Beruflich Dokumente
Kultur Dokumente
flV Industries,
1 - r - - - - - - - -....,.-,rJ. Inc.
'
Terms & Conditions 3451 Pegasus Drive
- - - - - - " - - - -Bakersfield. CA 93308 U.S.A.
Call Toll Fre.e· 877) DHV-USA1
Phone: (6 1) 392-~911-8
Fax: (661)'39l '8947
allow the COMPANY to make a valid claim against the carrier of the PRODUCTS for their loss COMPANY HAVE ANY LIABILITY WHATSOEVER FOR ANY CLAIM ARISING FROM OR
or damage. RELATING TO THE ORDERS OR THE PRODUCTS FOR AN AGGREGATE AMOUNT IN Please visit our DHV website: www.dhvindustries.com or www.dhwalve.com for a copy of our API 6D
EXCESS OF THE INVOICED PRICE FOR THE PRODUCTS, monogram certificate. Customer and Project referrals are available upon request. For certified data
(~If the CUSTOMER is responsible for delivery, the COMPANY will not be responsible for delays
or failure to deliver by the carrier set up by the CUSTOMER or due to causes beyond the (c) The COMPANY shall not be liable for any damage resulting from delays, failure of the and current specifications, please contact us or your local DHV agent. Information provided in this
COMPANY control. Delivery of material to a common carrier shall be considered delivery to the PRODUCTS, loss of profit or revenues, loss of time or loss of use, cost of capital, diminution of
catalog is for general purposes only_
Buyer .Claims for loss or any damage to material in trans~ shall be filed by the Buyer direct with goodwill, or claims of CUSTOMER'S customers.
the carrier. Claims for any shortage, corrections or deductions must be madle in writing w~hin
48 hours after receipt of goods. (d) IN NO CIRCUMSTANCES WILL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL,
DHV reserves the right to discontinue the manufacture or change and modify our design and construc-
SPECIAL, PUNITIVE OR INDIRECT LOSS OR DAMAGE WHATSOEVER. tion of any DHV product, in due course of our manufacturing procedure without incurring any obligation
7. PASSING OF RISK AND TITLE, CANCEUATION AND RETURNS
The COMPANY'S liability for the PRODUCTS passes from the COMPANY to the CUSTOMER (e) The COMPANY is not liable if the CUSTOMER'S use of the PRODUCTS infringes on a third
to accept for credit, to replace or furnish or install such changes or modifications on products previously
on the earlier of the following two dates: 1) the date when the PRODUCTS are delivered to the party's patent rights. or subsequently sold.
CUSTOMER, the CUSTOMER'S agent, or a person that the CUSTOMER has authorized to
accept dlelivery, or 2) the agreed date of delivery, ij the CUSTOMER fails to take delivery as (f) Any exclusions or limitations of liability in this CONTRACT in favor of the COMPANY are
required. agreed to be extended for the benefit of all COMPANY'S and/or individuals within the
1
CUSTOMER will be charged for work performed, based on the following schedule. All freight for of any third party's intellectual property rights including but not limited to patent, design right,
return or cancelled/changed goods shall be prepaid by CUSTOMER. registered design, trademark, trade name or copyright and any loss, damage or expense which
• Twenty Five (25%) percent of price on stock items. it may incur by reason of any such infringement or alleged infringement in any county, and
• Fifty (50%) percent of price of stock Hems ordlered in quantities which exceed normal
inventory levels. (c) The CUSTOMER will indemnify COMPANY against any loss, damage or expense in respect
• Twenty Five (25%) percent of price prior to drawing submittal on made to order items. of any liability arising in any country by reasons of the PRODUCTS being made to such
Pressure Class
Introduction TypeC 1 =Class 150
End Connections
2 = Class300 F = Raised Face Flanged End
1= OS & Y Gate
3 = Class600 R = Ring Type Joint Flanged End
Quality is our commitment, while competitive price and timely delivery is our promise. 2 =Globe
3 = Swing Check 4 = Class900 P = Plain Flate Face Flanged End
From the beginning, the DHV name has become associated with quality in every step of our 4 = NRS GATE 5 = Class 1500 B = Butt-welding End
5 = Pressure Seal Bonnet Gate 6 = Class 2500 T = Threaded End
manufacturing process. For the past decades our customers worldwide have trusted us to pro- 6 = Pressure Seal Bonnet Globe - - - - - - , Body and Bonnet Material S = Socket-welding End
7 = Pressure Seal Bonnet Check 0 =ASTM A216 WCB W= Wafer-Type
vide them with consistent and reliable valve products in their most severe and critical service. 8 = Y Pattern
1 =ASTM A216 WCC L = Lug-Tpye or Full Flange
9 =Angle
We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline, 2 = ASTM A352 LCB D =Double Flange-Type
