Beruflich Dokumente
Kultur Dokumente
2 3 4
DAV-TZ145 GB
Playable Discs Note on playback operations of a DVD Playable Types of Files It may take time to read files in the Unpacking
Some playback operations of a DVD may be following cases:
intentionally restricted by software producers. Video there are many folders or files. Checking the supplied items
DVD DVD-VIDEO
Since this system plays a DVD according to File format Extensions the memory capacity of the USB device Main unit (1) Speakers (5) Remote commander
DVD-ROM the disc contents the software producers that you are using is very large. (remote) (1)
DVD-R/DVD-RW designed, some playback features may not be
MPEG4 Video1) “.mp4,” “.m4v”
the memory of the USB device that you
DVD+R/DVD+RW available. Xvid Video2) “.avi” are using is fragmented.
CD CD-DA (Music CD) Note about double-layer DVDs Music
CD-ROM The playback picture and sound may be File format Extensions
CD-R/CD-RW momentarily interrupted when the layers
VIDEO CD switch. MP3 (MPEG1 Audio “.mp3” Subwoofer (1) FM wire antenna (aerial) (1) High Speed HDMI cable* (1)
Super VCD Layer 3)3)
Region code (DVD VIDEO only)
A CD or DVD will not play if it has not been WMA4) “.wma”
Your system has a region code printed on the
correctly finalized. For more information, rear of the unit and will only play a DVD AAC 5) “.m4a”
Video cord* (1)
refer to the operating instructions supplied VIDEO (playback only) labeled with an
Photo
with the recording device. identical region code or ALL .
File format Extensions
Discs that cannot be played Note about Multi Session CD
Blu-ray Discs You can play only the first session of a JPEG “.jpg,” “.jpeg,” “.jpe”
HD DVDs multisession disc. 1) AVC is not compatible. Operating Instructions
DVD-RAMs 2) Unavailable on US models. (this manual)
DVD Audio discs 3) MP3PRO format is not compatible. * High Speed HDMI cable and video cord are included only in certain areas.
PHOTO CDs 4) WMA DRM,WMA Lossless or WMA
Super Audio CDs PRO format are not compatible. Preparing the remote control
Data track of CD-Extras 5) AAC DRM and AAC Lossless formats are Insert two R6 (size AA) batteries (not supplied) by matching the and ends on the batteries
Audio material side on DualDiscs not supported. to the markings inside the compartment.
DVD-R/DVD-RW/DVD+R/DVD+RW in Note
VR (Video Recording) mode Some files may not play depending on the
CPRM (Content Protection for Recordable format, the encoding, or recording
Media)-compatible DVD-R/RW containing condition.
content flagged as “Copy once.” Some USB devices may not work with this
Notes on discs system.
This product is designed to playback discs The system supports ISO 9660 Level 1/
that conform to the Compact Disc (CD) Level 2, or Joliet in DATA CD.
standard. DualDiscs and some music discs The system supports UDF (Universal Disk
encoded with copyright protection Format) in DATA DVD.
technologies do not conform to the Compact The system supports FAT12, FAT16, and
Disc (CD) standard. Therefore, these discs FAT32 on USB device.
may not be compatible with this product. The system can recognize the following files
or folders in DATA DVD, DATA CD and
USB device:
up to 300 folders
up to 648 files
5 6 7 8
Connecting the Speakers Connecting your TV *1 Supplied only in certain areas. This is the When Installing the 2 Fasten the screws to the wall, then
basic connection via video cord (yellow). hang the speaker on the wall.
Caution Depending on the jacks on your TV or set-top box, select the video and audio connection method. *2 Supplied only in certain areas. Picture Speakers on a Wall
Do not use any speakers other than those supplied with this system. quality will be improved compared to a Caution Depth of fastened screw
Insert the speaker cords to match the color of the SPEAKERS terminals of the unit. When connecting to a TV only When connecting a TV and set-top box/PlayStation®3 video cord.
The TV has AUDIO OUT jacks*4: The TV has AUDIO OUT jacks: The TV does not have AUDIO OUT jacks: Contact a screw shop or installer for
*3 Sold separately. To listen to TV audio via information regarding the wall material or
the system, connect with an audio cord screws to be used.
Rear panel of the main unit Audio
Video (red and white).
Use screws that are suitable for the wall 7 to 9 mm
Speaker cord Set-top box/ Set-top box/ * If your TV does not have AUDIO OUT
4
material and strength. As a plaster board
Contact area (+) Video PS3™ PS3™ jacks, TV sound does not output via this wall is especially fragile, attach the screws
system. securely to a beam. Install the speakers on a
Covering
vertical and flat wall where reinforcement is
Colored tube Video Audio Video Audio Video Audio Connecting the FM wire antenna applied.
