Beruflich Dokumente
Kultur Dokumente
4-460-668-11(1)
High
Be sure to register your TV. HDMI 1
Online HDMI 2/MHL
HDMI/MHL cable carries
United States http://productregistration.sony.com both video and audio HD HD HD HD SD SD *1
Registration: HDMI 3 HDMI/MHL signals.
Audio/Video Performance
COMPONENT
Component
HD HD HD SD SD
Audio L/R
connection
Composite
© 2013 Sony Corporation VIDEO video SD
connection Audio L/R
Printed in Mexico
Standard
*1 For
supported PC formats refer to the operating instruction manual.
1 Select the language for the OSD (on screen display). Disc; or connecting to your PC or other equipment, you need to choose the correct input
using your remote control:
■ Press the INPUT button repeatedly until your selection is highlighted on-screen.
2 Choose your viewing country.
3 Select the type of use. Adjust Screen Shape and Aspect Ratio
High Definition and Standard Definition signals are transmitted with different aspect
4 Connect either cable or antenna to your TV. You can ratios (the width-to-height ratio of the image).
connect both using an A-B RF switch (not supplied).
The 16:9 aspect ratio (common to most HD signals) looks perfect on your BRAVIA.
If you are not using the CABLE/ANTENNA connection to TV (for
example, if using a cable or satellite box), you can cancel the Auto
Program by selecting Cancel.
If you did not follow the Initial Setup screen the first time
you turned on your TV, refer to your Operating
■ Press the WIDE button on your remote control to display the Wide Mode setting of
your preference.
Instructions Manual. To change the signal source setting
(cable to antenna or vice versa), press HOME and select
Customize Sound and Picture Quality
Settings, Channel, Signal Type to select signal source type, and then perform Auto
You can choose optimum sound and picture settings to match the content you are
Program.
displaying on your TV:
■ Press the remote control’s HOME button, select Settings, then select the Picture and
To Do List Sound settings to adjust the picture and sound quality of your content.
When the Initial Setup is completed, consider carrying out these items:
Set Closed Captions (CC) Set Parental Lock Show/Hide Channels Refer to your Operating Instructions Manual for more information on adjusting or
Manage Inputs (AV Setup) Set Speakers customizing your settings.
For details, refer to your BRAVIA Operating Instructions Manual.
Basic Connection with HD Cable Box Basic Connection with SD Cable Box
Rear of TV Rear of TV
SAT (dish)
Blu-ray Disc/DVD
HD Cable Box Cable/SAT (dish)
or HD Satellite Receiver
yellow HD Antenna
plug to
VIDEO IN
SD Cable Box or
SD Satellite Receiver
Splitter
Composite
Digital Optical Audio
HD BRAVIA® Sync™ Basic Connection Built-in Wireless LAN Connection and Setup
Rear of TV Side Panel
TV
Internet
HD Cable Box or *1 Wi-Fi Protected Setup ™ (WPS) is a mark of the Wi-Fi Alliance.
HD Satellite Receiver *2 Wi-Fi Protected Access ™ (WPA) is a mark of the Wi-Fi Alliance.
*3 Before scanning, be sure to make the wireless router (access point) settings
Cable/Antenna
(SSID/Key).
*1 Signifies a BRAVIA Sync capable device.
*2 The optical connection is only needed for A/V receivers that do not support ARC
(Audio Return Channel).