Beruflich Dokumente
Kultur Dokumente
DATASHEET TLT-2
PRODUCTS
FEATURES
The Soil Instruments Electrolevel Tilt Sensor is used to monitor horizontal rotation in structures. The team at Soil
Instruments were the pioneers of Electrolevel technology in the late 1980’s and have more experience with
this type of sensor than anyone else world-wide.
The Tilt Sensor is based on a proven Fredericks 0711 series electrolevel sensor, the sensor mounting
incorporates an adjustment for zero and protects the sensor against thermal gradients.
Two versions of the sensor are available, one which requires external excitation and one which
requires a 12VDC input and produces a 2.5VDC output.
This is especially useful during operations such as compensation FOR DETAILS ON:
grouting, construction using the Observational Technique or where Electrolevel Beam Sesnsor, see data sheet TLT1.
human access is impossible such as active railway. Cable Free Tiltsensor, see data sheet TLTCF.
Cable Free Track Sensor, see data sheet TMCF.
This information is intended as a general guide. For full installation instructions please refer to the relevant user manual. Our staff are available to provide technical support
or to carry out complete installations as required.
SPECIFICATIONS
SENSOR TYPE Electrolevel MEMS Accelerometer
Zero Adjustment Range ±5° Fine Adjustment ±25° Course Full Range Of Sensor
CABLE FITMENT
DIMENSIONS
WEIGHT
Soil Instruments Limited has an ongoing policy of design review and reserves the right to amend these specifications without notice.
ORDERING INFORMATION
PART NO. DESCRIPTION
ELECTROLEVEL TILTSENSOR (GLASS VIAL TYPE) ±45 ARC MINUTES RANGE
TLT2-1.5-1 Uniaxial Tiltsensor. Complete in IP66 sealed enclosure and mounting plate
ELECTROLEVEL TILTSENSOR (CERAMIC TYPE) ±1.5 ARC DEGREES RANGE
TLT2-3.0-1 Uniaxial Tiltsensor. Complete in IP66 sealed enclosure and mounting plate
ELECTROLEVEL TILTSENSOR ACCESSORIES
TLT2-1.5-3 “L” Bracket to read the rotation perpendicular to the structure for Uniaxial Tiltsensor
SOLID STATE TILTSENSOR
C12-1.6 Vertical uniaxial ±52.3mm/metre (±3 arc degrees)
C12-1.1 Vertical uniaxial ±87.2mm/metre (±5 arc degrees)
C12-1.2 Vertical uniaxial ±173.6mm/metre (±10 arc degrees)
C12-1.7 Vertical uniaxial ±258.8mm/metre (±15 arc degrees)
C12-1.8 Vertical uniaxial ±52.3mm/metre (±3 arc degrees)
C12-1.3 Vertical biaxial ±87.2mm/metre (±5 arc degrees)
C12-1.4 Vertical biaxial ±173.6mm/metre (±10 arc degrees)
C12-1.9 Vertical uniaxial ±258.8mm/metre (±15 arc degrees)
SOLID STATE TILTSENSOR ACCESSORIES
TLT2-1.5-5 Bracket for solid state tiltsensor required to mount one solid state tiltsensors to a structure
CONNECTING CABLE AND FITTINGS
CA-3.1-4-IC 4 core, instrument cable, 7/0.20, screened
CA-3.1-6-IC 6 core, Instrument cable, 7/0.20, screened
CA-3.2-4-FR Low smoke cable, 4 core, 16/0.20, screened
CA-4.2 Coloured adhesive tapes
W6-6.1 Nylon ties 150mm x 3.5mm
ST1-3.5 Nylon ties 370mm x 4.7mm
HANDHELD ELECTROLEVEL LEVELLING TOOL - HELM
TLT1-3.1 HELM - Handheld Electrolevel Readout (Zeroing Tool)
TILTSENSOR ELECTROLEVEL
Fixing
Sealed Enclosure
Adjustment Wheel
Tiltsensor
Terminal Block
Cable Gland
Mounting Plate
CONTACT DETAILS:
Soil Instruments Limited, Bell Lane, Uckfield, East Sussex, TN22 1QL, United Kingdom