Sie sind auf Seite 1von 3

3/17/2010

AVENSIS 2010 CARNAGE

Event Heads | Abhay, Conhas, Shagun, Souvik


Carnage ’10

Event Details

A ROBOT RACING CHALLENGE. DARE TO DRIVE


THROUGH?!?!?!
Maneuver your machine through testing arenas.
Achieve the goal in minimum time and emerge as
the winner..!!!

C - CHALLENGING
A - AGGRESSIVE
R - RACE
N - NON-STOP
A - ACTION
G - GRUELING
E - ENTERTAINING

CHALLENGING, AGGRESSIVE RACE with NON-STOP, GRUELING and ENTERTAINING action!!!

Specifications

Maximum 4 participants per team are allowed.


Minimum robot size is 12 X 12 X 12 cubic cm.
Maximum robot size is 25 X 25 X 25 cubic cm.
The Robot can be wired or wireless.
Team can use maximum of 24V DC Battery (on board/off board).
AC Supply of 230 V 50 HZ will be provided. However, teams must have their own rectifiers and
eliminators.
In case you are not using AC Supply then you have to keep a backup of extra batteries for your bot.
You are required to give an attractive name to your bot. This name should be clearly visible on the
bot.
Keep visiting the website for regular updates.

Rules & Regulations

Every team can have maximum of 1 restart per track.


No readymade robot kits or gear assembly or any part of a toy car (or, lego parts) is allowed and
may lead to disqualification.
Dragging the wired robot once it is placed on the track may lead to disqualification.
No Unfair means are allowed.
Organizers reserve the right to modify the rules at any point of time. Participants are required to
check the website for updates.
The decision of the jury would be final.
Teams might have to submit their Remote Controllers to the organizers to avoid any chances of
interference between similar frequency remotes.
The team members are not allowed to touch the robot once it is placed on the track or it will lead
to disqualification.
Teams can skip any number of hurdles. For skipping each hurdle, time penalty will be levied
accordingly.

Tracks:
There would be three tracks:-
1) First track (Speed Circuit) of 6m length approx.
2) Second track (Hurdle Track) would be 7 - 8 m long approx.
3) Third track (Pave Your Own Way) will have potholes which are to be filled with balls
placed on track. For this, the teams will be allowed to add attachments to their bots. The
dimension of the bots will be measured after removing the attachment (used only for 3rd
track).
Track layouts will be put up on the website soon.
Bonus time will be awarded to the fastest teams on Speed Circuit.
There would be checkpoints to change the power point or where you can halt and replace your
batteries.
Final rankings will be decided based on the total time taken by the team to cover both the tracks.

Breakdown/Timeouts:
There is no provision for breakdown or time-outs. The decision of the organizers will be final and
binding in all respects. But a change of batteries is allowed in between consecutive tracks. The
machines may be repaired during off-time (i.e. the time when the robot is not expected to be on
the race track.)

Size/Safety:
The robot will be first checked for size and safety. The robots are not allowed to dismember
themselves or leave parts or any remnants on the track. The robot must not contain any
combustible, corrosive, or otherwise dangerous materials for safety reasons.

Foul/Penalties:
If your bot touches the boundary of the track, it would be counted as a foul.
Machine shouldn’t harm the track. Harming the arena may lead to disqualification.

ATTRACTIVE PRIZES IN STORE..!!!

For further queries, contact:-

Abhay Sharma - 9899617198


Conhas Thakkar - 9811673382
Shagun Singhal - 9868590820
Souvik Bhattacharya – 9711510981

Das könnte Ihnen auch gefallen