Sie sind auf Seite 1von 2

P U B L I S H I N G Test No.

Safety and Health 719 AD


This test is designed to be taken without the use of any other materials or
information. You will not need and should not use any notes, charts, tables, a
calculator, or any other materials or devices.

THIS TEST HAS 60 QUESTIONS. FOLLOW THE INSTRUCTIONS


AFTER QUESTION 50. USE TWO ANSWER SHEETS

Instructions
• Print your name and the Test No. in the spaces provided at
the top of the Answer Sheet (left side). Also print the same
information in the spaces at the top of the Report (right side).

• Turn to the questions following this page. Read each question


carefully and make sure you understand what it says.

• Read all the answers. Then choose the best answer, even if you do
not think it is the perfect answer.

• Indicate your choice on the Answer Sheet by marking an X in the


box containing the proper letter. Make sure the X is large and
dark.

• Make sure you mark each answer on the right line. Getting out of
sequence will make almost all your answers wrong.

• If you decide to change an answer, erase your first answer completely.

• If you do not know the answer to a question, do not guess. Leave the
question unanswered.

When you are finished answering all the questions, return this test with your
Answer Sheet to the instructor or examiner.
Test 719 AD
Safety and Health
1. An unexpected event that results in injury, 6. If you find yourself in a workplace situation
illness, or property damage is called a(n) that you think probably will cause you harm
or even death, your first step should be to
a accident
b hazard a ask your employer to eliminate the
c incentive b call OSHA to report the problem
d violation c inform your union steward of the problem
d walk off the job to avoid the problem

2. Failure to wear required protective equipment


7. If you think of a new way to make your job safer,
is an example of a(n)
you should
a defective procedure
a assume that it will not work
b unsafe act
b discuss it with your supervisor
c unsafe condition
c forget the idea and do your job the old way
d workplace hazard
d try it out and see if it works

3. The four main types of hazards to which you 8. OSHA’s Hazard Communication standard requires
might be exposed in the plant are: electrical, chemical manufacturers and distributors to
chemical, mechanical, and
a identify all hazardous chemicals
a environmental b locate disposal sites for hazardous
b flammable chemicals
c static c stop producing hazardous chemicals
d toxic d train all workers who will handle hazardous
chemicals

4. A chemical splash is an example of what type 9. To find out what kind of PPE you must use
of accident? when handling a chemical, check the
section of the MSDS.
a Caught between
b Contacted by a control measures
c Exposure b health hazard data
d Struck by c physical properties
d safety precautions

5. If you discover a chemical spill, you should


clean it up only 10. The main goal of the EPA is to

a after studying the MSDS a conduct safety studies


b if it is in your department b enforce OSHA standards
c if you have been specially trained c evaluate hazardous substances
d if you have help d protect the environment

Test 719 AD
Safety and Health

Das könnte Ihnen auch gefallen