Beruflich Dokumente
Kultur Dokumente
2 Extra item
B ADD TAXES
i MOBILIZATION ADVANCE
Any other
Bill Summary
Err:509
Err:509
Err:509
Err:509
Err:509
Err:509
Err:509
-5,282
Err:509
Err:509
Err:509
PROJECT-: SWEET WATER VILLA (TYPE-B-56) AT R9 SECTOR, IN AMANORA PARK TOWN, HADAPSAR, PUNE.
0.00 0.00
1 Excavation in Black cotton soil which can be removed
by bucket, including clearing vegetation, shoring, bailing out
or pumping out ground water, preparing the bed for
foundation, carting away surplus excavated earth to areas of
Cu m 50.00 100.00 0.00 0.00
disposal out-side Township premises at all cost and
2 Excavation
responsibilityin ofallcontractor.
types shadoo Place forsoil which excavated
dumping can be
removed
material to be arrange by contractor at his own risk shoring,
by bucket, including clearing vegetation, & cost. Cu m Rate Only 150.00 0.00
bailing
This rate outisorfor pumping out ground, water,
massin excavation preparing
footings, the bed
lifts &approved
STP etc
3 Providing and filling plinth or wherever required
for foundation,
complete carting away
including surplusspace
working excavated and earthnecessary
to areas
material free from organic materials available inside
of disposal Out-Side
arrangement Township premises ofat ramps all cost after
and
Amanora town for ship ramps
premises&in removing
layers not exceeding 150mm Cu.m. 1307.00 190.00 85.900 85.900
responsibility
completion of of contractor.
work. Disposal
For shoring,
depths up toby spreading
0.00 to 3.00,tom leveling
( For
(Compacted),
4 Providing including
and filling watering, leveling grades
and compacting
Disposal of excavatedwith in plinth ormechanical
approved
earth
wherever required
within compaction
the corporation
approved
as per
as specified,
material free compacting
from organic with mechanical
materials vibrators
procured from aslimits as
per the
outside
the instruction of Engineer-in-charge.
directed by Engineer-in-charge, This
the Royalty rate
& Octroiis for mass
charges
instructions
Amanora town of ship
Engineer-in-charge,
premises to not
obtain 95% Modified
excavation
shall be paid , by
footings,
CCL) lifts &in STP
layers exceeding
etc complete 150mm
including 0.000
Proctor’s
(Compacted), density test etc. complete as specified and as
4.1 working
Lead spaceincluding
Distance forand shoring,
necessary
Procurred watering,
0.00 toleveling
arrangement
material 5.00 forkmto
rampsgrades& Cu m Rate Only 650.00 0.000
directed.
as specified, compacting with mechanical vibrators as per the
removing of ramps after completion
4.2 Lead Distance Procurred material 5.00 to 10.00 km of work. Cu m Rate Only 680.00 0.000
instructions of Engineer-in-charge, to obtain 95% Modified
4.3 Lead Distance Procurred material 10.00 to 15.00 km Cu m Rate Only 710.00 0.000
Proctor’s density test etc complete as specified and as
5 Providing and laying compacted 230 mm thick dry trap
directed.
rubble soling with approved material available Inside Cu m Rate Only 700.00 0.000
Amanora township premises, including hand setting vertically
6 Providing and laying compacted 230 mm thick dry trap
in regular lines filling the interstices with stone chips (40 to
rubble soling with approved material procured from Cu m 52.00 1200.00 46.57 46.570
65 mm stone) with murum, compacting, watering, ramming
outside Amanora township premises, including hand setting 0.000
as per instructions by Engineer-in-charge etc complete with
vertically
TOTAL in regularIlines
SECTION C/Ofilling
TO the interstices with stone chips
SUMMARY - 0.000
all labour and material and all risk & responsibility of
(40 to 65 mm stone) with murum, compacting, watering,
contractor. etc all complete. (consolidated depth shall be - 0.000
ramming as per instruction from Engineer-in-charge etc
measured for payment)
complete with all labour and material and all risk &
responsibility of contractor. etc all complete. (consolidated
UILdepth shall be measured for payment) Page 3 of 334 CCL
PROJECT-: SWEET WATER VILLA (TYPE-B-56) AT R9 SECTOR, IN AMANORA PARK TOWN, HADAPSAR, PUNE.
0.00 0.00
16321.00 16321.00
55884.00 55884.00
0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
1770186.43 1770186.43
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 80871.16 80871.16
234846.60 234846.60
0.00 0.00
0.00 0.00
5751.80 5751.80
0.00 0.00
0.00 0.00
0.00 0.00
- 4932152 4932152
column above
footing to P.L.
S.No. Footing No. Plinth top TOP PCC TOP Lvl.
Sr. No. Description Unit Up to date Pre paid This bill Remark
Quantity Quantity Quantity
Backfill
1 backfilling below grade slab Cum 21.57 0.000 21.570
below basement backfiling & CUM 73.43 73.430
2 compaction 0.000
UIL 17 CCL
Filling Plot No 55
UIL 18 CCL
Location: Concrete for Footings (M-30) (internal Basement area)
Quantity
Sr. No. Description Length width Thickness No. Remarks
cum
Providing & laying M 30
design mix concrete by
using Mixer / Batching
plant, for all RCC work
(without plaster) like
1 C2
footing, Raft, Tie beams,
0.975 0.705 0.275 1 0.189
2 C3
stub columns, columns, 0.785 2.200 0.300 1 0.518
3 Walls,
C4 floor Beams, 3.173 1.000 0.400 1 1.269
staircases, Retaining
4 C5
Walls, shear walls, Paradi, 3.173 1.000 0.400 1 1.269
5 C6
chajja, Lintels, 0.760 2.100 0.300 1 0.479
6 slabs,Sloping
C7 Slabs, 0.910 0.400 1 0.892
2.450
parapet wall, LMR, above
7 C10
terrace elevation features, 0.900 0.685 0.250 1 0.154
8 UGWT, OHWT or other
C11 0.885 2.550 0.350 1 0.790
tanks, Drop panels,
9 C12
copings, fins, arches or
0.910 2.450 0.400 1 0.892
10 C13
wherever required using 0.910 2.200 0.375 1 0.751
11 machine
C13A crushed metal of 0.935 2.250 0.400 1 0.842
approved quality and
12 C14
grading, of required size 1.035 2.550 0.400 1 1.056
in required proportions,
approved crushed sand, Total= 9.100 Cum
fly ash for various
concrete works at all
lead & lift without
formwork, including
grinding for wherever
required for uneven
surfaces/ cement slurrys,
scaffolding, machine
mixing, weigh batching,
transporting, laying,
leveling, vibrating,
finishing, dewatering if
required, curing by
ponding or by spraying or
by wet gunny bags etc,
roughening of surface,
finishing rough broken
surfaces with 1:2 cement
mortar, as per drawings
and design etc. complete.
(excluding steel
reinforcement) with or
without plasticizer as per
design mix. (Cement shall
be supplied by client at
one point, Rate to be
quoted including cost of
Cement, which will be
recovered from RA bills,
Basic rate of Cement Rs.
260/Bag.).
SHAARP PERSICITUS FABTECH PVT. LTD.
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
Sr. No. Description Unit Up to date Pre paid This bill Remark
Quantity Quantity Quantity
35.44
SHAARP PERCITUS FABTECH PVT. LTD.
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
Remark
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55 CHECK
GRADE SLAB M-15
3 garage
11.1 5.2 0.1 1 5.772
DEDUCTION FOR 0.45 0.23 0.1 -6 -0.062
COLUMN C/S
BEAM 1.9 0.23 0.1 -1 -0.044
OWN,
SHAARP PERCITUS FABTECH PVT. LTD. check
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
Total=
Total=
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
Location: Raft (Internal Side of Retaining Wall)
Sr. No. Description Length width Thickness No.
1 As per Cad Drawing 107.462 1.00 0.2 1
Total=
0.363
0.310
0.104
0.099
0.534
0.198
0.819
0.252
0.819
0.252
0.483
0.189
0.897
0.294
0.270
0.247
0.091
0.084
0.820
0.268
0.897
0.294
0.772
0.248
0.857
0.270
1.125
0.306
0.331
0.331
2.818
2.035
1.828
2.294
2.681
1.969
1.153
1.256
1.696
2.340
0.732
0.896
0.425
0.732
0.896
0.425
36.998 Cum
LTD.
No- 55
Quantity Remarks
cum
0.189
0.518
1.269
1.269
0.479
0.892
0.154
0.790
0.892
0.751
0.842
1.056
9.100 Cum c
LTD.
No- 55
Quantity Remarks
cum
1.15
0.34
1.15
0.02
0.34
3.008 Cum
LTD.
No- 55
Quantity cum
Remarks
21.49
21.492 Cum
LTD.
No- 55
36.998
9.100
3.008
21.492
70.598
M-30 RCC Wall
MEASUREMENT SHEET
SHAARP PERCITUS FABTECH PVT. LTD. VILLA NO. 55
RA1
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
Depth or
Item Average
Item Description Nos Length (L) Height Quantity Remarks
No. width
D/H
6=(11)-
1 2 3 4 5 7 8
(10)-(9)
RCC Wall
1 South Side 1 x 1 18.380 0.230 4.500 19.023
5 DEDUCTION
UIL CCL 49
M-30 RCC Wall
MEASUREMENT SHEET
SHAARP PERCITUS FABTECH PVT. LTD. VILLA NO. 55
RA1
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
Depth or
Item Average
Item Description Nos Length (L) Height Quantity Remarks
No. width
D/H
UIL CCL 50
M-30 RCC Wall
Raft
PCC Top PL TOP
Depth
9 10 12
UIL CCL 51
M-30 RCC Wall
Raft
PCC Top PL TOP
Depth
UIL CCL 52
COLOUMN FOR FOOTING TO PLINTH L
MEASUREMENT SHEET
SHAARP PERCITUS FABTECH PVT. LTD. VILLA NO.55
Depth or
Item Average
Item Description Nos Length (L) Height Quantity
No. width
D/H
6=(11)-
1 2 3 4 5 7
(10)-(9)
UIL CCL 53
COLOUMN FOR FOOTING TO PLINTH L
MEASUREMENT SHEET
SHAARP PERCITUS FABTECH PVT. LTD. VILLA NO.55
Depth or
Item Average
Item Description Nos Length (L) Height Quantity
No. width
D/H
check
UIL CCL 54
COLOUMN FOR FOOTING TO PLINTH L
Plinth beam
Remarks Footing Depth PCC Top
bottom Level
8 9 10 11
UIL CCL 55
COLOUMN FOR FOOTING TO PLINTH L
Plinth beam
Remarks Footing Depth PCC Top
bottom Level
Cum
UIL CCL 56
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
BASEMENT SLAB /BEAM CONCRETE QTY
BEAMS
2 B7 4.9 0.6 0.23 1 0.676
3 B9 5.27 0.6 0.23 1 0.727
4 B13 1.995 0.425 0.23 1 0.195
5 B4 4.9 0.6 0.23 1 0.676
6 B3 5.27 0.6 0.23 1 0.727
7 B12 2.365 0.425 0.23 1 0.231
STAIRCASE
12 ST1 FLIGHT BTTM 2.3 1.3 0.2 1 0.598
RISER 1.3 1 0.0175 10 0.228
1ST LANDING BTTM, 1.35 1 0.2 1 0.270
LANDING 1.3 1.3 0.2 1 0.338
13 ST2 FLIGHT BTTM 1.5 1.53 0.2 1 0.459
RISER 1.3 1 0.0175 5 0.114
2 nd LANDING BTTM, 1.3 1 0.2 1 0.260
14 ST3 FLIGHT BTTM 2.8 1.3 0.2 1 0.728
RISER 1.3 1 0.0175 9 0.205
TOTAL
LTD. RA1
No- 55 check
TO 1ST SLAB CONCRTE
qty
4.306
0.807
1.346
1.172
3.381
0.845
1.071
1.014
0.671
2.857
TOTAL
BEAM 20.670
+
SLAB 45.080
TOTAL 1ST SLAB CONCRETE 65.750 CUM CHECKED
2365
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55 checked
concrete M30
Depth or
avg.Lengt Average Height Quantity
Item No. Item Description Nos h (L) width D/H Remarks
SQM
TOTAL
lintel lvl. Beams & slab 9.180
+
Roof lvl. Beams & slab SLAB 17.710
TOTAL GARAGE SLAB CONCRETE 26.890 cum CHECKED
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
COLOUMN CONCRET QTY ABOVE 1ST SLAB TO ROOF SLB TOP
Depth or
avg.Lengt Average Height Quantity
Item NoItem Description Nos h (L) width D/H
OP
Remarks
RA1
Item Depth or
Descriptio avg.Lengt Average Height Quantity
Item No. n Nos h (L) width D/H Remarks
TB C12-
13 & C19-
20 2 x 1 3.600 0.230 0.450 0.750
TB C13-
13A &
C20 -20A 2 x 1 1.625 0.230 0.450 0.340
TB1 C13A- 1 x 1 6.170 0.230 0.450 0.640
TB1
C20A-C21 1 x 1 4.640 0.230 0.450 0.480
TB1
C13A-C14 1 x 1 3.115 0.230 0.450 0.320
D CANTILEVER SLAB =
SLOPING LENGTH=1.5 m
1 C2 TO C7 FACE 1 x 1 19.68 1.500 0.15 4.430
2 C7 TO C14 FACE 1 X 1 6.63 1.500 0.15 1.490
3 C 14 CORNER FACE 1 X 1 1.38 1.500 0.15 0.310
4 C14 TO C21 FACE 1 X 1 4.87 1.500 0.15 1.100
5 C21 CORNER FACE 1 X 1 3.33 1.500 0.15 0.750
6 C21 T0 C27 FACE 1 X 1 7.03 1.500 0.15 1.580
7 C27 TO C23 FACE 1 X 1 17.78 1.500 0.15 4.000
8 C23 TO C18 FACE 1.500 0.000
A 1 X 1 5.73 1.500 0.15 1.290
B 1 X 1 1.30 1.500 0.15 0.290
9 C18 TO ROOF CAP 1 X 1 1.59 1.500 0.15 0.360
10 C11 CORNER 1 X 1 1.59 1.500 0.15 0.360
11 C10 TO C11 FACE 1 X 1 3.85 1.500 0.15 0.870
12 C2 TO C10 FACE 1 X 1 6.63 1.500 0.15 1.490
13 1 x 1 6.17 0.680 0.15 0.630
0.000
Depth or
avg.Lengt Average Height Quantity
Item No. Item Description Nos h (L) width D/H Remarks
UGWT
CONCRETE
1 RAFT 1 x 1 2.470 0.150 2.300 0.850
2 R.C.C. WALL 1 x 2 2.470 0.150 1.575 1.170
3 R.C.C. WALL 1 x 2 2.000 0.150 1.575 0.950
4 SLAB 1 x 1 2.170 0.125 2.300 0.620
5 CHAMPER 0.5 X 2 2.170 0.150 0.150 0.050
6 CHAMPER 0.5 X 2 2.000 0.150 0.150 0.050
CUT OUT
6 DEDUCTION -1 X 1 0.600 0.125 0.600 -0.050
Total quantity for this bill= 3.64 Cum
CHECKED
MEASUREMENT SHEET
81.269
17.036
4.440
415.940
61.600
72.123
37.730
3.290
125.470
165.300
46.490
443.930
64.470
125.170
180.710
27.550
621.250
35.070
2528.838
This bill Remark
Quantity
0.000
0.000
0.000
Location: Formwork for Footings (excluding internal Basement area)
Sr. No. Description Length width Thickness No. Quantity cum Remarks
Providing & fixing
Shuttering for footing,
Raft, Tie beams, stub
columns, columns, Walls,
floor Beams, staircases,
1 C2
Retaining Walls, shear walls, 1.700 0.475 1 0.808
Paradi, chajja, Lintels,
0.450 0.475 1 0.214
slabs,Sloping Slabs, UGWT or
other tanks, Drop panels etc. 0.435 0.475 1 0.207
all complete made from
marine plywood, wood, steel
1.950 0.475 1 0.926
plates, MS props, MS spans,
Frames etc or any other
approved material, including 0.300 0.275 1 0.083
centering of work, making all 0.300 0.275 1 0.083
lines & levels, at all heights
as per tender drawings for all
2 leads
C3 & lifts as per 0.485 0.500 2 0.485
architectural / structural
drawings & as per approval 2.200 0.500 1 1.100
of formwork system and 0.300 0.300 2 0.180
design from consultant and
3 C4
Engineer-in-charge, including 2.100 0.600 1 1.260
all tools & tackles, approved
shuttering oil for application
0.650 0.600 2 0.780
on surface, nails, fasteners 0.300 0.400 2 0.240
etc, including required
4 C5
scaffolding & deshuttering 2.100 0.600 1 1.260
etc complete. (Work shall be 0.650 0.600 2 0.780
for height upto all heights).