A= Conduit Gate
3 = ASTM A352 LCC X = Other Type End Connection
B = Plug Valve
Petrochemical and Power Plant. 4=ASTM A351 CF8M r-----------------
C =Strainer
D = Soft Seat Block & Bleed Gate 5 =ASTM A351 CF8 Conduit Gate &
DHVGate I Globe I Check Valves are designed, manufactured and tested to the latest manufac-
E = API 6D Swing Check 6 =ASTM A351 CF3M Plug Valve Seat Type
turing specifications of the American & International Standards Organizations. We welcome your F = Twin Seal Plug Valve 7 =ASTM A351 CF3
None = Other Valves
G = Parallel Slide Gate 8 = ASTM A890 4A
challenges and look forward to serving your critical project needs. H = Piston Check S =Soft Seal
X= Special
X= Special M = Metal Seal
Type we
o Figure Number System 2 1 = Single-Plate Wafer Check
a-OS & Y Gate valve, class 300,
A216 WCB body & bonnet, raised
2 = Dual-Plate Wafer Check face, flanged end, with HF/ HF
o Gate Valve 3 3 = Lift Wafer Check liim, Gear Operated
o Globe Valve ..................................................................................................................... 6
w
Flange Gasket Features
• OS & Y, Rising Stem
• Flexible Wedge
• Bolted Bonnet
• Renewable Seat Rings Welded or Threaded
• Flanged Ends or Buttwelding Ends
300LB
Flange Gasket
ValveS1ze
Descnpt1on
2 3 4 6 8 10 12 14 16 20 24 30
in 8.50 11.14 12.00 15.88 16.50 18.00 19.75 30.00 33.00 39.00 45.00 55.00
Flanged End L
mm 216 283 305 403 419 457 502 762 838 991 1143 1397
in 8.50 11.14 12.00 15.88 16.50 18.00 19.75 30.00 33.00 39.00 45.00 55.00
Weld End Lt
mm 216 283 305 403 419 457 502 762 838 991 1143 1397
in 17.01 19.61 23.86 33.15 39.45 47.64 54.80 60.55 68.90 84.88 101.85 127.20
Height to Open H
mm 432 498 606 842 1002 1210 1392 1538 1750 2156 2587 3231
in 7.90 9.80 11.80 15.80 17.70 17.70 19.70 23.60 23.60 18.10 24.00 24.00 Ring Type Joint Sprial Wound Gasket Metal Backup
Handwheel Dia W 0!: 600/b 300/b Graphite Gasket
mm 200 250 300 400 450 450 500 600 600 460 610 610 150/b
w.
etg
ht I RF
I
Kg
BW Kg
27 48 67 160 235 350 470 650 975 1560 2500 3497
18 48 66 136 164 344 400 532 830 1338 2144 2957
Trim Material
600LB
DHV Disc Seat Ring
14 16 20 24 30 Trim Surface Surface Stem Backseat
35.00 39.00 47.00 55.00 65.00 Code Part No.3 Part No.4 Part No.5 Part No.8
889 991 1194 1397 1651
Weld End Lt
in 31.00 33.00 35.00 39.00 47.00 55.00 65.00 1 13CR 13CR F6A 420
mm 787 838 889 991 1194 1397 1651
2 HF HF F6A 420
RTJ L2 in 31.14 33.12 35.12 39.12 47.25 55.38 65.50
mm 791 841 892 994 1200 1407 1664 3 13CR HF F6A 420
63.15 70.83 86.22 103.70 127.20 4 Monel Monel Monel Monel
1604 1799 2190 2634 3231
23.60 26.80 18.10 24.00 27.60 27.60 39.40 5 316 316 F316 316
460 610 700 700 1000 6 316 HF F316 316
3680
3077 7 304 304 F304 304
8 304 HF F304 304
9 INCONEL INCONEL INCONEL INCONEL
A HF HF F316 316SS
B DSS DSS DSS DSS
Weld End Lt Standard Material Specifications
Stainless Steel to ASTM
RTJ L2
1 Body A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CFB A351 CFBM A8904A
2 Bonnet A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CFB A351 CFBM A8904A
3 Disc A105N A350 LF2 A350 LF2 A182 F11 A182F5A A182 F9 A182 F304 A182 F316 A182 F51
4 Seat Ring A105 A350 LF2 A350 LF2 A182 F11 A182F5A A182 F9 A182 F304 A182 F316 A182 F51
6 Thrust Washer A276430 A276430 A276430 A276430 A276430 A276430 A182 F304 A182 F316 A182 F51
7 Disc Nut A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
9 Packing Ring A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
10 Gland A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
11 Gland Flange A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CFB A351 CFBM A8904A
12 Stem Nut A439 D2 B150 C61900
16 Handwheel Ductile Iron
18 Packing Graphite
Weld End Lt
19 Bonnet Bolt A193 B7 A320 L7 A320 L7 A193 B16 A193 B16 A193 B16 A193 BB A193 BBM A193 BBMLCuN
RTJ L2 20 Bonnet Nut A1942H A194 7 A1947 A1944 A1944 A1944 A1948 A1948M A194 BMLCuNa
21 Eyebolt A193 B7 A320 L7 A320 L7 A193 B16 A193 B16 A193 B16 A193 BB A193 BBM A193 BBMLCuN
22 Nut A1942H A194 7 A1947 A1944 A1944 A1944 A1948 A1948M A194 BMLCuNa
23 Pin Steel
24 Screw Steel
Weight 25 Handwheel Nut Steel
26 Washer Steel
For sizes out of above range, please consult DHV for details.
w
Features
• OS & Y, Rising Stem
·Plug Disc
• Bolted Bonnet
• Renewable Seat Rings Welded or Threaded
• Flanged Ends or Buttwelding Ends
Specifications ::I: ~
0
Basic Design: 85 1873 API 623
Face to Face: ASME 816.10
End to End: ASME 816.10
End Flange: ASME 816.5
B.W End: ASME 816.25
Test and Inspection: API598
Manufacturing to NACE MR01 03 on request
Ll L2
L (BW) (RTJ)
(RF)
Weld End L1
RTJ L2 RTJ L2
Weld End L1
RTJ L2 RTJ L2
For sizes out of abo~e range, please consult DHV for details.
