Sie sind auf Seite 1von 6

(1) Syllabus/Mathematical Science Syllabus/Mathematical Science (2)

under :
SYLLABUS
Session Paper Number of Marks Duration
MATHEMATICAL SCIENCE Questions
Note : 60 out of which
First I 50 questions are 50%2=100 1¼ Hours
There are Three Papers for each of the subjects. Paper-I on to be attempted
Teaching and Research aptitude, Paper -II and Paper-III
50 questions all
based on the syllabus of concerned subjects. Details are First II ofwhich are 50%2=100 1¼ Hours
furnished below : compulsory
75 questions all
PAPER -I
Second III of which are 75%2=150 2½ Hours
Subject : General Paper on Teaching & Research Aptitude compulsory

The test is intended to assess the teaching/research aptitude of 2. The candidates are required to obtain minimum
the candidate. They are supposed to possess and exhibit cognitive marks separately in Paper-II and Paper -III as given below
abilities like comprehension, analysis, evaluation, understanding
the structure of arguments, evaluating and distinguishing Minimum marks (%) to be obtained
deductive and inductive reasoning, weighing the evidence with Category Paper-I Paper-II Paper-III
special reference to analogical arguments and inductive General 40 (40%) 40 (40%) 75 (50%)
generalization, evaluating, classification and definition, avoiding
logical inconsistency arising out of failure to see logical relevance OBC 35 (35%) 35 (35%) 67.5 (45%) rounded
due to ambiguity and vagueness in language. The candidates are off to 68
also supposed to have a general acquaintance with the nature of PH/VH/ 35 (35%) 35 (35%) 60 (40%)
a concept, meaning and criteria of truth, and the source of SC/ST
knowledge. Only such candidates who obtain the minimum
There will be 60 questions, out of which the candidates can required marks in each Paper, separately, as mentioned above,
attempt any 50. In the event of the candidate attempting more will be considered for final preparation of result.
than 50 questions, the first 50 questions attempted by the However, the final qualifying criteria for eligibil-
candidate will only be evaluated.
ity for Lectureship shall be decided by Steering Committee
1. The Test will be conducted in objective mode from before declaring of result.
SET 2012 onwards. The Test will consist of three papers. All
3. The syllabus of Paper-I, Paper-II and Paper-III will
the three papers will consists of only objective type questions
remain the same.
and will be held on the day of Test in two separate sessions as
(3) Syllabus/Mathematical Science Syllabus/Mathematical Science (4)

tions of bounded variation, elements of metric spaces.


MATHEMATICAL SCIENCE
6. Complex Analysis-Riemann Sphere and Stereographic projection.
SECTION - B Lines, Circles crossratio. Mobius transformations, Analytic func-
tions, Cauchy-Riemann equations, line integrals, Cauchy’s theo-
PAPER-II rem, Morera’s theorem, Liouville’s theorem, integral formula, zero-
sets of analytic functions, exponential, sine and cosine functions,
General Information : Units 1, 2, 3 and 4 are compulsory for all candi- Power series representation, Classification of singularities, Con-
dates. Candidates with Mathematics background my omit units 10 -14 formal Mapping.
and units 17, 18. Candidates with Statistics background may omit units
6, 7 and 9. Adequate alternatives would be given for candidates with O. 7. Algebra-Group, subgroups, Normal subgroups, Quotient Groups,
R. background. Homomorphisms, Cyclic Groups, Permutation Groups, Cayley’s
Theorem, Rings, Ideals, integral Domains, Fields, Polynomial
1. Basic concepts of Real and Complex analysis-sequences and se- Rings.
ries, continuity, uniform continuity, Differentiability, Mean Value
Theorem, sequences and series of functions, uniform convergence, 8. Linear-Algebra-Vector spaces, subspaces, quotient spaces, Linear
Riemann integral-definition and simple properties. Algebra of Com- independence, Bases, Dimension. The algebra of linear Transfor-
plex numbers, Analytic functions, Cauchy’s Theorem and integral mations, kernel, range, isomorphism, Matrix Representation of a
formula, Power series, Taylor’s and Laurent’s series, Residues, linear transformation, change of bases, Linear functionals, dual
contour integration. space, projection, determinant function, eigen values and eigen
vectors, Cayley-Hamittion Theorem, invarient Sub-spaces, Canoni-
2. Basic Concepts of Linear Algebra-Space of n-vectors, Linear de- cal Forms; diagonal form, Triangular form, Jordan form, inner prod-
pendence, Basic, Linear transformation, Algebra of matrices, Rank uct spaces.
of a matrix, Determinants, Linear equations, Quadratic forms,
Characteristic roots and vectors. 9. Differential Equations-First order ODE, singular solutions, initial
value Problems of First Order ODE, General theory of homog-
3. Basic concepts of probability-Sample space, discrete probability, enous and non-homogeneous Linear ODE, Variation of Parameters,
simple theorem on probability, independence of events, Bayes Lagrange’s and Charpit’s methods of solving First order Partel Dif-
Theorem. Discrete and continuous random variables, Binomial, ferential Equations. PDE’s of higher order with constant coeffi-
Poisson and Normal distributions; Expectation and moments, in- cients.
dependence of random variables, Chebyshev’s inequality.
10. Data Analysis Basic Concepts-Graphical representation, measures
4. Linear Programming Basic Concepts-Convex sets, Linear Program- of central tendency and dispersion. Bivariate data, correlation and
ming Problem (LPP). Examples of LPP. Huperplane, Open and regression, Least squares-polynomial regression, Application of
closed half-spaces. Feasible, basic feasible and optimal solutions. normal distribution.
Extreme point and graphical method.
11. Probability - Axiomatic definition of probability. Random variables
5. Real Analysis-finite, countable and uncountable sets, Bounded and and distribution functions (univeriate and multivariate); expecta-
unbounded sets, Archimedean property, ordered field, complete- tion and moments; independent events and independent random
ness of R, Extended real number system, lumsup and limit of a variables; Bayes’ theorem; marginal and conditional distribution
sequence, the epsilon-delta definition of continuity and conver- in the multivariate case, coveriance matrix and correlation coeffi-
gence, the algebra of continuous functions, monotonic functions, cients (product moment, partial and multiple), regression.
types of discontinuities, Infinite limits and limits at infinity, func-
(5) Syllabus/Mathematical Science Syllabus/Mathematical Science (6)