(aerial) Sony is not responsible for accidents or
damage caused by improper installation,
insufficient wall strength or improper screw
Contact area (–) Connecting a video cord and an audio cord installation, natural calamity, etc.
Blue Select *1 or *2 for the video connection based on the jacks on the TV.
Colored tube 1 Prepare screws (not supplied) that are
Gray Green FRONT LEFT: White suitable for the hole on the back of
Audio Video
White Purple FRONT RIGHT: Red each speaker. See the illustrations
Red CENTER: Green FM
below.
US E 8Ω NNA
IM PEDA
NCE SURROUND LEFT: Blue ANTE
4 mm
SURROUND RIGHT: Gray
SUBWOOFER: Purple 30 mm
ER FER
CENT SUBWOO
Note
OUND
SURR LEFT VIDEO IN HDMI IN AUDIO OUT VIDEO IN HDMI IN AUDIO OUT VIDEO IN HDMI IN AUDIO OUT
KERS
T
ONT FT RIGH
L R L R L R
SPEA Hole on the back of the speaker
FR LE
SUR R
SUR L
9 10 11 12
17 18 19 20
Convenient Functions To cancel the sleep timer function Using the Setup Display [4:3 Letter Box]: Displays a wide picture with [Screen Saver] [SR]: Adjusts the sound level of right [Audio DRC] [Parental]
Press and hold SHIFT, then press SLEEP black bands on the top and bottom. [On]: The screen saver image appears if you surround speaker. It is possible to adjust the You can compress the dynamic range of a You can restrict playback of DVDs that have
repeatedly until “OFF” appears in the front You can make various adjustments to items parameter from -6.0 dB to +6.0 dB. DVD VIDEO sound track. (Dolby Digital ratings. Scenes may be blocked or replaced
About the Control for HDMI do not operate the system for about 15
panel display. such as picture and sound. [SL]: Adjusts the sound level of left surround only) with different scenes.
minutes.
function (“BRAVIA” Sync) Displayed items vary depending on the
[Off]: Off. speaker. It is possible to adjust the parameter [Off]: No compression of dynamic range. 1 Press / to select a rating level from
You can control a TV compatible with the To view information about the country model. from -6.0 dB to +6.0 dB. [Standard]: The system reproduces the sound 1 to 8 or [Off], then press .
The default setting is underlined. [Last Memory]
Control for HDMI function by connecting it disc [SW]: Adjusts the sound level of subwoofer. It track with the kind of dynamic range that the
to the system via an HDMI cable. 1 Press DVD/CD, then eject the disc. [4:3 Pan Scan]: Displays a full-height picture
This system recalls the point where you is possible to adjust the parameter from -6.0 recording engineer intended. 2 Press and hold SHIFT, then press the
You can check the playing time and stopped the disc the last time it was played number buttons to enter your 6-digit
on the entire screen, with trimmed sides. dB to +6.0 dB.
Available features remaining time of the current title, chapter, 2 Press SETUP. and resumes playback from that point the Video Setup Page password.
One-Touch Play or track. The setup menu appears. next time you insert the same disc. [Distance]
If you move one of the speakers, be sure to [Default]
With one touch of ONE-TOUCH PLAY on Press and hold SHIFT, then press TIME 3 Press / to select one of the setup [On]: The system stores the resume points in [HDMI Resolution]
set the parameters of the distance from the This feature enables you to reset all the setup
the remote control, the system and your repeatedly. menu categories, then press . memory. You can select the type of video signal that is
listening position to speakers. menu options and your personal settings to
TV automatically turn on and the TV’s Each time you press and hold SHIFT, then [Off]: The system does not store the resume output from the HDMI OUT jack.
input is switched to the system; playback of press TIME while playing the disc, the 4 Press / to select a setup item, then [L/R]: Adjusts the distance of the left/right [Auto]: The system outputs the optimal video
the factory defaults, except for your password
points in memory. Playback restarts at the for the [Password] and [Parental] items.
a disc starts automatically. displayed item changes depending on the press or . speakers. It is possible to adjust the parameter
[OSD Lang] (On-Screen Display) resume point only for the current disc in the signal for the connected TV.
