Beruflich Dokumente
Kultur Dokumente
2 Electropneumatically
operated valves Series 3 and 4
Series 3: G1/8, 3/2 - way and 5/2 - way
Series 4: G1/8, G1/4 and G1/2
3/2, 5/2 and 5/3 - way
SOLENOID VALVES AND PNEUMATIC VALVES
GENERAL DATA
2.07 The company reserves the right to vary models and dimensions without notice.
001 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
PNEUMATIC DATA
Operating pressure max. press. 10 bar (for minimum pressures see descriptions)
Nominal pressure 6 bar
ELECTRICAL DATA
Voltage Standard AC: 24V, 50/60 Hz; 110V, 50/60 Hz; 220V, 50/60 Hz
Standard DC: 24V
Voltage tolerance AC ± 10% DC ± 10%
-15%
Duty cycle 100%, continuous operation
Class of insulation Class H
Connector mod. 122-800, mod. 124-800
Protection class IP54 DIN 40050 (IP65 with DIN 43650/PG9 connector)
Power consumption AC G1/8, G1/4, at inrush = 8.5 VA, during operation = 6.5 VA
G1/2, at inrush = 19 VA, during operation = 12 VA
DC G1/8, G1/4 - 5W; G1/2 - 10W
458-016-22-A77S
SERIES SPECIAL
3 S = Special to be specified
4
N° OF PORTS/POSITIONS
3 = 3/2
4 = 3/2 Series 3 (N.O.)
5 = 5/2
6 = 5/3 closed PORTS ** SOLENOID VOLTAGE
8 = G1/8 A70 G70 A80 G90
7 = 5/3 open
4 = G1/4 H= 24V 50/60Hz ■ - - -
2C = G1/2 K= 110V 50/60Hz ■ - - -
J = 220V 50/60Hz ■ - - -
7= 24V RC ■ - - -
** For other tensions please contact our technical dept.
ACTUATION
O11 = double solenoid (horizontal solenoids)
V11 = double solenoid (vertical solenoids) only G1/4
O15 = single solenoid, spring return (horizontal solenoids)
V15 = single solenoid, spring return (vertical solenoid) only G1/4
O16 = single solenoid, pneumatic spring return (horiz. solenoid) SOLENOID DIMENSIONS
V16 = single solenoid, pneumatic spring return (vertical solenoid) *6 = 32 x 32
only G1/4 7 = 22 x 22
8 = 30 x 30
SOLENOID INTERFACE
02 = mech. sol. 22 x 22 - series 3 SOLENOID MATERIAL
22 = mech. sol. 22 x 22 - series 4 A = PPS
* 50 = mech. sol. 32 x 32 - only G1/2 G = Nylon (caricato vetro)
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 002
3 4 S E R I E S Catalogue 2001
2
3/2 - way solenoid valve, G1/8, monostable Mod. 338... and Mod 348...
The Series 3, G1/8, 3/2-way solenoid valves, which have
electropneumatic actuation and spring return, are available
in the N.C. (closed) or N.O. (open) version.
The minimum operating pressure is 3.5 bar.
SOLENOID VALVES AND PNEUMATIC VALVES
Mod.
338-015-02-A70*
338L-015-02-A70*
Mod.
348-015-02-A70*
348L-015-02-A70*
* see voltage coding.
Mod.
338-011-02-A70*
338L-011-02-A70*
* see voltage coding.
Mod.
358-015-02-A70*
* see voltage coding.
2.07 The company reserves the right to vary models and dimensions without notice.
003 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
5/2 - way solenoid valve, G1/8, bistable Mod. 358...
The Series 3, G1/8 5/2-way solenoid valves,
which have electropneumatic actuation and spring return,
are suitable for operating double-acting cylinders.
The minimum operating pressure is 2.5 bar.
Mod.
358-011-02-A70*
* see voltage coding.
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 004
3 4 S E R I E S Catalogue 2001
2
5/2 - way solenoid valves, G1/8, monostable Mod. 458...
