Beruflich Dokumente
Kultur Dokumente
is similar to the
1
Before we start there is basic information you
need to remember.
The image below is the main screen of ISIS and is
divided into 4 parts: General Toolbar, Design
Platform, Component Toolbar and Simulation
Icons.
2
General Toolbar contains all the basic
commands like print and save.
Design Platform
This is were you will put all your components
and draw your tracks.
Component Toolbar
Here you will select all your components,
sources(VCC,Ground,AC,DC) and measuring
components(oscilloscope,voltmeter etc.)
Simulation Icons
Icons to start, step, pause and stop your
simulation.
3
Designing a circuit
Selecting a component.
• Click on the “Component Mode”
icon in the “Component Toolbar”.
4
• As you type the components name you will see there will be results
in the main screen.
Component Symbol
• When the results shows the desired component, double click on the
result to add it to the list, after the component is placed in the list
you may search for more components. When finished click on “OK”.
5
Placing a Component
• After you have selected your components
and added it to the “DEVICES LIST”, you can
place the component on the “Design
Platform”.
6
Connecting Components
• After you placed your components, you can connect your tracks.
7
Editing Components
• Right click on the component and select “Edit Properties”
• If you want to use prefixes just add the letter to your value.
Example:
100 μF Capacitor =>100uF.
10 nF Capacitor =>10nF.
1200Ω Resistor =>1k2.
1 000 000Ω Resistor => 1M. 8
9
10
11
12
• Youtube, shortcuts
13
14