Features
Trim Material • Bolted Bonnet
DHV Disc Seat Ring • Swing Type Disc
Trim Surface Surface • Renewable Seat Rings Welded
Code Part No.3 Part No.4 or Threaded
1 13CR 13CR • Flanged Ends or Buttwelding Ends
2 HF HF
3 13CR HF Specifications
4 Monel Monel Basic Design: 8S 1868 API 594
5 316 316 Face to Face: ASME 816.10
6 316 HF End Flange:
7 304 304 2~-24~ ASME 816.5
8 304 HF 26~-30~ ASME 816.47
9 INCONEL INCONEL B.W End: ASME 816.25
A HF HF Test and Inspection: API 598
L
8 DSS DSS Manufacturing to NACE MR01 03 on request (RF)
1 Body A216WC8 A352 LC8 A352 LCC A217WC6 A217 C5 A217 C12 A351 CF8 A351 CF8M A890 4A RF Kg 16 25 45 73 135 200 302 376 577 870 948 2030
Weight
2 Bonnet A216WC8 A352 LC8 A352 LCC A217WC6 A217 C5 A217 C12 A351 CF8 A351 CF8M A890 4A BW Kg 11 16 32 51 100 166 247 290 503 770 809 1770
3 Disc A216WC8 A352 LC8 A352 LCC A217WC6 A217 C5 A217 C12 A351 CF8 A351 CF8M A890 4A
4 Seat Ring A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51 300LB
5 Swing Arm A216WC8 A352 LC8 A352 LCC A217WC6 A217 C5 A217 C12 A351 CF8 A351 CF8M A890 4A Valve Size
6 Hinge A216WC8 A352 LC8 A352 LCC A217WC6 A217 C5 A217 C12 A351 CF8 A351 CF8M A890 4A Description
2 3 4 6 8 10 12 14 16 20 24
7 Disc Screw Stainless Steel
in 10.50 12.50 14.00 17.50 21.00 24.50 28.00 33.00 34.00 40.00 51.00
8 Hinge Pin Stainless Steel Flanged End L
mm 267 318 356 445 533 622 711 838 864 1016 1346
9 Screw Stainless Steel
in 10.50 12.50 14.00 17.50 21.00 24.50 28.00 33.00 34.00 40.00 51.00
10 Stud Stainless Steel Weld End L1
mm 267 318 356 445 533 622 711 838 864 1016 1346
12 Bonnet Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
in 7.87 9.06 9.80 12.40 15.00 17.56 20.31 21.69 23.82 29.02 32.83
13 Bonnent Nut A194 2H A194 7 A194 7 A194 4 A1944 A1944 A1948 A1948M A194 8MLCuNa Height H
mm 200 230 249 315 381 446 516 551 605 737 834
14 Stud Stainless Steel
RF Kg 25 57 64 120 195 329 460 576 851 1335 1808
15 Spring Washer Stainless Steel Weight
17 Washer Stainless Steel BW Kg 21 47 52 103 159 251 424 436 777 975 1752
For sizes out of above range, please consult DHV for details.
A HF HF HF
B DSS DSS DSS
Weld End L1
RTJ L2
Handwheel Dia W
mm
in
mm
470
13.78
350
651
13.78
350
710
31.50
800
1105
31.50
800
1227
31.50
800
1319
31.50
800
1741
31.50
800
1741
31.50
800
1885
31.50
800
2245
31.50
800
2470
31.50
800
2983
31.50
800
Part Name .. ... ' . .. '
1 Body A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
w.e•g
ht I RF Kg
18W Kg
27
21
91
75
113 363
289
590
485
900
738
1497
1300
1497
1300
1769
1434
2268
1838
3447
2892
4536
3741 2 Bonnet A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
80
3 Yoke A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
900LB 4 Disc A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
2 3 4 6 8 14 16 18 20 24 5 Seat Ring A105 A350 LF2 A350 LF2 A182 F11 A182 FSA A182 F9 A182 F304 A182 F316 A182 F51
14.50 15.00 18.00 24.00 29.00 40.50 44.50 48.00 52.00 61.00 7 Seal Ring 316SS/Soft Steel Silver Plated
368 381 457 610 737 1029 1130 1219 1321 1549 8 Stem Nut A439 02 8150 C61900
in 14.50 15.00 18.00 24.00 29.00 33.00 38.00 40.50 44.50 48.00 52.00 61.00
Weld End L1 9 Packing Washer A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
mm 368 381 457 610 737 838 965 1029 1130 1219 1321 1549
in 14.61 15.12 18.11 24.13 29.13 33.11 38.11 40.87 44.88 48.50 52.52 61.73 10 Packing Gland A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
RTJ L2 mm 371 384 460 613 740 841 968 1038 1140 1232 1334 1568 11 Gland Flange A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
in 18.50 24.84 27.95 43.50 48.31 51.89 68.54 68.54 78.54 89.45 97.24 117.44
Height H 12 Gland Steel
470 631 710 1105 1227 1318 1741 1741 1995 2272 2470 2983
31.50 31.50 31.50 31.50 31.50 31.50 31.50 31.50 31.50 31.50 31.50 31.50 13 Handwheel Nut Steel
800 800 800 800 800 800 800 800 800 800 800 800 14 Handwheel Ductile Iron
27 91 113 363 590 900 1497 1497 1769 2268 3447 4536
15 Thrust Ring A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
21 75 80 289 485 1300 1434 1838 2892 3741
16 Retainer A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
17 Pressure Plate A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
18 Gland A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
19 Packing Graphite
20 Eyebolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
21 Eyebolt Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
24 Yoke Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
RTJ L2
25 Yoke Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
Height H 26 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
27 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
28 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
29 Bearing Steel
w
Features
o OS & Y, Rising Stem
o Flexible Wedge
o Body seat rings in all sizes
are seal-welded into the body
