easy: 2 clips and a pull of a strap and your CHEMICAL
chock is secured
• Installs securely in both recessed and floor mounted
Series E Tracks
• Features a heavy-duty thick wall steel construction plated SECURITY &
TIEDOWNS
with a lustrous chrome finish, durable aluminum mounting
plate and quality fasteners
• Patent pending TRAILER &
• Wheel chock only, track not included STANDS
ANCRA TRACKSTAR ™
Description P/N Retail
WHEEL CHOCK Fits Tire Widths up to 3-1/2” Recess Mount
Fits Tire Widths up to 6-1/2” Recess Mount
49-8628
49-8629
$158.99
158.99
• Patented lock n’ load system using TOOLS
high strength aircraft style track provides Fits Tire Widths up to 3-1/2” Floor Mount 49-8630 158.99
positive attachment to your bike hauler Fits Tire Widths up to 6-1/2” Floor Mount 49-8631 158.99
• Designed to fit front tires 3.5” to 5.5” wide Track
5 ft. E Track, Black Powder-Coated 49-8838 $22.95 SHOP
• Reinforced, powder-coated tubular steel, solid base plate SUPPLIES
• Designed to fit standard truck beds and flat floor trailers
• To install, position chock stud feet into track, press down and
slide chock forward DISPLAY
• To remove, pull up on the top mounted “plunger” and slide & PROMO
chock out of the track. No tools required
• Additional mounting kit can be ordered separately enabling
you to use wheel chock in more than one vehicle/trailer CROSS
10-0882 $88.95 REFERENCE
Additional Mounting Kit
10-0894 $15.99 913
SEATS &
GRAPHICS
BODY
77-5617
PIT BIKE
ELECTRICAL
CHEMICAL
SECURITY &
TIEDOWNS
TRAILER &
STANDS
EXHAUST
34-2205
TIRES &
WHEELS
CONTROL
DRIVE
Unfolded
BRAKE
MSR®
FOLDING RAMP MSRHP SPACE SAVER
• Constructed of 6061-T6 aluminum SUSPENSION
• Rated for 500 lb max load FOLDING RAMP
• Not for ATV or street bike use • Space saving, folds in half
• 7’ long when open, folds to 42” and 4” thick • Louvers allow for better traction
• Sold to dealers in 3-pack only, retail priced • High quality aircraft aluminum ELECTRICAL
individually • Lightweight, only 18 lbs
34-2153 $126.95 ea. • Heavy-duty steel hinge
• Rubber coating on both steel tongues
CHEMICAL
• Tongue pin helps keep ramp in place on tailgate
• Handy carry handle and secure latch
• Load capacity, 400 lbs maximum
34-2185 $74.95 SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
SHOP
SUPPLIES
DISPLAY
PRAIRIE VIEW INDUSTRIES & PROMO
LOADING RAMP ALUMINUM MOTORCYCLE RAMP
• Made from top-quality aluminum • Excellent for loading in truck
• Motorcycle ramp is 12” wide by 8 ft. long unfolded, • 600 lb. load capacity CROSS
or 53” folded • Measures 5’ 9” x 6” REFERENCE
• 1,000 lb. load capacity • Ships UPS (not oversized)
15-0901 $209.95 59-0027 $53.95 915
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BODY QUADBOSS
ATV/UTV BI-FOLD RAMPS
• High value, all-purpose bi-fold ramp
PIT BIKE • Featherlite but tough as nails
• 5” rung spacing
• Aircraft aluminum construction
• Soft, black plastic holding finger covers to protects truck bed
ENGINE • 1250 lb. capacity
• SECURITY STRAPS INCLUDED AND ARE REQUIRED
WHEN USING PRODUCT
Capacity
FUEL & AIR
ATV Bi-Fold Ramp Dimensions (lbs.) P/N Retail
44”W x 71”L Pallet of 10 1,250 40-3476 $139.95 ea.
48”W x 71”L Pallet of 10 1,250 40-3477 191.99 ea.
DRIVE 46”W x 81”L Pallet of 10 1,250 40-3478 268.99 ea.
Mix-N-Match Pallet 1,250 40-34811
UTV Bi-Fold Ramp Dimensions
BRAKE 12”W x 89”L UTV Arch Pallet of 10 2,500 40-3491 $395.99 ea.
1
10-15 ramps from above sizes and adjustable (40-3479). Must fill out SO form.