Density of all material shall 0.300 0.400 2 0.240
5 C6as per relevant IS code.
be 0.460 0.500 2 0.460
2.100 0.500 1 1.050
0.300 0.300 2 0.180
6 C7 0.610 0.600 2 0.732
2.450 0.600 1 1.470
0.300 0.400 2 0.240
7 C10 1.600 0.450 1 0.720
0.375 0.450 1 0.169
0.385 0.450 1 0.173
1.800 0.450 1 0.810
MEASUREMENT SHEET
RA1
Depth or
Item Average
Item Description Nos Length (L) Height Quantity Remarks
No. width
D/H
6=(11)-
1 2 3 4 5 7 8
(10)-(9)
Providing & fixing Shuttering for
footing, Raft, Tie beams, stub
columns, columns, Walls, floor
Beams, staircases, Retaining Walls,
RCC WallParadi,
shear walls, of Basement
chajja, Lintels,
slabs,Sloping Slabs, UGWT or other
1 South
tanks, SideDrop (Outer Face) etc. all
panels 1 x 1 18.380 4.500 82.710
complete made from marine
South
plywood, Sidewood,
(Innersteel
Face)plates, MS 1 x 1 17.922 4.325 77.513
props, MS spans, Frames etc or
2 East
any Sideother(Outer Face) material,
approved 1 x 1 5.730 4.500 25.785
including centering of work,
East
making Sideall(Inner
lines Face)
& levels, at all 1 x 1 5.270 4.325 22.793
heights as per tender drawings for
3 North Side
all leads (Outer
& lifts Face)
as per architectural 1 x 1 19.720 4.500 88.740
/ structural drawings & as per
North Side (Inner Face) 1 x 1 20.740 4.325 89.701
approval of formwork system and
4 design
West Sidefrom (Outerconsultant
Face) and
1 x 1 5.730 4.500 25.785
Engineer-in-charge, including all
tools
West Side & (Innertackles,
Face) approved 1 x 1 5.270 4.325 22.793
shuttering oil for application on
surface, nails, fasteners etc,
including required scaffolding &
5 deshuttering
ADDITION etc complete. (Work
shall be for height upto all
heights).
HVAC JAMBSDensity of all material
VERTICAL 2 X 6 1.230 0.230 3.395
shall be as per relevant IS code.
6 DEDUCTION
UIL CCL 91
Shutt. RCC Wall
MEASUREMENT SHEET
RA1
Depth or
Item Average
Item Description Nos Length (L) Height Quantity Remarks
No. width
D/H
UIL CCL 92
Shutt. RCC Wall
checked
Raft
PCC Top PL TOP
Depth
9 10 12
UIL CCL 93
Shutt. RCC Wall
checked
Raft
PCC Top PL TOP
Depth
UIL CCL 94
Shutt. Column
MEASUREMENT SHEET
Length Depth or
Item Description Nos Length (L) width (L)+ Height
width D/H
Item 6=(11)-
2 3 4 5 4+5
No. (10)-(9)
Column from footing to Plinth
1
beam bottom
UIL CCL 95
Shutt. Column
MEASUREMENT SHEET
Length Depth or
Item Description Nos Length (L) width (L)+ Height
width D/H
UIL CCL 96
Shutt. Column
EMENT SHEET
RA1
check
Quantity Remarks
7 8
5.512
3.718
3.884
3.835
4.390
4.744
2.951
3.155
3.901
3.685
2.924
2.924
2.829
2.924
2.856
2.842
UIL CCL 97
Shutt. Column
EMENT SHEET
RA1
check
Quantity Remarks
61.600 SQM
UIL CCL 98
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
BUNGLOW NO 55 PLINTH BEAM SHUTTERING
SHUTTERING
RA1 GARAGE AND CANOPY BEAMS
Sr. NO. Descripition length bredth depth nos qty
d
ke
other tanks, Drop panels etc.
ec
all complete made from
Ch
marine
Shutt. ofplywood,
Column wood,from steel
Grd
plates,
Slb topMS1stprops,
FloorMSFor spans,
-B-
Frames etc or any other
C2
55Bunglow 1 x 2 0.23
approved material, including 1 x 2
centering of work, making all
C3
lines & levels, at all heights as 1 x 2 0.23
per tender drawings for all 1 x 2
leads
C4 & lifts as per 1 x 2 0.23
architectural / structural
drawings & as per approval of 1 x 2
formwork system and design
C5 1 x 2 0.23
from consultant and Engineer-
in-charge, including all tools & 1 x 2
C6
tackles, approved shuttering 1 x 2 0.23
oil for application on surface, 1 x 2
nails, fasteners etc, including
C7
required scaffolding & 1 x 2 0.23
deshuttering etc complete. 1 x 2
(Work
C10 shall be for height upto 1 x 2 0.23
all heights). Density of all
material shall be as per 1 x 2
relevant IS code.
C11 1 x 2 0.23
1 x 2
C12 1 x 2 0.23
1 x 2
C13 1 x 2 0.23
1 x 2
C13A 1 x 2 0.23
1 x 2
C14 1 x 2 0.23
1 x 2
C18 1 x 2 0.23
1 x 2
C19 1 x 2 0.23
1 x 2
C20 1 x 2 0.23
1 x 2
C20A 1 x 2 0.23
1 x 2
C21 1 x 2 0.23
1 x 2
C23 1 x 2 0.23
1 x 2
C24 1 x 2 0.23
1 x 2
C25 1 x 2 0.23
1 x 2
C26 1 x 2 0.23
1 x 2
C27 1 x 2 0.23
1 x 2
d
ke
other tanks, Drop panels etc.
ec
all complete made from
Ch
marine ofplywood,
Shutt. Column wood,
from steel
Grd
plates,
Slb topMS1stprops,
FloorMSFor spans,
-B-
Frames etc or any other
1 C29,30,31,32,33,34
56Bunglow 6 x 2 0.23
approved material, including 6 x 2
centering of work, making all
2 canopy round column
lines & levels, 16,17 as
at all heights 2 x 2 3.14
per tender drawings for all
leads & lifts as per
architectural / structural
drawings & as per approval of
formwork system and design
from consultant and Engineer-
in-charge, including all tools &
tackles, approved shuttering
oil for application on surface,
nails, fasteners etc, including
required scaffolding &
deshuttering etc complete.
(Work shall be for height upto
all heights). Density of all
material shall be as per
relevant IS code.
VT. LTD
ST SLAB TOP RA1
3.90 1.794
0.45 3.90 3.510
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.45 3.90 3.510
3.90 1.794
0.75 3.90 5.850
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.60 3.90 4.680
3.90 1.794
0.75 3.90 5.850
4.90 2.254
1.04 4.90 10.192
4.90 2.254
0.60 4.90 5.880
4.90 2.254
0.60 4.90 5.880
4.90 2.254
0.60 4.90 5.880
4.90 2.254
0.75 4.90 7.350
4.90 2.254
0.95 4.90 9.310
4.90 2.254
0.45 4.90 4.410
4.90 2.254
0.45 4.90 4.410
4.90 2.254
0.60 4.90 5.880
4.90 2.254
0.60 4.90 5.880
4.60 12.696
0.45 4.60 24.840
0.15 4.75 8.953
Total quantity = 46.490 Sqm checked
SHAARP PERCITUS FABTECH PVT. LTD
SITE NAME-AMONORA,R9/10 SECTOR,BUNGLOW NO-55
FIRST SLAB SHUTTERING AREA
SR.NO DECRIPTION Length Bredth depth nos qty
Depth or
avg.Lengt Average Height Quantity
Item No. Item Description Nos h (L) width D/H
SQM
TOTAL 64.470
2 S13(SLOPING SLAB)
1 x 1.15 12.400 6.420 91.550
TOTAL = 125.170
checked
Remarks
sqm
sqm
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55 checked
coloumn shutering area above 1 st slab to ROOF SLAB
Depth or
Item Length Average Height Quantity
Item No. Description Nos (L) width D/H Remarks
Providing &
fixing
Sec-3/1 Shuttering
for footing,
Raft, Tie
beams, stub
columns,
columns,
C2
Walls, floor 1 x 2 0.23 4.20 1.932
Beams, 1 x 2 0.45 4.20 3.780
staircases,
C3 4.20
1 x 2 0.23 1.932
Retaining
Walls, shear 1 x 2 0.60 4.20 5.040
walls,
C4 Paradi, 1 x 2 0.23 4.20 1.932
chajja,
Lintels, 1 x 2 0.60 4.20 5.040
C5
slabs,Sloping 1 x 2 0.23 4.20 1.932
Slabs, UGWT 1 x 2 0.60 4.20 5.040
or other
C6
tanks, Drop 1 x 2 0.23 4.20 1.932
panels etc. all 1 x 2 0.60 4.20 5.040
complete
C7 1 x 2 0.23 4.20 1.932
made from
marine 1 x 2 0.60 4.20 5.040
plywood, 4.20
wood,
C10
steel 4.20
1 x 2 0.23 1.932
plates, MS
props, MS 1 x 2 0.45 4.20 3.780
spans,
C11 1 x 2 0.23 4.20 1.932
Frames etc or
any other 1 x 2 0.75 4.20 6.300
C12
approved 1 x 2 0.23 5.61 2.581
material, 1 x 2 0.60 5.61 6.732
including
C13
centering of 1 x 2 0.23 7.00 3.220
work, making 1 x 2 0.60 7.00 8.400
all
C13Alines & 1 x 2 0.23 6.50 2.990
levels, at all
heights as 1 x 2 0.60 6.50 7.800
per
C14 tender 1 x 2 0.23 4.38 2.015
drawings for 4.38
1 x 2 0.75 6.570
all leads &
lifts as per
architectural
C18 1 x 2 0.23 4.20 1.932
/ structural
drawings & 1 x 2 1.04 4.20 8.736
C19
as per 1 x 2 0.23 5.60 2.576
approval of 1 x 2 0.60 5.60 6.720
formwork
C20
system and 1 x 2 0.23 7.00 3.220
design from 1 x 2 0.60 7.00 8.400
consultant
C20A 1 x 2 0.23 6.50 2.990
and
Engineer-in-
charge,
including all
tools &
tackles,
1 x 2 0.60 6.50 7.800
C21 1 x 2 0.23 4.20 1.932
1 x 2 0.75 4.20 6.300
C23 1 x 2 0.23 4.20 1.932
1 x 2 0.95 4.20 7.980
C24 1 x 2 0.23 4.20 1.932
1 x 2 0.45 4.20 3.780
C25 1 x 2 0.23 4.20 1.932
1 x 2 0.45 4.20 3.780
C26 1 x 2 0.23 4.20 1.932
1 x 2 0.60 4.20 5.040
C27 1 x 2 0.23 4.20 1.932
1 x 2 0.60 4.20 5.040
beam beam
beam Beam side bttm.