5 Select the option you wish to change from 1.0 m to 7.0 m. Press to confirm the default reset.
System Power Off disc. You can switch the display language on the unit. [480p/576p]: The system outputs 720 × 480p*
When you turn the TV off by using the / and press to confirm and go back TV screen. [C]: Adjusts the distance of the center or 720 × 576p* video signals.
Note Password Setup Page
button on the TV’s remote control or TV to the previously selected item. speaker. This parameter can be set between [720p]: The system outputs 1280 × 720p*
[Control for HDMI] When the resume playback memory is full,
/ on the system’s remote control, the 6 Press SETUP to turn off the menu. 1.6 m shorter and equal to the L/R channel video signals. [Password]
This function is available when you connect the resume playback point for the earliest
system turns off automatically. Selected category Setup categories setting. [1080i]: The system outputs 1920 × 1080i* The default password is “000000.” To change
the system and a TV that is compatible with disc is deleted.
System Audio Control [SL/SR]: Adjusts the distance of the left/right video signals. the password:
You can switch the audio output to either the Control for HDMI function via an HDMI [Auto Standby] surround speaker. This parameter can be set [1080p]: The system outputs 1920 × 1080p* 1 Press and hold SHIFT, then press the
the TV speakers or this system’s speakers cable. [On]: Enters standby mode automatically between 5.0 m shorter and equal to the L/R
-- General Setup Page -- video signals. number buttons to enter “000000” or
via the TV’s menu. [On]: You can operate mutually between when in stop, pause, no disc, or eject mode channel setting.
TV Display 16:9 16:9 * i: interlace, p: progressive your last set 6-digit password in the
OSD Lang ENG 4:3 Letter Box
components that are connected via an HDMI for more than 30 minutes.
cable. [Center Speaker] [Old Password] section.
Sleep timer Control for HDMI On 4:3 Pan Scan [Off]: The unit does not enter standby mode
[On]: Activates the center speaker. Preference Page
You can set the system to turn off at a preset
HDMI Audio
Screen Saver
Off
On
[Off]: Off. automatically.
[Off]: Deactivates the center speaker.
2 Press and hold SHIFT, then press the
[HDMI Audio] [TV Type] number buttons to enter a new 6-
time, so you can fall asleep listening to music. Last Memory On
Auto Standby On This setting is only required if you are using Speaker Setup Page [Sur. Speaker] The TV type default setting varies depending digit password in the [New Password]
Press and hold SHIFT, then press SLEEP. [On]: Activates the surround speakers. on the area.
the HDMI OUT jack for an audio section.
Each time you press this button, the minute [Level] [Off]: Deactivates the surround speakers. [PAL]: For a PAL-system TV.
display (the remaining time) changes by 10 Selected setting Options
connection. You can adjust the sound level of all the [NTSC]: For an NTSC-system TV.
3 Press and hold SHIFT, then press the
minutes. [Off]: Turns off HDMI audio output. You can speakers and the subwoofer. [Test Tone] number buttons to enter the new 6-
A countdown of the last 20 seconds until the still enjoy sound output via the speaker [L]: Adjusts the sound level of left speaker. It The speakers will emit a test tone to set the [Audio] digit password again in the [Confirm
General Setup Page system. is possible to adjust the parameter from -6.0 Level. You can select the preferred audio language PWD] section to confirm your entry.
unit turns off appears in the front panel
[All]: The HDMI audio output format will be [On]: The speakers emit the test tone. for DVDs with multiple sound tracks.
display. [TV Display] dB to +0.0 dB. 4 Press [OK] to exit the menu.
same as the audio stream being played. If the [C]: Adjusts the sound level of center speaker. [Off]: The speakers do not emit the test tone. [Subtitle]
To check the remaining time [16:9]: Select this when you connect a wide-
playback audio format is not supported, the It is possible to adjust the parameter from Tip You can switch the language of the subtitles
Press and hold SHIFT and SLEEP for 3 screen TV or a TV with a wide mode
audio output will be changed to PCM -6.0 dB to +6.0 dB. To adjust the volume of all speakers, press recorded on a DVD VIDEO.
seconds. The remaining time until the unit function.
automatically. [R]: Adjusts the sound level of right speaker. VOLUME +/– on the unit or on the remote
turns off appears in the front panel display. [PCM]: HDMI audio output will be [Disc Menu]
It is possible to adjust the parameter from control.
downmixed to linear PCM (2-channel). You can switch the language for a disc’s
-6.0 dB to +0.0 dB. Press /// repeatedly to select the
menu.
speaker and the desired level or distance.
