Beruflich Dokumente
Kultur Dokumente
Using a hardware controller with Stylus RMX gives you maximum control
over your groove production. You can edit, re-mix, and manipulate RMX
grooves instantly in real time. It’s powerful, fun, and musically rewarding!
There are two main steps to perform in order to get started; loading the data
for the microKONTROL, and selecting the template in Stylus RMX.
As an added feature, you’ll find our microKontrol Scene data for Atmosphere
and Trilogy with this file set.
STEP 1 – SET UP THE microKONTROL
Make sure you have installed the hardware and software for the
microKONTROL according to KORG’s documentation.
Should I use the Scene Set file or the individual Scene file?
Alternatively, you can customize your own Scene Set using the
microKONTROL Editor Librarian. This allows you to mix and match RMX
scenes with those you already have. We’ve provided the individual Scene
data for this purpose. Consult KORG documentation for details on how to use
the Editor Librarian to create custom Scene Sets.
4. Click “Open”.
The Editor/Librarian now shows the following:
Make sure you have Stylus RMX version 1.5 or above installed.
From the Stylus RMX Utility menu (the button denoted with a Floppy icon),
select MIDI Learn / Load Template.
Scene Pad 1, which contains the RMXremix Scene, is designed to work with
all eight Stylus RMX parts simultaneously.
Be sure that your host application is sending MIDI to RMX; then load grooves
into all eight parts.
Press the Joy-SW switch on the microKONTROL – and RMX will “ALL Play”.
Press it again to stop playback.
The table at the end of this document shows how the microKONTROL
hardware controls are mapped to Stylus RMX. Have fun exploring the
amazing features of Stylus RMX from your hardware controller!
When launching Logic Pro 7.1 with a microKONTROL connected to the computer,
Logic will assume that the microKONTROL is a native Control Surface. You can
defeat this behavior by deleting the microKONTROL icon in Logic’s Control Surface
Setup page (in Preferences), or you can follow the steps below to permanently
disable this behavior.
~/Library/Preferences/Logic/com.apple.logic.pro.cs
CREATE AND SHARE YOUR OWN TEMPLATES
The template we have provided is only the beginning of what you can do with
your hardware controller and Stylus RMX. We’ve provided a blank table for
you to document your own Controller Template creations. You will find it in
the User Template Tools folder, which is located inside the MIDI Learn
directory on your hard drive.
We encourage you to create your own templates, and then share them at the
Yahoo Spectrasonics User Group:
http://launch.groups.yahoo.com/group/spectrasonics/
Best regards,
HARDWARE CONTROLLER:
Korg microKontrol.ctl_rmx
TEMPLATE OVERVIEW:
• Sliders 1-8 -> Mixer Level (Part 1-8)
• Rotary Encoders 1-8 -> Master Filter Tone (Part 1-8)
• Joystick +X-> Aux Send 1
• Joystick –X -> Aux Send 2
• Joystick +Y -> Chaos On/Off, Chaos Pattern Amount
• Joystick –Y -> Reverse
• Joystick SW -> All Play/Stop
• Pads 1-8 -> Solos (toggle)
• Pads 9-16 -> Part Play
- continues -
microKONTROL Multi Part Template: Page 2
Remix Scene