Beruflich Dokumente
Kultur Dokumente
Fill in the blanks, write all answers, calculation on this paper 25th Jan 2017
2. Rmf of Mud Filtrate is 0.4 ohmm. Rw of Formation Water is 0.04 ohmm. What is the
value of Electrochemical SP?
3. For an Air Filled Hole, the best Resistivity Tool to use would be the _______________
4. A Dual Laterolog tool manages to achieve both Deep and Shallow Depth of
Investigations by
a.
b.
c.
8. When using Water based mud, invasion will cause the Sxo to __________________ in an
hydro carbon bearing sand zone with porosity and permeability
9. Two sand zones A and B are within 25m of each other in a 3000m deep vertical well. A
has porosity of 15% and B has porosity of 10%. In which zone will diameter of invasion
(di) be more?
11. In a 100% water bearing sand, Porosity is 25%, Rt = 10 ohm. What is the value of Rw?
Assume simple Archie equation
12. On a Mud Log, drilling ROP correlates very well with GR and SP log. Why?
13. Normally on a SP log, the curve goes towards left indicating a reservoir rock and towards
right indicating Shale. What condition can cause the SP curve to deflect towards right in a
reservoir rock?
14. Why does the SP curve become a funnel or bell shape, when the grain size changes from
Top to bottom of a reservoir rock bed?
16. In Doll’s Geometric factor theory for Induction, what are σa and Gbh?
17. If Skin effect correction is not done for Induction Logs, then Resistivity read by Tool
will be ________________________________________ than the true Resistivity Rt
18. Array Induction Log gives D1 and D2 (besides all other outputs). What are they?