Beruflich Dokumente
Kultur Dokumente
Motor Motor
Wheel Wheel
Wheel IC Engine
Motor
Wheel
Kinetic energy recovery system
The device recovers the
kinetic energy that is
present in the waste heat
created by the car’s braking
process.
The concept of transferring
the vehicle’s kinetic energy
using Flywheel energy
storage was postulated by
physicist Richard Feynman
in the 1950s
How does K. E.R. S work
When the driver brakes most of the kinetic energy is still converted to
car.
When the driver presses his boost button that stored energy is
This has been exhibited in the Motor sport industry –The system used by F! cars
is called K. E. R. S (Kinetic Energy Recovery System)
Breaking is not total loss
Conventional brakes apply friction to convert a vehicle’s kinetic energy
into heat. In energy terms, therefore, braking is a total loss: once heat is
generated, it is very difficult to reuse. The regenerative braking system,
however, slows a vehicle down in a different way.
Wear Reduction
An electric drive train also allows for regenerative breaking which
increases Efficiency and reduces wear on the vehicle brakes.
Limitations of regenerative braking
system
The regenerative braking effect drops off at lower speeds, therefore the
friction brake is still required in order to bring the vehicle to a complete
halt.
The friction brake is a necessary back-up in the event of failure of the
regenerative brake.
Most road vehicles with regenerative braking only have power on some
wheels (as in a 2WD car) and regenerative braking power only applies to
such wheels, so in order to provide controlled braking under difficult
conditions (such as in wet roads) friction based braking is necessary on
the other wheels
Conclusion
The energy efficiency of a conventional brake is only about
20 percent, with the remaining 80 percent of its energy
being converted to heat through friction. The miraculous
thing about regenerative braking is that it may be able to
capture as much as half of that wasted energy and put it
back to work.
This reduces fuel consumption by 10 to 25 percent.
Hence regenerative braking plays an important role in fuel
consumption and also in the field of speed
Thank you