o Bonnet Seal achieved by fluid pressure
RTJ L2
o Hard faced backseat
o Flanged Ends or Buttwelding Ends
Height H
o By-pass system available upon request
o ISO pad available upon request
Weight
Specifications
Basic Design: API600 MSS SP-144
L
Face to Face: ASME 816.10 (RF)
End Flange: ASME 816.5
B.W End: ASME 816.25
Test and Inspection: API598
Manufacturing to NACE MR01 03 on request
RTJ L2
600LB 2:14-
900LB 2:10-
Height H
1500LB Oi!:8-
2500LB 2:8-
Weight
Bevel Gear
RTJ L2 RTJ L2
Height H Height H
Weight Weight
Trim Material w
Features
DHV 8odySeal Disc
o OS & Y, Rising Stem
Trim Surface Surface Stem
o Plug Disc
Code Part No.1 Part No.4 Part No.5
o Bonnet Seal achieved by fluid pressure
1 13CR 13CR F6A o Hard faced backseat
2 HF HF F6A o Flanged Ends or Buttwelding Ends
o By-pass system available upon request
3 HF 13CR F6A
o ISO pad available upon request
4 Monel Monel Monel
Trim Material
DHV Disc Seat Ring
Trim Surface Surface
Code Part No.3 Part No.4
1 13CR 13CR
RTJ L2 2 HF HF
3 13CR HF
Height H
4 Monel Monel
5 316 316
Weight
6 316 HF
7 304 304
1500LB 8 304 HF
ValveS1ze 9 INCONEL INCONEL
Descnpt1on
2 3 4 6 8 10 12 14
Flanged End L
in 14.50 18.50 21.50 27.75 32.75 39.00 44.50 49.50 A HF HF
mm 368 470 546 705 832 990 1130 1257
in 14.50 18.50 21.50 27.75 32.75 39.00 44.50 49.50
B DSS DSS
Weld End L1
mm 368 470 546 705 832 990 1130 1257
in 14.62 18.62 21.62 28.00 33.13 39.38 45.12 50.25 Standard Material Specifications
RTJ L2
mm
in
371
23.82
473
32.28
549
33.07
711
47.44
841
69.49
1000
77.17
1146
89.17
1276
103.94
Part Name .. . . ..
Height to Open H 1 Body A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
mm 605 820 840 1205 1765 1960 2265 2640
in 13.80 19.70 24.00 24.00 24.00 39.40 39.40 39.40 2 Bonnet A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
Handwheel Dia W
mm 350 500 610 610 610 1000 1000 1000 3 Disc A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
w.
etg
ht I RF
[BW Kg
Kg 84 140 232 900 1730 2625 3330 4200 4 Seat Ring A105 A350 LF2 A350 LF2 A182 F11 A182F5A A182 F9 A182 F304 A182 F316 A182 F51
58 125 164 763 1468 2225 2740 3500 5 Swing Arm A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
6 Hinge A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217 C12 A351 CF8 A351 CF8M A8904A
Features
• Pressure seal bonnet
• Swing Type Disc 14.50 15.00 18.00 24.00 29.00 33.00 38.00 40.50 44.50 48.00 52.00 61.00
FlangedEndl~-+----~~----+-----1------r-----+------~----+-----1------+-----1------r------
• Bonnet Seal achieved by fluid pressure mm 368 381 457 610 737 838 965 1029 1130 1219 1321 1549
• Body seat ring in all sizes is seal-welded in 8.50 12.00 14.00 20.00 26.00 31.00 36.00 39.00 43.00 48.00 52.00 61.00
Weld End L1
• Flanged Ends or Buttwelding Ends
in 14.62 15.12 18.12 24.12 29.12 33.12 38.12 40.87 44.87 48.50 52.50 61.75
RTJ L2
mm 371 384 460 613 740 841 968 1038 1140 1232 1333 1568
Specifications
in 9.75 10.92 12.86 16.22 23.74 24.51 28.11 29.65 30.51 34.42 34.94 38.78
Basic Design: ASME 816.34 Height H
mm 248 277 327 412 603 622 714 753 775 874 888 985
Face to Face: ASME 816.10
RF Kg 43 60 113 249 615 917 1402 1672 1780 2363 3082 4212
End Flange: ASME 816.5 Weight
BW Kg 22 35 70 173 475 745 1100 1316 1457 1900 2465 2979
B.W End: ASME 816.25
Test and Inspection: API598
L
Manufacturing to NACE MR01 03 on request (RF)
in 14.50 18.50 21.50 27.75 32.75 39.00 44.50 49.50 54.50 60.50 65.50 76.50
FlangedEndl~-+----~~----+-----1------r-----+------~----+-----1------+-----1------r------
mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943
in 8.50 12.00 16.00 22.00 28.00 34.00 39.00 42.00 47.00 60.50 65.50 76.50
Weld End L1
mm 216 305 406 559 711 864 991 1067 1194 1537 1664 1943
in 14.62 18.62 21.62 28.00 33.13 39.38 45.12 50.25 55.38 61.38 66.38 77.63
RTJ L2
mm 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972
in 9.75 10.91 12.86 17.07 19.37 23.90 26.08 28.75 30.29 35.59 38.38 44.44
Height H
L1 L2
(BW) (RTJ) RF
Weight
BW 22 43 76 239 518 798 1186 1521 1726 2157 2671 3595
in 11.62 14.12 17.12 22.12 26.12 31.12 33.12 35.12 39.12 43.12 47.25 55.38 57.50 63.50 65.5 in 17.88 23 26.88 36.50 40.88 50.88 56.88
RTJ L2 RTJ L2
mm 295 359 435 562 663 790 841 892 994 1095 1200 1407 1461 1613 1664 mm 454 584 683 927 1038 1292 1445
in 9.75 10.92 12.86 16.22 23.74 24.51 28.11 29.65 30.51 30.51 33.12 38.38 40.44 44.44 48.53 in 9.91 10.92 12.86 18.24 22.61 23.29 26.53
Height H Height H
mm 248 277 327 412 603 622 714 753 775 775 841 975 1027 1129 1233 mm 252 277 327 463 574 592 674
RF Kg 28 46 87 195 360 514 688 904 1181 1520 1931 2671 3184 3595 4109 RF Kg 91 167 307 604 1100 1722 2847
Weight Weight
BW Kg 18 33 56 134 267 380 503 678 873 1130 1531 2095 2568 2876 3236 BW Kg 54 91 146 293 614 804 1553
For sizes out of abo~e range, please consult DHV for details. For sizes out of abo~e range,please consult DHV for details.
