Beruflich Dokumente
Kultur Dokumente
-
1.2 Clearing grass and removal of the rubbish 70469 Sqm 3.90 274,829.10
upto a distance of 50 m outside the
periphery of the area cleared.
-
1.3 Earth work in surface excavation not -
exceeding 30 cm in depth but exceeding
1.5 m in width as well as 10 sqm on plan
including disposal of excavated earth upto
1.0 KM and lift upto 1.5 m, disposed soil to
be levelled and neatly dressed :
-
a) All Kinds of soil 105926 Cum 134.59 14,256,580.34
-
1.5 Filling available excavated earth 69724 Cum 134.38 9,369,511.12
(excluding rock) in trenches, plinth, sides
of foundations etc. in layers not exceeding
20 cm in depth, consolidating each
deposited layer by ramming and watering,
lead up to 50 m & lift upto 1.5 m.
a) Pipes, cables etc., exceeding 80mm dia 4368 metre 758.89 3,314,831.52
but not exceeding 300mm dia
-
1.10 Supply and stacking of Fly ash conforming 218637 Cum 138.70 30,324,951.90
to IRC- 58 at site, including carriage,
loading, unloading & stacking up to any
lead (measured stacks will be reduced by
20% for payment).
1.11 Filling with available fly ash and earth 276987 Cum 134.38 37,221,513.06
(free from stones) in trenches or
embankment in layers (each layer should
not exceed 15 cm), with intermediate layer
of compacted earth under OMC (Soil
density of 98%) after every four layers of
compacted depth of fly ash (density of
95%), sides & top layer of filling shall be
done with earth having total minimum
compacted thickness 30 cm or as decided
by Engineer-in-charge, including
compacting each layer by rolling by
suitable rollers / ramming and watering,
all complete as per drawing and direction
of Engineer-in-charge.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
1.12 Supplying of earth (free from stones) by -
mechanical transport including loading,
unloading at site including royalty and
carriage up to a lead of 5 km.(The qty.
payable shall be calculated by levels of
compacted earth in item no. 1.08 minus
1.07 and shall be compared with the qty.
brought from borrow area assessed
through levels. Nothing extra shall be
payable for carriage of earth beyond a lead
of 5 Km, even if it is brought from a lead of
more than 5 Kms.)
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
2.4 Providing and laying cement concrete in -
retaining walls, return walls,walls (any
thickness) including attached pilasters,
columns, piers,abutments, pillars, posts,
struts, buttresses, string or lacing
courses,parapets, coping, bed blocks,
anchor blocks, plain window sills,
fillets,sunken floor,etc., up to floor five
level, excluding the cost of
centering,shuttering and finishing :
2.4.1 1:2:4 (1 Cement : 2 coarse sand : 4 graded 237 Cum 6996.87 1,658,258.19
stone aggregate 20 mm nominal size)
2.4.2 a) 1:5:10 (1 cement : 5 coarse sand (zone- 736 Cum 5629.12 4,143,032.32
III) : 10 graded stone aggregate 40 mm
nominal size)
-
3.0 SUB-HEAD : III : REINFORCEMENT -
CEMENT CONCRETE :-
3.0 Providing and laying in position machine -
batched and machine mixed design mix
M-25 grade cement concrete for reinforced
cement concrete work,using cement
content as per approved design
mix,including pumping of ceonctrete to
site of laying but excluding the cost of
centring,shuttering,finishing and
reinforcement,includingadmixtures in
recommednded proportions as per IS: 9103
to accelerate , retard setting of
concrete,improve workability without
impairing strenth andduability as per
direction of Engineer-in-Charge.
3.3 Add for plaster drip course/ groove in 6411 metre 36.49 233,937.39
plastered surface or moulding to R.C.C.
projections.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
3.4 Extra for providing richer mixes at all floor -
levels.