Moment generating functions; characteristic functions; probabil- formance measures. Steady state solution of Markovian queueing
ity inequalities (Tchebyshef, Markov, Jenson). Convergence in models : M/M/1, M/M/1 with limited waiting space M/M/C,
probability and in distribution; weak law of large numbers and M/M/C with limited waiting space.
central limit theorem for independent identically distributed ran-
16. Linear Programming - Linear Programming. Simplex method,
dom variables with finite variance.
Duality in linear programming. Transformation and assignment
12. Probability Distribution-Berhount, Binomial, Multinomial, problems. Two person-zero sum games. Equivalence of rectangu-
Hypergeomatric, Poisson, Geometric and Negative binomial dis- lar game and linear programming.
tribution, Uniform, exponential, Cauchy, Beta, Gamma, and nor-
17. Finite Population : Sampling Techniques and Estimation : Simple
mal (univariate and multivariate) distributions Transformations of
random sampling with and without replacement. Stratified sam-
random variables; sampling distributions, t, F and chi-square dis-
pling; allocation problem; systematic sampling. Two stage sam-
tributions as sampling distributions, Standard errors and large
pling. Related estimation problems in the above cases.
sample distributions. Distribution of order statistics and range.
18. Design of Experiments : Basic principles of experimental design.
13. Theory of Statistics : Methods of estimation : maximum likeli-
Randomisation structure and analysis of completely randomised,
hood method, method of moments, minimum chi-square method,
randomised blocks and Latinsquare designs. Factorial experiments.
least-squares method. Unblasedness, efficiency, consistency.
Analysis of 2n factorial experiments in randomised blocks.
Cramer-Rao linequality. Sufficient Stastics. Rao-Blackwell Theo-
rem. Uniformly minimum variance unblased estimators. Estima-
tion by confidence intervals. Tests of hypothesis : Simple and com- PAPER-III
posite hypotheses, two types of errors, critical region, randomized
test, power function, most powerful and unifirmly most powerful 1. Real Analysis : Riemann integrable functions; Improper integrals,
tests, Likelihood-ratio tests. Wald’s sequential probability ratio test. their convergence and uniform convergence. Euclidean space R’’,
Bolzano-Welerstrass theorem, compact Subsets of R’’, Heine-Borel
14. Stastical methods and Data Anlysis- Tests for mean and variance theorem, Fourier series.
in the normal distribution : one-population and two-population
cases; related confidence intervals. Tests for product moment, par- Continuity of functions of R’’, Differentiability of F:R’’>Rm, Prop-
tial and multiple correlation coefficients; comparison of k linear erties of differential, partial and directional derivatives, continu-
regressions. Fitting polynomial regression; related test. Analysis ously differentiable functions. Taylor’s series. Inverse function
of discrete data : chi-square test of goodness of fit, contingency theorem, implict function theorem.
tables. Analysis of varience : one-way and two-way classification Integral functions, line and surface integrants, Green’s theorem,
(equal number of observations per cell). Large-sample tests through Stoke’s theorem.
normal approximation.
2. Complex Analysis : Cauchy’s theorem for convex regions, Power
Nonparametric tests : sign test, median test, Mann-Whitney test, series representation of Analysis function. Liouville’s theorem,
Wilcoxom test for one and two-samples, rank correlation and test Fundamental theorem of algebra, Riemann’s theorem on remov-
of independence. able singularaties, maximum modulus principle, Schwarz lemma,
15. Operational Research Modelling - Definition and scope of Opera- Open Mapping theorem, Casoratti-Welerstrass-theorem,
tional Research. Different types of models. Replacement models Welerstrass’s theorem on uniform convergence on compact sets,
and sequencing theory, inventory problems and their analytical Bilinear transformations, Multivalued Analytic Functions, Rimann
structure. Simple deterministic of queueing system, different per- Surfaces.
(7) Syllabus/Mathematical Science Syllabus/Mathematical Science (8)

