Beruflich Dokumente
Kultur Dokumente
Boomer L2 D
Direct controlled hydraulic tunnelling and mining rig with
COP 1238 rock drills. Designed for power and productivity.
Boomer L2 D
2355
3050
Features
New modular design for easy service and maintenance.
Improved visibility during drilling and tramming.
Direct controlled drilling system which incorporates excellent anti-jamming function RPCF
(Rotation Pressure Controlled Feed force). Separate pumps for percussion, dampening/
positioning and rotation for independent control and maximum output.
COP 1238 rock drill with modern reflex dampening giving genuine high speed drilling and
good drill steel economy. Lubrication system with separate lubrication of driver and gear
gives reliable operation, low maintenance cost and long intervals between overhauls.
BMH 6300 heavy-duty aluminium hydraulic feeds with double bottom for high torsional
resistance. Snap-on stainless steel sleeves and polymer contact pads for long life and low
maintenance cost.
BUT 35 heavy-duty booms for direct, fast and accurate positioning between holes. Improved
linkage bearings in main boom joints and new axial bearings in all boom joints
Sturdy, articulated carrier with four wheel drive for easy manoeuvering in narrow tunnels and
drifts. Powered by a turbocharged, water-cooled 4-cylinder, low emission diesel engine for
high mobility. Four jacks for stable set up.
Instruction and parts manuals are available on CD-ROM.
Main components
Rock drill 2 x COP 1238ME
Feed 2 x BMH 6300-series
Boom 2 x BUT 35F
Drilling system DCS1200
Rock drill COP 1238-05 Carrier
Shank adapter R32, R38 or T38 FOPS approved protective roof
Height over drill centre 86 mm Fixed seat for tramming
Impact power 15kW 2 x 1000 W working lights, halogen
Impact rate 40-60 Hz 8 x 70 W tramming lights
Hydraulic pressure, max. 250 bar Spirit levels one for longitudinal and one for sideway
Rotation system separate rotation Horn
Rotation speed 0-300 rpm Deutz BF4M 1013C diesel engine, water- cooled
Rotation torque, max. 500 Nm turbocharged 115 kW (156 hp) at 2300 rpm,
Lub. air consump. (at 3 bar) 5 l/s 572 Nm at 1400 rpm
Water consumption 0.8 l/s Articulated steering with +/- 38 degree steering angle
Weight 151 kg Four wheel drive
Sound level <106 dB(A) Hydrostatic power steering system
Hydrodynamic Clark 24000 transmission
Feeds BMH 6300 Hurth 176 front axle
BMH 6314 BMH 6316 BMH 6318 BMH 6320
Hurth 176 rear axle with +/- 8 degree oscillation
Total length (mm) 5882 6502 7102 7712
Automatic differential lock on front axle, limited slip
Drill steel length (mm) 4310 4920 5530 6100
Tyres front and rear 14.00 x 24 Michelin XKA
Hole depth (mm) 4043 4668 5268 5878
Clearence outside axles 15 degree
Weight,incl.rock
Hydraulic jacks 2 (extendable) at front and 2 at rear
drill (kg) 605 635 665 690
Service brakes: Two separate circuits, hydraulically
applied, fully enclosed wet disc brakes
Feed force, max. (kN) 20.0 20.0 20.0 20.0
Emergency and parking brakes: SAHR (Spring Applied
Hydraulic Released) fully enclosed wet disc brakes
Boom BUT 35F Fuel tank, volume 100 l
Feed extension 1800 mm Electric system 24 V
Boom extension 1600 mm Batteries 2 x 125 Ah
Parallel holding Complete Central lubrication system
Feed roll-over 360 degrees Fire extinguisher acc. to EN 791
Max. lifting angle +65 degrees Gradeability 1:4 at max. load on drive wheels
30 degrees Tramming speed on flat ground >15 km/hr (at rolling
Max. swinging angle ±45 degrees resistance 0,05); on incline 1:8 > 5 km/hr
Weight, boom only 2920 kg
Optional equipment
Service platform HL 210-MBE Water hose reel Ø1100 mm, for hose diam 1½", length
Protective roof for service platform, FOPS approved 60 m at 70% filling rate
Extended boom reach 700 mm fixed segment (not for Dual controls for hose reel
booms with BMHT) Water hose
Telescopic feed BMHT 6300-series for left/right Hole blowing kit, with 80 l air receiver (CE, AUS or CSA
handed booms, for max 16 ft. rods approved)
Extension drilling set BSH 110 Water mist flushing with external water and air supply
Electronic angle indicator H/V, on high resolution (incl. extra hydraulic driven fan for oil cooling)
colour display Water flow guard
High torque rotation motor on rock drill Big hole drilling kit
Safety belt Heater for hydraulic oil tank, 1 kW
Platform mounting height: 0; +140 (standard); +200 or Electric oil filling pump
+450 mm Boom lubrication system, rear part of boom
Illuminated stairs for platform, 2 x 70 W Rock drill lubrication failsafe kit
Spot lights, 2 x 70 W Rig washing kit, with water hose and reel
Shelf for drill bits and tools Manual lubrication system, grease-gun with hose and
Exhaust water scrubber 95 l reel (incl. 18 kg grease barrel)
Exhaust catalyser with silencer Hydraulic Swellex pump
High altitude setting of diesel engine Ansul 101, fire extinguisher
Dual controls for cable reel Foam filled tyres
Limit switch for cable reel Spare wheel
1000 V electric system, direct start only Large plates for hydraulic jacks, 4 x
Soft start for electrical motors, for 400 - 700 V (not for Spare rock drill
CSA approved rigs) Raincap for main electric motors
CSA approved electrics (Canadian regulations) Ni-Cr plated piston rods (limited selection)
Extra transformer, 15 kVA (not in combination with Beacon warning lamp
water hose reel and not CSA) Back-up alarm
Electric cable type RDOT or Buflex, see recommen-
dations
Plug for cable
Power supply (incl. male plug)
Electric outlet for accessories, 32 Amp (Voltage =
main supply voltage if no extra transformer is chosen.
Not for 1000 V system.)
Boomer L2 D
Coverage area
(with 2° look-out angle)
with 700 mm
boom extention
8550
8950
7900
8300
1900
1975
200
1330
2530
3035
11150
11850
12200
12800
Scale 1:100
9851 2091 01
R38-Hex 35-R32 45 R32 SPEEDROD® 51
R38-Hex 32-R32 41 T38 SPEEDROD® 64
R38-Hex 32-R28 41
T38-Hex 35-R32 48
T38-Hex 35-R32 SPEEDROD® 48
1999.03
Thread Dia, Length, Part No. Thread Dia, Length, Part No.
mm mm mm mm
R38 38 485 7804 3590 03 R38 55 170 7994 3655 00
modifications without prior notice.
*Intended for roof driiling and extension drilling with BSH 110.
For other dimensions and more information please see Atlas Copco Rock Tools catalogue, printed matter No. 9851 1622 01 or
Selection Guide for Tunnelling and Drifting, printed matter No. 9851 1637 01.