Beruflich Dokumente
Kultur Dokumente
Hardware Description
Compiled by Thunder-link.com
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between
Huawei and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specified in the contract, all statements, information, and recommendations in this document
are provided "AS IS" without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a
warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
M40
Contents
3.2.23.2 M40
3.2.23.2.1 Version Description
3.2.23.2.2 Update Description
3.2.23.2.3 Application
3.2.23.2.4 Functions and Features
3.2.23.2.5 Working Principle and Signal Flow
3.2.23.2.6 Front Panel
3.2.23.2.7 Valid Slots
3.2.23.2.8 Characteristic Code for the M40
3.2.23.2.9 Optical Interfaces
3.2.23.2.10 Parameters Can Be Set or Queried by NMS
3.2.23.2.11 M40 Specifications
3.2.23.2 M40
M40: 40-channel multiplexing board
Version Description
The available functional versions of the M40 board are TN11 and TN12.
Update Description
This section describes the hardware updates in V100R006C01 and later
versions as well as the reasons for the updates. Any product versions
that are not listed in the document means that they have no hardware
updates.
Application
As a type of optical multiplexing unit, the M40 board multiplexes a
maximum of 40 channels of signals into one channel of signals that
comply with ITU-T Recommendations.
Front Panel
There are indicators and interfaces on the front panel of the M40
board.
Valid Slots
Three slots house one TN11M40 board and two slots house one TN12M40
board.
Optical Interfaces
This topic describes the interface information on the U2000.
TN11M4 Y Y Y Y Y Y Y N
0
TN12M4 Y Y Y Y Y Y Y N
0
Type
The TN11M40 board uses a front panel different from that of the
TN12M40 board. The TN11M40 board occupies three slots. The TN12M40
board occupies two slots. For details, see Front Panel.
Substitution Relationship
TN11M40 TN12M40 The TN12M40 board can be created as M40 on the NMS.
The former can substitute for the latter without
any software upgrade. After the substitution, the
TN12M40 board functions as the TN11M40 board.
TN12M40 None -
Parent topic: M40
Added the TN12M40 board. Compared with the TN11M40 board that occupies
three slots, the TN12M40 board occupies two
slots.
3.2.23.2.3 Application
As a type of optical multiplexing unit, the M40 board multiplexes a
maximum of 40 channels of signals into one channel of signals that
comply with ITU-T Recommendations.
For the position of the M40 board in the WDM system, see Figure 1.
Figure 1 Position of the M40 board in the WDM system
Alarms and Detects the optical power and reports the alarms and
performance performance events for the board.
events monitoring
Optical-layer Supported
ASON
Signal Flow
Each of the M01-M40 optical interfaces receives one channel of
single-wavelength optical signals, and sends the signals to the
multiplexer. The multiplexer multiplexes the 40 channels of single-
wavelength optical signals into one channel of multiplexed optical
signals, and then outputs them through the OUT optical interface.
Module Function
Optical module
The splitter splits some optical signals from the main optical
path and provides them to the MON interface for detection.
NOTE:
A table indicating the mapping relationship between interfaces and frequencies is
located on the front panel.
Indicators
Four indicators are present on the front panel:
Interfaces
Table 1 lists the type and function of each interface.
The rear connector of the board is mounted to the backplane along the
left slot in the subrack. Therefore, the slot number of the TN11M40
board displayed on the NM is the number of the leftmost one of the
three slots.
For example, if slots IU1, IU2, and IU3 house the TN11M40 board, the
slot number of the TN11M40 board displayed on the NM is IU1.
The rear connector of the board is mounted to the backplane along the
left slot in the subrack. Therefore, the slot number of the TN12M40
board displayed on the NM is the number of the leftmost one of the
three slots.
For example, if slots IU1 and IU2 house the TN12M40 board, the slot
number of the TN12M40 board displayed on the NM is IU1.
For example, the characteristic code for the TN11M40 board is CE,
indicating C band and even wavelengths.
OUT 1
M01-M40 2-41
MON 42
Parent topic: M40
Configure Working All, Odd, Even Specifies the desired parity of the
Band Parity Default: All working band of the board.
Optical Specifications
Table 1 lists the optical specifications of the M40 board.
Mechanical Specifications
Dimensions of front panel:
TN11M40 (H x W x D): 264.6 mm (10.4 in.) x 76.2 mm (3.0 in.) x
220 mm (8.7 in.)
Power Consumption
a: The maximum power consumption is the power consumed by the board when it
works normally under the highest ambient temperature.