Beruflich Dokumente
Kultur Dokumente
COURSE STRUCTURE
AND
DETAILED SYLLABUS
for
2017-2018
1
MECH IIYr(2017-18)
II Year – II Semester
S.No. Subject Subject L T P/D C Max.
Code Marks
1 6H416 Probability and Statistics 3 1 --- 3 25 75
2 6B409 Applied Thermodynamics-I 3 1 --- 3 25 75
3 6B410 Manufacturing processes 3 1 --- 3 25 75
4 6AC48 Elements of Electrical and 2 2 --- 2 25 75
Electronics Engineering
5 Open Elective-I 2 1 -- 2 25 75
6 6B412 Machine Drawing and Computer 1 2 4 3 25 75
aided drawing
7 6EC70 Java Programming 2 2 - 2 25 75
8 6B477 Manufacturing Processes Lab --- --- 3 2 25 75
9 6AC95 Electrical and Electronics --- --- 2 1 25 75
Engineering Lab
10 6EC74 Java Programming Lab 2 1 25 75
11 6B477 Comprehensive Viva-voce-I --- --- --- 1 50 50
12 6B494 Technical seminar 2 1 100 --
Total 16 10 13 24 400 800
2
MECH IIYr(2017-18)
Note: All End Examinations (Theory and Practical) are of Three hours duration.
T – Tutorial L- Theory P/D – Practical/Drawing
C- Credits CIE- Continuous Internal Evaluation SEE – Semester End Evaluation
3
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
M H L
H: High M: Medium L: Low
COURSE OBJECTIVES
To enable students to -
Acquire higher competence in communicative English
Acquire the skill of presenting seminars
Acquire mastery in applying various sub-skills of reading
Develop interpersonal communication skills
Participate in group tasks using effective language
Enhance written communication from the employability perspective
COURSE OUTCOMES
d. Skimming Skills for identifying the central idea and recognizing the main
ideas
e. Intensive and Extensive reading
f. Identifying difference between facts/opinions, drawing inferences and
conclusions, identifying the style/tone of the passage/text
5
MECH IIYr(2017-18)
Suggested reading:
1. Technical communication- Meenakshi Raman and Sangeetha Sharma (Oxford
Publications)
2. Technical Writing Process and Product by SharonJ Gerson: Fifth edition.Pearson
Publishers.
3. Developing Communication Skills – Krishna Mohan and Meera Benarjee
4. SOFT SKILLS – Dr. K. Alex, S.Chand publications
5. Advanced Technical communication - Kavita Tyagi and Padma Mistri
6. Developing Speaking- Listening Skills in English (With CD)
7. Basic Communication Skills For Technology - Andrea J Rutherfoord- Pearson
8. Developing Communication Skills - Krishna Mohan- Macmillan
9. Written Communication Skills - Michael Hatton-iste
10. Soft Skills Know Yourself And Know The World - K Alex- S Chand
6
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M M H L
H: High M: Medium L: Low
Course Outcomes: After learning the contents of this paper the student must be able to
1. Find the roots of algebraic and transcendental equations and can solve problems of
numerical integration.
2. Find the Interpolating polynomial for the given tabular values.
3. Find the numerical solution of ordinary differential equations of IVPs.
4. Evaluate improper integrals using special functions; understand the basic concepts of
Bessel’s function and its properties.
5. Analyze the complex functions with reference to their analyticity, integration using
Cauchy’s integral theorem and find the Taylor’s and Laurent’s series expansion of
complex functions. Also evaluate the real integrals by using residue theorem
6. Solve problems in conformal mapping.
UNIT-I
Solution of algebraic and transcendental equations: The Bisection Method – Regular-Falsi
Method–Fixed point iteration Method – Newton-Raphson Method.
Numerical integration: Newton-Cotes Quadrature Formula, Trapezoidal rule – Simpson’s 1/3
rule – Simpson’s 3/8 rule.
UNIT-II
Interpolation: Introduction– Finite differences- Forward Differences, Backward differences,
Central differences. Newton’s formulae for interpolation – Gauss Central Difference Formulae
(without proofs), Lagrange’s Interpolation formula for unevenly spaced points, Hermit
Interpolation.
UNIT-III
Numerical solution of Ordinary Differential equations: Solution by Taylor’s series – Picard’s
Method of successive Approximations – Euler’s Method – Runge-Kutta Methods of fourth order,
Predictor-Corrector Methods-Milne’s Method.
7
MECH IIYr(2017-18)
UNIT-IV
Special Functions: Beta, Gamma Functions – Properties and Problems. Bessel’s Equation-
Bessel function, Expansions of Bessel functions J0, J1, Recurrence formulae, Orthogonality,
Generating function. (All theorems without proofs)
UNIT-V
Complex Analysis: Limits, Continuity and Differentiability, Analytic functions, Cauchy-
Riemann equations. Cauchy’s integral theorem, Cauchy’s integral formula, Taylor’s and
Laurent’s series, singularities and zeros, Cauchy’s residue theorem. (All theorems without
proofs)
2
Applications: Evaluation of real integrals:
f ( x) dx and f (cos , Sin ) d
0
UNIT VI
Conformal mapping: Translation, Inversion, Rotation and Magnification, Invariance of circles
and cross ratio-Determination of bilinear transformation – mapping three given points.
TEXT BOOKS:
1. Higher Engineering Mathematics, B.S. Grewal, Khanna Publications, New Delhi.
2. Advanced Engineering Mathematics, S. R. K. Iyengar and R.K. Jain, Narosa Publishing
House, London, 2002.
3. Engineering Mathematics, Srimanta Pal, OXFORD University press.
REFERENCE BOOKS:
1. Advanced Engineering Mathematics, Alan Jeffrey.
8
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H
H: High M: Medium L: Low
Syllabus for B. Tech. II Year I semester
Mechanical Engineering Department
Managerial Economics and Financial Analysis
CODE: 6ZC01
L T P/D C
2 1 0 2
Course Objective:
To make the students understand the concepts and principles of Business Economics at
micro level and basic principles of Financial Accounting and Analysis, which facilitate them in
making better planning and decisions.
Course Outcomes:
1) Understand the basics of Business Economics at Micro level and Demand analysis in
particular.
2) Understand Production patterns and various Costs involved.
3) Understand different types of Markets, Business organizations and Pricing strategies.
4) Enrich students with basic concepts of Financial Accounting.
5) Understand basic concepts of Depreciation and Final accounts.
6) Increase Competence of Analyzing Financial Statements.
UNIT I
INTRODUCTION TO MANAGERIAL ECONOMICS: Definition, Nature and Scope of
Business Economics–Demand Analysis: Demand Determinants, Law of Demand and its
exceptions, Elasticity of Demand and Demand Forecasting.
UNIT II
THEORY OF PRODUCTION AND COST ANALYSIS: Production Function – Isoquants
and Isocosts, Internal and External Economies of Scale, Laws of Returns. Cost Analysis: Cost
concepts, different types of costs, cost control and cost efficiency, Break-even Analysis (BEA)-
Determination of Break-Even Point (simple problems).