SR NO DESCRIPTION NOS D/H
length width shutterin Shutterin
g g
TB C12-13 &
1 C19-20 2 x 2 3.600 0.230 0.450 6.480 1.66
TB C13-13A &
2 C20 -20A 2 x 2 1.625 0.230 0.450 2.930 0.75
3 TB1 C13A-C20A 1 x 2 6.170 0.230 0.450 5.550 1.42
4 TB1 C20A-C21 1 x 2 4.640 0.230 0.450 4.180 1.07
5 TB1 C13A-C14 1 x 2 3.115 0.230 0.450 2.800 0.72
C SLAB S2=165mm
D CANTILEVER SLAB =
SLOPING LENGTH=1.5 m
1 C2 TO C7 FACE 1 x 1 19.68 1.500
2 C7 TO C14 FACE 1 X 1 6.63 1.500
3 C 14 CORNER FACE 1 X 1 1.38 1.500
4 C14 TO C21 FACE 1 X 1 4.87 1.500
5 C21 CORNER FACE 1 X 1 3.33 1.500
6 C21 T0 C27 FACE 1 X 1 7.03 1.500
7 C27 TO C23 FACE 1 X 1 17.78 1.500
8 C23 TO C18 FACE 1.500
A 1 X 1 5.73 1.500
B 1 X 1 1.30 1.500
9 C18 TO ROOF CAP 1 X 1 1.59 1.500
10 C11 CORNER 1 X 1 1.59 1.270
11 C10 TO C11 FACE 1 X 1 3.85 1.500
12 C2 TO C10 FACE 1 X 1 6.63 1.500
BEAM
LENGTH
/area
from cad AVG.BEA
drg. BEAM WI M SIDE
B1 1 x 2 3.000 0.230 0.340
B2 1 x 2 4.830 0.230 0.790
B3 1 x 2 6.170 0.230 0.495
B4 1 x 2 6.170 0.230 0.475
B6 1 x 2 4.550 0.230 0.790
B7 1 x 2 6.170 0.230 0.790
B8 1 x 2 5.270 0.230 0.790
B9 1 x 2 5.270 0.230 0.790
B10 1 x 2 3.355 0.230 0.790
B11 1 x 2 2.300 0.230 0.790
B12 1 x 2 3.600 0.230 0.790
B13 1 x 2 1.995 0.230 0.790
B14 1 x 2 2.305 0.230 0.790
B15 1 x 2 2.335 0.230 0.790
B16 1 x 2 2.460 0.230 0.790
B17 1 x 2 3.080 0.230 0.458
B18 1 x 2 4.140 0.230 0.418
B18A 1 x 2 1.870 0.230 0.418
B19 1 x 2 3.580 0.230 0.418
B20 1 x 2 1.375 0.230 0.790
B21 1 x 2 0.770 0.230 0.340
B22 1 x 2 0.610 0.230 0.340
B23 1 x 2 0.770 0.230 0.340
B24 1 x 2 0.610 0.230 0.340
B26 1 x 2 2.340 0.230 0.713
B27 1 x 2 4.140 0.230 0.413
B27A 1 x 2 1.870 0.230 0.413
B28 1 x 2 5.190 0.230 0.713
B29 1 x 2 1.800 0.230 0.790
B30 1 x 2 3.355 0.230 0.790
B31 1 x 2 2.450 0.230 0.790
B31A 1 x 2 2.145 0.230 0.790
B32 1 x 2 4.420 0.230 0.790
B33 1 x 2 1.800 0.230 0.790
total for beam shuttering
GROSS TOTAL
SQM
SLAB 456.850
BEAM + 164.40
sqm
16.020
45.170
10.140
8.040
10.140
8.010
44.340
0.000
44.340
0.840
0.840
0.000
0.000
14.850
0.000
11.740
0.000
8.010
0.000
8.010
0.000
4.190
0.000
4.190
0.000
47.610
0.000
11.740
0.000
29.520
9.950
2.060
7.310
4.990
10.550
26.670
0.000
8.600
1.950
2.380
2.010
5.780
9.950
0.000
0.000
6.560
3.700
2.330
0.920
4.000
2.200
0.540
15.190
1.470
456.850 SQM
BEAM
SIDE
SHUTTE BEAM
RING BOTTOM
AREA IN AREA IN
sqm sqm
2.040 0.690
7.630 1.110
6.110 1.420
5.860 1.420
7.190 1.050
9.750 1.420
8.330 1.210
8.330 1.210
5.300 0.770
3.630 0.530
5.690 0.830
3.150 0.460
3.640 0.530
3.690 0.540
3.890 0.570
2.820 0.710
3.460 0.950
1.560 0.430
2.990 0.820
2.170 0.320
0.520 0.180
0.410 0.140
0.520 0.180
0.410 0.140
3.330 0.540
3.420 0.950
1.540 0.430
7.400 1.190
2.840 0.410
5.300 0.770
3.870 0.560
3.390 0.490
6.980 1.020
2.840 0.410
140.00 24.400
164.40 SQM
SHAARP PERCITUS FABTECH PVT. LTD.
UGWT SHUTTERING
Depth or
avg.Lengt Average Height Quantity
Item No. Item Description Nos h (L) width D/H Remarks
UGWT
SRNO.
SHUTTERING
RA1
OUTER VERTICAL SI
1 1 x 2 2.30 1.85 8.510
OUTER VERTICAL SI
2 1 x 2 2.47 1.85 9.140
INNER VERTICAL SI
3 1 x 2 2.00 1.58 6.300
INNER VERTICAL SI
4 1 x 2 2.17 1.58 6.840
SLAB
5 1 x 1 2.17 2.00 4.340
CUTOUT SIDE
7 1 x 4 0.60 0.13 0.300
CUTOUT
6 -1 x 1 0.60 0.60 -0.360
CHECKED
SHAARP PERSCITUS FABTECH PVT. LTD.
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
2.15+0.075
2.3+0.075
CHECKEd
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
Bunglow no-55 grade slab antitermite work.
156.970
61.601
218.571
CHECKED
Location:Crystalline Waterproofing of Footings (excluding Basement area)
Quantity
Sr. No. Description Length width Thickness No. Remarks
SQM
Crystalline waterproofing for
building area
Sides of Footing
1 C16 1.050 0.300 2 0.630
1.050 0.300 2 0.630
2 C17 1.050 0.300 2 0.630
1.050 0.300 2 0.630
3 C18 2.000 0.575 2 2.300
2.450 0.575 2 2.818
4 C19 1.850 0.500 2 1.850
2.200 0.500 2 2.200
5 C20 1.800 0.550 1 0.990
2.150 0.550 2 2.365
6 C20A 2.200 0.575 1 1.265
2.300 0.575 2 2.645
7 C21 1.950 0.550 2 2.145
2.500 0.550 2 2.750
8 C23 1.750 0.500 2 1.750
2.250 0.500 2 2.250
9 C24 1.550 0.425 2 1.318
1.750 0.425 2 1.488
10 C25 1.550 0.450 2 1.395
1.800 0.450 2 1.620
11 C26 1.700 0.475 2 1.615
2.100 0.475 2 1.995
12 C27 1.850 0.550 2 2.035
2.300 0.550 2 2.530
13 C29 1.35 0.35 2 0.945
1.55 0.35 2 1.085
0.000
14 C30 1.4 0.4 2 1.120
1.6 0.4 2 1.280
0.000
15 C31 1.05 0.3 2 0.630
1.35 0.3 2 0.810
C32 1.55 0.35 2 1.085
1.35 0.35 2 0.945
0.000
C33 1.4 0.4 2 1.120
1.6 0.4 2 1.280
0.000
C34 1.05 0.3 2 0.630
1.35 0.3 2 0.810
TOTAL 53.580 SQM
FOOTING
TOTAL A) SIDES 53.580
FOOTING
TOP &
B) BTTM. 103.390
156.970 Sqm
SHAARP PERSCITUS FABTECH PVT. LTD.
PROJECT:SWEET WATER VILLA NO (TYPE-B) AT R9 SECTOR, IN AMANORA PARK TOWN,
CLIENT: CITY CORPORATION LIMITED
COLLUM SHUTTERING FOOTING TO PLINTH BEAM VILLA NO - 55
Depth
Length or
Item Description Nos width Length (L)+ width
(L) Height
D/H
Item 6=(11)-
2 3 4 5 4+5
No. (10)-(9)
Column from
1 footing to Plinth
beam bottom
Quantity Remarks
Item DescriptionNos
7 8
2 3
2.842 C34 1x 1
61.601 SQM C
2/6/2016
Depth Plinth
Average or Remark Footing beam
Quantity PCC Top
width Height s Depth bottom
Length (L D/H Level
6=(11)-
5 7 8 9 10 11
4 (10)-(9)
MEASUREMENT SHEET
Final Bill
Depth or
Item Average
Item Description Nos Length (L) Height Quantity
No. width
D/H
6=(11)-
1 2 3 4 5 7
(10)-(9)
Crystalline waterproofing for
building area
Column from footing to Plinth
beam bottom
MEASUREMENT SHEET
Final Bill
Depth or
Item Average
Item Description Nos Length (L) Height Quantity
No. width
D/H
Plinth beam
Remarks Footing Depth PCC Top
bottom Level
8 9 10 11
Plinth beam
Remarks Footing Depth PCC Top
bottom Level
Sqm
5 COLUMN FROM FOOTING TO GRADE 1.100 0.000 0.769 2.001 0.000 0.000 0.000
SLAB TOP 3.870
0.740 0.596 0.494 0.731 0.000 0.023 0.000
6 PLINTH BEAM AND BASEMENT SLAB 2.584
7 GRADE SLAB 0.908 0.908
COLUMN FROM PLINTH BEAM TOP 1.088 0.000 0.439 1.302 0.000 0.000 0.000
8 TO ABOVE 1ST SLAB TOP 2.828
9 1ST SLAB BBS QTTY. 7.071 1.652 1.191 1.589 1.145 0.000 1.494 0.000
10 GARAGE SLABS AND BEAMS 2.764 0.677 1.396 0.113 0.297 0.000 0.281 0.000
11 COLUMN ABOVE 1ST SLAB TO ROOF 1.011 0.000 0.528 0.631 0.000 0.000 0.000
TOP 2.171
12 ROOF SLAB 10.164 2.669 4.514 1.299 0.572 0.000 0.848 0.263
44 UGWT 0.440 0.350 0.080 0.000 0.010 0.000 0.000 0.000
TOTAL WT IN MT 13.276 9.422 5.231 6.688 0.000 2.646 0.263
GRAND TOTAL MT 37.525
37.525
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : SHARP ENGG.
Name of Work : Plot No. 55, B- Type Bungalow
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
0.000 0.000
1.37
Name of the projects: AMANORA PARK TOWN sector R-9/10 Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : shaarp perscitus fab teck pvt ltd
Name of Work : Plot No. 55
Location: Wall (Basement RCC Wall) 104.05 to 107.05 , B-Type Bungalow 2ND LIFT
RL 104.05
South Side up to 107.05
1 Vertical Inner Face in Wall 8 99 3.368 1 0.15 335.004 0.000 0.000 0.000 0.000
Vertical Outer Face in Wall 8 99 3.368 1 0.15 335.004 0.000 0.000 0.000 0.000
Inner Side Horizontal Dist. Bar 8 11 19.34 1 0.2 203.070 0.000 0.000 0.000 0.000
Outer Side Horizontal Dist. Bar 8 11 19.34 1 0.2 203.070 0.000 0.000 0.000 0.000
107.05-104.05=
3
CL=3+46*.008
CL=3+46*.008
No.=((107.05-
104.05)/.2)+1
CHECKED 2/6/2016
Name of the projects: AMANORA PARK TOWN sector R-9/10 Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : SHARP ENGG.
Name of Work : Plot No. 55
Location: Footing , B-Type Bungalow
25.280 - - - CL=1.7-0.05-0.05
25.530 - - - CL=1.950-0.05-0.05
- - - -
- - - -
30.260 - - -
30.660 - - -
- - - -
- - - -
43.739 - - -
44.139 - - -
- - - -
- - - -
43.739 - - -
44.139 - - -
- - - -
- - - -
28.050 - - -
28.400 - - -
- - - -
- - - -
38.610 - - -
39.010 - - -
- - - -
- - - -
18.500 - - -
18.700 - - -
- - - -
- - - -
39.140 - - -
39.690 - - -
- - - -
- - - -
38.610 - - -
39.010 - - -
- - - -
- - - -
42.900 - - -
43.050 - - -
- - - -
- - - -
45.000 - - -
45.150 - - -
- - - -
- - - -
56.100 - - -
56.350 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
37.620 - - -
38.070 - - -
- - - -
- - - -
28.000 - - -
28.350 - - -
- - - -
- - - -
26.593 - - -
26.943 - - -
- - - -
- - - -
43.700 - - -
44.000 - - -
- - - -
- - - -
37.370 - - -
37.920 - - -
- - - -
- - - -
30.030 - - -
30.530 - - -
- - - -
- - - -
17.400 - - -
17.600 - - -
- - - -
- - - -
17.883 - - -
18.133 - - -
- - - -
- - - -
24.457 - - -
24.857 - - -
- - - -
- - - -
32.550 - - -
33.000 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
120.000 - - -
- - - -
- - - -
- - - - -
1618.763 0.000 0.000 0.000
1003.6 0.0 0.0 0.0
1.004 0.000 0.000 0.000
1.093 CHECKED 3/6/2016
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : Unity infraprojects Ltd.
