Beruflich Dokumente
Kultur Dokumente
08.04.2008
Test method Page1 of 2
X:\GROUPS\EVD_MC\Ökologie+QM+Sicherheit\Qualitätsmanagement\Prüfmethoden\Originale\PM Konzentration FeCl3 englisch (Stand 02.2008).doc
®
Determination of the concentration of the Trilon types with FeCl3
Basis: Complexometric titration
Procedure: Sample weight: Trilon liquid 0.6 – 0.8 g (except Trilon C Liquid)
Sample weight: Trilon C liquid 0.8 – 1.0 g
Sample weight: Trilon powder 0.3 – 0.5 g
Weigh the sample into a glass beaker and dissolve it in ca. 50 ml dest. water.
The Trilon free acids must be dissolved with 1 M NaOH before the buffer
solution is added. Adjust pH at ca. 2,8 with acid/alkaline solution. Add ca.
50ml of buffer solution to it. Then titrate the solution against FeCl3 solution
with the platinum electrode and automatic titrator.
Calculation: V x F x MM x M x 100
Concentration (%) =
E x 1000
where
Test method:
Determination of the concentration of the Trilon® types with FeCl3
Ti Net 2.40
Sample: Trilon A Liquid
Method: Active content titrated against FeCl3 0.05 M, monotone
Titre of FeCl3: 1.0210
Molar mass: 257
Sample weight: 0.6192 g
End points:
MET U.EP1 18.8165 ml 439.7 mV
Results:
Concentration 39.87 %