UNIT III
INTRODUCTION TO MARKETS: Market structures: Types of competition, Features of
Perfect competition, Monopoly and Monopolistic Competition. Pricing strategies, transfer
pricing and performance measurement, Price-Output Determination in case of Perfect
Competition and Monopoly
UNIT IV
FUNDAMENTALS OF FINANCIAL ACCOUNTING: Definition of Accounting, Concepts
and conventions, principles of Double-Entry system, Book Keeping, Overview of books of
original records Journal, Ledger and Subsidiary books
9
MECH IIYr(2017-18)
UNIT V
Depreciation of Fixed Assets and Final Accounts
Depreciation, Depreciation of fixed assets, Methods of Depreciation – Straight line method and
Diminishing Balance method
Classification of revenue and capital expenses, Trial Balance, Final Accounts - Trading Account,
Profit and Loss Account and Balance Sheet with simple adjustments.
UNIT VI
RATIO ANALYSIS: Introduction to Ratio analysis – Leverage ratios – Liquidity ratios –
Turnover ratios – Profitability ratios, Du-pont chart. (Simple problems)
Books Recommended:
References:
Ambrish Gupta, Financial Accounting for Management, Pearson Education, New Delhi.
H. Craig Peterson & W. Cris Lewis, Managerial Economics, PHI, 4th Ed.
Suma Damodaran, Managerial Economics, Oxford University Press.
10
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M L L
H: High M: Medium L: Low
Syllabus for B. Tech. II Year I semester
Mechanical Engineering Department
THERMODYNAMICS
Code: 6B305
L T P/D C
3 1 --- 3
Course Objective:
To understand the treatment of classical Thermodynamics and to apply
the First and Second laws of Thermodynamics to engineering applications
Course Outcomes:
After studying this course, the students will be able to:
1. understand the concepts like system surrounding, thermodynamic properties
2. understand and apply the fundamental laws of thermodynamics
3. understand limitations of first law and the importance of second law of T.D
4. understand the relationship between various properties of pure substances like presser
volume, temperature
5. understand the behaviour of perfect gas and the governing laws
6. understand the working principle of different air standard cycles
UNIT – I
Introduction: Basic Concepts : System, Control Volume, Surrounding, Boundaries, Universe, Types of Systems,
Macroscopic and Microscopic view points, Concept of Continuum, Thermodynamic Equilibrium, State, Property,
Process, Cycle – Reversibility – Quasi – static Process, Irreversible Process, Causes of Irreversibility – Energy in
State and in Transition, Types, Work and Heat, Point and Path function.
UNIT – II
zeroth law of thermodynamics – Concept of quality of Temperature – Principles of Thermometry – Reference Points
– Const. Volume gas Thermometer – Scales of Temperature, Ideal Gas Scale – PMM-I - Joule’s Experiments – First
law of Thermodynamics – Corollaries – First law - applied to a Process and applied to a flow system – Steady Flow
Energy Equation.
UNIT – III
Limitations of the First Law – Thermal Reservoir, Heat Engine, Heat pump, Parameters of performance, Second
Law of Thermodynamics, Kelvin-Planck and Clausius Statements and their Equivalence / Corollaries, PMM of
Second kind, Carnot’s principle, Carnot cycle and its specialties, Thermodynamic scale of Temperature, Clausius
Inequality, Entropy, Principle of Entropy Increase – Energy Equation, Availability and Irreversibility –Elementary
Treatment of the Third Law of Thermodynamics.
UNIT – IV
Pure Substances, p-V-T surfaces, T-S and h-s diagrams, Mollier Charts, Phase Transformations – Triple point at
critical state, properties during change of phase, Dryness Fraction – Clausius–Clapeyron Equation, Property tables.
Mollier charts – Various Thermodynamic processes and energy Transfer – Steam Calorimetry.
UNIT - V
Perfect Gas Laws – Equation of State, Specific and Universal Gas constants – various Non-flow processes,
properties, end states, Heat and Work Transfer, changes in Internal Energy – Throttling and Free Expansion
Processes – Flow processes –. Mixtures of perfect Gases – Mole Fraction, Mass friction Gravimetric and volumetric
Analysis – Dalton’s Law of partial pressure, Avogadro’s Laws of additive volumes – Mole fraction , Volume
11
MECH IIYr(2017-18)
fraction and partial pressure, Equivalent Gas const. and Molecular Internal Energy, Enthalpy, sp. Heats and Entropy
of Mixture of perfect Gases and Vapour,
.
UNIT – VI
Power Cycles : Otto, Diesel, Dual Combustion cycles, Sterling Cycle, Atkinson Cycle, Ericcson Cycle,–
Description and representation on P–V and T-S diagram, Thermal Efficiency, Mean Effective Pressures on Air
standard basis – comparison of Cycles.
TEXT BOOKS:
1. Engineering Thermodynamics / PK Nag /TMH, III Edition
2. Fundamentals of Thermodynamics – Sonntag, Borgnakke and Van Wylen / John Wiley & Sons (ASIA) Pvt. Ltd.
12
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H H M M L L L L
H: High M: Medium L: Low
The objective is to learn the fundamental concepts of stresses, strains, and deformation of solids with
applications to beams and columns. Fundamentals of applying equilibrium, compatibility, and force-
deformation relationships to structural elements in order to evaluate the strength of materials.
Course Outcomes:
After studying this course, the students will be able:
1. To Understand simple stresses and strains of uniform bars, cross- section varying bars,
compound bars and statically in-determinate bars
2. To Understand principle stresses, strains and torsion of circular shafts
3. To Understand Shear Force Diagrams (SFD) and Bending Moment Diagrams(BMD) for
various types of beams
4. To Understand bending stresses and shear stresses of different types of beams
5. To Understand how to determine deflections of various beams and buckling load of
slender columns.
6. To Understand how to find out various stresses that are developed in thin and thick
cylinders
UNIT – I
Simple Stresses & Strains: Elasticity, plasticity – Types of stresses-uniaxial, biaxial & triaxial and strains–Hooke’s
law, stress-strain diagram for Mild steel, Working stress, Factor of safety, Lateral strain, Poisson’s ratio, volumetric
strain, Elastic moduli & the relationship between them – Bars of varying section – composite bars – Temperature
stresses, .Strain energy – Resilience – Gradual, sudden, impact and shock loadings.
UNIT – II
Principal stresses: Normal stress , Shear stress. Principal stress & strains, Mohr’s circle and it’s application.
Torsion of shafts
UNIT – III
Shear Force and Bending Moment: Definition of beam, Types of beams, Concept of SF and BM, SF and BM
diagrams for cantilever, simply supported and overhanging beams subjected to point loads, UDL, UVL and
combination of these loads, Point of Contra flexure – Relation between SF, BM and rate of loading at a section of a
beam.
UNIT – IV
Flexural Stresses: Bending Stresses Theory of simple bending, Assumptions, Derivation of bending equation: M/I
= f/y = E/R, Neutral axis, Determination bending stresses, section modulus of rectangular and circular sections
(Solid and Hollow), I, T, Angle and Channel sections – Design of simple beam sections and Concept of uniform
beam .
Shear Stresses: Derivation of formula – Shear stress distribution across various beams sections like rectangular,
circular, triangular, I, T and H angle sections.