21 22 23 24
Precautions On cleaning discs, disc/lens cleaners This system can only play back a standard Troubleshooting Picture Operation A JPEG image file cannot be played. USB device
Do not use cleaning discs or disc/lens circular disc. Using neither standard nor It is larger than 2,048 (width) × 1,536
On placement cleaners (including wet or spray types). circular discs (e.g., card, heart, or star shape) If you experience any of the following There is no picture. “PROTECT” appears in the front panel (height) in normal mode, or more than “OVERLOAD“ appears in the front panel
These may cause the apparatus to may cause a malfunction. difficulties while using the system, use this The video connecting cords are not display. 2,000,000 pixels in progressive format display.
At high volume, over long periods of time,
the cabinet becomes hot to the touch. This malfunction. Do not use a disc that has a commercially troubleshooting guide to help remedy the connected securely. Connect all channels to their which is mainly used on Internet Web Remove the USB device from the
is not a malfunction. However, touching available accessory attached, such as a label problem before requesting repairs. Should The unit is not connected to the correct corresponding SPEAKERS terminals sites. (USB) port. Make sure there is no
On your TV’s color any problem persist, consult your nearest
the cabinet should be avoided. Do not place or ring. TV input jack. correctly. A video file cannot be played. problem with the USB device.
the system in a confined space where IMPORTANT NOTICE Sony dealer. The system is not selected via the video Press / to turn off the system, and
On heat radiation The video file resolution is larger than The USB device is not recognized.
ventilation is poor as this may cause Caution: This system is capable of holding Note that if service personnel changes some input of the TV. check the following items after
a still video image or on-screen display
Due to the slim type of main unit design, you
parts during repair, these parts may be 720 (width) × 576 (height). The system supports FAT12, FAT16, and
overheating. may feel some heat on the top of the unit. Check the output method on your system. “STANDBY” disappears: FAT32 on USB device.
image on your television screen retained. Are the + and – speaker cords short- The name of a folder or file is not
Do not install the system near heat sources This is normal. Please consult your nearest Even though you set the aspect ratio in
indefinitely. If you leave the still video circuited? displayed correctly. The USB device (audio file/JPEG image
such as radiators or air ducts, or in a place Sony dealer if you have any questions. [TV Display] of [General Setup Page], the
subject to direct sunlight, excessive dust, image or on-screen display image Power Is anything blocking the ventilation The system can only display numbers and file) cannot be played.
picture does not fill the TV screen.
mechanical vibration, or shock. displayed on your TV for an extended holes of the system? letters of the alphabet. Other characters Files that are encrypted or protected by
The power is not turned on. The aspect ratio on the disc is fixed. passwords, etc., cannot be played.
period of time you risk permanent are displayed as [_].
Do not install the system in an inclined Check that the AC power cord (mains After checking the above items and fixing
damage to your television screen. Color irregularity occurs on the TV any problems, turn on the system. A disc does not start playing from the There is no playable file in the USB
position. It is designed to be operated in a lead) is connected securely.
Projection televisions are especially screen. If the cause of the problem cannot be beginning. device.
horizontal position only.
susceptible to this. The system’s speakers contain magnet found even after checking all the above
Do not place heavy objects on the system. Sound parts, so magnetic distortion may occur.
Resume Play has been selected.
On operation
items, consult your nearest Sony dealer. During stop, press and then start
On moving the system The sound doesn’t output from the When color irregularity occurs on the TV playback.
If the system is brought directly from a cold Before moving the system, make sure that screen, check the following items. A disc cannot be ejected and “LOCKED”
surround speakers. Program play has been selected. During
to a warm location, or is placed in a very there is no disc inserted, and remove the AC appears in the front panel display.
Press SURROUND repeatedly and select Install the speakers at least 0.3 meters stop, press and then start playback.
damp room, moisture may condense on the power cord (mains lead) from the wall outlet “MULTI” (A.F.D. MULTI) to output from your TV set. Contact your Sony dealer or local
lenses inside the unit. Should this occur, authorized Sony service facility. Shuffle play has been selected. During
(mains). sound from all speakers. If the color irregularity persists, turn off stop, press and then start playback.
the system may not operate properly. In (Depending on the media, sound may the TV set once, then turn it on after 15 Radio stations cannot be tuned in.