Features w
Specifications
·Through-conduit design with minimum flow resistance Basic Design: API 60
• Double-sealing replaceable seat Face to Face: API 60
• Locking device End Flange:
• Backseated Stem 2"-24" ASME 816.5
• Body thermal relief system upon request 26"-40" ASME 816.47
• Stem extension upon request B.W End: ASME 816.25
• Double-block-and-bleed Test and Inspection: API60 &API598
Manufacturing to NACE MR0175 on request
Flange Gasket
150LB >20"
300LB i! 16"
600LB i! 12"
Ring Type Joint
900LB 0?. 10"
Spria/ Wound Gasket Metal Backup
0!: 600/b 300/b Graphite Gasket 1500LB i! 8"
150/b 0?. 4"
2500LB
Bevel Gear
Standard Material Specifications
L
Part Name Carbon Steel to ASTM Alloy Steel to ASTM Stainless Steel to ASTM
(RF)
1 Body A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
2 Bonnet A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
3 Gate A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51
4 Seat A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51
5 Seat Insert RPTFE I PTFE I Nylon M I Devlon I Viton I Peek or Metal to Metal
7 Stem A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
8 Backseat A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
9 Yoke A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
10 Packing Plate A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
11 Lantern Ring A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
12 Stem Nut A439 02 B150 C61900
14 Indicator Steel
15 Dustproof Cover Steel
16 Spring Steel
18 Drain Fitting 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS A182 F51
20 Stem Sealant Injection Assembly
21 Seal Sealant Injection Assembly
22 Packing Non-metal
23 0-Ring Viton
25 Graphite Packing Flexible Graphite
26 Stud A193 B7 A320 L7 A320 L7 A193 B16 A193 B16 A193 B16 A193 B8 A193 B8M A193 B8MLCuN
27 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
28 Stud A193 B7 A320 L7 A320 L7 A193 B16 A193 B16 A193 B16 A193 B8 A193 B8M A193 B8MLCuN
29 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
33 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
36 Injection Check Valve Assembly
42 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
44 Handwheel Ductile Iron
45 Bearing Steel Weight
47 Gland Steel
49 Nut A1942H A194 7 A194 7 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa For &ize& out of above range,pkase con&ult DHV for defllils.
Flange Gasket
RTJ L2
Height H
Ring Type Joint Metal Backup
0!: 600/b Graphite Gasket
150/b
RTJ L2
Height H
special relief system
upon request
Standard Material Specifications
Part Name Carbon Steel to ASTM Alloy Steel to ASTM Stainless Steel to ASTM
Weight
1 Body A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
2 Bonnet A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
1500LB
3 Seat A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51
Descflpron
t ValveS1ze 4 Seat Insert RPTFE I PTFE I Nylon M I Devlon I Viton I Peek or Metal to Metal
2 3 4 6 8 10 12 14 16 18 20 24
5 Gate A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51
in 14.50 18.50 21.50 27.80 32.80 39.00 44.50 49.50 54.50 60.50 65.50 76.50
Flanged End L 6 Segment A105 A350 LF2 A350 LF2 A182 F11 A182 F5A A182 F9 A182 F304 A182 F316 A182 F51
mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943
in 14.50 18.50 21.50 27.80 32.80 39.00 44.50 49.50 54.50 60.50 65.50 76.50 7 Lever A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
Weld End L1
mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 8 Stem A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
in 14.61 18.62 21.61 27.99 33.11 39.37 45.12 50.24 55.39 61.38 66.38 77.64 9 Skirt A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
RTJ L2
mm 371 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 10 Yoke A216WC8 A352 LC8 A352 LCC A217WC6 A217C5 A217C12 A351 CF8 A351 CF8M A8904A
in 22.05 31.50 32.99 44.09 51.57 63.66 72.32 80.24 87.01 95.20 105.20 124.88
Height H 11 Lantern Ring A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
mm 560 800 838 1120 1310 1617 1837 2038 2210 2418 2672 3172
12 Packing Plate A276420 A276420 A276420 A276420 A276420 A276420 A182 F304 A182 F316 A182 F51
Handwheel Dia W
in 15.80 19.70 23.60 31.50 24.00 27.60 27.60 27.60 27.60 39.40 39.40 39.40
mm 400 500 600 800 610 700 700 700 700 1000 1000 1000 13 Stem Nut A439 D2 8150 C61900
