Beruflich Dokumente
Kultur Dokumente
) نود اعالمكم ان المواد الداخلة في اإلمتحان2019 -2018( الى المتقدمين للدراسات العليا للعام الدراسي
:التنافسي للماجستير و الدكتوراه مع المصادر هي كالتالي
: دراسة الماجستير
: هندسة المواد المعدنية- 1
-Materials science and engineering an introduction, William D. Callister and David G.
Rethwisch, 8th edition, 2009. Chapter (2,3,4,5,6,7,8,9,10 ,11,17)
- Materials Science, S.L. Kakani and Amit Kakani, 2004, Chapter (2,3,4,7,8,9 ,10, 11,12).
: هندسة المواد الالمعدنية- 2
-Materials science and engineering an introduction, William D. Callister and David G.
Rethwisch, 8th edition, 2009. Chapters 14, 15.
-Materials Science, S.L. Kakani and Amit Kakani, 2004, Chapter( 3,8,13,14 ,15, 16.
: طرق التصنيع- 3
-S. Kalpakjian, S. Schmid, "Manufacturing Engineering and Technology", 5 th edition Prentice Hall
publishing Co., 2006.
: اختيار المواد- 4
th
- Ashby, "Materials selection in mechanical design", 4 edition, 2011, Butterworth
Heinemann & Elsevier. Chapters 1,2,3,4,5,13,15,16.
:فحص المواد-5
-Veron John, "Testing of Materials", Macmillan Education LTD, First edition, 1992.
-Barry Hull and Veron John, "Non- destructive inspection", Macmillan Education, first edition, 1988
-Al-Haidary, Jafer. T., "Engineering Materials Tests", Al- Moaataz for Bublishing, first edition, 2005.
، دار دجلة،" "المواد الهندسية و اختباراتها، عبد الجواد دمحم الشريف، عادل محمود حسن. د، قحطان خلف الخزرجي.د. أ-
.9002 ، الطبعة األولى.المملكة األردنية الهاشمية
: المواد المتراكبة- 6
-Materials science and engineering an introduction, William D. Callister and David G. Rethwisch, 8 th
edition, 2009. Chapter (16).
-Engineering Materials Technology, W.Bolton, 3rd edition, 1998, Part 3 (Materials of Engineering)
Chapter 14 & Part 4(Manufacturing of Processes) Chapter 18.
: مقاومة المواد- 7
- Strength of Materials, R.S. Khurmi, N. Khurmi, 2008. Chapter 2: simple stresses and strains,
Chapter 3: stresses and strains in Bars of varying sections, Chapter 13: Bending moment and
shear force, Chapter 14: Bending stresses in simple beams, Chapter 19: Deflection of beams.
1
:دراسة الدكتوراه
: هندسة المواد المعدنية- 1
-Materials science and engineering an introduction, William D. Callister and David G. -
Rethwisch, 8th edition, 2009. Chapter (2,3,4,5,6,7,8,9,10 ,11,17)
- Materials Science, S.L. Kakani and Amit Kakani, 2004, Chapter (2,3,4,7,8,9 ,10,11,12). -
-
-Phase Transformations in Metals and Alloys, David A. Portar, Kenneth E. Easterling, and Mohamed Y.
Sherif, CRC Press., 2009.
:اختيار المواد- 5
- Materials Science, S.L. Kakani and Amit Kakani, 2004, Chapter ( 1, 8, 13, 14, 17, 18).
:هندسة السطوح- 8
-Surface Engineering for Corrosion and Wear Resistance, J.R. Davis, Davis Associates, 2001.
Chapters (4,5,6).
:التحوالت الطورية و المعامالت الحرارية- 9
-Materials science and engineering an introduction, William D. Callister and David G. Rethwisch, 9TH
edition, 2014,chapter (5,10,11).
2
:المواد المتراكبة- 11
-Materials science and engineering an introduction, William D. Callister and David G. Rethwisch, 8 th
edition, 2009. Chapter (16).
-Engineering Materials Technology, W.Bolton, 3rd edition, 1998, Part 3 (Materials of Engineering)
Chapter 14 & Part 4(Manufacturing of Processes) Chapter 18.
:هندسة التآكل- 11
-Principles of Corrosion Engineering and Corrosion Control, Zaki Ahmed, 2006.