UNIT – V
13
MECH IIYr(2017-18)
Deflection of Beams: Bending of Beam into a circular arc – slope, deflection and radius of curvature –Differential
equation for the elastic line of a beam – Double integration and Macaulay’s methods –Determination of slope and
deflection for cantilever and simply supported beams subjected to point loads,- UDL, UVL. Mohr’s theorems –
Moment area method – application to simple cases including overhanging beams.
Theory and applications of long and short columns: Rankine and Eulers formulae, Various end constraints.
UNIT – VI
Thin Cylinders: Thin seamless cylindrical shells – Derivation of formula for longitudinal and circumferential
stresses – hoop, longitudinal and volumetric strains – changes in dia, and volume of thin cylinders – Riveted boiler
shells – Thin spherical shells.
Thick cylinders: Lame’s equation – cylinders subjected to inside & out side pressures – compound cylinders.
TEXT BOOKS:
1. Strength of materials by S.Ramamrutham
2. Strength of materials by Bhavikatti, Lakshmi publications.
REFERENCES:
1. Strength of Materials -By Jindal, Umesh Publications.
2. Analysis of structures by Vazirani and Ratwani.
3. Mechanics of Structures Vol-III, by S.B.Junnarkar.
4. Strength of Materials by S.Timshenko
5. Strength of Materials by Andrew Pytel and Ferdinond L. Singer Longman.
6. Solid Mechanics, by Popov
14
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H H M M L L L L
H: High M: Medium L: Low
X X X X
Course Objective:
Course Outcomes:
understand about entire process of dislocation contribution to the plastic deformation and in strengthening of
materials and mechanism of creep.
know about different fracture modes in industrial components during their service and failure concept under
fatigue in materials.
acquire the knowledge of finding number of phases and the amount of phases by using Lever Rule and draw &
analyze phase diagram for different binary alloys and concept of nucleation and growth of crystals and
applications of some important nonferrous metals in industrial, applications in wrought and cast condition.
acquire the knowledge of important phase diagram Fe-Fe3C diagram and different cast irons and their
applications in industry.
acquire the knowledge of different industrial heat treatment processes; surface hardening processes how the
mechanical properties vary with different heat treatment processes.
understand the advanced materials and their various applications in aerospace, marine and automobiles.
UNIT-I
Mechanical Behavior of Metals:
Slip systems in B.C.C,F.C.C and H.C.P.Deformation behavior of BCC, FCC and HCP crystal structures.Theoretical
shear strength of the material comparison to actual strength of various metal systems.Dislocation theory and slip
phenomenon;Frank-Read Source of dislocation ;Dislocation pile-up ;Theory of strain hardening:Temperature
effect on deformation and strain hardening;Concept of single and polycrystals; Effect of grain size on ductility of
metal; Theory of cold-working and hot-working; Intermediate annealing Recovery, Recrystallization and grain
growth, Recrystallization temperature.Definition of creep ,mechanism of creep , and creep curve.
UNIT II
Fracture: Types of fracture Brittle & ductile fractures in Tension, Compression and pure Torsion. Fatigue and
Theory of Fracture: S-N curve, types of fatigue loading, effect of mean stress on fatigue. Types of Fracture
surfaces :Fatigue and creep fracture surfaces.
UNIT III
Solidification of Metals and Binary alloys: Concepts of nucleation & grain growth; directional-solidification;
dendritic growth and equiaxed grain growth. Phase rule, invariant reactions (eutectic, eutectoid, peritectic,
peritectoid); Lever rule, cooling-curves of pure metals, binary alloys. Binary Phase diagrams (Aluminum-Silicon
and Aluminum-Copper, Copper –Zinc, Copper –Tin, Copper-Nickel.
15
MECH IIYr(2017-18)
Non ferrous Metals & Alloys: Aluminum based alloys: Cast alloys, Wrought alloys and their applications. Copper
based alloys: Brasses, Bronzes and their applications. Magnesium based alloys: Cast alloys, wrought alloys and their
applications. Titanium based alloys: aerospace alloys, bio-compatible alloys. Nimonic alloys – their compositions
and applications. Heat treatment of Non-ferrous metals, Age hardening, solution hardening.
UNIT IV
Fe-Fe3C phase diagram: and description of phases (Ferrite, Austenite, Cementite, Pearlite, hypo and hyper
eutectoid steels; hypo and hyper eutectic cast irons). Steels: (low carbon, medium carbon, high carbon, stainless,
Hadfield, High speed) steels, their compositions, microstructures and applications. Cast Irons: Types of cast irons;
compositions, microstructures and applications of (Grey, White, Spheroidal graphite, Malleable) Cast Irons.
UNIT V
Heat Treatment: Steels: Types of Heat-treaments (Annealing, Tempering, Normalizing, Hardening, Spherodizing);
TTT diagram; Effect of cooling rate on the phase-transformations; case-hardening methods (carburizing, Nitriding,
carbo-nitriding, cyaniding, shot-peening, Induction Hardening, Flame Hardening). Materials used, their
Composition, Microstructure and Heat treatments for the following Mechanical components: shafts, spindles, rolling
element bearings, journal bearings, gears, fly wheels, beds and columns, tool steels, press tools etc.,
UNIT VI
An Introduction to Advanced Materials: Composites: Classification, Metal Matrix Composites (MMCs),
Cermets, C-C composites, Polymer matrix composites; applications of various composites. Introduction, and
applications of SMART Materials, Cermets , Maraging steels and Nanomaterials..
TEXT BOOKS:
1. Physical Metallurgy principals by Read Hill
2. Introduction to Physical Metallurgy / Sidney H. Avner – Design Data handbook
REFERENCES:
16
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H L M L
H: High M: Medium L: Low
Course Objectives:
To understand the basic principles of fluid mechanics and types of flows. To understand boundary
layer concepts and flow through pipes. Evaluate the performance of hydraulic turbines and
characteristic curves of pumps.
Course Outcomes:
After studying this course, the students will be able to:
1. understand the fluid properties and measurement of pressure with monometers.
2. Understand the classification of fluid, Bernoulli’s equation, momentum equation and
their applications
3. understand Reynolds’s experiment, major losses, minor losses
4. understand velocity triangle, work done calculations, elements of Hydroelectric power
plant, pump storage plant.
5. Understand the classifications of turbines working principles of turbines, draft tube
theory, performance of turbine.
6. Understand various types of pumps working principle of reciprocating pump, centrifugal
pump, performance characteristics of centrifugal pump.
UNIT I
Fluid statics : Dimensions and units: physical properties of fluids- specific gravity, viscosity
surface tension- vapor pressure and their influence on fluid motion- atmospheric gauge and
vacuum pressure – measurement of pressure- Piezometer, U-tube and differential manometers.
UNIT II
Fluid kinematics : Stream line, path line and streak lines and stream tube, classification of
flows-steady & unsteady, uniform, non uniform, laminar, turbulent, rotational, and irrotational
flows-equation of continuity for one dimensional flow and three dimensional flow.
Fluid dynamics : Surface and body forces –Euler’s and Bernoulli’s equations for flow along a
stream line, momentum equation and its application on force on pipe bend.
UNIT III
Closed conduit flow: Reynold’s experiment- Darcy Weisbach equation- Minor losses in pipes-
pipes in series and pipes in parallel- total energy line-hydraulic gradient line.