The Series 4, G1/8, 5/2 - way solenoid valves,
which have electropneumatic actuation and return,
are suitable for operating double - acting cylinders.
The minimum operating pressure is 2.5 bar.
SOLENOID VALVES AND PNEUMATIC VALVES
2.07 The company reserves the right to vary models and dimensions without notice.
005 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 006
3 4 S E R I E S Catalogue 2001
2
3/2 - way solenoid valve, G1/4, bistable Mod. 434...
The Series 4, G1/4, 3/2 - way solenoid valves,
which have electropneumatic actuation and return,
assume the N.C. (closed) or N.O. (open)
position depending on the last pulse received.
SOLENOID VALVES AND PNEUMATIC VALVES
2.07 The company reserves the right to vary models and dimensions without notice.
007 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
5/2 - way solenoid valve, G1/4, bistable Mod. 454...
The Series 4, G1/4, 5/2-way solenoid valves,
which have electropneumatic actuation and return,
are suitable for operating double - acting cylinders.
The minimum operating pressure is 2 bar.
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 008
3 4 S E R I E S Catalogue 2001
2
5/2 - way solenoid valve, G1/4, bistable Mod. 454...
The Series 4, G1/4, 5/2 - way solenoid valves,
which have electropneumatic actuation and return,
are suitable for operating double - acting cylinders.
The minimum operating pressure is 2 bar.
SOLENOID VALVES AND PNEUMATIC VALVES
5/3 - way solenoid valve, G1/4 Mod. 464... and Mod. 474...
The Series 4, G1/4, closed or open centre, 5/3 - way solenoid
valves, with monostable electropneumatic actuation and return
and a central stable position, are suitable for operating
double - acting cylinders when intermediate positions of short
or medium duration are required or when the two chambers
of a cylinder must be discharged.
The minimum operating pressure is 3 bar.
These solenoid valves are equipped
with a manual over ride for stable operation.
Connector Mod. 122-800 or 124-800.
2.07 The company reserves the right to vary models and dimensions without notice.
009 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
5/2 - way solenoid valve, G1/4, monostable Mod. 452...
The Series 4, G1/4, 5/2-way solenoid valves,
which have electropneumatic actuation
and spring or pneumatic spring return are suitable
for operating double - acting cylinders.
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 010
3 4 S E R I E S Catalogue 2001
2
Manifold bars with separate exhausts (low version)
For Series 3 and 4 valves, G1/8 and G1/4.
DIMENSIONS
Mod. V A B C D øE F G R L1 L2 L3 L4 L5 L6
CNV-318-2 2 73 56 44 5 7 178 83 G1/4 63 97 115 99 20 23
CNV-318-3 3 73 56 44 5 7 178 83 G1/4 86 120 138 119 20 23
CNV-318-4 4 73 56 44 5 7 178 83 G1/4 109 143 161 142 20 23
CNV-318-5 5 73 56 44 5 7 178 83 G1/4 132 166 184 165 20 23
CNV-318-6 6 73 56 44 5 7 178 83 G1/4 155 189 207 188 20 23
CNV-418-2 2 73 56 44 5 7 189 83 G1/4 73 107 125 106 20 33
CNV-418-3 3 73 56 44 5 7 189 83 G1/4 106 140 158 139 20 33
CNV-418-4 4 73 56 44 5 7 189 83 G1/4 139 173 191 172 20 33
CNV-418-5 5 73 56 44 5 7 189 83 G1/4 172 206 224 205 20 33
CNV-418-6 6 73 56 44 5 7 189 83 G1/4 205 239 257 238 20 33
CNV-414-2 2 95 56 44 5 7 221 110 G3/8 86 128 148 120 25 36
CNV-414-3 3 95 56 44 5 7 221 110 G3/8 122 164 184 156 25 36
CNV-414-4 4 95 56 44 5 7 221 110 G3/8 158 200 220 192 25 36
CNV-414-5 5 95 56 44 5 7 221 110 G3/8 194 236 256 228 25 36
CNV-414-6 6 95 56 44 5 7 221 110 G3/8 230 272 292 264 25 36
V= number of valves
2.07 The company reserves the right to vary models and dimensions without notice.
011 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
Manifold bars with separate exhausts (high version)
For Series 3 and 4 valves, G1/8 and G1/4.