Note: Excess /less cement over the -
specified cement content used is
payable/recoverable seperately )
3.4.1 a) Providing M-30 grade concrete instead 20516 cum 74.27 1,523,723.32
of M-25 grade BMC/RMC. ( Note ;
Cement content cosidered in M-30 is @
340 Kg/cum )
3.4.2 a) Providing M-40 grade concrete instead 31365 cum 222.75 6,986,553.75
of M-25 grade BMC/RMC. ( Note ;
Cement content cosidered in M-30 is @
360 Kg/cum )
-
3.5 Add or deduct for using extra cement in 20910 quinal 718.90 15,032,199.00
the items of design mix over and above the
specified cement content therein
-
3.6 Extra for R.C.C./ B.M.C/ R.M.C. work 3149 Cum 248.24 781,707.76
above floor V level for each four floors or
part thereof.
-
3.7 Centring and shuttering including -
strutting,propping etc. and removal of
form for:
-
3.7.1 a) Foundation, footing, bases of columns, 13556 sqm 207.25 2,809,481.00
Plinth Beam (all work upto plinth level)
etc. for mass concrete.
-
3.7.2 b) Walls ( Any thickness ) including 38535 sqm 404.57 15,590,104.95
attached pilasters, butteresses, plinth and
string courses etc.
-
3.7.3 c) Suspended 107519 sqm 451.27 48,520,099.13
floors,roofs,landings,balconies and access
platform.
-
3.7.4 d) Lintels, beams,girders, bressuners and 93351 sqm 366.42 34,205,673.42
cantilevers.
-
3.7.5 e) Columns,Pillars,Piers,Abutments,Posts 72307 sqm 499.94 36,149,161.58
and struts.
-
3.7.6 f) Stairs,( Excluding landings except spiral- 4614 sqm 448.12 2,067,625.68
staircases )
-
3.7.7 i) Extra for shuttering in circular work.. 2430 sqm 599.93 1,457,829.90
(20% of respective centering and
shuttering items )
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
3.7.8 g) Edges of slab and breaks in floors and -
walls
i) Under 20cm wide. 20496 metre 130.58 2,676,367.68
-
3.7.9 h) Weather shade,chajjas,corbels etc., 1848 sqm 557.54 1,030,333.92
including edges.
-
3.8. Extra for additional height in centering, -
shuttering wherever required with
adequate bracing, propping etc. including
cost of de-shuttering & de-centring at all
levels over a height of 3.5 m, for every
additional height of 1 m, or part thereof
(Plan area to be measured).
-
4.4 Half brick masonry with non modular fly -
ash bricks of class designation 10,
conforming to IS: 12894,in super structure
above plinth and upto floor V level.
-
a) Cement mortar 1:4 ( 1 cement: 4 coarse 12506 sqm 822.29 10,283,558.74
sand )
-
4.5 Providing and laying Autoclaved Aerated -
Cement blocks masonry with 100/150/200
mm thick in super structure above plinth
level up to floor V level in polymer mortar
3 to 4mm thcik as per approved
manufacturer specifications and as
directed by Engineer in charge.
-
4.6 Extra for half brick masonry in 227 Sqm 19.45 4,415.15
superstructure,above floor V level for
every four floors or part thereof by
mechanical means.
-
4.7 Extra for brick work / AAC block 2272 Cum 219.54 498,794.88
masonry / Tile brick masonry in
superstructure above floor V level, for
each four floors or part thereof by
mechanical means.
-
4.8 Brick work with common burnt clay -
selected F.P.S. (non modular) bricks of
class designation 7.5 in exposed brick
work including making horizontal and
vertical grooves 10 mm wide 12 mm deep
complete in cement mortar 1:6 (1 cement :
6 coarse sand)
From ground level upto plinth level 388 cum 5186.66 2,012,424.08
Above plinth level upto floor V level 1974 cum 6120.57 12,082,005.18
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
4.9 Brick work with non modular fly ash -
bricks conforming to IS: 12894,class
designation 10 average compressive
strength in super structure above plinth
level upto floor V level in :
a) Cement mortar 1:6 ( 1 cement: 6 coarse 7474 cum 6590.27 49,255,677.98
sand )
-
4.10 Providing and fixing up to floor five level -
precast cement concrete hollow block,
including hoisting and setting in position
with cement mortar 1:3 (1 cement : 3
coarse sand), cost of required centering,
shuttering complete.