Measurement of flow: pitot tube, venturimeter, and orifice meter, Flow nozzle
Boundary Layer theory
UNIT IV
Basics of turbo machinery : Hydrodynamic force of jets on stationary and moving flat, inclined,
and curved vanes, jet striking centrally and at tip, velocity diagrams, work done and efficiency,
flow over radial vanes, Layout of hydroelectric power plant.
17
MECH IIYr(2017-18)
TEXT BOOKS :
1. Hydraulics, fluid mechanics and Hydraulic machinery MODI and SETH.
2. Fluid Mechanics and Hydraulic Machines by Rajput.
REFERENCES :
1. Fluid Mechanics and Fluid Power Engineering by D.S. Kumar, Kotaria & Sons.
2. Fluid Mechanics and Machinery by D. Rama Durgaiah, New Age International.
3. Hydraulic Machines by Banga & Sharma, Khanna Publishers.
4..Hydraulic Machines Including Fluidics PB by Jagdish Lal Metropolitan Book Co. Pvt. Ltd. ,
1994.
18
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H L M L
H: High M: Medium L: Low
Course Objectives:
To understand the basic principles of fluid mechanics and types of flows. To understand boundary
layer concepts and flow through pipes. Evaluate the performance of hydraulic turbines and
characteristic curves of pumps.
Course Outcomes:
List of Experiments:
1. Verification of Bernoulli’s Theorem
2. Calibration of Venturimeter
3. Calibration of Orifice meter
4. Calibration of Rotameter
5. Calibration of Flow Nozzle
6. Determination of friction factor for a given pipe line
7. Determination of loss of head due to sudden contraction in a pipeline.
8. Performance Test on Single Stage Centrifugal Pump
9. Performance Test on Multi Stage Centrifugal Pump.
10. Performance Test on Reciprocating Pump.
11. Impact of jets on Vanes
12. Performance Test on Pelton Wheel.
13. Performance Test on Francis Turbine.
19
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H L M L
H: High M: Medium L: Low
Course Outcomes:
Compute the flash and fire point using Abels Apparatus
Compute the flash and fire point using Pensky Martens Apparatus
Compute the Viscosity using Saybolt Viscometer
Compute the Calorific value using Bomb Calorimeter
List of Experiments:
20
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
M H
H: High M: Medium L: Low
Course Outcomes:
1. Metallographic Preparation and microstructural study of pure metals (Fe, Cu, Al)
2. Metallographic Preparation and microstructural study of mild steel, low-carbon steel, high carbon steel
3. Microstructural study of Cast Iron
4. Microstructural study of Heat treated Steels
5. Jominy End quench test (hardness of the samples to be tested in “Mechanics of Solid Lab)
6. Melting of aluminum ( or its alloy) and casting in sand molds, chilled sand molds and steel molds, and
microstructural study of the samples ( Hardness study of the samples will be done in “ Mechanics of Solids
Lab )
21
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
M H L
H: High M: Medium L: Low
Mechanical Engineering
Code : 6B376 MECHANICS OF SOLIDS LAB
L T P/D C
--- ---- 2 1
Course Objective:
The objective is to learn the fundamental concepts of stresses, strains, and deformation of solids with
applications to beams and columns. Fundamentals of applying equilibrium, compatibility, and force-
deformation relationships to structural elements in order to evaluate the strength of materials.
Course Outcomes:
22
MECH IIYr(2017-18)
L T P/D C
--- --- 2 1
a b c d e f g h i j k l m
x x x x x
Course Outcomes:
Procedure:
1. Seminar in-charges shall highlight the significance of Technical Seminar in the first two
sessions and enlighten the students on the utility of these seminars.
2. The slots, titles shall be decided upfront and seminar In-charge shall take signatures from
students.
1. The same sheet shall be affixed in the respective classrooms and seminar register.
2. If any student fails to present his/her seminar on the given slot, to genuine reasons, they
may be asked to present in the subsequent slot / week.
3. Progress of the seminars needs to be reviewed by the concerned HOD once in 15 days.
4. The evaluation for Technical Seminars has to be informed to students and displayed in
the classrooms.
5. Report and presentation must contain topic, introduction, explanation, diagrams, tables,
applications and conclusions.
Distribution of Marks
23
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M
H: High M: Medium L: Low
Understand and learn the basic concepts of probability, probability distributions, sampling
distributions and estimation, correlation and find the regression, Understand the concepts of
testing the hypothesis of population parameters, design of experiments and quality control.
Course Outcomes: After learning the contents of this course, the student must be able to
UNIT-I
Probability: The Axioms of probability, Addition theorem, conditional probability, Multiplication
theorem, Baye’s Theorem. Random variable – Discrete and Continuous, probability mass and density
functions, expectation and variance.
UNIT-II
Probability Distributions: Binomial, Poisson and Gaussian (Normal) distribution–Related properties.
UNIT-III
Sampling Distributions: Populations and samples, Sampling distribution of the Mean ( - known) and the
sampling distribution of the mean (-unknown), sums and differences, Central limit theorem.
Estimation- Point Estimation and Interval Estimation concerning means.
UNIT-IV
Correlation and Regression: Types of correlation, coefficient of correlation, Properties. Karl Pearson’s
correlation coefficient, Spearman’s rank correlation, linear regression, introduction to multiple
regressions.
UNIT-V
Inferences Concerning Means and Proportions:
24
MECH IIYr(2017-18)
Tests of Hypothesis, Type–I and Type-II Errors, Hypothesis testing concerning to one mean and two
means of large and small size samples. Test of Hypothesis Concerning to one Proportion and difference
of proportions of large samples.
Test of significance: 2 test-Goodness of fit, Independence of Attributes, F-Test and Elements of
ANOVA (one way).
UNIT-VI
Statistical Design of experiments: Basic concepts of CRD, RBD and Latin square designs.
Quality Control: Control Charts –Control lines, determination of control limits, Types of control
charts- Control charts for variables ( mean chart, Range chart) – charts for attributes (fraction
defective, no. of defectives and defects for unit)
Text Books:
1. Probability and Statistics for Engineers: Miller and John E. Freund, PHI Publishers, 9 th
Edition.
2. Introduction to Probability and Statistics, William Mendenhall, Cengage Learning.
3. Probability and Statistics for Science and Engineering, G.Shnaker Rao, University Press.
4. Fundamentals of Mathematical Statistics, Gupta and Kapoor – S. Chand and Co.
5. Statistical Quality Control, M.Mahajan, Dhanpat Rai & Sons
REFERENCE BOOKS:
1. Probability and Statistics for Engineering and the Sciences, Jay L.Devore, Cengage learning.
2. Probability and statistics, G.S.S Bhishma Rao, fifth edition, Scitech Publication.
25
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M
H: High M: Medium L: Low
Course Objective:
To understand the working principles of 2-stroke and 4-stroke cycles, combustion processes of
S.I and C.I Engines, working principles of compressors.
Course Outcomes:
UNIT – I
Actual Cycles and their Analysis: Introduction, Comparison of Air Standard and Actual Cycles, Time Loss Factor,
Heat Loss Factor, Exhaust Blow down - Loss due to Gas exchange process, Volumetric Efficiency, Loss due to
Rubbing Friction, Actual and Fuel-Air Cycles of CI Engines.