3. Algebra : Symmetric groups, alternating groups, Simple groups, 9. Ordinary and Partial Differential Equations : Existence and Unique-
Rings, Maximal ideals, Prime Ideals, Integral domains, Euclidean ness of solution dyxdx-f(x,y) Green’s function, sturm Liouville
domains, principal Ideal domains, Unique Factorisation domains, Boundary Value Problems, Cauchy Problems and Characteristics,
quotient fields, Finite fields, Algebra of Linear Transformations, Classification of Second Order PDE, Seperation of Variables for
Reduction of matrices to Canonical Forms, Inner product Spaces, heat equation, wave equation and Laplace equation, Special func-
Orthogonality, quadratic Forms, Reduction of quadration forms. tions.
Reduction of Quadritic forms.
10. Number Theory : Divisibility : Linear diophantine equations.
4. Advance Analysis : Element of Metric Spaces Convergence, con- Congruences. Quadratic residues; Sums of two squares, Arithmatic
tinuity, compactness, Connectedness, Weierstrass’s approximation functions Mu, Tau, Phi and Sigma (and).
Theorem, Completeness, Bare category theorem, Labesgue mea-
11. Mechanics : Generalised coordinates; Lagranges equation;
sure, Labesgue integral, Differentiation and Integration.
Hamilton’s coronics equations; Variational principles least action;
5. Advanced Algebra : Conjugate elements and class equations of Two dimensional motion of rigid bodies; Euler’s dynamical equa-
finite groups, Sylow theorem, solvable groups, Jordan Holder Theo- tions for the motion of rigid body; Motion of a rigid body about an
rem Direct Products, Structure Theorem for finita abellean groups, axis; Motion about revolving axes.
Chain conditions on Rings; Characteristic of Field, Field exten-
12. Elasticity : Analysis of strain and stress, strain and stress tensors;
sions, Elements of Galois theory, solvability by Radicals, Ruler
Geomatrical representation; Compatibility conditions; Strain en-
and compass construction.
ergy function; Constitutive relations; Elastic solids Hookes law;
6. Functional Analysis : Banach Spaces, Hahn-Banch Theorem, Open Saint-Venant’s principle, Equations of equilibrium; Plane problems-
mapping and closed Graph Theorems. Principle of Uniform Airy’s stress function, vibrations of elastic, cylindrical and spheri-
boundedness, Boundedness and continuity of Linear Transforma- cal media.
tions. Dual Space, Embedding in the second dual, Hilbert Spaces,
13. Fluid Mechanics : Equation of continuity in fluid motion; Euler’s
Projections. Orthonormal Basis, Riesz-representation theorem,
equations of motion for perfect fluids; Two dimensional motion
Bessel’s Inequality, persaval’s Identity, self adjoined operators,
complex potential; Motion of sphere in perfect liquid and motion
Normal Operators.
of liquid past a sphere; vorticity; Navier-Stokes’s equations for
7. Topology : Elements of Topological Spaces, Continuity, Conver- viscous flows-some exatct solutions.
gence, Homeomorphism, Compactness, Connectedness, Separa-
14. Differential Geometry : Space curves - their curvature and tor-
tion Axioms, First and Second Countability, Separability, Sub-
sion; Serret Frehat Formula; Fundamental theorem of space curves;
spaces, Product Spaces, quotient spaces, Subspaces, Product
Curves on surfaces; First and second fundamental form; Gaussian
Spaces, quotient spaces. Tychonoff’s Theorem, Urysohn’s
curvatures; Principal directions and principal curvatures;
Metrization theorem, Homotopy and Fundamental Group.
Goedesics, Fundamental equations of surface theory.
8. Discrete Mathematics : Partially ordered sets, Latices, Complete
15. Calculus of Variations : Linear functionals, minimal functional
Latices, Distributive latices, Complements, Boolean Algebra, Bool-
theorem, general variation of a functional, Euler - Larange equa-
ean Expressions, Application to switching circuits, Elements of
tion; Variational methods of boundary value problems in ordinary
Graph Theory, Eulerian and Hamiltonian graphs, planar Graphs,
and partial differential equations.
Directed Graphs, Trees, Permutations and Combinations, Pigeon-
hole principle, principle of Inclusion and Exclusion, Derangements. 16. Linear integral Equations : Linear integral Equations of the first
and second kind of Fredholm and Volterra type; soluting by suc-
(9) Syllabus/Mathematical Science Syllabus/Mathematical Science (10)