-
5.5 Providing and fixing granite stone slab 212 sqm 3026.22 641,558.64
( Pearl grey / Sadharali granite stone ) as
approved with table rubbed, edges
rounded and polished, of size 75x50 cm
deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of
appropriate width with chase cutter and
embedding the stone in the chase with
epoxy grout or with cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone
aggregate 6 mm nominal size) as per
direction of Engineer-in-charge and
finished smooth.
-
5.6 Providing and laying flamed finish -
Granite stone flooring in required
designand patterns, in linear as well as
curvilinear portions of the building all
complete as per the architectural drawings
with 18 mm thick stone slab over 20 mm
(average) thick base of cement mortar 1:4
(1 cement : 4 coarse sand) laid and jointed
with cement slurry and
pointing with white cement slurry
admixed with pigment of
matching shade including rubbing, curing
and polishing
etc. all complete as specified and as
directed by the
Engineer-in-Charge.
Flamed Granite stone slab pearl grey / 5851 Sqm 3085.96 18,055,951.96
sadharali granite stone
-
5.7 Granite stone flooring with 18mm thick -
Granite of approved shade (sample of
Granite shall be approved by Engineer-In-
Charge) over 20mm (average) thick base of
cement mortar 1:4 (1 cement : 4 coarse
sand ) laid and jointed with grey cement
slurry including rubbing and mirror
polishing complete with :-
-
5.9 Providing & fixing R.C.C. collars NP2 class 674 Each -
300MM dia and upto 500mm in width in
wall at any level any floor etc. complete as
directed by Engineer-in-Charge.
-
6.0 SUB-HEAD: VI: WOOD WORK:- -
-
6.1 Providing wood work in frames of doors, -
windows, clerestory windows and other
frames, wrought framed and fixed in
position with hold fast lugs or with dash
fasteners of required dia & length ( hold
fast lugs or dash fastener shall be paid for
separately).
-
a) Second class teak wood 135 cum 99105.22 13,379,204.70
-
6.2 Providing and fixing ISI marked flush -
door shutters conforming to IS : 2202 (Part
I) non-decorative type, core of block board
construction with frame of 1st class hard
wood and well matched commercial 3 ply
veneering with vertical grains or cross
bands and face veneers on both faces of
shutters:
-
a) 35 mm thick including ISI marked 4354 sqm 1666.75 7,257,029.50
Stainless Steel butt hinges with necessary
screws
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.3 Providing and fixing Fiber Glass 5752 metre 444.00 2,553,888.00
Reinforced plastic (FRP) Door Frames of
cross-section 90 mm x 45 mm having
single rebate of 32 mm x 15 mm to receive
shutter of 30 mm thickness. The laminate
shall be moulded with fire resistant
grade unsaturated polyester resin and
chopped mat. Door frame laminate shall
be 2 mm thick and shall be filled with
suitable wooden block in all the three legs.
The frame shall be covered with fiber glass
from all sides. M.S. stay shall be provided
at the bottom to steady the frame.
-
6.5 Extra for providing lipping with 2nd class 4354 sqm 390.95 1,702,196.30
teak wood battens 25mm minimum depth
on all edges of flush door shutters ( over
all area of door shutter to be measured )
-
6.6 Providing & Fixing decorative high -
pressure laminated sheet of plain / wood
grain in gloss / matt / suede finish with
high density protective surface layer and
reverse side of adhesive bonding quality
conforming to IS : 2046 Type S, including
cost of adhesive of approved quality.
-
6.14 Providing and fixing Stainless steel (grade -
304) in brushed finish hanging floor door
stopper as approved with necessary
screws of Dorma/ Yale/ Godrej or
equivalent etc. complete:
a) Twin rubber stopper 2939 each -
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.14 Providing and fixing fire resistant door 1015 metre 1334.90 1,354,923.50
frame of section 143 x 57 mm having built
in rebate made out of 16 SWG
G.I. sheet (zinc coating not less than
120 gm/Sqm) duly filled with
vermuculite based concrete mix, suitable
for mounting 60 minutes fire rated door
shutters. The frame is fitted with
intumuscent fire seal strip of size 10x4
mm (minimum) alround the frame and
fixing with dash fastener of approved
size and make, including applying a
coat of approved brand fire resistant
primer etc. complete as per direction of
Engineer-in-charge (Dash fastener to be
paid for separately).
