Beruflich Dokumente
Kultur Dokumente
AMETEK integrated brushless motors/drive pagckage simplifies the installation and use of a brushless
motor. Interconnection cabling, set up, noise and compatibilty issues are all but eliminated with this
approach.
AMETEK integrated brushless motors are designed with a wide range of voltage inputs, power outputs,
optional control panel, gearboxes, and mounting configuration making these packages great candi-
dates for variable speed control applications. AMETEK controllers provide smooth, quiet and efficient
operation over a wide range of speeds.
Part/Model Number
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F1
____
Brushless DC Motors with Integrated Controller
3.0" x 4.18" (76mm x 106mm) Series
Part/Model Number
Current (A)
1500 Notes
6
1000 4 1 All values specified at 25°C ambient temperature and without heat sink.
2 Peak values are theoretical and supplied for reference only.
500 2
3 Recorded with max. winding temperature at 25°C ambient, mounted to a 5.0”x 5.0”x 0.25”
0 0 heat sink.
0 25 50 75 100 125 150
Torque (oz-in)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F2
____
Brushless DC Motors with Integrated Controller
3.0" x 4.5" (76mm x 115mm) Series
Part/Model Number
4000
Current (A)
20
• Gearboxes (consult factory)
3000 15 Notes
2000 10
1 All values specified at 25°C ambient temperature and without heat sink.
1000 5 2 Peak values are theoretical and supplied for reference only.
3 Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50”
0 0 heat sink.
0 25 50 75 100 125 150
Torque (oz-in)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F3
____
Brushless DC Motors with Integrated Controller
3.0" x 4.8" (76mm x 123mm) Series
Part/Model Number
Complimentary Products
Current (A)
3000 12
2500 10 • Gearboxes (consult factory) • Brakes • 28 VDC Input
2000 7
1500 6 Notes
1000 4 1 All values specified at 25°C ambient temperature and without heat sink.
500 2 2 Peak values are theoretical and supplied for reference only.
0 0 3 Recorded with max. winding temperature at 25°C ambient, mounted to a 12.0”x 12.0”x 0.50”
0 20 40 60 80
Torque (oz-in)
heat sink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F4
____
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34132, 32 Series
32 mm
82.6 mm 1.25 inch 157 mm
3.25 inch 6.18 inch
73.03 mm
2.875 inch
12.7 mm
0.5 inch
5.54 mm
0.218 inch
98.43 mm
3.875 inch
Part/Model Number
9 0.24 • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection • TENV and IP50 construction
8 0.21
7 0.19 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output
6 0.16
Torque (lb-in)
5 0.13
4 0.11
3 Torque (lb-in) 0.08
Power (HP)
Complimentary Products
2 0.05
1 0.03
• Gearboxes (consult factory) • Brakes • Cables
0 0.00
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Speed (KRPM)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F5
____
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34232, 32 Series
32 mm
82.6 mm 1.25 inch 157 mm
3.25 inch 6.18 inch
73.03 mm
2.875 inch
12.7 mm
0.5 inch
5.54 mm
0.218 inch
98.43 mm
3.875 inch
Part/Model Number
9 0.24 • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection • TENV and IP50 construction
8 0.21
7 0.19 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output
6 0.16
Torque (lb-in)
5 0.13
4 0.11
3 Torque (lb-in) 0.08
Power (HP)
Complimentary Products
2 0.05
1 0.03
• Gearboxes (consult factory) • Brakes • Cables
0 0.00
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6
Speed (KRPM)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F6
____
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34134, 34 Series
32 mm
82.6 mm 1.25 inch 183 mm
3.25 inch 7.18 inch
73.03 mm
2.875 inch
12.7 mm
0.5 inch
5.54 mm
0.218 inch
98.43 mm
3.875 inch
Part/Model Number
14 0.40 • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection • TENV and IP50 construction
12 0.34
• Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output
10 0.29
• External fault reset
Torque (lb-in)
Power (HP)
8 0.23
6 0.17
Torque (lb-in) Complimentary Products
4 0.11
Power (HP)
2 0.06
• Gearboxes (consult factory) • Brakes • Cables
0 0.00
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Speed (KRPM)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F7
____
Brushless DC Motors with Integrated Controller
MA34000 Series
MA34236, 36 Series
32 mm
82.6 mm 1.25 inch 263.4 mm
3.25 inch 10.37 inch
73.03 mm
2.875 inch
12.7 mm
0.5 inch
5.54 mm
0.218 inch
98.43 mm
3.875 inch
Part/Model Number
20 1.10 • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection • TENV and IP50 construction
18 0.99
16 0.88 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output
14 0.77 • External fault reset
Torque (lb-in)
Power (HP)
12 0.66
10 0.55
8 0.44
6 Torque (lb-in) 0.33 Complimentary Products
4 Power (HP) 0.22
2 0.11 • Gearboxes (consult factory) • Brakes • Cables
0 0.00
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Speed (KRPM)
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F8
____
Brushless DC Motors with Integrated Controller
3.87" x 6.0" (98mm x 152mm) Series
Part/Model Number
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F9
____
Brushless DC Motors with Integrated Controller
3.87" x 6.68" (98mm x 170mm) Series
Part/Model Number
3000 3.0
2500 2.5 • Brakes (consult factory)
2000 2.0
1500 1.5 Notes
Speed
1000 Current 1.0 1 All values specified at 25°C ambient temperature and without heat sink.
500 0.5 2 Peak values are theoretical and supplied for reference only.
0 0 3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
0 20 40 60 80
Torque (oz-in)
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F 10
____
Brushless DC Motors with Integrated Controller
5.25" x 6.76" (133mm x 172mm) Series
Part/Model Number
3000 Current 12
2500 10 • NEMA 56 Mounting
2000 8
1500 6 Notes
1000 4 1 All values specified at 25°C ambient temperature and without heat sink.
500 2 2 Peak values are theoretical and supplied for reference only.
0 0 3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
0 25 50 75 100 125
Torque (oz-in)
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F 11
____
Brushless DC Motors with Integrated Controller
5.25" x 8.78" (133mm x 223mm) Series
Part/Model Number
1000 10
Notes
500 5 1 All values specified at 25°C ambient temperature and without heat sink.
2 Peak values are theoretical and supplied for reference only.
0 0 3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
0 100 200 300 400
Torque (oz-in)
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F 12
____
Brushless DC Motors with Integrated Controller
5.25" x 10.15" (133mm x 256mm) Series
Part/Model Number
1500 30
Speed
1000 Current 20
Notes
500 10 1 All values specified at 25°C ambient temperature and without heat sink.
2 Peak values are theoretical and supplied for reference only.
0 0 3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
0 200 400 600 800 1000
Torque (oz-in)
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK products are not designed for and should not be used in medical life support applications. AMETEK reserves the right to
revise its products without notification. The above characteristics represent standard products. For product designed to meet specific applications, contact AMETEK Technical & Industrial Products Sales department.
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 215-256-6601 - Europe: +44 (0) 845 366 9664 - Asia: +86 21 5763 1258
www.ametektip.com F 13
____