Name of Work : Plot No. 55, B- Type Bungalow
. 950
Location: ColumN upto GRADE SLAB TOP
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
- - -
- - -
1 C2 (230X450) 475 - - -
Main steel 102.35 109.000 16 8 7.636 1 - - -
links a 102.35 107.05 8 40 1.168 1 0.1/0.15 46.525 - -
c 102.35 107.05 8 40 0.310 2 0.1/0.15 24.697 - -
- - -
2 C3 (230X600) 500 - - -
- - -
3 C4 (230X600) 600 - - -
Main steel 102.35 109.000 16 10 7.636 1 - - -
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.699 - -
b 102.35 107.05 8 41 0.972 1 39.528 - -
c 102.35 107.05 8 41 0.31 1 0.1/0.15 12.607 - -
- - -
4 C5 (230X600) 600 - - -
Main steel 102.35 109.000 16 10 7.636 1 - - -
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.699 - -
b 102.35 107.05 8 41 0.972 1 39.528 - -
c 102.35 107.05 8 41 0.31 1 0.1/0.15 12.607 - -
- - -
5 C6 (230X600) 500 - - -
Main steel 102.35 109.000 16 10 7.636 1 - - -
links a 102.35 107.05 8 40 1.468 1 0.1/0.15 58.720 - -
b 102.35 107.05 8 40 0.972 1 0.1/0.15 38.880 - -
c 102.35 107.05 8 40 0.31 1 0.1/0.15 12.400 - -
- - -
6 C7(230X600) 600 - - -
Main steel 102.35 109.000 16 8 7.636 1 - - -
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.699 - -
b 102.35 107.05 8 41 0.796 1 0.1/0.15 32.371 - -
- - -
7 C10(230X450) 450 - - -
Main steel 102.35 109.000 16 8 7.636 1 - - -
links a 102.35 107.05 8 40 1.168 1 0.1/0.15 46.331 - -
c 102.35 107.05 8 40 0.31 2 0.1/0.15 24.593 - -
- - -
8 C11(230X750) 550 - - -
Main steel 102.35 109.000 12 14 7.452 1 - - 104.328
links a 102.35 107.05 8 40 1.768 1 0.1/0.15 71.309 - -
b 102.35 107.05 8 40 0.906 1 0.1/0.15 36.542 - -
c 102.35 107.05 8 40 0.31 3 0.1/0.15 37.510 - -
- - -
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
9 C12(230X600) 600 - - -
Main steel 102.35 109.000 16 10 7.636 1 - - -
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.699 - -
b 102.35 107.05 8 41 0.972 1 0.1/0.15 39.528 - -
c 102.35 107.05 8 41 0.31 1 0.1/0.15 12.607 - -
- - -
10 C13(230X600) 575 - - -
Main steel 102.35 109.000 16 10 7.636 1 - - -
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.454 - -
b 102.35 107.05 8 41 0.972 1 0.1/0.15 39.366 - -
c 102.35 107.05 8 41 0.31 1 0.1/0.15 12.555 - -
- - -
11 C13A(230X600) 600 - - -
Main steel 102.35 109.000 16 12 7.636 1 - - -
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.699 - -
b 102.35 107.05 8 41 0.696 1 0.1/0.15 28.304 - -
c 102.35 107.05 8 41 0.31 2 0.1/0.15 25.213 - -
- - -
12 C14(230X750) 600 - - -
Main steel 102.35 109.000 12 14 8.052 1 - - 112.728
links a 102.35 107.05 8 41 1.768 1 0.1/0.15 71.899 - -
b 102.35 107.05 8 41 0.932 1 0.1/0.15 37.901 - -
c 102.35 107.05 8 41 0.31 3 0.1/0.15 37.820 - -
- - -
- - -
13 C16(300 dia) 300 - - -
Main steel 103.35 109.000 16 6 6.636 1 - - -
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
links a 103.35 107.05 8 31 1.134 1 0.1/0.15 34.776 - -
- - -
34.776 - -
links a 103.35 107.05 8 31 1.134 1 0.1/0.15
- - -
15 C18(230X1040) 575 - - -
Main steel 103.305 109.000 12 18 6.497 1 - - 116.946
links a 103.305 107.05 8 34 1.416 1 0.1/0.15 48.569 - -
b 103.305 107.05 8 34 1.182 2 0.1/0.15 81.085 - -
c 103.305 107.05 8 34 0.31 3 0.1/0.15 31.899 - -
- - -
16 C19(230X600) 500 - - -
Main steel 103.31 109.000 12 10 6.492 1 - - 64.920
links a 103.31 107.05 8 34 1.468 1 0.1/0.15 50.059 - -
b 103.31 107.05 8 34 0.976 1 33.282 - -
c 103.31 107.05 8 34 0.31 1 0.1/0.15 10.571 - -
- - -
17 C20 (230X600) 550 - - -
Main steel 103.21 109.000 16 8 6.776 1 - - -
Main steel 103.21 109.000 12 4 6.592 1 - - 26.368
links a 102.35 107.05 8 41 1.468 1 0.1/0.15 59.943 - -
b 102.35 107.05 8 41 0.696 1 0.1/0.15 28.420 - -
c 102.35 107.05 8 41 0.31 2 0.1/0.15 25.317 - -
- - -
18 C20A (230X600) 575 - - -
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
Main steel 103.31 109.000 16 10 6.676 1 - - -
links a 103.31 107.05 8 35 1.468 1 0.1/0.15 50.793 - -
b 103.31 107.05 8 35 0.976 1 33.770 - -
c 103.31 107.05 8 35 0.31 1 0.1/0.15 10.726 - -
- - -
19 C21 (230x750) 550 - - -
Main steel 103.26 109.000 16 12 6.726 1 - - -
links a 103.26 107.05 8 35 1.768 1 0.1/0.15 61.467 - -
b 103.26 107.05 8 35 0.748 1 26.005 - -
c 103.26 107.05 8 35 0.31 2 21.555 - -
- - -
21 C23 (230x950) 500 - - -
Main steel 103.54 109.000 16 12 6.446 1 - - -
links 103.54 107.05 8 33 2.168 1 0.1/0.15 70.605 - -
b 103.54 107.05 8 33 0.826 1 0.1/0.15 26.900 - -
c 103.54 107.05 8 33 0.31 2 0.1/0.15 20.191 - -
- - -
- - -
22 C24 (230x450) 425 - - -
Main steel 103.455 109.000 16 4 6.531 1 - - -
Sr. Column Top Dia. Wise Length Of Reinforcem
Description RL Dia Nos Cutting Length Set Spacing
No. Level 8mm 10mm 12mm
Main steel 103.455 109.000 12 4 6.347 1 - - 25.388
links 103.455 107.05 8 33 1.168 1 0.1/0.15 38.116 - -
103.455 107.05 8 33 0.31 2 20.233 - -
- - -
23 C25 (230X450) 450 - - -
Main steel 103.28 109.000 12 10 6.522 1 - - 65.220
links a 103.28 107.05 8 34 1.168 1 0.1/0.15 39.673 - -
b 103.28 107.05 8 34 0.826 1 0.1/0.15 28.056 - -
C 103.28 107.05 8 34 0.31 1 0.1/0.15 10.530 - -
- - -
24 C26(230X600) 475 - - -
Main steel 103.225 109.000 16 10 6.761 1 - - -
links a 103.025 107.05 8 36 1.468 1 0.1/0.15 52.603 - -
b 103.025 107.05 8 36 0.972 1 0.1/0.15 34.830 - -
c 103.025 107.05 8 36 0.31 1 11.108 - -
- - -
25 C27(230X600) 550 - - -
Main steel 103.28 109.000 16 10 6.706 1 - - -
links a 103.28 107.05 8 34 1.468 1 0.1/0.15 50.108 - -
b 103.28 107.05 8 34 0.972 1 0.1/0.15 33.178 - -
c 103.28 107.05 8 34 0.31 1 10.581 - -
- - -
Total Steel In Meter 2785.37 0.00 866.20
UNIT WT KG/M 0.395 0.617 0.888
TOTAL WT IN KG 1100.2 0.0 769.2
WT IN MT 1.100 0.000 0.769
TOTAL STEEL IN MT 3.870
107.05
CHECKED
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
76.360 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
76.360 - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
- - - -
- - - -
- - - -
- - - -
- - - -
76.360 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
61.088 - - -
- - - -
- - - -
- - - -
- - - -
61.088 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
- - - -
76.360 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
76.360 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
91.632 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
39.816 - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
- - - -
- - - -
- - - -
39.816 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
54.208 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
66.760 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
80.712 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
77.352 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
26.124 - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
- - - -
- - - - `
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
67.610 - - -
- - - -
- - - -
- - - -
- - - -
- - - -
67.060 - - -
- - - -
- - - -
- - - -
- - - -
90.096 - - -
- - - - `
- - - -
- - - -
. Wise Length Of Reinforcement
Remarks
16mm 20mm 25mm 32mm
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
1266.25 0.00 0.00 0.00
1.580 2.469 3.858 6.320
2000.7 0.0 0.0 0.0
2.001 0.000 0.000 0.000
3.870
Name Of Client: CITY Corporation Ltd, Pune
5 B5 230 450 - - - - -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Top Reinf. 12 2 6.51 1 - - 13.020 - -
Eos Left 12 2 2.377 1 - - 4.753 - -
Eos right 12 2 2.773 1 - - 5.547 - -
Stirrups 8 27 1.33 1 0.2 36.321 - - - -
EOS Link 8 3 0.83 2 4.968 - - - -
5 B5A 230 450 - - - - -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Top Reinf. 8 2 6.51 1 13.020 - - - -
Stirrups 8 27 1.33 1 0.2 36.321 - - - -
- - - - -
6 B6 230 450 - - - - -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Bottam Reinf. 16 2 5.69 1 - - - 11.380 -
Top Reinf. 10 2 6.51 1 - 13.020 - - -
Stirrups 8 27 1.33 1 0.2 36.321 - - - -
EOS Link 8 3 0.83 1 2.484 - - - -
7 B7 230 600 - - - - -
Bottam Reinf. 16 3 5.69 1 - - - 17.070 -
EOS 16 2 5.69 1 - - - 11.380 -
Top Reinf. 12 2 6.79 1 - - 13.580 - -
Eos Left 16 2 2.403 1 - - - 4.807 -
Eos right 16 2 2.773 1 - - - 5.547 -
Stirrups 8 14 1.63 2 0.125 45.801 - - - -
8 10 1.63 1 0.175 16.823 - - - -
EOS Link 8 3 0.68 2 4.068 - - - -
9 B9 230 600 - - - - -
Bottam Reinf. 16 3 5.69 1 - - - 17.070 -
Bottam Reinf. 16 3 5.69 1 - - - 17.070 -
Top Reinf. 12 2 6.51 1 - - 13.020 - -
Stirrups 8 19 1.63 2 0.1 60.453 - - - -
8 12 1.63 1 0.15 19.355 - - - -
EOS Link 8 3 0.68 2 4.068 - - - -
25 BR 230 450 - - - - -
Top Reinf. 16 1 2.6 1 - - - 2.600 -
Top Reinf. 16 2 3.83 1 - - - 7.660 -
Stirrups 8 8 1.33 1 0.15 10.181 - - - -
EOS Link 8 3 0.73 1 2.184 - - - -
26 BR 230 450 - - - - -
Top Reinf. 16 2 3.23 1 - - - 6.460 -
Stirrups 8 4 1.33 1 0.15 4.781 - - - -
EOS Link 8 3 0.73 1 2.184 - - - -
- - - - -
27 FB 230 450 - - - - -
Bottam Reinf. 12 2 1.8 1 - - 3.600 - -
Top Reinf. 10 2 2.21 1 - 4.420 - - -
Stirrups 8 9 1.33 1 0.15 11.952 - - - -
- - - - -
- - - - -
35 S8 200 - - - - -
Along span 10 8 4.698 1 0.15 - 39.075 - - -
Along span 10 7 4.718 1 0.15 - 34.523 - - -
Across Span 8 13 2.385 1 0.2 31.005 - - - -
Across Span 8 8 2.385 1 0.2 19.557 - - - -
Across Span 8 1 2.385 2 0.25 4.770 - - - -
- - - - -
- - - - -
36 ST1 200 - - - - -
Along span 12 13 5.75 1 0.1 - - 74.750 - -
Along span 12 7 1.99 1 0.1 - - 12.935 - -
Across Span 8 28 1.26 1 0.2 35.154 - - - -
Across Span 8 11 1.26 1 0.2 13.545 - - - -
- - - - -
37 ST2 200 - - - - -
Along span 12 13 3.99 1 0.1 - - 51.834 - -
Along span 12 7 1.73 1 0.1 - - 11.245 - -
Across Span 8 8 1.26 1 0.2 9.765 - - - -
Across Span 8 4 1.26 1 0.2 5.355 - - - -
- - - - -
38 ST3 200 - - - - -
Along span 12 13 6.84 1 0.1 - - 88.916 - -
Along span 12 7 3.08 1 0.1 - - 19.988 - -
Across Span 8 14 1.26 1 0.2 17.136 - - - -
Across Span 8 4 1.26 1 0.2 5.355 - - - -
39 s1 150
bentback 10 4 1.69 2 0.1 - 14.647 - - -
L bar 10 4 1.18 2 0.1 - 10.227 - - -
distri. 8 3 1 3 0.1 7.500 - - - -
bentback 10 3 1.69 2 0.1 - 11.267 - - -
L bar 10 3 1.18 2 0.1 - 7.867
B Extra Bar - - - - -
1 EXTRA BAR FOR 12 4 1.2 2 - - 9.600 - -
CUTOUT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6.000
-
-
6.0 0.0
23.1 0.0
0.023 0.000
checked 3/5/2016
Grade Slab steel qty.
sharp engg.
villa no. 55
Size of Cutting
Description Dia Nos Set
Sr. No. Beam Length
Widh Depth
B grade Slab 100
1 C14- C18
Main Steel 8 71 6.400 1
Dist bar 8 33 13.925 1
2 C27,C23 - C21-18
Main 8 74 5.480 1
Dist. 8 28 14.64 1
3 GARAGE 8 26 11.06 1
8 56 4.97 1
Total Steel In Meter
TOTAL WT IN KG
WT IN MT
TOTAL STEEL IN MT
y.
0.2 452.000 - - - - -
0.2 459.525 - - - - -
- - - - - -
0.2 406.616 - - - - -
0.2 415.776 - - - - -
0.2 285.901
0.2 279.811 - - - - -
2299.629 0.000 0.000 0.000 0.000 0.000 0.000
908.4 0.0 0.0 0.0 0.0 0.0 0.0
0.91 0.00 0.00 0.00 0.00 0.00 0.00
0.91
CHECKED 2/6/2016
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : SHARP ENGG.
Name of Work : Plot No. 55, B- Type Bungalow
.