UNIT-II
I.C. Engines : Classification - Working principles, Valve and Port Timing Diagrams, Air Standard, Air-fuel and
Actual cycles - Engine systems – Fuel Carburetor, Fuel Injection System, Multipoint fuel Injection, Ignition,
Cooling and Lubrication.
UNIT – III
Combustion in S.I. Engines : Normal Combustion and Abnormal combustion – Importance of flame speed and
effect of engine variables – Type of Abnormal combustion, pre-ignition and knocking (explanation of ) – Fuel
requirements and fuel rating, anti knock additives – combustion chamber – requirements, types.
Combustion in C.I. Engines : Four stages of combustion – Delay period and its importance – Effect of engine
variables – Diesel Knock– Need for air movement, suction, compression and combustion induced turbulence – open
and divided combustion chambers and nozzles used – fuel requirements and fuel rating.
26
MECH IIYr(2017-18)
UNIT – IV
Testing and Performance : Parameters of performance - measurement of cylinder pressure, fuel consumption, air
intake, exhaust gas composition, Brake power – Determination of frictional losses and indicated power –
Performance test – Heat balance sheet and chart.
UNIT – V
Compressors – Classification –positive displacement and roto-dynamic machinery – power absorbing machines,
fan such as blower and compressor – reciprocating and rotary types.
Reciprocating: Principles of operation, work required, Isothermal efficiency, volumetric efficiency and effect of
clearance, stage compression, under cooling, saving of work, minimum work condition for stage compression.
UNIT VI
Centrifugal Compressors: Mechanical details and principle of operation – velocity and pressure variation. Energy
transfer-impeller blade shape- losses, slip factor, power input factor, pressure coefficient and adiabatic coefficient –
velocity diagrams – power input calculations.
Axial Flow Compressors: Mechanical details and principle of operation – velocity triangles and energy transfer per
stage, degree of reaction, work done factor - isentropic efficiency- pressure rise calculations – Polytropic efficiency.
TEXT BOOKS:
REFERENCES:
27
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M
H: High M: Medium L: Low
Course Objective:
Understand the idea for selecting materials for patterns. Types and allowances of patterns used in
casting and analyze the components of moulds. Design core, core print and gating system in metal
casting processes Understand arc, gas, solid state and resistance welding processes. Develop process-
maps for metal forming processes using plasticity principles. Identify the effect of process variables
to manufacture defect free products.
Course Outcomes:
After studying this course, the students will be able to:
UNIT – II
Solidification of casting – Concept – Solidification of pure metal and alloys, short & long freezing range alloys,
Risers – Types, function and design, - Problems on Riser Design, Special casting processes: CO2 moulding, Shell
moulding, Centrifugal casting, Die casting, and Investment casting,Casting defects,
UNIT – III
Metal Forming Process: Advantages of forming operations, Nature of plastic deformation, hot working and cold
working
Rolling: Rolling fundamentals, Rolled Products, Theory of rolling, Types of Rolling mills and products, Forces in
rolling and power requirements - Problems
UNIT – IV
28
MECH IIYr(2017-18)
Forging: Basic forging operations, Forging types: Smith, Drop, Press & Machine Forging, Forging hammers &
Presses, Roll forging, Rotary forging, Forging defects.
Extrusion: Basic extrusion process and its characteristics. Hot extrusion and cold extrusion - Forward extrusion and
backward extrusion, Impact extrusion, Hydrostatic extrusion
UNIT- V
Sheet-Metal Operations: Classification, Springback in metals, Press operations: Blanking, Piercing and other
operations, Clearance and Shear in press operations, Forces and power requirement in press operations-Problems,
Bending: Nomenclature, Types of bending dies, Bend allowance and force-Problems Spinning, Stretch forming,
Embossing and Coining.
Plastics: Processing of Plastics: Injection moulding, Blow moulding, Compression moulding, and Transfer
moulding
UNIT - VI
Metal Fabrication Process: Introduction to fabrication process, classification
Welding : Classification of welding processes, types of welded joints, Welding terms, Gas welding: Flame types,
Arc welding: AC & DC, V-I Characteristics-Problems, Resistance Spot welding, Thermit-welding, Inert Gas
welding: TIG & MIG welding, Friction welding, Explosive welding, Laser welding
Soldering & Brazing, Welding defects – causes and remedies.
TEXT BOOKS:
1. Manufacturing Technology / P.N. Rao/TMH
2. Manufacturing Engineering and Technology/Kalpakjian S/ Pearson Education
REFERENCES:
1. Principles of Metal Castings / Rosenthal/Mc Graw Hill Professional
2. Welding Engineering and Technology / RS Parmar / Khanna Publishers
3. Production Technology /Sharma P C/Chand Publishers
29
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M
H: High M: Medium L: Low
Syllabus for B. Tech. II Year II semester
Mechanical Engineering
Elements of Electrical and Electronics Engineering
Code: 6AC48
L T P/D C
2 2 --- 2
Course Objective:
Course Outcomes:
CO’s: after studying this course, the student will be able to
UNIT IV-DIODE: Overview of Semiconductors, PN junction diode and Zener diode –Diode circuits: rectifiers
(bridge type only), filters, clippers and clampers.
UNIT V- TRANSISTOR: BJT construction, operation, characteristics (CB, CE and CC configurations) and uses –
JFET and MOSFET construction, operation, characteristics (CS configuration) and uses.
UNIT VI-DIGITAL ELECTRONICS :Number systems – binary codes –binary arithmetic - Boolean algebra, laws
& theorems - simplification of Boolean expression using K maps - logic gates - implementation of Boolean
expressions using logic gates - standard forms of Boolean expression.
Text Books:
1. Basic Electrical Engineering –T.K. Nagesarkar and M.S. Sukhja, Oxford University Press.2 nd edition.
2. Basic electrical Engineering – M.S. Naidu and S. Kamakshiah – TataMcGraw-Hill, 2005 edition.
30
MECH IIYr(2017-18)
3. Basic Electrical & Electronics Engineering –T.K. Nagesarkar and M.S. Sukhja, Oxford University Press.2 nd
edition.
4. Principles of Electronics - V.K.Mehta, S.Chand Publications, 2nd edition.
References:
1. Theory and problems of Basic electrical Engineering- D.P.Kotahari & I.J.Nagrath PHI.
Electronic Devices and Circuits, Millman & Halkias, TMH publications.
31
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
M H
H: High M: Medium L: Low
UNIT II:
32
MECH IIYr(2017-18)
Introduction to the Relational Model – Integrity Constraint Over relations – Enforcing Integrity
constraints – Querying relational data – Logical data base Design – Introduction to Views – Destroying
/altering Tables and Views.
Relational Algebra – Selection and projection set operations – renaming – Joins – Division – Examples of
Algebra overviews – Relational calculus – Tuple relational Calculus – Domain relational calculus –
Expressive Power of Algebra and calculus.
Application-Student database design.