Weight I RF Kg 100 265 380 880 1310 2100 3325 4380 5500 6550 8500 13800 14 Washer Steel
IBW Kg 80 229 329 728 1031 1830 3255 3480 4600 5550 7470 13400 15 Dustproof Cover Steel
16 Indicator Steel
2500LB 17 Handwheel Ductile Iron
Descflpron
t ValveS1ze 18 Rivet Steel
2 3 4 6 8 10 12 19 Bearing Steel
in 17.80 22.80 26.50 36.00 40.20 50.00 56.00
Flanged End L 21 Drain Fitting 316SS 316SS 316SS 316SS 316SS 316SS 316SS 316SS A182 F51
mm 451 578 673 914 1022 1270 1422
in 17.80 22.80 26.50 36.00 40.20 50.00 56.00 22 Seat Sealant Injection Assembly
Weld End L1 Assembly
mm 451 578 673 914 1022 1270 1422 23 Stem Sealant lnlectlon
in 17.87 22.99 26.89 36.50 40.87 50.87 56.89 24 0-ring Vi ton
RTJ L2
mm 454 584 683 927 1038 1292 1445 26 Packing Non-metal
in 22.68 32.44 33.86 45.28 53.15 65.55 74.49 27 Graphite Packing Flexible Graphite
Height H
mm 576 824 860 1150 1350 1665 1892
28 Stud A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
in 15.80 19.70 24.00 24.00 24.00 24.00 27.60
Handwheel Dia W 29 Nut A1942H A1947 A1947 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
mm 400 500 610 610 610 610 700
30 Stud A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 88M A193 88MLCuN
w.
e•g
hi I RF Kg
IBW Kg
146 370 545 1215 2145 3900 5660
111 300 430 925 1705 3130 4760 31 Nut A1942H A1947 A1947 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
For sizes out of above rtmge,please consult DHV for details. 32 Nut A1942H A1947 A1947 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
Features
w
• Through-conduit design
with minimum flow resistance
·Double-sealing replaceable seat
• Locking device
• Body thermal relief system
~
• Stem extension upon request tZl
::c: 3
u RTJ L2
Specifications
Height H
Basic Design: API6D
Face to Face: API6D
End Flange:
Weight
2--24- ASME 816.5
B.W End: ASME 816.25
Test and Inspection: API 60 & API 598
Manufacturing to NACE MR0175 on request
L
(RF)
300LB
600LB RTJ L2
900LB
1500LB i!: 6- Height H
L2
Seve/Gear
Weight
RTJ L2
Height H
mm 2515 2910 3530 3685 4080 931 1178 1335 1510 1810 2100 2210 2515 2910 3530 3685 4080
Height H
in 18.11 24.02 24.02 24.02 24.02 15.75 23.62 23.62 29.53 18.11 18.11 18.11 18.11 24.02 24.02 24.02 24.02
Handwheel Dla W
mm 460 610 610 610 610 400 600 600 750 460 460 460 460 610 610 610 610
RF Kg 1500 3780 4700 5780 8680 277 418 549 804 1075 1409 2278 2551 4359 7332 8000 10014
Weight Weight
BW Kg 1464 3740 4520 5300 8500 243 347 490 751 911 1231 2191 2360 3899 6792 7270 8154
For sizes out of above range, please consult DHV for details. For sizes out of above range, please consult DHV for details.
Flange Gasket
L2
(RTJ)
;e:4" No Spring
Features
• Bolted Bonnet
• Rising Type Disc
• Renewable Seat Rings Welded or Threaded
• Flanged Ends or Buttwelding Ends
• Metal Seat & Soft Seat Seal
• Quiet non-slam closure
Specifications
Basic Design: API6D ASME 816.34
Face to Face: DHV Standard
End Flange:
2~-24~ ASME 816.5
26~-40~ ASME 816.47
LI
B.W End: ASME 816.25
Test and Inspection: API6D L
Manufacturing to NACE MR0175 on request (RF)
19 O·Ring Vi ton
20 Graphite Packing Flexible Graphite
21 Stud A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
22 Nut A1942H A1947 A1947 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
23 Lock Bolt Steel
24 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
25 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
26 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
27 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
28 Bolt A193 87 A320 L7 A320 L7 A193 816 A193 816 A193 816 A193 88 A193 B8M A193 B8MLCuN
29 Nut A1942H A1947 A1947 A1944 A1944 A1944 A1948 A1948M A194 8MLCuNa
30 Lock Pin Steel
31 Hand Pipe Steel
32 Snap Ring Steel
6 HF 316
7 304 304
8 HF 304
9 INCONEL INCONEL
L L2 A HF HF
Bevel Gear (RF)
8 DSS DSS
1 Body A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217 C12 A351 CFB A351 CFBM A890 4A
2 Disc A216WCB A352 LCB A352 LCC A217WC6 A217C5 A217 C12 A351 CFB A351 CFBM A890 4A
3 Pin A105 A350 LF2 A350 LF2 A105 A105 A105 A182 F304 A182 F316 A182 F51
5 Holder Lock A105 A350 LF2 A350 LF2 A105 A105 A105 A182 F304 A182 F316 A182 F51
Height H
6 Screw Steel
7 Pin Holder A105 A350 LF2 A350 LF2 A105 A105 A105 A182 F304 A182 F316 A182 F51
For sizes out of above range, please consult DHV for details.
