0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
53 Ansichten2 Seiten
This paper describes the theoretical and experimental results achieved in optimising the application of the series loaded series resonant converter for contactless energy transfer. The main goal of this work is to define the power stage operation mode that guarantees the highest possible efficiency.
This paper describes the theoretical and experimental results achieved in optimising the application of the series loaded series resonant converter for contactless energy transfer. The main goal of this work is to define the power stage operation mode that guarantees the highest possible efficiency.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als TXT, PDF, TXT herunterladen oder online auf Scribd lesen
This paper describes the theoretical and experimental results achieved in optimising the application of the series loaded series resonant converter for contactless energy transfer. The main goal of this work is to define the power stage operation mode that guarantees the highest possible efficiency.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als TXT, PDF, TXT herunterladen oder online auf Scribd lesen
switched capcitor switched inductor structer for getting transformer loss
resonance conntact less energy transfered with improved effiency
This paper describes the theoretical and experimental results achieved in optimi zing the application of the series loaded series resonant converter for contactless energy transfer. The main goal of this work is to define the power stage operation mode that guarantees the highest possible efficiency. The results suggest a method to select the physical parameters (operation frequ ency, characteristic impedance, transformer ratio, etc.) to achieve that efficiency improvement. The research c larifies also the effects of the physical separation between both halves of the ferromagnetic core on the characteristics of the transformer. It is shown that for practical values of the separation distance, the leakage inductance, being part of the resonant inductor, remains almost unchanged. Nevertheless, the current distribution between the primary and the secondary win dings changes significantly due to the large variation of the magnetizing inductance. An approximation in the circuit analysi s permits to obtain more rapidly the changing values of the converter parameters. The analysis results in a set of equations w hich solutions are presented graphically. The graphics show a shift of the best efficiency operation zone, compared to the converter with an ideally coupled transformer. Experimental results are presented confirming that expected tendency....
Boost derived DC-to-AC converter with zero voltage switching
In this paper, we present a single-ended DC-to-AC converter with zero voltage sw
itching and output isolation. It is a current fed converter having variable frequency control to get symmetrical regulated AC output. The tr ansformer provides electrical output isolation. Two switches operating in complementary fashion control the operation of the con verter and provide transformer core resetting. The resonance of the parasitic capacitances with the magnetizing inductance of t he transformer and output side inductor causes zero voltage switching for both switches in order to reduce switching losses. Th e output has an LCC resonant tank circuit which controls the power flow and shape of the output AC voltage. Steady state equatio ns are presented and basic circuit operation is explained. Simulation results verifying the theoretical waveforms are also presented.... Current-sharing control technique for interleaving VRMs using intercell transfor mers.. Abstract Parallel converter architecture using intercell transformers is one of the most adapted architecture for low-voltage, high-current and fast transient power conversion applications. Interleaved buck converter with intercell transformers main interest is the current ripple reduction in each converter arms which is n ot the case with non-coupled inductor architectures. As a consequence, current constraints on switches and inductors are less severe and lower Joule losses are obtained leading to a higher efficiency. This paper highlights a fundamental limitation for those interleaved converters using intercell transformers. A differential current error through transformer causes flux drift and can lead to magnetic core saturation. In case of temporary control failure, arm currents get back to proper balance with a very slow dynami c response. State-space study allows us to calculate arm current transfer function and deduce the differential current time constant. Finally, a stability study with standard filters is presented and a proper current-sharing loop regulator filter is proposed in order to speed up system return to equilibrium.