Sie sind auf Seite 1von 6

Design Your Own Li-Fi Dongle And

Speaker
Light Fidelity (Li-Fi) is a new paradigm in wireless communication. In this article, we describe the
design of a Li-Fi dongle (transmitter) and speaker (receiver) for audio and music applications. The
proposed system is a replacement for wired speakers that plays audio signals received through light.
The dongle can be designed for less than ₹ 350.

This Li-Fi system scores over Bluetooth speakers as follows:

1. The LED light in a room is used not just to light up the room but also to play music, thus giving
benefits of both the worlds. Also, LED bulbs use 85 per cent less energy than incandescent bulbs and
last up to 20 times longer, whereas majority of Bluetooth modules are battery powered and generally
last a year or two only before they need replacement. Hence the proposed system is energy-efficient
over Bluetooth version.

2. You can receive Li-Fi data as long as you are in the range of the light being emitted by the LED light
source. Hence, the range depends on the strength of the light being emitted.

3. Connectivity needs to be established between the Bluetooth transmitter and the receiver, whereas
with Li-Fi any user can receive data and play music on his speaker by simply keeping the receiver in
the range of LED light source.

4. The proposed system can be used with any audio system by just connecting the Li-Fi dongle to its
audio output jack, with no pairing and connectivity requests. This overcomes the problem of
connecting a Bluetooth speaker to audio systems that do not have USB port and Bluetooth support,
which is otherwise a tougher task.
Fig. 1: The proposed Li-Fi based audio system

5. The proposed Li-Fi dongle and speaker costs lower than a Bluetooth dongle and speaker.
The proposed LiFi circuit concept is illustrated in Fig. 1. It uses a Li-Fi dongle to transmit audio signals
from a source such as mobile phone, and a Li-Fi speaker with solar cells at the receiver end to receive
audio signals without wires.

The proposed Li-Fi dongle is connected to the audio jack output available on mobile phones. It has an
LED through which audio/music signals are transmitted as light signals. These light signals are
captured by the Li-Fi speaker through the solar cell array. The authors’ prototype is shown in Fig. 2.

Fig. 2: Author’s prototype of Li-Fi transmitter and receiver for audio applications
Circuit and working

Fig. 3 shows the circuit of the Li-Fi dongle. It uses three common-emitter (CE) amplifiers connected in
parallel to amplify the input audio signal. The Li-Fi speaker is designed by connecting the output of a
3V, 200mA solar cell array to a speaker’s audio input. For this, connect the terminals of the solar panel
to a 3.5mm female audio socket. Then, connect the 3.5mm audio jack from the speaker to the female
socket.

Fig. 3: Circuit of the Li-Fi dongle

During testing, Boom KBS M2 speaker was used. It is available on Flipkart at the following link.

However, you need not buy the exact speaker or Li-Fi speaker. Any speaker with inbuilt amplifier will
do the job. You can modify the same to work as a Li-Fi speaker by interfacing a solar panel to it. After
adjusting the band equaliser in the audio source and the distance between the solar panel and the light
source, you can get almost noise-free sound from the speaker.

The maximum distance/range between the transmitter and receiver depends on the number of amplifier
stages. For a three-stage CE amplifier, the maximum distance is about two metres with LED
illuminance of 13,842.00 lux at the receiver side. For a five-stage CE amplifier, the distance can be up
to 2.6 metres with LED illuminance of 17,382.00 lux. It was observed that as you increase the number
of CE amplifier stages connected in parallel in the transmitter circuit, the intensity of LED light also
increases, which, in turn, increases the maximum distance up to which the sound is audible from the
Li-Fi speaker.

This circuit finds following applications:

1. Stream music from a mobile phone, MP3 player, laptop, tablet or other mobile audio system
wirelessly to Li-Fi speakers. A camera flashlight can be used for the purpose.

2. Transmit audio signals from a microphone on the dais to speakers in an auditorium using pre-
installed LED lights.

3. Use reading lights in buses, trains, cars and airplanes to play melodious music wirelessly on Li-Fi
speakers.

The system can be used in offices, hotels, auditoria, etc, where bright lighting is required throughout
the day.
Construction and testing

An actual-size PCB layout for the Li-Fi dongle is shown in Fig. 4 and its components layout in Fig. 5.
After assembling the circuit on the PCB, enclose it in a suitable box and mount LED1 on front panel of
the box. Connect the dongle to an audio source like mobile phone.
When you play the song, the white LED (LED1) will start blinking. Focus the LED light towards the
solar panel. You should be able to hear the song from the speaker. Adjust the distance between the light
source and the solar panel until you hear clear sound from the speaker.

Fig. 4: PCB
layout of the Li-Fi dongle

Fig. 5: Components
layout for the PCB
Courtesy: https://electronicsforu.com/electronics-projects/design-li-fi-dongle-speaker

Das könnte Ihnen auch gefallen