(c) "The COMPANY'- DHV Industries, Inc. or DHV Valve Company, Inc. or alternatively any
invoice unless otherwise agreed in writing. The COMPANY is entitled to charge interest on
overdue payments a1 the greater of the following two rates: (a) 1.5% monthly or (b) 2% annually
above the current monthly base rate of the COMPANY'S bank. In no event shall the interest rate
and Double Flange 150 • • • • • • • • • • • affiliated company named in COMPANY'S quotation. be higher than the maximum rate permitted by applicable law.
API603 300 • • • • • • • • • • •
600 • • • • • • • • • • • (d) "The CUSTOMER" -The individual, finn, partnership, company or other party w~h whom the (c) In addition to exercising its rights at common law or under statute, the COMPANY is entitled
150 • • • • • • • • • • • • • Company contracts. to terminate the CONlRACT by written notice 1D the CUSTOMER ~ the CUSTOMER is in
BS 1873
300 • • • • • • • • • • • material breach of ~ obligations under the CONTRACT or any other agreements with the
Globe Valve
API623
600 • • • • • • • • • • • (e) 'FORCE MAJEURE" - My cause or circumstances Oncluding but not limited to, act of God, COMPANY. The CUSTOMER is in material breach:
900/1500 • • • • • • • • • • • fire, storm, flood, drought, earthquake, malicious damage, shortage of material, manufacturer's • If it fails to meet its liabilities when they fall due;
2500 • • • • • • • • • inability to provide the Product, embargo, riot, strike, look-out, trade dispute, civil disturbance, • If it seeks a composition w~h its creditors;
150 • • • • • • • • • • • • • • • war, compliance w~h any law or government order, rule or direction or any other event or ·If all or part of Its property Is subject to receivership; or
BS 1868 300 • • • • • • • • • • • • • • acciden~ beyond the reasonable and direct control of COMPANY. • If a pet~ion for liquidation, winding-up or administration is filed in respect of the CUSTOMER.
Check Valve
AP1594 600 • • • • • • • • • • • • • •
90011500 • • • • • • • • • • • • 2.SCOPE (d) The CUSTOMER is not entitled to wiltlhold, set off or deduct claims against the COMPANY
2500 • • • • • • • • • • • (a) These General Conditions set out the standard terms on which the COMPANY supplies from an amount that it owes the COMPANY under the CONTRACT or other agreement w~ the
Parallel Slide
600 • • • • • • • • • • • PRODUCTS to the CUSTOMER. Accordingly, these General Conditions apply to all quotations COMPANY.
Gate Valve
ASME 816.34 900/1500 • • • • • • • • • • • and sales unless otherwise agreed in writing.
2500 • • • • • • • • • • • (e) The COMPANY is obligated to deliver a PRODUCT only if the CUSTOMER has made due
Pressure Seal API60D 600 • • • • • • • • • • • • • (b) The legality, validity, and enforceability of other clauses in these General Conditions will not payment ot all amounts that it owes to the COMPANY at the date ot delivery under the
Gate Valve MSS SP-144 900/1500 • • • • • • • • • • • • • be affected if one of the clauses is, or becomes illegal, invalid, or unenforceable. CONTRACT or other agreement w~h the COMPANY. The COMPANY is entitled to suspend
2500 • • • • • • • • • • • delivery of a PRODUCT if the CUSTOMER is in default ~hout this alfectng the COMPANY'S
600 • • • • • • • • • • • • (c) We reserve the right to instttute changes in material, design and specification without notice. other rights under the CONTRACT or oltler agreement wiltl the CUSTOMER. The COMPANY is
Pressure Seal
ASME 816.34 900 • • • • • • • • • • • • not obligated to resume deliveries until the CUSTOMER has paid all overdue amounts, including
Globe Valve 1500 • • • • • • • • • 3. QUOTATIONS AND ORDERS all expenses and accrued interest.
2500 • • • • • • • (a) Unless otherwise expressly stipulated, all of the COMPANY'S quotations and prices are
Pressure sear
600 • • • • • • • • • • • • • subject to change w~hout notice, and to availability. Prices are valid only for the duration (f) It is the CUSTOMER'S exclusive responsibility to obtain all licenses, exchange control
ChackValva
ASME 818.34 900/1500 • • • • • • • • • • • • indicated in the quotation and are subject to change without notice. documents and other consents needed for the import and use of the PRODUCTS as well as for
2500 • • • • • • • • • payment of the PRODUCTS. The CUSTOMER will not be discharged from his obligations under
150 • • • • • • • • • • • • • • • • (b) My written or oral purchase order received from the CUSTOMER by the COMPANY these General Cond~ions because he fails to obtain a license or other consents.