Location: Colunm above grade slab top. To 1st floor slab
Sr. Column Top Cutting
Description RL Dia Nos Set Spacing
No. Level Length
(230X450)
1 C25
Main steel 109 112.900 12 10 4.452 1
b 107.05 110.95 8 34 1.168 1 0.1/0.15
c 107.05 110.95 8 34 0.846 1 0.1/0.15
d 107.05 110.95 8 34 0.31 1 0.1/0.15
2 C4,5 (230X600)
Main steel 109 112.900 16 8 4.636 2
Main steel 109 112.900 12 2 4.452 2
links a 107.05 110.95 8 34 1.468 2 0.1/0.15
b 107.05 110.95 8 34 0.988 2 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
2 C6 (230X600)
Main steel 109 112.900 16 10 4.636 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.988 1 0.1/0.15
c 107.05 110.95 8 34 0.31 1 0.1/0.15
2 C3 (230X600)
Main steel 109 112.900 12 10 4.452 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.988 1 0.1/0.15
c 107.05 110.95 8 34 0.31 1 0.1/0.15
3 C7 (230X600)
Main steel 109 112.900 16 8 4.636 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.84 2 0.1/0.15
7 C10 (230X450)
Main steel 109 112.900 16 8 4.636 1
links a 107.05 110.95 8 34 1.168 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
2 C12,13,20A,26,27 (230X600)
Main steel 109 112.900 16 10 4.636 5
links a 107.05 110.95 8 34 1.468 5 0.1/0.15
b 107.05 110.95 8 34 0.988 5 0.1/0.15
c 107.05 110.95 8 34 0.31 5 0.1/0.15
8 C11,14 (230X750)
Main steel 109 112.900 12 14 4.452 2
links a 107.05 110.95 8 34 1.768 2 0.1/0.15
b 107.05 110.95 8 34 0.932 2 0.1/0.15
c 107.05 110.95 8 34 0.31 6 0.1/0.15
11 C13A (230X600)
Main steel 109 112.900 16 12 4.636 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.67 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
15 C18(230X1040)
Main steel 109 112.900 12 18 4.452 1
links a 107.05 110.95 8 41 1.42 1 0.1/0.15
b 107.05 110.95 8 41 1.18 2 0.1/0.15
c 107.05 110.95 8 41 0.31 3 0.1/0.15
11 C23 (230X950)
Main steel 109 112.900 16 12 4.636 1
links a 107.05 110.95 8 34 2.168 1 0.1/0.15
b 107.05 110.95 8 34 0.826 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
2 C19 (230X600)
Main steel 109 112.900 16 6 4.636 1
Main steel 109 112.900 12 4 4.452 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.988 1 0.1/0.15
c 107.05 110.95 8 34 0.31 1 0.1/0.15
11 C20 (230X600)
Main steel 109 112.900 16 8 4.636 1
Main steel 109 112.900 12 4 4.636 1
links a 107.05 110.95 8 34 1.468 1 0.1/0.15
b 107.05 110.95 8 34 0.67 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
8 C21 (230X750)
Main steel 1.95 5.850 16 12 4.636 1
links a 107.05 110.95 8 34 1.768 1 0.1/0.15
b 107.05 110.95 8 34 0.728 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
7 C24 (230X450)
Main steel 109 112.900 16 4 4.636 1
Main steel 109 112.900 12 4 4.636 1
links a 107.05 110.95 8 34 1.168 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
7 C29,32 (230X450)
Main steel 108.1 110.750 16 8 3.386 2
links a 106.15 110.750 8 43 1.168 2 0.1/0.15
c 106.15 110.750 8 43 0.31 4 0.1/0.15
C30,31,33,34
7 (230X450)
Main steel 1.95 4.600 12 10 3.202 4
b 107.05 110.95 8 43 1.168 4 0.1/0.15
c 107.05 110.95 8 43 0.846 4 0.1/0.15
d 107.05 110.95 8 43 0.31 4 0.1/0.15
11 C16,17 (300 D)
Main steel 109 112.900 16 6 4.636 2
links a 107.05 110.8 8 31 0.841 2 0.1/0.15
7 C2 (230X450)
Main steel 109 112.900 16 8 4.636 1
links a 107.05 110.95 8 34 1.168 1 0.1/0.15
c 107.05 110.95 8 34 0.31 2 0.1/0.15
- - - - - - -
- - 128.080 - - - -
200.896 - - - - - -
145.512 - - - - - -
53.320 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - 55.632 - - -
52.422 - - - - - -
- - - - - - -
- - - - - - -
- - - 37.088 - - -
39.323 - - - - - -
20.873 - - - - - -
- - - - - - -
2753.33 0.00 494.62 823.75 0.00 0.00 0.00
0.395 0.617 0.888 1.580 2.469 3.858 6.320
1087.6 0.0 439.2 1301.5 0.0 0.0 0.0
1.088 0.000 0.439 1.302 0.000 0.000 0.000
2.828
CHECKED
Cutting Length of links
A B C
3 B3 230 1000
Bottam Reinf. 25 2 6.59 1
EOS 25 2 6.59 1
Top Reinf. 16 2 8.49 1
Eos left 25 2 3.227 1
Eos Right 25 2 3.227 1
Stirrups 10 22 2.43 2 0.1
10 13 2.43 1 0.15
EOS Link 10 3 0.84 2
SIDE FACE REINF. 16 2 6.59 2
4 B4 230 600
Bottam Reinf. 12 2 0.96 1
Top Reinf. 10 2 2.08 1
Stirrups 8 4 1.63 1 0.2
6 B6 230 600
Bottam Reinf. 25 2 5.69 1
EOS 25 2 5.69 1
Top Reinf. 16 2 6.79 1
RHS 25 2 3.007 1
LHS 16 2 2.287 1
Stirrups 10 13 1.63 2 0.125
10 9 1.63 1 0.25
EOS Link 10 3 0.84 2
7 B8 230 600
Bottam Reinf. 25 2 5.69 1
Bottam Reinf. 16 2 5.69 1
Top Reinf. 16 2 6.26 1
Eos Left 16 2 2.280 1
Eos right 16 3 2.640 1
Stirrups 10 13 1.63 2 0.125
10 7 1.63 1 0.2
EOS Link 10 3 0.89 2
37 B44
Bottam Reinf. 230 600 16 3 3.975 1
Top Reinf. 12 2 4.525 1
EOS left 16 1 1.882 1
Stirrups 8 8 1.63 2 0.15
8 7 1.63 1 0.2
EOS Link 8 3 0.88 2
37 B44A
Bottam Reinf. 230 600 16 4 3.975 1
Top Reinf. 12 2 4.525 1
Stirrups 8 10 1.63 2 0.125
8 5 1.63 1 0.25
38 B45
Bottom Reinf. 230 600 16 2 3.455 1
Top Reinf. 16 2 3.455 1
EOS left 16 2 2.378 1
EOS right 16 2 1.982 1
Stirrups 8 26 1.63 1 0.1
EOS Link 8 3 0.78 2
40 B46
Bottom Reinf. 230 600 12 3 2.105 1
Top Reinf. 10 2 2.105 1
Stirrups 8 12 1.63 1 0.2
EOS Link 8 3 0.98 2
41 B47
Bottam Reinf. 230 600 25 2 5.58 1
16 2 5.58 2
Top Reinf. 16 2 5.58 1
Stirrups 8 16 1.63 2 0.1
9 11 1.63 1 0.15
EOS Link 8 3 0.78 2
43 B13
Bottam Reinf. 300 425 25 4 6.59 1
Top Reinf. 25 2 8.89 1
Stirrups 10 22 1.42 2 0.1
Stirrups 10 13 1.42 1 0.15
EOS Link 10 3 0.77 2
52 HB 230 175
Bottam Reinf. 16 3 5.688 1
Top Reinf. 12 2 5.688 1
Stirrups 8 27 0.78 2 0.2
52 HB 230 225
Bottam Reinf. 16 3 5.688 1
Top Reinf. 12 2 5.688 1
Stirrups 8 27 0.96 2 0.2
B Slab Thickness
2 S2 150
Along span 10 25 4.176 1 0.15
Along span 10 6 4.637 1 0.15
Along span 10 7 4.183 1 0.15
Across Span 8 15 5.69 1 0.25
Across Span 8 2 5.69 1 0.25
Across Span 8 2 3.07 1 0.25
Across Span 8 4 1.72 1 0.25
3 S4(A) 125
Along span 10 28 3.01 1 0.125
Across Span 8 11 3.74 1 0.25
Across Span AT b/p 8 4 3.74 1 0.25
3 S4(B) 125
Along span 10 28 3.01 1 0.125
Across Span 8 11 3.74 1 0.25
Across Span 8 4 3.74 1 0.25
4 S5(A) 115
Along span 8 5 3.832 1 0.2
Along span 8 4 3.837 1 0.2
Across Span 8 11 2.140 1 0.25
Across Span 8 6 2.140 1 0.25
4 S5(B) 115
Along span 8 5 4.109 1 0.2
Along span 8 4 3.757 1 0.2
Across Span 8 10 2.140 1 0.25
Across Span 8 6 2.140 1 0.25
4 S17 150
Along span 8 15 5.599 1 0.125
Along span 8 14 4.056 1 0.125
Across Span 8 29 4.15 1 0.2
Across Span 8 3 3.975 3 0.25
Across Span/btp 8 5 3.975 1 0.25
4 S16 150
Along span 8 29 2.061 1 0.125
Across Span 8 7 3.975 1 0.1
Across Span/btp 8 2 3.975 2 0.25
4 S6 175
Along span 10 71 5.902 1 0.1
Along span 10 12 5.902 1 0.1
Along span 10 11 7.463 1 0.1
Across Span 8 26 9.61 1 0.2
Across Span 8 7 7.405 1 0.25
Across Span 8 2 2.415 1 0.2
4 S8(SUNK) 200
Along span 12 29 5.937 1 0.1
Extra Bar 12 15 2.018 2 0.2
Across Span 8 22 3.215 1 0.25
Across Span 8 6 3.215 2 0.25
6 S7 225
Along span 12 37 6.873 1 0.1
Extra Bar 12 19 2.243 2 0.2
Across Span 8 42 4.12 1 0.15
Across Span 8 5 4.12 2 0.15
7 S9 200
Along span 12 38 6.837 1 0.125
Along span 12 14 6.837 1 0.125
Along span 12 22 8.225 1 0.125
Extra Bar 12 39 2.293 1 0.2
Extra Bar 12 14 2.293 1 0.2
Across Span 8 32 10.03 1 0.2
Across Span 8 12 10.03 1 0.2
10 S11 175
Along span 8 36 5.642 1 0.125
Along span 8 8 6.304 1 0.125
Across Span 8 41 5.902 1 0.125
Across Span 8 6 5.430 1 0.25
Across Span 8 6 5.690 1 0.25
Across Span 8 2 1.720 1 0.25
10 S12 175
Along span 10 10 4.688 1 0.1
Along span 10 4 4.097 1 0.1
Along span 10 10 4.733 1 0.1
Along span 10 4 4.097 1 0.1
Across Span 8 13 2.575 1 0.2
Across Span 8 5 2.575 1 0.2
10 S3 CHAJJA 150
Along span 8 5 1.650 7 0.125
Along span 8 4 1.140 7 0.125
Across Span 8 2 0.96 7 0.2
Across Span 8 2 0.96 7 0.2
10 S3 CHAJJA 150
Along span 8 4 1.650 3 0.125
Along span 8 3 1.140 3 0.125
Across Span 8 2 0.7 3 0.2
Across Span 8 2 0.7 3 0.2
12 ST1 175
Along span 12 13 7.09 1 0.1
Along span 12 7 2.12 1 0.1
Across Span 8 14 1.26 1 0.2
Across Span 8 7 1.26 1 0.2
Across Span 8 4 1.26 1 0.2
12 ST2 175
Along span 12 13 4.20 1 0.1
Along span 12 8 2.12 1 0.1
Across Span 8 7 1.26 1 0.2
Across Span 8 8 1.26 1 0.2
Across Span 8 4 1.26 1 0.2
13 ST3 175
Along span 12 13 7.07 1 0.1
Along span 12 13 3.20 1 0.1
Across Span 8 14 1.26 1 0.2
Across Span 8 4 1.26 1 0.2
Extra Bar
Extra Bar for Cutout 12 4 1.2 2
Pin 25 75 0.2 1
Chairs 10 80 1 1
- - - - - -
- - 1.920 - - -
- 4.160 - - - -
6.024 - - - - -
- - - - - -
- - - - - -
- - - - - 22.760
- - - 22.760 - -
- - 13.580 - - -
- - 12.480 - - -
- - - 5.053 - -
- - - 8.087 - -
161.823 - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - - - - 11.380
- - - - - 11.380
- - - 13.580 - -
- - - - - 6.013
- - - 4.573 - -
- 42.762 - - - -
- 14.833 - - - -
- 5.040 - - - -
- - - - - -
- - - - - -
- - - - - 11.380
- - - 11.380 - -
- - - 12.520 - -
- - - 4.560 - -
- - - 7.920 - -
- 42.328 - - - -
- 10.582 - - - -
- 5.340 - - - -
- - - - - -
- - - - - -
- - - 28.450 - -
- - - 12.780 - -
- - - 5.280 - -
- - - 6.810 - -
42.328 - - - - -
10.582 - - - - -
5.004 - - - - -
- - - - - -
- - - - - -
- - - 16.040 - -
- - - - - -
