Beruflich Dokumente
Kultur Dokumente
Optimised for maximum mechanical performance - not weight. Sufficient mass of fibre will be included to achieve these performance values.
All GEOfabrics' HPS products are tested, in an independently-audited, ISO 17025, UKAS-acredited laboratory, for all mechanical-performance properties at a minimum of one set every 6000m 2
Test HPS2 HPS2.5 HPS3 HPS4 HPS5 HPS6 HPS7 HPS8 HPS9 HPS11 HPS12 HPS14 HPS17 HPS19 HPS22 HPS25 HPS30 HPS35 HPS40
Fibre type A blend of high-tenacity, staple fibres with diameters selected for optimum performance.
md 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80
Tensile elongation % BS EN ISO 10319
cmd 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80
Thickness @ 2kPa (mm) BS EN ISO 9863-1 3.5 3.5 3.9 4.4 4.9 5.2 5.5 5.8 6 6.7 7 7.8 8.8 9.5 10.5 14 15 16.5 17
Apparent pore size 90% finer (mm) EN ISO 12956 150 150 130 100 80 80 80 70 70 <69 <69 <69 <69 <69 <69 <69 <69 <69 <69
2
Waterflow (l/s/m ) 100 100 85 75 65 55 50 45 40 35 30 25 15 10 9 8 8 5 5
BS EN ISO 11058
Coefficient of permeability (m/s) x10
-3
7.0 7.0 6.6 6.6 6.4 5.7 5.5 5.2 4.8 4.7 4.2 3.9 2.6 1.9 1.9 2.2 2.4 1.7 1.7
Needle detection The full width of each product is electronically inspected during the production process
Standard roll length (m) 200 200 175 150 150 150 125 125 100 75 75 75 50 50 50 50 50 50 50
Approximate roll weight (kg) * 298 372 378 396 460 532 513 610 570 496 537 627 525 584 690 850 973 1120 1298
# Roll widths of 5.9m are supplied for container shipments. * Roll weight for handling guidance only.
Values are Typical , with the exception of Thickness, which is Nominal . Typical indicates the mean value derived from the samples taken for any one test as defined in the BS EN ISO standard - usually the mean of five samples. Nominal is a guide value.