UNIT III:
Form of Basic SQL Query – Examples of Basic SQL Queries – Introduction to Nested Queries –
Correlated Nested Queries Set – Comparison Operators – Aggregative Operators – NULL values –
Comparison using Null values – Logical connectivity’s – AND, OR and NOT – Impact on SQL
Constructs – Outer Joins – Disallowing NULL values – Complex Integrity Constraints in SQL Triggers,
Embedded SQL.
Application-working with Aviation company database.
UNIT IV:
Schema refinement – Problems Caused by redundancy – Decompositions – Problem related to
decomposition – reasoning about FDS – FIRST, SECOND, THIRD Normal forms – BCNF – Lossless
join Decomposition – Dependency preserving Decomposition – Schema refinement in Data base Design –
Multi valued Dependencies – FORTH Normal Form.
Application-Faculty Evaluation Report.
UNIT V :
Transaction Concept- Transaction State- Implementation of Atomicity and Durability – Concurrent –
Executions – Serializability- Recoverability – Implementation of Isolation – Testing for serializability-
Lock –Based Protocols – Timestamp Based Protocols- Validation- Based Protocols – Multiple
Granularity, Recovery and Atomicity – Log – Based Recovery – Recovery with Concurrent Transactions
– Buffer Management – Failure with loss of nonvolatile storage-Advance Recovery systems- Remote
Backup systems,
Application-Production Management System.
UNIT VI :
Data on External Storage – File Organization and Indexing – Cluster Indexes, Primary and Secondary
Indexes – Index data Structures – Hash Based Indexing – Tree base Indexing – Comparison of File
Organizations – Indexes and Performance Tuning- Intuitions for tree Indexes – Indexed Sequential
Access Methods (ISAM) – B+ Trees: A Dynamic Index Structure, Query Optimization techniques.
Application – Creating B+ tree on Instructor File.
. TEXT BOOKS :
1. Data base System Concepts, Silberschatz, Korth, McGraw hill, V edition.
2. Data base Management Systems, Raghurama Krishnan, Johannes Gehrke, TATA McGrawHill 3rd
Edition
3. Database Management Systems, Peter Rob, A.Ananda Rao,Carlos Coronel ,CENGAGE Learning
REFERENCES :
1. Data base Systems design, Implementation, and Management, Peter Rob & Carlos Coronel 7th Edition.
2. Fundamentals of Database Systems, Elmasri Navrate Pearson Education
3. Introduction to Database Systems, C.J.Date Pearson Education
33
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
Course outcomes:
1. Demonstrate a breadth of knowledge in biology
2. Overview of Biomolecules and in biological significance
3. Knowledge about different human physiological system and its working
4. Overview of biomedical instrumentations and its working about EEG, EEG and X ray machines
5. Introduction to Mechanochemistry and various instrumentation inspired by nature
6. Overview of Nano-Biotechnology and its various applications
Unit V Mechanochemistry
Molecular machines/ motors- Engineering design inspired by examples in biology, biosensors
and its applications in medicine, health care and industrial monitoring
Unit VI Nano-Biotechnology:
34
MECH IIYr(2017-18)
TEXT BOOKS:
Satyanarayana, U. “Biotechnology”, 4th Edition, Books and Allied Pvt. Ltd. Kolkata, 2007.
Lehninger A.L,
Nelson D.L, Cox .M.M, “Principles of Biochemistry”,. CBS Publications 1993
REFERENCE:
Biosensors, Elizabeth A. H. Hall, open University Press Biotechnology Series
35
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
6ZC04 L T P C
2 1 - 2
Course Objective:
This course helps to provide the basic concepts of Enterprise Resource Planning and
Management of Information System. This course will enable the students to study areas of BPR,
ERP Modules, and types of information systems, security controls, and audit. This course
explores the nature and applications of ERP &MIS.
UNIT I
INTRODUCTION TO ERP: Overview of ERP, MRP, MRPII and Evolution of ERP,
Integrated Management Systems, Reasons for the growth of ERP, Risks of ERP.
UNIT II
ERP & RELATED TECHNOLOGY: Introduction to BPR, BPR process; ERP System
Options and Selection, ERP proposal Evaluation.
UNIT III
ERP MODULES- I: Finance, Accounting Systems, Manufacturing and Production Systems.
UNIT IV
ERP MODULES- II: Sales and Distribution Systems, Human Resource Systems, Plant
Maintenance System, Materials Management System.
UNIT V
ERP IMPLEMENTATION AND MAINTENANCE: Implementation challenges, ERP
Implementation strategies, ERP Implementation life cycle- Pre evaluating screening, Package
evaluation-Project planning Phase- GAP Analysis- Reengineering, Configuration-Team
Training-Testing & Going Live, Maintaining ERP.
UNIT VI
BENEFITS OF ERP: Reduction of Lead Time, On-Time Shipment, Reduction in Cycle Time,
Improved Resource Utilization, Better Customer Satisfaction, Improved Supplier Performance,
Increased Flexibility, Reduced Quality Costs, Improved Information Accuracy and Design
Making Capabilities.
Text Books:
36
MECH IIYr(2017-18)
References:
37
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M L
H: High M: Medium L: Low
L T P/D C
2 1 -- 2
Course Objectives:
To provide the knowledge on principles of smart materials, their functions and applications.
Course Outcomes:
UNIT - I
Introduction: Characteristics of composites and ceramics materials, Electro-magnetic materials and
shape memory alloys-processing and characteristics
UNIT - II
Sensing And Actuation: Principles of electromagnetic, acoustics, chemical and mechanical sensing and
actuation, Types of sensors and their applications, their compatibility conventional and advanced
materials. principles and characterization.
UNIT - III
Control Design: Design of shape memory alloys, Types of MR fluids, Characteristics and application,
principles of MR fluid value designs, Magnetic circuits, MR Dampers, Design issues.
UNIT - IV
Optics And Electromagnetic: Principles of optical fiber technology, characteristics of active and
adaptive optical system and components, and manufacturing principles.
38
MECH IIYr(2017-18)
UNIT - V
Structures: Principles of drag and turbulence control through smart skins, applications in environment
such as aerospace and transportation vehicles, manufacturing, repair and maintainability aspects.
Controls: Principles of structural acoustics analog and digital feedback controls, Dimensional
implications for structural control.
UNIT - VI
Principles Of Vibration And Modal Analysis: PZT Actuators, MEMS, Magnetic shape Memory
Alloys, Characteristics and Applications.
Information Processing: Neural Network, Data Visualisation and Reliability – Principles and
Application domains.
TEXT BOOKS:
1. Analysis and Design’, A. V. Srinivasan, ‘Smart Structures –Cambridge Universities Press,
New York, 2001, (ISBN :
0521650267)
2. ‘Smart Materials and Structures’, M V Gandhi and B S Thompson Chapmen & Hall,
London, 1992 (ISBN : 0412370107)
133
REFERENCE BOOKS:
1. ‘Smart Materials and Structures’, Banks HT, RC Smith, Y Wang,Massow S A, Paris 1996
2. G P Gibss’Adaptive Structres’, Clark R L, W R Saunolers, JhonWiles and Sons, New York,
1998
3. An introduction for scientists and Engineers’, Esic Udd, OpticSensors : Jhon Wiley &
Sons, New York, 1991 (ISBN :0471830070)
39
MECH IIYr(2017-18)
Programme Outcomes
1 2 3 4 5 6 7 8 9 10 11 12
H M
H: High M: Medium L: Low
Code: 6CC54
L T P/D C
2 1 -- 2
Course Objectives:
The objectives of this course is to provide the students an overview of basic combinational and
sequential circuits and also basic architecture and programming of 8086 microprocessor
Course Outcomes:
UNIT – I
Number System:
Binary, decimal, octal, hexa decimal, weighted and un-weighted codes.Boolean Algebra:
Axiomatic definition of Boolean algebra, Binary operators, postulates of and theorems.Boolean
addition, subtraction, 1’s complement, 2’s complement. Switching functions, Canonical forms
and Standard forms, Simplification of switching functions using theorems.
