Beruflich Dokumente
Kultur Dokumente
Scaletec MC
Technical specification
Standard features
»»Control system »»Carrier
• Rig Control System, RCS • M-series carrier
• Interactive operator’s panel • Articulated steering, 4-wheel drive
• Integrated diagnostic system • Low-emission, turbo-charged, water-cooled 4-cylinder diesel
• Logging system engine
• Jacks for stable set-up
»»Scaler hammer • Cable reel
• Atlas Copco SB 302
• Dust suppression system »»Cabin
• Automatic lubrication • FOPS-approved cabin
• Hydraulic accumulator • Cabin lift and tilt system
• Operator’s seat for tramming and scaling
»»Hydraulic boom
• BUT SC boom designed for scaling »» General
• Mechanical parallel holding system • Electric/hydraulic tramming
• Proportional positioning • Fast reverse button
• Automatic lubrication system • Water booster pump
• Screw compressor
• Shovel blade with jacks
Scaletec MC
Specifications
»»Hammer »»Carrier
• SB 302 • Engine...............................................Deutz TCD 2013L04 2V
• Impact energy....................................................................375 J • Power rating at 2,300 rpm............................. 120 kW (163 hp)
• Impact rate................................................................ 10–23 Hz • Torque at 1,400 rpm.....................................................572 Nm
• Hydraulic pressure, max....................................... 100–150 bar • Tramming speed on flat ground............................... > 15 km/h
• Oil flow..................................................................50–83 l/min • Tramming speed on incline 1:8.................................. > 5 km/h
• Articulated steering....................................±38º steering angle
• Weight............................................................................ 304 kg
• Four wheel drive
• Automatic lubrication system • Hydrostatic power steering system
• On board refill system for hammer lubrication pump • Hydrodynamic transmission..................................Clark 32000
• Front axle...............................................DANA Spicer 123/90
• Rear axle........................DANA Spicer 123/90, ±8º oscillation
»»Boom • Automatic differential lock on front axle, limited slip
• Tyres............................................................... 12.00 R24 XZM
• BUT SC
• Clearance outside axles....................................................... 15º
• Parallel holding...................................................... mechanical
• Hydraulic jacks, rear...............................................................2
• Weight, boom only......................................................2 700 kg
• Adjustable shovel blade in the front end with hydraulic jacks
• Service brakes..............................................2 separate circuits
»»Hydraulic system • Emergency and parking brakes......................................SAHR
• Fuel tank, volume............................................................. 100 l
• Hydraulic pump................. 2 variable pumps and 1 gear pump • Exhaust catalyser
• Pumps unloaded at start • Electric system..................................................................24 V
• System pressure, max................................................... 250 bar • Batteries...................................................................2 x 125 Ah
• Hydraulic oil tank, volume min/max........................ 200/250 l • Tramming lights LED................................................ 8 x 40 W
• Low oil level indicator including shut down • Illuminated stairs for platform
• Oil temperature gauge on oil tank • Central lubrication system
• Filtration......................................................................... 16 µm • Silencer
• Water-cooled oil cooler • Catalyser
• Mineral hydraulic oil • Fire extinguisher
• Electrical oil filling pump • Spirit levels, one for longitudinal and one for sideway
• Horn
• Shelf for hammer chisels and tools
»»Air system • Gradeability at max load on drive wheels........................... 1:4
• Beacon warning lamp
• Hydraulic driven screw compressor............ Atlas Copco GA 5 • Reverse alarm
• Capacity, max at 7 bar......................................................10 l/s • Brake lights
• Hydraulic drive, axial piston motor................................. 10 cc • Manual lubrication kit
• Air pressure gauge • Rig washing kit
• Air receiver......................................................................... 80 l
Specifications
Coverage area
-6 -5 -4 -3 -2 -1 0m 1 2 3 4 5 6 -6 -5 -4 -3 -2 -1 0m 1 2 3 4 5 6
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0m 0m
8000
7000
6000
5000
4000
3000
2000
1000
-1000
-2000
0
1000
2000
3000
4000
5000
6000
7000
8000
Optional Equipment
Measurements
side view
© Copyright 2010, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model
denominations, part numbers and drawings. lllustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment subjects to change without notice. Consult your Atlas Copco Customer Center for specific information.
3013
17°
2015
205
2911 4170 2163
4911 4333
13050
2574
R700 R4
0 000
22
45
gross weight Max length 85 mm, fully would RDOT 35 with D=38.
Recommendations are given for surrounding temperature of 40° C.
kg Total 21 970
Boom side 12 500
9851 2357 01e