25.071 - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - 11.380
- - - - - 11.380
- - - 13.620 - -
- - - - - 4.540
- 49.014 - - - -
- 17.438 - - - -
- 2.670 - - - -
- - - - - -
- - - - - -
- - - - - 11.380
- - - - - 5.690
- - - 18.990 - -
- 49.014 - - - -
- 17.438 - - - -
- 5.340 - - - -
- - - - - -
- - - 19.770 - -
- - - 13.180 - -
- - 15.380 - - -
47.899 - - - - -
15.113 - - - - -
2.502 - - - - -
- - - - - -
- - - - - -
- - - 28.450 - -
- - 13.620 - - -
41.387 - - - - -
25.343 - - - - -
- - - - - -
- - - 22.760 - -
- - 13.580 - - -
31.855 - - - - -
9.811 - - - - -
- - - - - -
- - - - - -
- - - 22.760 - -
- - 13.580 - - -
31.855 - - - - -
9.811 - - - - -
2.502 - - - - -
- - - - - -
- - - - - -
- - 12.435 - - -
- 10.490 - - - -
- - - 3.777 - -
- - - 4.497 - -
21.462 - - - - -
5.655 - - - - -
5.904 - - - - -
- - - - - -
- - - - - -
- - - 6.180 - -
- - 7.280 - - -
- - - 3.053 - -
- - - 4.970 - -
16.791 - - - - -
5.304 - - - - -
- - - - - -
- - - - - -
- - - 17.120 - -
- - - 16.140 - -
58.413 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - 5.570 - -
- - 6.670 - - -
- 15.728 - - - -
- 3.529 - - - -
- 5.040 - - - -
- - - - - -
- - - - - -
- - - 6.928 - -
- 31.648 - - - -
- 5.340 - - - -
- - - - - -
- - - - - -
- - - - - 34.500
- - - - - 6.890
- 32.039 - - - -
- 2.670 - - - -
- - - - - -
- - - - - -
- - - 5.570 - -
- - 7.110 - - -
22.109 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - 5.570 - -
- - 7.110 - - -
21.428 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 10.200 - - -
- 7.920 - - - -
- - 3.180 - - -
17.648 - - - - -
6.504 - - - - -
- - - - - -
- - - - - -
- - - - - 15.940
- - - - - 7.970
- - - 4.923 - -
- 36.467 - - - -
- 5.340 - - - -
- - - - - -
- - - - - -
- - - - - 9.520
- - - 4.760 - -
- - 9.520 - - -
- - - 5.383 - -
- - - 4.683 - -
- 29.304 - - - -
- 8.140 - - - -
- 5.640 - - - -
- - - - - -
- - - - - -
- - 8.355 - - -
- 5.570 - - - -
12.074 - - - - -
5.155 - - - - -
5.904 - - - - -
- - - - - -
- - - - - -
- - - - - 8.850
- - 8.850 - - -
- - - 4.360 - -
52.340 - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - - 5.270 - -
- - - - - 8.060
- - - 8.060 - -
48.026 - - - - -
2.352 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - 2.820 - -
- - - 3.920 - -
7.977 - - - - -
- - - - - -
- - - - - -
- - - - - 7.270
- - - 7.270 - -
23.715 - - - - -
5.304 - - - - -
- - - - - -
- - - - - -
- - - - - 9.520
- - - - - 9.520
- - - 9.520 - -
- - - - - 4.957
- - - 4.683 - -
- 97.029 - - - -
- 5.340 - - - -
- - - - - -
- - - - - -
- - - 5.570 - -
- - - 5.570 - -
- - 5.377 - - -
14.856 - - - - -
5.904 - - - - -
- - - - - -
- - - - - -
- - - - - 17.850
- - - 11.900 - -
53.615 - - - - -
15.158 - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - - 9.180 - -
- - - - - 14.640
25.071 - - - - -
2.502 - - - - -
- - - - - -
- - - - - -
- - 2.780 - - -
- - - 6.320 - -
14.652 - - - - -
- - - - - -
- - - - - -
- - - 11.925 - -
- - 9.050 - - -
- - - 1.882 - -
27.387 - - - - -
10.677 - - - - -
5.304 - - - - -
- - - - - -
- - - - - -
- - - 15.900 - -
- - 9.050 - - -
32.213 - - - - -
8.867 - - - - -
- - - - - -
- - - - - -
- - - 6.910 - -
- - - 6.910 - -
- - - 4.757 - -
- - - 3.963 - -
41.514 - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - 6.315 - - -
- 4.210 - - - -
19.088 - - - - -
5.904 - - - - -
- - - - - -
- - - - - -
- - - - - 11.160
- - - 22.320 - -
- - - 11.160 - -
51.228 - - - - -
- - - - - -
4.704 - - - - -
- - - - - -
- - - - - -
- - - 9.180 - -
- - - - - 14.640
25.071 - - - - -
2.034 - - - - -
- - - - - -
- - - - - -
- - - - - 26.360
- - - - - 17.780
- 61.163 - - - -
- 18.024 - - - -
- 4.608 - - - -
- - - - - -
- - - - - -
- - - 4.760 - -
- - - 13.280 - -
37.229 - - - - -
12.000 - - - - -
- - - - - -
- - - 5.920 - -
- - 9.720 - - -
33.264 - - - - -
18.000 - - - - -
- - - - - -
- - - - - -
- - - 17.064 - -
- - 11.376 - - -
42.564 - - - - -
- - - - - -
- - - 17.064 - -
- - 11.376 - - -
52.412 - - - - -
- - - - - -
- - - - - -
- - - 6.140 - -
12.544 - - - - -
2.034 - - - - -
- - - - - -
- - - 6.140 - -
12.544 - - - - -
- - - - - -
- 4.520 - - - -
- - 2.320 - - -
11.603 - - - - -
- - - - - -
- - - - - -
- 103.013 - - - -
- 26.588 - - - -
- 28.162 - - - -
87.171 - - - - -
11.640 - - - - -
6.280 - - - - -
6.158 - - - - -
- - - - - -
- - - - - -
- - - - - -
- 82.837 - - - -
40.317 - - - - -
14.191 - - - - -
- - - - - -
- - - - - -
- 82.837 - - - -
40.317 - - - - -
14.191 - - - - -
- - - - - -
- - - - - -
20.307 - - - - -
16.497 - - - - -
23.069 - - - - -
12.605 - - - - -
- - - - - -
- - - - - -
21.778 - - - - -
16.153 - - - - -
22.384 - - - - -
12.262 - - - - -
- - - - - -
- - - - - -
85.212 - - - - -
57.679 - - - - -
119.056 - - - - -
36.150 - - - - -
18.047 - - - - -
- - - - - -
- - - - - -
60.667 - - - - -
27.825 - - - - -
14.764 - - - - -
- - - - - -
- 417.014 - - - -
- 71.558 - - - -
- 83.020 - - - -
253.224 - - - - -
52.004 - - - - -
5.324 - - - - -
- - - - - -
- - - - - -
- - 171.882 - - -
- - 60.424 - - -
70.987 - - - - -
40.316 - - - - -
- - - - - -
- - - - - -
- - 256.352 - - -
- - 85.888 - - -
173.589 - - - - -
37.292 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 260.908 - - -
- - 96.541 - - -
- - 180.384 - - -
- - 89.774 - - -
- - 31.637 - - -
319.456 - - - - -
123.770 - - - - -
- - - - - -
- - - - - -
204.681 - - - - -
49.674 - - - - -
242.442 - - - - -
32.704 - - - - -
32.579 - - - - -
3.440 - - - - -
- - - - - -
- - - - - -
- 45.004 - - - -
- 17.718 - - - -
- 45.436 - - - -
- 17.718 - - - -
33.475 - - - - -
11.845 - - - - -
- - - - - -
- - - - - -
57.750 - - - - -
31.920 - - - - -
10.080 - - - - -
10.080 - - - - -
- - - - - -
- - - - - -
18.810 - - - - -
9.576 - - - - -
3.150 - - - - -
3.150 - - - - -
- - - - - -
- - 92.105 - - -
- - 13.748 - - -
17.987 - - - - -
8.190 - - - - -
5.355 - - - - -
- - - - - -
- - 54.600 - - -
- - 15.863 - - -
8.694 - - - - -
9.450 - - - - -
5.355 - - - - -
- - - - - -
- - - - - -
- - 91.910 - - -
- - 41.600 - - -
17.987 - - - - -
5.355 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 9.600 - - -
- - - - - 15.000
- 80.000 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
4183.213 1920.836 1785.428 724.666 0.000 386.977 0.000
1652.4 1190.9 1589.0 1145.0 0.0 1493.7 0.0
1.65 1.19 1.59 1.14 0.00 1.49 0.00
7.07
Remarks
76.32
65
CHECKED 7/6/2016
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
43 B49,50
EOS 12 1 5.16 2
43 B51,53
43 B 54
43 B 52
B Slab Thickness
10 S13 175
2 S14 115
2 S15 125
Extra Bar
Pin 25 16 0.2 1
Chairs 10 24 1.5 1
Chairs 10 30 1 1
TOTAL WT IN KG
WT IN MT
TOTAL STEEL IN MT
CHECKED
- - - - - -
- - - - - -
- - - 20.640 - -
- - 10.320 - - -
- - 25.040 - - -
- - - 4.992 - -
- - - 4.552 - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
71.892 - - - - -
21.262 - - - - -
10.848 - - - - -
- - - - - -
- - - - - -
- - - - - 69.680
- - - 37.040 - -
- - - 14.133 - -
- - - 14.800 - -
146.737 - - - - -
55.171 - - - - -
10.248 - - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- - - - - -
- - - - - -
- - 5.080 - - -
- - 6.180 - - -
36.142 - - - - -
4.824 - - - - -
- - - - - -
- - - - - -
- - 5.520 - - -
- - 6.620 - - -
32.560 - - - - -
4.824 - - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 10.318 - - -
- 12.518 - - - -
38.413 - - - - -
6.024 - - - - -
- 10.318 - - - -
26.913 - - - - -
- - - - - -
- - - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- - - 10.318 - -
- 12.518 - - - -
38.413 - - - - -
6.024 - - - - -
- 10.318 - - - -
26.913 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - 70.880 - -
- - 37.640 - - -
123.294 - - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
43.793 - - - - -
10.848 - - - - -
- 34.840 - - - -
77.510 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 5.080 - - -
- 6.180 - - - -
18.885 - - - - -
6.024 - - - - -
- 10.160 - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
23.684 - - - - -
- - - - - -
- - - - - -
- - 5.520 - - -
- 6.620 - - - -
17.094 - - - - -
6.024 - - - - -
- 11.040 - - - -
21.531 - - - - -
- - - - - -
- - - - - -
- - - 10.318 - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- 12.518 - - - -
76.842 - - - - -
6.024 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 353.953 - - - -
- 366.441 - - - -
- 187.745 - - - -
197.157 - - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
80.864 - - - - -
40.120 - - - - -
108.383 - - - - -
- - - - - -
- - - - - -
86.928 - - - - -
48.917 - - - - -
22.822 - - - - -
- - - - - -
- - - - - -
- 282.392 - - - -
- 188.078 - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- 381.092 - - - -
- 253.878 - - - -
108.000 - - - - -
53.100 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 9.600 - - -
- - - - - 3.200
- 36.000 - - - -
- 45.000 - - - -
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- 30.000 - - - -
- - - - - -
- - - - - -
2.764
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : SHARP ENGG.
Name of Work : Plot No. 55, B- Type Bungalow
.