UNIT – II
Logic gates:
Basic gates and universal gates.
Minimization of Switching Functions: Karnaugh map method, Prime implicants, don’t care
combinations, Minimal SOP and POS forms, Quine-McCluskey Tabular Method, Prime
Implicant chart, simplification rules.
UNIT - III
Combinational Logic Design:
40
MECH IIYr(2017-18)
Single output and multiple output combinational logic circuit design, AND-OR, OR-AND, and
NAND/NOR realizations, Exclusive-OR and Equivalence functions, Binary adders/subtractors,
Encoder, Decoder, Multiplexer, Demultiplexer, MUX realization of switching functions, Parity
bit generator, Code-converters, Contact Networks, Hazards and hazard free realizations.
Applications: Design of a 16-bit Magnitude Comparator.
UNIT - IV
Sequential Circuits 1:
Classification of sequential circuits (Synchronous, Asynchronous Pulse mode, and Level mode
with examples). Basic flip-flops-Triggering and excitation tables. Conversions of flip flops,
Design of simple synchronous sequential circuits such as counters, shift registers
UNIT - V
Architecture of 8086 Microprocessor: Memory segmentation, BIU and EU. General purpose
registers. 8086 flag register and function of 8086 Flags. Pin diagram of 8086-Minimum mode
and maximum mode of operation. Timing Diagram.
Instruction set of 8086: Addressing modes of 8086. Assembler directives. Simple programs,
procedures, and macros. Assembly language programs involving logical, Branch & Call
instructions, sorting, evaluation of arithmetic expressions, string manipulation. Introduction to
DOS and BIOS interrupts.
Applications: Design of an 8-bit Calculator
UNIT - VI
Interfacing with 8086: Interfacing with RAMs, ROMs along with the explanation of timing
diagrams. 8255 PPI – various modes of operation. Interfacing with key boards, ADCs, and DACs
Stepper Motor .Interrupt structure of 8086. Vector interrupt table. Interrupt service routines.
8259 PIC Architecture and interfacing cascading of interrupt controller and its importance.
Applications: Interfacing of a Temperature sensor with 8086
Text Books:
1. Morris Mano-,Digital design –PHI, 2nd Edition.
2. Zvi Kohavi and Niraj K Jha -Switching & Finite Automata theory – Cambridge, 3rd
Edition.
3. Subrata Ghoshal, Digital Electronics,2012, Cengage Learning
4. Advanced microprocessor & Peripherals - A.K.Ray & K.M.Bhurchandi, TMH, 2000.
5. Microprocessors and interfacing – Douglas V. Hall, TMH, 2nd Edition, 1999.
References:
1.Fletcher -An Engineering Approach to Digital Design – PHI.
2.Fundamentals of Logic Design, Roth, Kenny, Seventh Edition, Cengage Learning
3.R.P.Jain-Switching Theory and Logic Design- TMH Edition,2003.
4.John M. Yarbrough -Digital Logic Applications and Design – Thomson Publications, 2006
5. CVS Rao -Switching Theory and Logic Design –Pearson Education, 2005
6. Micro computer systems, The 8086/8088 Family Architecture, Programming and Design
– Y.Liu and G.A. Gibson, PHI, 2nd Edition.
41
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
UNITE – 2
GRAMMAIRE : Articles définis et indéfinis, genre et nombre des noms et des
Adjectifs, interrogation et négation, conjugaison du présent.
UNITE – 3
COMMUNICATION : Faire connaissance, inviter et répondre à une invitation, décrire
les personnes.
SCHEME OF EXAMINATION:
Internal Assessment 30 marks
Written Examination - 20 marks
Viva Voce - 10 marks
Final Written Examination: Grammar, Communication & Translation 70marks
Written Examination - 50 marks Viva voce -20 marks
42
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H
H: High M: Medium L: Low
Syllabus for B. Tech. II Year II semester
Mechanical Engineering
MACHINE DRAWING AND COMPUTER DRAWING
Code:6B412
L T P/D C
1 2 4 3
Course Objective:
To familiarize with the standard conventions for different materials and machine parts in working
drawings. To make part drawings including sectional views for various machine elements. To
prepare assembly drawings given the details of part drawings.
Course Outcomes:
After studying this course, the students will be able to:
Understand the principles and requirements of the machine drawings.
Understand the various symbols used in machine drawing.
Understand the principles and requirements of various Assembly drawings.
Drawing of different machine components
Imagine and drawing the assembly by seeing the components given.
Ability to understand the existing geometric modeling and develop a geometric modeling
for a new component in design process
Screws jack, Tailstock, Machine Vice, Plummer block, foot step bearing - Drawings of assembled views for the part
drawings using conventions and easy drawing proportions
UNIT-VI :Computer Aided 2D Drafting:
1.Introduction to Auto CAD, Setting up drawing environment, Command and System variables,
Coordinate system.
2. Creating graphic primitives like Point, Line, Planes, Circle, Arc, Annotation etc.
3. Creating and editing 2D object, Layers and object Properties. Creating dimensions, Blocks and
External reference.
4. Creating a layout to plot, documents, file formats.
NOTE: First angle projection to be adopted. The student should be able to provide working drawings of actual
parts.
TEXT BOOKS:
1. Machine Drawing – Dhawan, S.Chand Publications
2. Machine Drawing –K.L.Narayana, P.Kannaiah & K. Venkata Reddy / New Age/ Publishers
3. Shan Tickoo, “Auto CAD 2011: A Problem Solving Approach”, Autodesk Press USA.
4. Shan Tickoo, “Customizing Auto CAD 2011”, Delmar Cengage Press USA.
REFERENCES:
1. Machine Drawing – P.S.Gill.
2. Machine Drawing – Luzzader
3. Machine Drawing – Rajput
4. Machine Drawing – ND Bhat
44
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H M
H: High M: Medium L: Low
Syllabus for B. Tech. II Year II semester
Mechanical Engineering
Java Programming
Code: 6EC70
L T P/D C
2 2 - 2
Course Objectives :
Understand the object oriented programming concepts
Understand the importance of interface, inheritance, Exception handling and multi
threading
Understand the event handling mechanism
Implementation of user defined packages, GUI and applets
Course Outcomes :
After completing the subject, students will be able to:
Understand the concept of OOP as well as the purpose and usage of principles of
inheritance, Identify classes, objects, members of a class and the relationships among
them needed for a specific problem.
Understand and implement concepts of polymorphism, encapsulation and method
overloading.