DIMENSIONS
Mod. V A B C D øE F G R L1 L2 L3 L4 L5 L6
CNV-328-2 2 118 56 44 5 7 223 128 G1/4 63 97 115 99 20 23
CNV-328-3 3 118 56 44 5 7 223 128 G1/4 86 120 138 119 20 23
CNV-328-4 4 118 56 44 5 7 223 128 G1/4 109 143 161 142 20 23
CNV-328-5 5 118 56 44 5 7 223 128 G1/4 132 166 184 165 20 23
CNV-328-6 6 118 56 44 5 7 223 128 G1/4 155 189 207 188 20 23
CNV-428-2 2 118 56 44 5 7 234 128 G1/4 73 107 125 106 20 33
CNV-428-3 3 118 56 44 5 7 234 128 G1/4 106 140 158 139 20 33
CNV-428-4 4 118 56 44 5 7 234 128 G1/4 139 173 191 172 20 33
CNV-428-5 5 118 56 44 5 7 234 128 G1/4 172 206 224 205 20 33
CNV-428-6 6 118 56 44 5 7 234 128 G1/4 205 239 257 238 20 33
CNV-424-2 2 133 56 44 5 7 259 148 G3/8 86 128 148 120 25 36
CNV-424-3 3 133 56 44 5 7 259 148 G3/8 122 164 184 156 25 36
CNV-424-4 4 133 56 44 5 7 259 148 G3/8 158 200 220 192 25 36
CNV-424-5 5 133 56 44 5 7 259 148 G3/8 194 236 256 228 25 36
CNV-424-6 6 133 56 44 5 7 259 148 G3/8 230 272 292 264 25 36
V= number of valves
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 012
3 4 S E R I E S Catalogue 2001
2
Manifold blocks with common exhausts for Series 3 and 4 valves, G1/8
These blocks can be used to assemble up to 6 Series 3 or 4 valves (3/2 - way or 5/2 - way).
Each block is equipped with two sealing rings complete with guide bush andfixing screws.
SOLENOID VALVES AND PNEUMATIC VALVES
DIMENSIONS
Mod. A B C D E F G H L1 L2 M N
CNVL-32 23 23 69.5 46 12 29 23.5 78 69 57 4.3 14
CNVL-33 23 23 69.5 46 12 29 23.5 78 92 80 4.3 14
CNVL-34 23 23 69.5 46 12 29 23.5 78 115 103 4.3 14
CNVL-35 23 23 69.5 46 12 29 23.5 78 138 126 4.3 14
CNVL-36 23 23 69.5 46 12 29 23.5 78 161 149 4.3 14
DIMENSIONS
Mod. A B C D E F G H L1 L2 M N
CNVL-42 28 33 69.5 46 12 29 23.5 78 89 77 4.3 14
CNVL-43 28 33 69.5 46 12 29 23.5 78 122 110 4.3 14
CNVL-44 28 33 69.5 46 12 29 23.5 78 155 143 4.3 14
CNVL-45 28 33 69.5 46 12 29 23.5 78 188 176 4.3 14
CNVL-46 28 33 69.5 46 12 29 23.5 78 221 209 4.3 14
2.07 The company reserves the right to vary models and dimensions without notice.
013 These products are designed for industrial applications and are not suitable for sale to the general public.
Catalogue 2001 S E R I E S 3 4
2
Manifold base with common exhausts
For valves Series 4, G1/4 (3/2, 5/2 or 5/3 - ways).
Mod.
CNVL/1 Series 3 - G1/8
CNVL/2 Series 4 - G1/8
CNVL/3 Series 4 - G1/4
Mod.
TCNVL/3 for G1/8
TCNVL/5 for G1/4
The company reserves the right to vary models and dimensions without notice. 2.07
These products are designed for industrial applications and are not suitable for sale to the general public. 014