Location: Colunm above 1st slab top. To Roof slab top
Sr. Column Top Cutting
Description RL Dia Nos Set Spacing
No. Level Length
1 C4,5 (230X600)
Main steel 112.9 115.75 12 8 3.402 2
Main steel 112.9 115.75 12 2 3.402 2
links a 110.95 115.15 8 37 1.468 2 0.1/0.15
b 110.95 115.15 8 37 0.988 2 0.1/0.15
c 110.95 115.15 8 37 0.31 2 0.1/0.15
2 C6 (230X600)
Main steel 112.9 115.75 16 8 3.586 1
links a 110.95 115.15 8 37 1.468 1 0.1/0.15
b 110.95 115.15 8 37 0.774 1 0.1/0.15
3 C3 (230X600)
Main steel 112.9 115.75 12 10 3.402 1
links a 110.95 115.15 8 37 1.468 1 0.1/0.15
b 110.95 115.15 8 37 0.988 1 0.1/0.15
c 110.95 115.15 8 37 0.31 1 0.1/0.15
4 C7 (230X600)
Main steel 112.9 115.75 16 4 3.586 1
Main steel 112.9 115.75 12 8 3.402 1
links a 110.95 115.15 8 37 1.468 1 0.1/0.15
b 110.95 115.15 8 37 0.84 2 0.1/0.15
5 C10 ,2 (230X450)
Main steel 112.9 115.75 16 4 3.586 2
Main steel 112.9 115.75 12 4 3.402 2
links a 110.95 115.15 8 37 1.168 2 0.1/0.15
c 110.95 115.15 8 37 0.31 4 0.1/0.15
6 C12 (230X600)
Main steel 112.9 117.37 12 10 5.022 1
links a 110.95 115.15 8 54 1.468 1 0.1/0.15
b 110.95 115.15 8 54 0.988 1 0.1/0.15
c 110.95 115.15 8 54 0.31 1 0.1/0.15
7 C13 (230X600)
Main steel 112.9 118.61 16 8 6.446 1
links a 110.95 118.01 8 62 1.468 1 0.1/0.15
b 110.95 118.01 8 62 0.774 1 0.1/0.15
8 C13A (230X600)
Main steel 112.9 118.25 12 10 5.902 1
links a 110.95 115.55 8 60 1.468 1 0.1/0.15
b 110.95 115.55 8 60 0.988 1 0.1/0.15
c 110.95 115.55 8 60 0.31 1 0.1/0.15
9 C14(230X750)
Main steel 112.9 116.15 12 10 3.802 1
links a 110.95 115.55 8 41 1.768 1 0.1/0.15
b 110.95 115.55 8 41 1.13 1 0.1/0.15
c 110.95 115.55 8 41 0.31 1 0.1/0.15
10 C11 (230X750)
Main steel 112.9 115.85 12 12 3.502 1
links a 110.95 115.25 8 38 1.768 1 0.1/0.15
b 110.95 115.25 8 38 0.712 1 0.1/0.15
c 110.95 115.25 8 38 0.31 2 0.1/0.15
11 C18(230X1040)
Main steel 112.9 115.85 12 18 4.054 1
links a 110.95 115.25 8 39 1.42 1 0.1/0.15
b 110.95 115.25 8 39 1.18 2 0.1/0.15
c 110.95 115.25 8 39 0.31 3 0.1/0.15
12 C19(230X600)
Main steel 112.9 117.35 16 6 5.922 1
Main steel 112.9 117.35 12 4 5.554 1
links a 110.95 116.757 8 54 1.468 1 0.1/0.15
b 110.95 116.757 8 54 0.988 1
c 110.95 116.757 0 54 0.31 1 0.1/0.15
13 C20 (230X600)
Main steel 112.9 118.61 16 8 7.182 1
Main steel 112.9 118.61 12 4 6.814 1
links a 110.95 118.01 8 59 1.468 1 0.1/0.15
b 110.95 118.01 8 59 0.67 1 0.1/0.15
c 110.95 118.01 8 59 0.31 2 0.1/0.15
14 C20A (230X600)
Main steel 112.9 118.25 16 10 6.822 1
links a 110.95 117.65 8 59 1.468 1 0.1/0.15
b 110.95 117.65 8 59 0.988 1
c 110.95 117.65 8 59 0.31 1
15 C21 (230x750)
Main steel 112.9 115.75 12 12 3.954 1
links 110.95 115.15 8 37 1.768 1 0.1/0.15
b 110.95 115.15 8 37 0.728 1 0.1/0.15
c 110.95 115.15 8 37 0.31 2 0.1/0.15
16 C23 (230x950)
Main steel 112.9 115.75 16 6 4.322 1
Main steel 112.9 115.75 12 6 3.954 1
links 110.95 115.15 8 37 2.168 1 0.1/0.15
b 110.95 115.15 8 37 0.802 1 0.1/0.15
c 110.95 115.15 8 37 0.31 2 0.1/0.15
17 C24 (230x450)
Main steel 112.9 115.75 16 4 4.322 1
Main steel 110.95 115.15 12 4 5.304 1
links 110.95 115.15 8 37 1.168 1 0.1/0.15
110.95 115.15 8 37 0.31 2
18 C25 (230X450)
Main steel 112.9 115.75 12 10 3.402 1
b 110.95 115.15 8 37 1.168 1 0.1/0.15
c 110.95 115.15 8 37 0.846 1 0.1/0.15
d 110.95 115.15 8 37 0.31 1 0.1/0.15
19 C26(230X600)
Main steel 112.9 115.75 16 10 4.322 1
links a 110.95 115.15 8 37 1.468 1 0.1/0.15
b 110.95 115.15 8 37 0.988 1
c 110.95 115.15 8 37 0.31 1
20 C27(230X600)
Main steel 112.9 115.75 16 8 3.586 1
links a 110.95 115.15 8 37 1.468 1 0.1/0.15
b 110.95 115.15 8 37 0.828 1
Total Steel In Meter
UNIT WT KG/M
TOTAL WT IN KG
WT IN MT
TOTAL STEEL IN MT
Dia. Wise Length Of Reinforcement
Remarks
8mm 10mm 12mm 16mm 20mm 25mm 32mm
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - 54.432 - - - -
- - 13.608 - - - -
107.653 - - - - - -
72.453 - - - - - -
22.733 - - - - - -
- - - - - - -
- - - - - - -
- - - 28.688 - - -
53.827 - - - - - -
28.380 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - 34.020 - - - -
53.827 - - - - - -
36.227 - - - - - -
11.367 - - - - - -
- - - - - - -
- - - - - - -
- - - 14.344 - - -
- - 27.216 - - - -
53.827 - - - - - -
61.600 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - 28.688 - - -
- - 27.216 - - - -
85.653 - - - - - -
45.467 - - - - - -
- - - - - - -
- - - - - - -
- - 50.220 - - - -
79.517 - - - - - -
53.517 - - - - - -
16.792 - - - - - -
- - - - - - -
- - - - - - -
- - - 51.568 - - -
90.869 - - - - - -
47.911 - - - - - -
- - - - - - -
- - 59.020 - - - -
88.716 - - - - - -
59.708 - - - - - -
18.734 - - - - - -
- - - - - - -
- - - - - - -
- - 38.020 - - - -
71.899 - - - - - -
45.953 - - - - - -
12.607 - - - - - -
- - - - - - -
- - - - - - -
- - 42.024 - - - -
66.595 - - - - - -
26.819 - - - - - -
23.353 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - 72.972 - - - -
55.664 - - - - - -
92.512 - - - - - -
36.456 - - - - - -
- - - - - - -
- - - - - - -
- - - 35.532 - - -
- - 22.216 - - - -
78.538 - - - - - -
52.858 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - 57.456 - - -
- - 27.256 - - - -
86.367 - - - - - -
39.418 - - - - - -
36.477 - - - - - -
- - - - - - -
- - - - - - -
- - - 68.220 - - -
86.612 - - - - - -
58.292 - - - - - -
18.290 - - - - - -
- - - - - - -
- - - - - - -
- - 47.448 - - - -
64.827 - - - - - -
26.693 - - - - - -
22.733 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - 25.932 - - -
- - 23.724 - - - -
79.493 - - - - - -
29.407 - - - - - -
22.733 - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - 17.288 - - -
- - 21.216 - - - -
42.827 - - - - - - `
22.733 - - - - - -
- - - - - - -
- - - - - -
- - - - - - -
- - 34.020 - - - -
42.827 - - - - - -
31.020 - - - - - -
11.367 - - - - - -
- - - - - - -
- - - - - - -
- - - 43.220 - - -
53.827 - - - - - -
36.227 - - - - - -
11.367 - - - - - -
- - - - - - -
- - - - - - -
- - - 28.688 - - -
53.827 - - - - - -
30.360 - - - - - -
2559.75 0.00 594.63 399.62 0.00 0.00 0.00
0.395 0.617 0.888 1.580 2.469 3.858 6.320
1011.1 0.0 528.0 631.4 0.0 0.0 0.0
1.011 0.000 0.528 0.631 0.000 0.000 0.000
2.171
CHECKED 3/6/2016
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : sharp engg.
Name of Work : Plot No. 55, B- Type Bungalow
Location: Roof slab Dia. Wise
Sr. Cutting Length Of
Description Dia Nos Set Spacing
No. Length Reinforceme
8mm
nt
A Beams (230x450)
1 TB betn C12-C-13
Bottam Reinf. 12 2 4.76 1 -
Top Reinf. 12 2 5.17 1 -
Stirrups 8 25 1.33 1 0.15 33.200
EOS link 8 3 0.87 2 5.232
-
2 TB betn C13-C-13A -
Bottam Reinf. 12 2 2.805 1 -
Top Reinf. 12 2 2.805 1 -
Stirrups 8 12 1.33 1 0.15 15.715
EOS link 8 3 0.87 2 5.232
-
3 TB2 betn C13A-C-14 -
Bottam Reinf. 12 2 4.445 1 -
Top Reinf. 12 2 4.855 1 -
Stirrups 8 22 1.33 1 0.15 28.906
EOS link 8 3 0.87 2 5.232
-
-
4 TB betn C19-C-20 -
Bottam Reinf. 12 2 4.76 1 -
Top Reinf. 12 2 5.17 1 -
Stirrups 8 25 1.33 1 0.15 33.200
EOS link 8 3 0.87 2 5.232
-
5 TB betn C20-C20A -
Bottam Reinf. 12 2 2.805 1 -
Top Reinf. 12 2 2.805 1 -
Stirrups 8 12 1.33 1 0.15 15.715
EOS link 8 3 0.87 2 5.232
-
6 TB1 betn C20A-C-21 -
Bottam Reinf. 12 2 5.97 1 -
Top Reinf. 12 2 6.38 1 -
Stirrups 8 32 1.33 1 0.15 42.407
EOS link 8 3 0.87 2 5.232
-
7 TB1 betn C13A-C-20A -
Bottam Reinf. 16 2 6.59 1 -
Bottam Reinf. 12 2 6.59 1 -
Top Reinf. 12 2 7.41 1 -
Stirrups 8 42 1.33 1 0.15 55.953
EOS link 8 3 0.87 2 5.232
-
B ROOF BEAM -
1 B1(230X430) -
Bottam Reinf. 16 3 2.96 1 -
Top Reinf. 12 2 3.74 1 -
Stirrups 8 21 1.29 1 0.125 27.460
-
2 B2 (230X900) -
Bottam Reinf. 16 2 5.69 1 -
Top Reinf. 12 2 7.37 1 -
EOS L&R 16 2 2.880 2 -
SIDE FACE REINF 8 2 5.697 2 22.788
Stirrups 8 9 2.23 2 200 40.327
Stirrups 8 5 2.23 1 250 12.120
EOS link 8 3 0.97 2 5.832
-
3 B3 (230X600) -
Bottam Reinf. 32 4 6.59 1 -
Top Reinf. 32 2 7.65 1 -
Top Reinf. 25 1 7.65 1 -
Stirrups 12 63 1.72 1 100 -
PIN 25 8 0.19 1 -
EOS link 8 3 0.77 2 4.632
-
4 B4 (230X600) -
Bottam Reinf. 25 2 6.59 1 -
Bottam Reinf. 16 1 6.59 1 -
Top Reinf. 12 2 7.65 1 -
EOS LEFT & right 16 1 2.79667 2 -
Stirrups 8 22 1.63 2 100 70.232
Stirrups 8 13 1.63 1 150 20.697
EOS link 8 3 0.77 1 2.316
-
5 B6 (230X900) -
Bottam Reinf. 16 2 5.69 1 -
Bottam Reinf. 12 1 5.69 1 -
Top Reinf. 12 2 5.69 1 -
EOS Left 16 2 3.803 1 -
EOS RIGHT 16 2 3.287 1 -
SIDE FACE REINF 8 2 5.69 2 22.760
Stirrups 8 9 2.23 2 200 38.247
Stirrups 8 5 2.23 1 250 11.289
PIN 25 4 0.19 1 -
EOS link 8 3 0.97 2 5.832
-
6 B7 (230X900) -
Bottam Reinf. 16 4 6.59 1 -
Top Reinf. 12 2 8.27 1 -
EOS L&R 16 2 3.11 2 -
SIDE FACE REINF 8 2 6.59 2 26.360
Stirrups 8 15 2.23 2 150 65.553
Stirrups 8 9 2.23 1 200 20.683
PIN 25 4 0.19 1 -
EOS link 8 3 0.87 1 2.616
-
7 B8 (230X900) -
Bottam Reinf. 16 2 5.69 1 -
Top Reinf. 12 2 7.37 1 -
SIDE FACE REINF 8 2 5.69 2 22.760
Stirrups 8 10 2.23 2 200 43.595
Stirrups 8 5 2.23 1 250 12.239
-
8 B9 (230X900) -
Bottam Reinf. 16 2 5.69 1 -
Bottam Reinf. 12 1 5.69 1 -
Top Reinf. 12 2 7.37 1 -
SIDE FACE REINF 8 2 5.69 2 22.760
Stirrups 8 10 2.23 2 200 43.595
Stirrups 8 6 2.23 1 250 13.427
-
9 B10 (230X900) -
Bottam Reinf. 16 2 4.165 1 -
Top Reinf. 10 2 5.005 1 -
EOS LEFT 16 1 2.168 1 -
EOS RIGHT 16 1 2.485 1 -
SIDE FACE REINF 8 2 4.165 2 16.660
Stirrups 8 7 2.23 2 200 29.372
Stirrups 8 3 2.23 1 250 7.739
EOS link 8 3 0.97 2 5.832
-
10 B11 (230X900) -
Bottam Reinf. 12 2 3.13 1 -
Top Reinf. 10 2 3.13 1 -
EOS RIGHT 16 1 2.197 1 -
SIDE FACE REINF 8 2 3.13 2 12.520
Stirrups 8 5 2.23 2 200 21.537
Stirrups 8 2 2.23 1 250 4.605
EOS link 8 3 0.97 2 5.832
-
11 B12 (230X900) -
Bottam Reinf. 16 2 4.06 1 -
Top Reinf. 12 2 4.06 1 -
EOS RIGHT 16 1 2.095 1 -
SIDE FACE REINF 8 2 4.06 2 16.240
Stirrups 8 7 2.23 2 200 31.192
Stirrups 8 4 2.23 1 250 8.466
EOS link 8 3 0.97 2 5.832
-
12 B13 (230X900) -
Bottam Reinf. 12 2 2.825 1 -
Top Reinf. 10 2 2.825 1 -
EOS RIGHT 16 1 2.03 1 -
SIDE FACE REINF 8 2 2.825 2 11.300
Stirrups 8 4 2.23 2 200 19.272
Stirrups 8 2 2.23 1 250 3.698
EOS link 8 3 0.97 2 5.832
-
13 B14 (230X900) -
Bottam Reinf. 16 2 3.5 1 -
SIDE FACE REINF 8 2 3.5 2 14.000
Stirrups 8 19 2.23 1 125 43.223
EOS link 8 3 0.82 2 4.932
-
14 B15 (230X900) canti -
Bottam Reinf. 25 2 3.775 1 -
Top Reinf. 25 2 6.675 1 -
SIDE FACE REINF 8 2 2.335 2 9.340
Stirrups 8 20 2.23 1 125 43.847
PIN 25 6 0.19 1 -
EOS link 8 3 0.82 1 2.466
-
15 B16 (230X900) -
Bottam Reinf. 16 2 3.42 1 -
Top Reinf. 10 2 4.28 1 -
EOS left 12 2 1.87 1 -
EOS RIGHT 12 2 2.592 1 -
SIDE FACE REINF 8 2 3.42 2 13.680
Stirrups 8 5 2.23 2 200 22.726
Stirrups 8 2 2.23 1 250 5.080
PIN 25 2 0.19 1 -
EOS link 8 3 0.97 2 5.832
-
16 B17 (230X600) -
Bottam Reinf. 25 2 4.345 1 -
Bottam Reinf. 16 2 4.345 1 -
Top Reinf. 25 2 4.378 1 -