On handling discs The system does not work normally.
this case, remove the disc and leave the not be output from the surround to 30 minutes. Check that the antenna (aerial) is
system turned on for about half an hour To keep the disc clean, handle the disc by Disconnect the AC power cord (mains
its edge. Do not touch the surface. speakers.) Reposition the speakers farther away connected securely. Adjust the antenna
until the moisture evaporates. from your TV set. (aerial) or connect an external antenna lead) from the wall outlet (mains), then
Do not stick paper or tape on the disc. The [Speaker Setup Page] items cannot reconnect after several minutes.
If anything falls into the cabinet, unplug (aerial) if necessary.
the unit and have it checked by qualified Do not expose the disc to direct sunlight or be changed. The [TV Type] setting does not match
heat sources such as hot air ducts, or leave your TV. A disc does not play. The Control for HDMI function does not
personnel before operating it any further. Press DVD/CD, then eject the disc.
it in a car parked in direct sunlight as the [TV Type] can be reset according to the work.
There is no sound. Severe hum or noise is The region code on the DVD does not
On cleaning temperature may rise considerably inside following procedure: match the system. Set the [Control for HDMI] setting in
heard. [General Setup Page] to [On].
Clean the cabinet, panel, and controls with the car. ress to take out the disc.
1. P Moisture has condensed inside the unit
a soft cloth slightly moistened with a mild Remove the speaker cords from the Make sure that the connected component
On cleaning discs 2. Press DISPLAY. and may cause damage to the lenses.
detergent solution. Do not use any type of SPEAKERS terminals, straighten and is compatible with the Control for HDMI
3. Press . Remove the disc and leave the unit turned
abrasive pad, scouring powder, or solvent Before playing, clean the disc with a extend the contact area of each speaker function.
cleaning cloth. [TV Type] will be reset. on for about half an hour.
such as alcohol or benzine. cord, then reconnect the speaker cords to Check the connected component’s setting
Wipe the disc from the center out. the SPEAKERS terminals. A DATA CD/DATA DVD cannot be played. for the Control for HDMI function. Refer
If you have any questions or problems
concerning your system, please consult Do not use solvents such as benzine, Clean the disc. The DATA CD is not recorded in ISO to the operating instructions supplied
thinner, commercially available cleaners, or 9660 Level 1/Level 2, or Joliet. with the component.
your nearest Sony dealer. The sound loses stereo effect when you
anti-static spray intended for vinyl LPs. The DATA DVD is not recorded in UDF
play a VIDEO CD or CD.
(Universal Disk Format).
Set the audio setting to [Stereo] by
pressing AUDIO.
25 26 27 28
Specifications Speakers
Front
Amplifier Section
SS-TS122
POWER OUTPUT (rated):
Dimensions (approx.) 92 mm × 119 mm ×
Front L + Front R 36 W + 36 W (at
100 mm (w/h/d) incl.
8 ohms, 1 kHz, 1%
projecting parts
THD)
Mass (approx.) 0.44 kg
POWER OUTPUT (reference):
Front L/Front R/ Center
Center/Surround L/ SS-CT122
Surround R: 60 W Dimensions (approx.) 92 mm × 119 mm ×
(per channel at 100 mm (w/h/d) incl.
8 ohms, 1 kHz) projecting parts
Subwoofer: 60 W (at Mass (approx.) 0.45 kg
8 ohms, 100 Hz) Surround
Inputs SS-TS122
TV/CABLE : Pin jack Dimensions (approx.) 92 mm × 119 mm ×
CD/DVD System 100 mm (w/h/d) incl.
Laser Diode Properties projecting parts
Emission Duration: Mass (approx.) 0.47 kg
Continuous Subwoofer
Laser Output*: Less
SS-WS122
than 44.6 μW
Dimensions (approx.) 160 mm × 315 mm ×
* This output is the value measurement at a
295 mm (w/h/d) incl.
distance of 200 mm from the objective lens
projecting parts
surface on the Optical Pick-up Block with
Mass (approx.) 4.4 kg
7 mm aperture.
General
USB Section
Power requirements 220 V - 240 V AC,
(USB) port:
50/60 Hz
Maximum current: 500 mA
Power consumption On: 38 W
Tuner Section Standby: 0.8 W*
System PLL quartz-locked
digital synthesizer * Valid when the system is in the following
Tuning range 87.5 MHz - 108.0 MHz status:
(50 kHz step) [Control for HDMI] is set to [Off].
Antenna FM lead antenna Dimensions (approx.) 340 mm × 56 mm ×
Video Section 325 mm (w/h/d) incl.
Outputs VIDEO: Pin jack projecting parts
HDMI OUT: HDMI Mass (approx.) 2.2 kg
19-pin
Design and specifications are subject to
change without notice.
29 30 31 32