300 • • • • • • • • • • • • • • • C'Order'? shall be interpreted as a written acceptance of the COMPANY'S offer to sell, and shall
Slab Gate Valve API&D 600 • • • • • • • • • • • • • • • be filled in accordance with the terms and cond~ions ot the sale set forth herein. The terms and
cond~ions of the Company's proposal (rf at all any) shall prevail over any conflicting or different
6. DEUVERY AND FORCE MAJEURE
900/1500 • • • • • • • • • • • • • (a) While the COMPANY will endeavor to deliver the PRODUCTS by any date or within any
terms in CUSTOMER'S orders unless the CUSTOMER notHies the COMPANY in wming of its
2500 • • • • • • • objections thereto w~hln the earlier of the date of shipment of the Product or fifteen (15) days
period agreed upon, such dates and periods are estimates only given in good faith and the
150 • • • • • • • • • • • • from receipt of COMPANY'S General Conditions. CUSTOMER'S standard terms of purchase
COMPANY wi II not be liable for any failure to deliver by such date or within such a period. Time
300 • • • • • • • • • • • • will not be considered as a counter-<>ffer to COMPANY'S tenns and conditions of sale. The
for delivery shall not be of the essence of the CONTRACT.
Expanding Gate
API6D
600 • • • • • • • • • • • • • • • COMPANY will not be bound by conflicting purchasing cond~ions or reservations made by the
Valve 900 • • • • • • • • • • • • • CUSTOMER even if the COMPANY does not explicitly contradict the conditions or reservations.
(b) Should the COMPANY be delayed In or prevented from making the delivery of the
1500 • • • • • • • • • PRODUCTS due to Force Majeure, the COMPANY may tenninate the CONlRACT or suspend
the Order without incurring any liability for any loss or damage arising there from, but without
2500 • • • • • • • (c) No order in pursuance of any quotation or otherwise shall be binding on the COMPANY prejudice in any such case to rights accrued to the COMPANY for deliveries already made.
150 • • • • • • • • • • • • • • • • unless and until such an order is accepted by the COMPANY. The COMPANY may reject any
300 • • • • • • • • • • • • • • • order in whole or part. A contract between the COMPANY and CUSTOMER is finalized once the (c) Unless otherwise agreed to in w~ing by the COMPANY, the COMPANY shall deliver the
Swing Check Valve AP16D 600 • • • • • • • • • • • • • • • COMPANY issues a telephonic, electronic, or written order confinnation to the CUSTOMER or PRODUCTS by the means most convenient to the COMPANY to the address or addresses
900 • • • • • • • • • • • • • ships the Product to the CUSTOMER. Except as otherwise specifically provided herein, the specified by the CUSTOMER at the time of placing the Order or On the event that the
1500 • • • • • • • • • • • • Order is the final and complete expression of the agreement between the parties, setting forth CUSTOMER fai Is so to specify an address) to an address at which the CUSTOMER resided or
2500 • • • • • • • • • • • the entire agreement between the parties regarding this transaction and including all promises carries on business. The PRODUCTS are considered to be delivered when they are physically
150 • • • • • • • • • • • • • and representations both express and implied. My matters not contained herein, or otherwise handed over to 1) the CUSTOMER, 2) the CUSTOMER'S agent or a person that the CUSTOMER
300 • • • • • • • • • • • • • referenced or incorporated herein, are not part of the Order. has authorized to take delivery, or (3) the carrier, regardless of who pays shipping costs. The
Piston Check Valve
API6D 600 • • • • • • • • • • • • • COMPANY shall be en1itled to add ID the contract price a reasonable charge for packaging,
ASME 816.34 900/1500 • • • • • • • • • • • (d) Subject ID the specific procedures for changes to the Order, none of the tenns and delivery and insurance. Off-loading will be a1 CUSTOMER'S expense•
1500 • • • • • • • • • • • conditions contained herein may be added to, modified, superseded, or otherwise aHered
2500 • • • • • • • except by a written instrument specifically referencing the affected provision of the Order signed (d) The CUSTOMER is obligated to pay all costs that the COMPANY incurs because of the
API6D
150 • • • • • • • • • • • • • by the President or Vice President of the COMPANY. CUSTOMER'S failure to taka delivery either 1) on the data stated in the invoice or the
Plug Valve API599
300 • • • • • • • • • • • • • COMPANY'S confinnation, or 2) when the PRODUCTS are ready, if the COMPANY has notified
ASME B 16.34
600 • • • • • • • • • • • • • 4.PRICES the CUSTOMER in writing of their readiness and the CUSTOMER has not taken delivery within
900 • • • • • • • (a) All prices shown are in U.S. dollars and are F.O.B. COMPANY'S shipping point, unless seven days or any period to which the parties agree.
150 • • • • • • • • • • • • • otherwise expressly agreed to by COMPANY. (e) If the COMPANY is responsible for delivery, the CUSTOMER must thoroughly inspect the
Dual-Plata Wafer
300 • • • • • • • • • • • • • PRODUCTS sent at the COMPANY'S risk. The CUSTOMER is to notify the COMPANY in writing
ChackValva
API594 600 • • • • • • • • • • • • • (b) Prices exclude any duties, federal, state or local taxes or other government charges and immediately of loss, damage or shortage of PRODUCTS. If the CUSTOMER does not receive
900/1500 • • • • • • • • • • • • • delivery costs, which the CUSTOMER must pay unless the law specifically provides that the the PRODUCTS on the agreed date of delivery, it is to notify the COMPANY wiltlin 48 hours of
2500 • • • • • • • COMPANY must make such payment in which case the CUSTOMER shall reimburse the the agreed date of delivery. The COMPANY disclaims all liability, and the CUSTOMER waives
DHV will deYelop more size mul class w meet client special requirement. Consulte DHVfor latest complete product scope. COMPANY for such payments as part of the purchase price. All prices include the COMPANY'S its rights of recovery, under this provision unless the CUSTOMER'S information is sufficient to
For sizes out of above rtutge, pleiJJje consult DHV for detail&.