Stirrups 10 25 1.68 1 125 -
PIN 25 4 0.19 1 -
EOS link 10 3 0.82 2 -
-
17 B18 (230X600) -
Bottam Reinf. 25 2 5.171 1 -
Bottam Reinf. 16 1 5.171 1 -
Top Reinf. 25 2 5.171 1 -
Top Reinf. 16 1 5.171 1 -
Stirrups 10 35 1.63 1 125 -
EOS link 10 3 0.82 2 -
-
18 B18A (230X600) -
Bottam Reinf. 16 3 3.0 1 -
Top Reinf. 16 3 3.0 1 -
Stirrups 8 21 1.63 1 100 34.188
EOS link 8 3 0.77 2 4.632
-
19 B19 (230X900) -
Bottam Reinf. 16 4 5.0 1 -
Top Reinf. 12 2 5.0 1 -
EOS left 16 2 2.47 1 -
SIDE FACE REINF 8 2 5.0 2 20.000
Stirrups 8 11 2.23 2 150 50.996
Stirrups 8 5 2.23 1 200 11.883
PIN 25 4 0.19 1 -
EOS link 8 3 0.87 2 5.232
-
20 B20 (230X900) CANTI -
Bottam Reinf. 16 2 2.985 1 -
top reinf 25 2 4.36 1 -
SIDE FACE REINF 8 2 1.375 2 5.500
Stirrups 8 10 2.23 1 150 22.354
EOS link 8 3 0.87 1 2.616
-
21 B21,23,22,24 (230X430) -
Bottam Reinf. 25 2 4.625 2 -
Top Reinf. 25 2 3.395 2 -
Stirrups 10 19 1.34 2 100 -
PIN 25 3 0.19 2 -
-
23 B26 (230X900) -
Bottam Reinf. 16 2 4.143 1 -
Top Reinf. 10 2 5.1 1 -
EOS Right 16 2 2.705 1 -
SIDE FACE REINF 8 2 4.143 2 16.572
Stirrups 8 9 2.23 2 150 41.391
Stirrups 8 4 2.23 1 200 8.281
PIN 25 2 0.19 1 -
EOS link 8 3 0.87 2 5.232
-
24 B27 (230X600) -
Bottam Reinf. 25 2 5.21 1 -
Bottam Reinf. 16 1 5.21 1 -
Top Reinf. 25 2 5.21 1 -
Top Reinf. 16 1 5.21 1 -
Stirrups 10 35 1.63 1 125 -
EOS link 10 3 0.82 2 -
-
25 B27A (230X600) -
Bottam Reinf. 16 3 3.0 1 -
Top Reinf. 16 3 3.0 1 -
Stirrups 8 21 1.63 1 100 34.188
EOS link 8 3 0.77 2 4.632
-
26 B28 (230X900) -
Bottam Reinf. 25 3 6.58 1 -
Top Reinf. 25 3 6.58 1 -
SIDE FACE REINF 8 2 6.58 2 26.320
Stirrups 10 45 2.23 1 125 -
PIN 25 2 0.19 1 -
EOS link 8 3 0.82 2 4.932
-
27 B29 (230X900) CANTI -
Bottam Reinf. 16 3 3.39 1 -
top reinf 25 3 5.19 1 -
SIDE FACE REINF 8 2 2.55 2 10.200
Stirrups 8 15 2.23 1 125 33.955
EOS link 8 3 0.82 1 2.466
-
28 B33 (230X900) CANTI -
Bottam Reinf. 16 3 3.24 1 -
top reinf 25 3 5.04 1 -
SIDE FACE REINF 8 2 2.38 2 9.520
Stirrups 8 15 2.23 1 125 34.311
EOS link 8 3 0.82 1 2.466
-
29 B30 (230X900) -
Bottam Reinf. 12 2 3.995 1 -
Top Reinf. 10 2 4.855 1 -
EOS left 12 1 2.18 1 -
SIDE FACE REINF 8 2 3.995 2 15.980
Stirrups 8 7 2.23 2 200 29.224
Stirrups 8 3 2.23 1 250 7.679
EOS link 8 3 0.97 2 5.832
-
30 B31 (230X900) -
Bottam Reinf. 16 2 3.35 1 -
Bottam Reinf. 12 1 3.35 1 -
Top Reinf. 10 2 3.35 1 -
EOS left 16 2 2.378 1 -
EOS Right 16 2 1.982 1 -
SIDE FACE REINF 8 2 3.35 2 13.400
Stirrups 8 5 2.23 2 200 22.651
Stirrups 8 2 2.23 1 250 5.050
EOS link 8 3 0.97 2 5.832
-
31 B31A (230X900) -
Bottam Reinf. 12 2 3.195 1 -
Top Reinf. 10 2 3.195 1 -
EOS RIGHT 16 1 2.79 1 -
SIDE FACE REINF 8 2 3.045 2 12.180
Stirrups 8 4 2.23 2 200 19.272
Stirrups 8 2 2.23 1 250 3.698
EOS link 8 3 0.97 2 5.832
-
32 B32 (230X900) -
Bottam Reinf. 16 4 5.62 1 -
Top Reinf. 12 2 5.62 1 -
Top Reinf. 16 1 5.62 1 -
SIDE FACE REINF 8 2 5.62 2 22.480
Stirrups 8 11 2.23 2 150 48.224
Stirrups 8 6 2.23 1 200 14.185
EOS link 8 3 0.87 2 5.232
-
C SLAB -
1 S3 200 MM THK -
MAIN BAR at beam d=900mm 12 28 8.36 1 0.115 -
MAIN BAR at beam d=900mm 12 28 8.36 1 0.115 -
MAIN BAR at beam d=600mm 12 36 8.12 1 0.115 -
MAIN BAR at beam d=600mm 12 36 8.12 1 0.115 -
DISTR. BAR 8 32 8.67 1 0.2 276.140
DISTR. BAR 8 32 8.91 1 0.2 283.784
distr. Bar in L/4=1542 8 6 7.485 4 0.25 184.730
distr. Bar in l=600 8 3 6.170 2 0.25 41.956
-
2 S4 165 MM THK -
A PORTION (S4=165) -
Main Bar top steel 10 26 3.873 4 0.115 -
Main Bar at triangle bottom steel 10 26 3.794 2 0.115 -
distr. Bar at triangle front bttm. 8 22 3.135 1 0.25 69.221
distr. Bar at triangle front 8 22 3.135 1 0.25 69.221
distr. Bar in l=0.600 8 3 4 4 0.25 54.400
-
B PORTION (S4=165) -
Main Bar(3.85+1.375) 10 46 4.585 1 0.115 -
distr. Bar in l=0.600 8 3 5.225 1 0.25 17.974
-
C PORTION (S4=165) -
Main Bar 10 23 5.916 1 0.115 -
distr. Bar in l=600 8 3 3.7 1 0.25 12.580
-
D PORTION (S4=165) -
Main Bar 10 13 7.058 1 0.115 -
Main Bar 10 13 8.220 1 0.115 -
-
E PORTION (S4=165) -
Main Bar 10 21 5.959 1 0.115 -
distr. Bar in l=0.6 8 3 3.7 1 0.25 12.580
distr. Bar 8 13 17.064 1 0.25 221.832
distr. Bar 8 12 8.99 1 0.25 107.880
1.6
- 9.520 - - - - 1.85
- 10.340 - - - - 2.1
- - - - - - 2.6
- - - - - - 2.85
- - - - - - 2.6
- - - - - - 2.85
- 5.610 - - - - 3.1
- 5.610 - - - - 3.6
- - - - - - 3.85
- - - - - - 3.6
- - - - - - 3.85
- - - - - - 4.1
- 8.890 - - - - 4.6
- 9.710 - - - - 4.85
- - - - - - 4.6
- - - - - - 4.85
5.1
- - - - - - 5.6
- - - - - - 5.6
- - - - - - 5.85
- 9.520 - - - - 6.1
- 10.340 - - - - 6.35
- - - - - - 6.6
- - - - - -
- - - - - -
- - - - - -
- 5.610 - - - - 98.65
- 5.610 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 11.940 - - - -
- 12.760 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 13.180 - - -
- 13.180 - - - -
- 14.820 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 8.880 - - -
- 7.480 - - - -
- - - - - -
- - - - - -
- - - - - -
- - 11.380 - - -
- 14.740 - - - -
- - 11.520 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - 26.360
- - - - - 15.300
- - - - 7.650 -
- 108.095 - - - -
- - - - 1.520 -
- - - - - -
- - - - - -
- - - - - -
- - - - 13.180 -
- - 6.590 - - -
- 15.300 - - - -
- - 5.593 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 11.380 - - -
- 5.690 - - - -
- 11.380 - - - -
- - 7.607 - - -
- - 6.573 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 0.760 -
- - - - - -
- - - - - -
- - - - - -
- - 26.360 - - -
- 16.540 - - - -
- - 12.427 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 0.760 -
- - - - - -
- - - - - -
- - - - - -
- - 11.380 - - -
- 14.740 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 11.380 - - -
- 5.690 - - - -
- 14.740 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 8.330 - - -
10.010 - - - - -
- - 2.168 - - -
- - 2.485 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 6.260 - - - -
6.260 - - - - -
- - 2.197 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 8.120 - - -
- 8.120 - - - -
- - 2.095 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 5.650 - - - -
5.650 - - - - -
- - 2.033 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 7.000 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 7.550 -
- - - - 13.350 -
- - - - - -
- - - - - -
- - - - 1.140 -
- - - - - -
- - - - - -
- - - - - -
- - 6.840 - - -
8.560 - - - - -
- 3.740 - - - -
- 5.184 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 0.380 -
- - - - - -
- - - - - -
- - - - - -
- - - - 8.690 -
- - 8.690 - - -
- - - - 8.756 -
41.900 - - - - -
- - - - 0.760 -
4.932 - - - - -
- - - - - -
- - - - - -
- - - - 10.342 -
- - 5.171 - - -
- - - - 10.342 -
- - 5.171 - - -
56.602 - - - - -
4.932 - - - - -
- - - - - -
- - - - - -
- - 9.000 - - -
- - 9.000 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 20.000 - - -
- 10.000 - - - -
- - 4.933 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 0.760 -
- - - - - -
- - - - - -
- - - - - -
- - 5.970 - - -
- - - - 8.720 -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 18.500 -
- - - - 13.580 -
51.703 - - - - -
- - - - 1.140 -
- - - - - -
- - - - - -
- - 8.286 - - -
10.200 - - - - -
- - 5.410 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 0.380 -
- - - - - -
- - - - - -
- - - - - -
- - - - 10.420 -
- - 5.210 - - -
- - - - 10.420 -
- - 5.210 - - -
56.980 - - - - -
4.932 - - - - -
- - - - - -
- - - - - -
- - 9.000 - - -
- - 9.000 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - 19.740 -
- - - - 19.740 -
- - - - - -
99.904 - - - - -
- - - - 0.380 -
- - - - - -
- - - - - -
- - - - - -
- - 10.170 - - -
- - - - 15.570 -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 9.720 - - -
- - - - 15.120 -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 7.990 - - - -
9.710 - - - - -
- 2.182 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 6.700 - - -
- 3.350 - - - -
6.700 - - - - -
- - 4.757 - - -
- - 3.963 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 6.390 - - - -
6.390 - - - - -
- - 2.788 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - 22.480 - - -
- 11.240 - - - -
- - 5.620 - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- 231.157 - - - -
- 231.157 - - - -
- 289.451 - - - -
- 289.451 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
401.393 - - - - -
198.938 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
212.903 - - - - -
- - - - - -
- - - - - -
- - - - - -
135.554 - - - - -
- - - - - -
- - - - - -
- - - - - -
90.674 - - - - - 116 115
105.609 - - - - -
- - - - - -
- - - - - -
126.170 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
101.808 - - - - -
128.798 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
69.365 - - - - -
48.375 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
110.059 - - - - -
- - - - - -
- - - - - -
202.257 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
56.161 - - - - -
39.161 - - - - -
- - - - - -
- - - - - -
- - - - - -
72.054 - - - - -
80.487 - - - - -
- - - - - -
- - - - - -
- - - - - -
139.894 - - - - -
- - - - - -
- - - - - -
- - - - - -
71.245 - - - - -
76.501 - - - - -
- - - - - -
- - - - - -
- - - - - -
90.121 - - - - -
70.358 - - - - -
- - - - - -
- - - - - -
187.717 - - - - -
181.167 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
66.530 - - - - -
50.870 - - - - -
84.439 - - - - -
61.486 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
1120.660 - - - - -
739.347 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
396.054 - - - - -
262.711 - - - - -
73.039 - - - - -
53.200 - - - - -
- - - - - -
- - - - - -
73.980 - - - - -
95.200 - - - - -
95.140 - - - - -
116.800 - - - - -
- - - - - -
- - - - - -
49.689 - - - - -
34.100 - - - - -
- - - - - -
- - - - - -
- - - - - -
27.600 - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
67.270 - - - - -
43.710 - - - - -
- - - - - -
- - - - - -
- - - - - -
49.400 - - - - -
13.488 - - - - -
- - - - - -
- - - - - -
- - - - - -
324.000 - - - - -
- - - - - -
- - - - - -
7280.8462 1459.18 361.77 0.00 219.65 41.66
4514.1 1298.7 571.6 0.0 847.8 262.9
4.51 1.30 0.57 0.00 0.85 0.26
Name of the projects: AMANORA PARK TOWN sector R-9/10Hadapsar , Pune
Name Of Client: CITY Corporation Ltd, Pune
Name of Contractor : sharp engg.
Name of Work : Plot No.55, B- Type Bungalow
Remark
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
Location:
Quantity
Sr. No. Description Length width Thickness No. cum
PROVIDING AND LAYING
POLYTHENE SHEET BELOW P.C.C
Total= 62.780
checked
Remarks
sqm
SHAARP PERCITUS FABTECH PVT. LTD.
SITE NAME- Amnora, R9/10 Sector , Bunglow No- 55
Bunglow no-55 grade slab plastik paper work.
Brickwork summary
Sr. No. Description Unit Up to date Pre paid This bill Remark
Quantity Quantity Quantity