cessive substitutions and successive approximations; Solution of continuous distribution functions, Convolutions, marginal and con-
equations with seperable kernels; The Fredholm Alternative; ditional distributions of bivariate discrete and continuous distribu-
Holbert-Schmidt theory for symmetric kernels. tions.
17. Numerical analysis : Finite differences, interpolation; Numerical Relations between characteristic functions and moments: Moment
solution of algebric equation; Iteration; Newton-Rephson method; inequalities of Holder and Minkowski.
Solutions on linear system; Direct method; Gauss elimination
23. Statistical inference and Decision Theory : Statistical Decision
method; Matrix-Inversion, elgenvalue problems; Numerical dif-
problem; non-randomized, mixed and randomized decision rules;
ferentiation and integration. Numerical solution of ordinary dif-
risk function, admissibility, Bayes’ rules, minimax rules, least
ferential equation, iteration method, Picard’s method, Euler’s
favourable distributions, complete class and minimal complete
method and improved Euler’s method.
class. Decision problem for finite perameter space. Convex loss
18. Integral Transformal place transform : Transform of elementary function. Role of sufficiency.
functions, Transform of Derivatives, Inverse Transform, Convolu-
Families of distributions with monotone likelihood property, ex-
tion Theorem, Application, Ordinary and Partial differential equa-
ponential family of distributions. Test of simple hypothesis against
tions; Fourier transforms; sine and cosine transform, Inverse Fou-
a simple alternative from decision, theoretic viewpoint. Tests with
rier Transform, Application to ordinary and partial differential equa-
Neyman structure. Uniformly most powerful unbiased tests. Lo-
tions.
cally most powerful tests, inference on location and scale param-
19. Mathematical Programming Revised simplex method. Dual sim- eters; estimation and tests. Equivariant estimators, invarience in
plex method, Sensitivity analysis and perametric linear program- hypothesis testing.
ming. Kuhn-Tucker conditions of optimality. Quadratic program-
24. Large sample statistical methods : Various modes of convergence.
ming; methods due to Beale, Wofle and Vandepanne, Duality in
Op and op, CLT, Sheffe’s theorem, Polya’s theorem and Slutsky’s
quadratic programming, self duality, Integer programming.
theorem, Transformation and varience stabilizing formula. asymp-
20. Measure Theory : Measurable and measure species; Extension of totic distribution of function of sample moments, Sample quantiles,
measure, signed measure, Jordan-Hahn decomposition theorems. Order statistics and their functions, Tests on correlations, coeffi-
Integration, monotone convergence theorem, Fatou’s lemma, domi- cients of variation, skewness and kurtosis, Pearson Chi-square,
nated convergence theorem. Absolute continuity. Radon contingency Chi-square and childhood ratio statistics, U-statistics,
Niiodymtheorem, Product measures, Fubinl’s theorem. Consistency of Tests, Asymptotic relative efficiency.
21. Probability : Sequences of events and random variables; Zero-one 25. Multivariate statistical Analysis : Singular and non-singular multi-
laws of Borel and Kolmogorov. Almost sur convergence, conver- variate distributions. Characteristics functions Multivariate nor-
gence in mean square, Khintchine’s weak law of large numbers; mal distribution; marginal and conditional distribution, distribu-
Kologorov’s inequality, strong law of large numbers. Convergence tion of linear forms, and quadratic forms, Cochran’s theorem.
of series of random variables, three-series criterion. Central limit
inference on parameters of multivariate normal distributions; one
theorems of Liapounov and Lindeberg-Feller. Conditional expec-
population and two-population cases. Wishart distribution, Han-
tation, martingales.
dlings T2, Mahalenobils D2, Discrimina-Analysis, Principal com-
22. Distribution Theory : Properties of distribution functions and char- ponents, Canonical correlations, Cluster analysis.
acteristic functions; continuity theorem, inversion formula, Rep-
26. Linear Models and Regression : Standard Gauss Markov models;
resentation of distribution function as a mixture of discrete and
Estimability of parameters; best linear, unbised estimates (Bell..);
(11) Syllabus/Mathematical Science Syllabus/Mathematical Science (12)