Create Java application programs using sound OOP practices (e.g., interfaces and APIs)
and proper program structuring (e.g., by using access control identifiers, automatic
documentation through comments)
Students understand and implement error exception handling and multi-threading.
Students learn to create GUI and write programs for event-handling using various user
interface components on applets.
UNIT-I
History of Java, Java buzzwords, datatypes, variables, simple java program,scope and life time
of variables,operators, expressions, control statements, type conversion and costing, arrays,,
classes and objects – concepts of classes, objects, constructors, methods, access control, this
keyword, overloading methods and constructors, string handling, StringTokenizer.
UNIT-II
Inheritance –Definition ,single inheritance , benefits of inheritance, Member access rules, super
class, polymorphism- method overriding, Dynamic method dispatch, using final with inheritance,
abstract class, Base class object.
UNIT-III
Interfaces : definition, variables and methods in interfaces , differences between classes and
interfaces, usage of implements and extends keyword, uses of interfaces.
Packages: Definition, types of packages, Creating and importing a user defined package.
Applications using interface .Applications using packages
45
MECH IIYr(2017-18)
UNIT-IV
Exception handling -exception definition, benefits of exception handling, exception hierarchy,
usage of try, catch, throw, throws and finally, built in exceptions, creating user defined
exceptions.
Multi-Threading:-Thread definition, types of multitasking, uses of multitasking, thread life cycle,
creating threads using Thread class and Runnable interface, synchronizing threads, daemon
thread.
Applications of multithreading.
UNIT-V
Advantages of GUI over CUI ,The AWT class hierarchy, Component, Frame, user interface
components- labels, button, scrollbars, text components, check box, check box groups, choices,
lists panels – scrollpane, menubar, graphics, layout, managers –boarder, grid, flow and card
layouts.
Applications: developing calculator, developing feedback form, developing biodata.
UNIT-VI
Event handling: Delegation event model, closing a Frame, mouse and keyboard events, Adapter
classes.
Applets – Concepts of Applets, differences between applets and applications, life cycle of an
applet, types of applets, creating applets, passing parameters to applets.
Applications: Developing of simple advertisements.
TEXT BOOKS
1. Java; the complete reference, 6th editon, Herbert schildt, TMH.
2. Introduction to Java programming 6th edition, Y. Daniel Liang, pearson education.
REFERENCES
1. Core Java 2, Vol 1, Fundamentals, Cay.S.Horstmann and Gary Cornell, seventh Edition,
Pearson Education.
2. Core Java 2, Vol 2, Advanced Features, Cay.S.Horstmann and Gary Cornell,Seventh Edition,
Pearson Education
46
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H M L
H: High M: Medium L: Low
Syllabus for B. Tech. II Year II semester
Mechanical Engineering
MANUFACTURING PROCESSES LAB
Code: 6B477
L T P/D C
--- --- 3 2
Course Objective:
Understand the idea for selecting materials for patterns. Types and allowances of patterns used in
casting and analyze the components of moulds. Design core, core print and gating system in metal
casting processes Understand arc, gas, solid state and resistance welding processes. Develop process-
maps for metal forming processes using plasticity principles. Identify the effect of process variables
to manufacture defect free products.
COURSE OUTCOMES:
II Welding Lab:
1. ARC Welding- Lap & Butt Joint - 2 Exercises
2. Spot Welding - 1 Exercise
3. TIG Welding - 1 Exercise
4. Plasma welding and Brazing - 2 Exercises
(Water Plasma Device)
IV Processing Of Plastics:
1. Injection Moulding
2. Blow Moulding
47
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
Electrical Experiments
Electronics Experiments
48
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H M
H: High M: Medium L: Low
2.A) Define a class to represent a bank account and include the following members Instance
variables:
(i)Name of depositor
(ii)Account No
(iii)Type of account
(iv)Balance amount in the account
Instance Methods:
To assign instance variables (Constructors-Zero argument and parameterized)
1. To deposit an amount
2. To withdraw amount after checking the balance
(iv) To display name and address
Define ExecuteAccount class in which define main method to test above class.
B) In the above account class, maintain the total no. of account holders present in the
bank and also define a method to display it. Change the main method appropriately.
C) In main method of ExecuteAccount class, define an array to handle five accounts.
D) In Account class constructor, demonstrate the use of “this” keyword.
E) Modify the constructor to read data from keyboard.
F) Overload the method deposit() method (one with argument and another without
argument)
G) In Account class, define set and get methods for each instance variable.
49
MECH IIYr(2017-18)
Example:
For account no variable, define the methods
getAccountNo() and setAccountNo(int accno)
In each and every method of Account class, reading data from and writing data to instance
variables should be done through these variables.
.
4 .A) Write a program to demonstrate method overriding.
B) Write a program to demonstrate the uses of “super” keyword (three uses)
C) Write a program to demonstrate dynamic method dispatch (i.e .Dynamic polymorphism).
50
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H M H M L L
H: High M: Medium L: Low
Course Objective :
Evaluate, comprehend and assess of the concepts and the knowledge gained in the core courses
of the first and the second year.
Course Outcome :
1. Comprehend the concepts in the core and elective courses.
2. Exhibit technical knowlegde to face interviews.
3. Exhibit life long Learning skills for higher education and to persue Professional practice.
There will be 100 marks in total with 50 marks of internal evaluation and 50 marks of external
evaluation.
Internal:
Comprehensive Viva Voce is Conducted twice in a semester and evaluated for 25 marks each.
The end examination will be carried out by a committee consisting of an external examiner, head
of the department, a senior faculty member and the supervisor.
51
MECH IIYr(2017-18)
Programme Outcomes
12
1 2 3 4 5 6 7 8 9 10 11
H H M M L
H: High M: Medium L: Low
Syllabus for B. Tech. II Year II semester
Mechanical Engineering
TECHNICAL SEMINAR
Code: 6B494
L T P/D C
--- --- 2 1
Course objective
Develop an ability to understand and present the latest technological developments in
computer science. Identify one of them, understand its impact on the
event/method/society as a whole and present the seminar on the same which enhances
oratory and interview facing skills.
Course Outcome :
1 Deliver lecture on emerging technologies.
2 Explain domain knowledge to resolve real time technical issues
3 Demonstrate ability to lead and explain concepts and innovative ideas.
4 Demonstrate team leading qualities.
5 Demonstrate public speaking and lifelong learning skills for higher studies and to pursue
professional practice.
6 Exchange new information that would not have been available otherwise.
7. Develop debating and interview skills.
Procedure:
1. Seminar in-charges shall highlight the significance of Technical Seminar in the first two
sessions and enlighten the students on the utility of these seminars.
2. The slots, titles shall be decided upfront and seminar In-charge shall take signatures from
students.
6. The same sheet shall be affixed in the respective classrooms and seminar register.
7. If any student fails to present his/her seminar on the given slot, to genuine reasons, they
may be asked to present in the subsequent slot / week.
8. Progress of the seminars needs to be reviewed by the concerned HOD once in 15 days.
9. The evaluation for Technical Seminars has to be informed to students and displayed in
the classrooms.
10. Report and presentation must contain topic, introduction, explanation, diagrams, tables,
applications and conclusions.
Distribution of Marks
53