SUSPENSION
QUADBOSS ATV
ADJUSTABLE RAMPS
• High value, all-purpose adjustable ramp
• Featherlite but tough as nails
ELECTRICAL • 5” rung spacing
• Aircraft aluminum construction
• Tiedowns included (attached to ramps)
CHEMICAL
• Soft, black plastic holding finger covers to protect truck bed
• 1,250 lb. capacity
• 42-52” x 76” open
• 14” x 76” x 5.5” folded
SECURITY &
TIEDOWNS
• SECURITY STRAPS INCLUDED AND ARE REQUIRED WHEN
USING PRODUCT
Adjustable Capacity
TRAILER & Ramp Dimensions (lbs.) P/N Retail
STANDS 42-52”W x 76”L Pallet of 10 1,250 40-3479 $198.99 ea.
TOOLS
SHOP
SUPPLIES QUADBOSS
ATV DISPLAY/WORK STAND
• Great for displaying or working on any ATV
DISPLAY • 2,000 lb. total capacity
& PROMO • Adjustable height (max. 24” deck) and width (54” to 60”)
• Plastic tips protect floor
CROSS • Loading ramps not included, may be ordered separately
REFERENCE • Ships UPS
56-0061 $451.52
916
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
56-0053 56-0052 56-0055 GRAPHICS
BODY
PIT BIKE
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BODY
ELECTRICAL
CHEMICAL
SECURITY &
TIEDOWNS
TRAILER &
STANDS
59-0050
TOOLS
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
56-0070 BODY
SUSPENSION
ELECTRICAL
CROSS
REFERENCE
56-0305
919
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BODY
PIT BIKE
RISK RACING™ RISK RACING™
RR-1 MINI RIDE ON LIFT HOLESHOT PRACTICE GATE
• The RR-1 Mini has all the great features as the full size RR-1 • Most races are won and lost at the drop of the gate, so
ENGINE packed into a smaller design for Race Minis perfecting your starting technique is key to any MX racer who
• Now kids can lift their own bike onto a stand wants to be on the podium
• Great for Moto Moms and Dads who are tired of heaving • New instant drop feature allows a trainer to bypass the
FUEL & AIR their child’s bike onto a crate random timing sequence and drop the gate instantly when
• Works with popular mini race bikes such as the KTM 65, the button is pressed
KX 65, KTM Senior 50, Cobra 65, pit bikes, etc. (not smaller • Improve your reaction time and learn to control power out of
bikes such as stock XR50s or PW50s) the gate and into the first corner
DRIVE • Works best on bikes which have a wheel base between • The “Holeshot” is an electronic, wireless, random timed,
38” - 46” and a ground clearance between 10” - 12.5”. practice starting gate
Check your bike’s stock specifications • Allows riders to independently practice their starts
BRAKE • The RR-1 Mini works with 50-65cc Motocross specific bikes • When rider presses the wireless remote button mounted on
• Sold to dealers in 2 pack only, retail priced their crossbar pad, it will activate a computer controlled
individually timing sequence which will drop the gate randomly
77-8291 $149.00 ea • Watch the glowing L.E.D., when it starts blinking it is like the
SUSPENSION 30 second board turning sideways
• The gate will drop randomly between 1-5 seconds
• Resetting the gate is as easy as riding by and stepping on the
ELECTRICAL backside of the hoop without dismounting
• Multiple gates can be electronically linked for multi-racer
practice
77-8293 $279.00
CHEMICAL
SECURITY &
TIEDOWNS
RISK RACING™
RR-1 LIFT
• Ride on lift – Easy up – Easy down – Stable with both tires
TRAILER & off of the ground
STANDS • Works with any motocross specific bike, 85cc and up
• Made of high grade, powder-coated steel and aluminum
diamond plate
TOOLS • Less than 25 lbs. – Easy to take to and from track
• Lockable in the up or down position
• Sold to dealers in 2 pack only, retail priced
SHOP individually
SUPPLIES • Drop ship only
77-8290 $149.00 ea
DISPLAY
& PROMO
CROSS
REFERENCE
920
EXHAUST
TIRES &
WHEELS
CONTROL
34-2199 34-2200
34-2198
SEATS &
GRAPHICS
BODY
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
MSRHP
TRI-STAND STEEL SHOP
• 3 different axle pin sizes to fit
SUPPLIES
most dirt bikes
MSRHP TRI-MOTO STAND • Axle pins are 3” long, stays in