Method of least squares and Gauss-Markov theorem; Variance- 32. Industrial Statistics : Control charts for variables and attributes;
coveriance matrix of BLUES. Test of linear hypothesis, One-way Acceptance sampling by attributes; single, double and sequential
and two-way classifications. Fixed, random and mixed effects sampling plans; OC and ASN functions, AOQL and ATI; Accep-
models (two-way classifications only); variance components, Bi- tance sampling by varieties. Tolerance limit. Reliability analysis :
variable and multiple linear regression; Poly-normal regression; Hazard function, distribution with DFR and IFR; Series and paral-
use of orthogonal poly-normals. Analysis of coveriance. Linear lel systems. Life testing experiments.
and nonlear regression, Outliers.
33. Inventory and Queueing theory : Inventory (S,s) policy, periodic
27. Sample Surveys : Sampling with varying probability of selection, review models with stochesitic demand. Dynamic inventory mod-
Hurwitz-Thompson estimator; PPS sampling; Double sampling. els. Probabilistics re-order point, lox size inventory system with
Cluster sampling. Non-sampling errors : Interpenetrating samples. and without lead time. Distribution free analysis. Solution of in-
Multiphase sampling. Ratio and regression methods of estimation. ventory problem with unknown density function. Warehousing
problem. Queues : Imbeded markov chain method to obtain steady
28. Design of Experiments : Factorial experiments, confounding and
state solution of M/G/1,G/M/1 and M/D/C, Network models. Ma-
fractional replication. Split and strip plot designs; Quasi-Latin
chine maintenance models. Design and control of queing systems.
square designs; Youden square. Design for study of response sur-
faces; first and second order designs. Incomplete block designs; 34. Dynamic Programming and Marketing : Nature of dynamic pro-
Balanced, connectedness and orthogonality, BIBD with recovery gramming, Determinstic processes, Non-sequential discrete
of inter-block information; PBIBD with 2 associate classes. Analysis optimisation-allocation problems, assortment problems. Sequen-
of series of experiments, estimation of residual effects. Construc- tial discrete optimisation long-term planning problems, multistage
tion of orthogonal-Latin squares, BIB designs and confounded fac- production processes. Functional approximations. Marketing sys-
torial designs. Optimality criteria for experimental designs. tems, application of dynamic programming to marketing problems.
Introduction of new product, objective in setting market price and
29. Time-Series Analysis : Discrete-parameter stochastic processes;
its policies, purchasing under fluctuating prices. Advertising and
strong and weak stationary; autocovariance and autocorrelation.
promotional decisions. Brands switching analysis, Distribution, de-
Moving average, autoregressive, autoregressive moving average
and autoregressive integrated moving average processes. Box- cisions.
Jenkins models. Estimation of the parameters in ARIMA models;
forecasting. Periodogram and correlogram analysis. ______
30. Stochastic Process : Markov chains with finite and countable state
space, classification of states, limiting behaviour of n-step transi-
tion probabilities, stationary distribution; branching processes;
Random walk; Gambler’s ruin. Markov processes in continuous
time; Poisson processes, birth and death processes, Wiener pro-
cess.
31. Demography and Vital Statistics : Measures of fertility and mor-
tality, period and Cohort measures. Life tables and its applications;
Methods of construction of abridged life tables. Application of
stable population theory to estimate vital rates. Population projec-
tions. Stochastic models of fertility and reproduction.

Das könnte Ihnen auch gefallen