• Lightweight replacement for O.E.M. triangle stands axle better than O.E.M. Tri-Stands DISPLAY
• Tapered axle pins keep stand from falling out of axle • Allen wrench included for axle pin bolt & PROMO
• 3 tapered axle pins accommodate most axle sizes • Arched base enables stability on uneven ground
• Frame designed from 1" round aluminum tubing • Constructed of high quality steel
• Arched lower frame for stability on uneven ground • Silver zinc coat finish CROSS
• Custom blister packaging for an attractive display REFERENCE
• Made from high quality aircraft aluminum
• Available in silver anodized finish • Packaging includes a reinforced eyelet for hanging
34-2184 $24.95 34-2206 $16.95 921
EXHAUST
34-2207
TIRES &
WHEELS
MSRHP/RHINO
BODY MOTORCYCLE STANDS
• Lightest stand on the market
• Center lifting design 34-2191 34-2190
• 2” height adjustment. (5mm hex key)
PIT BIKE
• Highest load rating. (500 lbs) MSRHP FOLDING STAND II
• Self lubricating plastic bushings • Most compact stand available
• Stainless steel pivot pins • Folds flat to only 4” thick
ENGINE • Replacement parts in stock • Measures 17” tall when erected
• 1-year manufacturer’s warranty • Made of high quality aircraft aluminum
Description P/N Retail • Surface plates on legs to keep from sinking in soft soil
Black 34-2207 $119.95 • Heavy-duty aluminum top with a large oil drain hole
FUEL & AIR Black/Red 34-2208 119.95 • Extra thick, oil and gas resistant top rubber pad
• Recessed rivets won't break off
• Handy bottom tool tray that folds with stand
DRIVE • Available in silver anodize or 3 hard coat factory colors
• Accommodates 1 or 2 X-Tool Trays for parts and tool storage
Description P/N Retail
BRAKE Silver 34-2187 $89.95
34-2192 34-2193 Black 34-2188 89.95
Red 34-2189 89.95
Blue 34-2190 89.95
SUSPENSION MSR X-Tool Tray
Silver 34-2181 $15.95
ELECTRICAL
34-2194 34-2195
CHEMICAL
34-2191
SECURITY &
TIEDOWNS
MSRHP
TRAILER & PODIUM STAND II 34-2192 34-2193
STANDS • Designed for extreme durability
• Made of high quality aircraft aluminum
• Frame constructed from 1" round tubing
TOOLS • Arched frame for stability on uneven ground
• Decal panels allow access to the tool tray and bike's oil drain bolt
• Removable bottom tool tray with secure clips
SHOP
• Heavy-duty aluminum top with a large oil drain hole
SUPPLIES • Extra thick, oil and gas resistant top rubber pad
• Recessed rivets won't break off MSRHP
• Measures 17” tall
DISPLAY • Available in silver anodize or 6 hard coat factory colors STARTING BLOCKS
Description P/N Retail • Step block risers for youth
& PROMO
Silver 34-2191 $82.95 motocrossers at the starting gate
Black 34-2192 82.95 • Blocks adjust from 3" tall thru 9" tall
CROSS Red 34-2193 82.95 • Cheese grade surface works for cleaning mud off boot bottoms
REFERENCE Blue 34-2194 82.95 • Blocks are stackable with a single carry handle
Green 34-2195 82.95 • Made from high quality aircraft aluminum
922 Orange 34-2196 82.95 • Available in silver anodized finish
Yellow 34-2197 82.95 34-2183 $52.95
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BODY
PIT BIKE
FMF
STEP-UP BIKE STAND
• Lightweight cast aluminum platform that ENGINE
MSR® MINI STAND MSR® STAND won’t flex or bend
• No more bending over to • Sturdy aluminum construction • The rubber topped platform is adjustable
work on small bikes • Non-slip rubber top • Extends from 12.5” to 16” so it’s great
• Perfect for kids or pit bike • Stable footprint won’t sink into soft dirt for mini’s or the big 4-strokes FUEL & AIR
34-7906 $97.95 34-2180 $79.95 • Takes about 5 minutes to assemble and
can be taken apart if needed
27-3863 $84.95 DRIVE
BRAKE
SUSPENSION
ELECTRICAL
CHEMICAL
TOOLS
27-3887
SHOP
SUPPLIES
05-7186
FMF PODIUM STAND
• Lightweight anodized aluminum DISPLAY
construction & PROMO
• Available in minibike and big bike sizes
BBR STANDS
• Aluminum BIKE CRATE • 4 pack also available
CROSS
• Heavy-duty plastic construction Description P/N Retail REFERENCE
Description P/N Retail
• High enough to support all bikes Stand (Single) 27-3887 $79.95
13” Stand 05-7318 $64.95
• Great for carrying oil etc. Stand (4 pk) 27-3888 79.95
16” Stand 05-7186 69.95
34-1035 $22.99 Mini (Single) 27-3889 79.95 923
EXHAUST
TIRES &
WHEELS
CONTROL
SUSPENSION
ELECTRICAL
CHEMICAL
SECURITY &
TIEDOWNS
BODY
HARDLINE MOTOSLIDE
HIGH ROLLER 360 WHEEL DOLLY
BIKE STAND • Slides bike into any tight space PIT BIKE
• Most advanced motorcycle stand on the • Works great for storage
market providing easy relocation of the • Use on any motorcycle
bike while on the stand • Roll on-and-off
• Quick foot pedal operation • Low profile - will not tip over ENGINE
of heavy-duty castor base allows • Corrosion resistant
the bike to be lifted and rolled to a desired location • Sold individually
• Durable chrome moly steel construction with corrosion resistant 21-6082 $77.95 FUEL & AIR
powder-coated finish
• Solid injection molded rubber top with High Roller logos to
ensure constant grip of the bike
• Maximum weight limit 350 lbs. DRIVE
• Patent pending
10-0052 $149.95
BRAKE
BikeMaster® SUSPENSION
UNIVERSAL REAR STAND STS STRAPLESS
• Universal rear stand fits most double-sided
swingarm applications TRANSPORT STAND
• Folding design for compact storage REAR STANDS ELECTRICAL
• Comes with aluminum sliding adjustable The Strapless Transport Stand works by way of a stainless steel
distance Spool Type lift points rod inserted into the hollow rear axle of most modern motorcycles.
• 4 rubber bumbers between tubes and The steel rod is then captured in the Strapless Transport Stand CHEMICAL
floor, allow for easy pick up using slide locks, allowing the bike to ride on its own suspension.
• Powder-coated paint for long-lasting good looks The Strapless Transport Stand is removable in seconds, using 2
• Extra reinforcement hoop at handle end for strength over other mounting plates that bolt to the floor, just slide the stand into place
open hoop designs and engage the locking mechanism. SECURITY &
• Extra strength wheels • Stand is removable TIEDOWNS
15-1571 $99.95 • No tie-downs, no wheel chocks
• No stress on suspension parts TRAILER &
• 100% rigid mounting STANDS
• Allows for bikes to be placed closer to walls or other bikes
• Easy loading and unloading
59-9920 $200.00
BikeMaster® Axle Bar Kits
TOOLS
UNIVERSAL ROLL-ON STAND HONDA Year P/N Retail
• Universal roll-on stand fits CR125/CR250 2-Stroke & SuperMoto 01-06 59-9915 $49.00
all motorcycles CRF250R/CRF450R Dirt & SuperMoto All 59-9915 49.00 SHOP
SUPPLIES
• Tipping point design
insures that the weight KAWASAKI
of the bike holds it firmly KX125/KX250 2-Stroke Dirt & SuperMoto 02-07 59-9915 $49.00 DISPLAY
between the vertical stop KX250F/KX450F Dirt & SuperMoto All 59-9915 49.00 & PROMO
• Adjustable for both height
and wheel diameter SUZUKI
• Durable and lightweight steel design RM125/RM250 2-Stroke SuperMoto 04-08 59-9915 $49.00 CROSS
• Powder-coated paint for long lasting good looks RM-Z250/RM-Z450 SuperMoto All 59-9915 49.00 REFERENCE
• Dismantles for compact storage
YAMAHA 925
• Perfect for track or shop use
YZ250F/YZ450F Dirt & SuperMoto 01-08 59-9926 $59.00
15-1573 $149.95
EXHAUST
ENGINE
13” 13-1/2”
DRIVE
3-1/2”
BRAKE
K&L MC455
SUSPENSION FAT JACK & MC464 FAT JACK DOLLY
• Everything you like about the MC450 and more
• Fat Jack’s wider deck with rubber non-skid pad increases your 4”
ELECTRICAL lifting area for increased stability
• The MC464 Fat Jack Dolly is for shops that already own the
MC455
• It’s sturdy casters allow you to move bikes easily, with the
CHEMICAL stability you need
• UPS shippable
NOTE: Do not use air/impact guns to raise and lower the
SECURITY & MC455
TIEDOWNS Minimum Height: 3-1/2”, Maximum Height: 13”
Dimensions: 16”(405mm) Length x 10”(255mm) Width
Maximum Height: 13”(330mm). Base Width: 14”(355mm)
TRAILER & Description P/N Retail
STANDS
K&L MC455 Fat Jack 29-3075 $310.99
K&L MC464 Fat Jack Dolly 29-3076 122.99 29-3075 and 29-3076
TOOLS
SHOP
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
926