6.16.1 With clear fire resistant glass panes 20 sqm 29279.05 585,581.00
6mm thick of approved brand,
having minimum 60 minutes fire
resistance
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.17 Providing and fixing panic bar / latch 176 each 6564.73 1,155,392.48
(Double point) fitted with a single body,
Trim Latch & Lock on back side of the
Panic Latch of reputed brand and
manufacture to be approved by the
Engineer- in- charge, all complete.
6.18.1 Fixed window / ventilator made of (small 2350 sqm 5770.12 13,559,782.00
series) frame 47 x 50 mm & mullion 47 x 68
mm both having wall thickness of 1.9 ±
0.2 mm and single glazing bead of
appropriate
dimension. (Area upto 0.75 Sqm.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.19 Providing and fixing factory made -
uPVC white colour sliding glazed
window upto 1.50 m in height
dimension comprising of uPVC multi-
chambered frame with in-built roller
track and sash extruded profiles duly
reinforced with
1.60 ± 0.2 mm thick galvanized mild
steel section made from roll forming
process of required length (shape & size
according to uPVC profile),
appropriate dimension of uPVC
extruded glazing beads and uPVC
extruded interlocks, EPDM gasket,
wool pile, zinc alloy (white powder
coated) touch locks with hook, zinc alloy
body with single nylon rollers (weight
bearing capacity to be 40 kg),
G.I fasteners 100 x 8 mm size for fixing
frame to finished wall and necessary
stainless steel screws etc. Profile of
frame & sash shall be mitred cut and
fusion welded at all corners, including
drilling of holes for fixing hardware's and
drainage of water etc. After fixing frame
the gap between frame and adjacent
finished wall shall be filled with
weather proof silicon sealent over
backer rod of required size and of
approved quality, all complete as per
approved drawing & direction of
Engineer-in-Charge. (Single / double
glass panes, wire mesh and silicon sealant
6.19.1 Three track three panels sliding window 5400 sqm 7759.32 41,900,328.00
with fly proof S.S wire mesh (Two nos.
glazed & one no. wire mesh panels) made
of (big series) frame 116 x 45 mm & sash 46
x 62 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double
glazing bead of appropriate dimension.
(Area of window above 1.75 Sqm)
6.20 Providing and fixing casement handle 6964 each 160.24 1,115,911.36
made of zinc alloyed (white powder
coated) for uPVC casement window with
necessary screws etc. complete.
6.21 Providing and fixing zinc alloyed (white 3482 each 132.93 462,862.26
powder coated) touch lock for uPVC
sliding window with necessary screws
etc. complete.
6.22 Providing and fixing Magic Eye at main 182 each 845.95 153,962.90
ent. door. (Make :-
DORMA/Haffle/D-Line or equivalent)
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.23 Providing and fixing aluminium extruded 1042 each 415.04 432,471.68
section body tubular typevuniversal
hydraulic door closer (having brand logo
with IS : 3564,embossed on the body, door
weight upto 36 kg to 80 kg and door width
from 701 mm to 1000 mm), with double
speed adjustment with necessary
accessories and screws etc. complete.
6.25 Providing & fixing lock with EPC both 426 each 1342.55 571,926.30
side key for
Toughened glass door including all fittings
complete.
6.26 Providing & fixing handles Stainless steel, 505 each 4183.70 2,112,768.50
450x25 mm (like TGDIH 45025) Finish pair
satin for Toughened glass door.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.27 Providing and fixing fully Automatic -
Sliding door operator Dorma ES 200 Easy
or equiavalent model of Dline/ Kaba with
manets (Suitable for Glass fixing)
compliant with European standards
and produced according to the
guidelines for power-operated windows,
doors and gates BGR 232, the UVV and
the VDE regulations. TÜV design tested,
tested according to the low voltage
guidelines, production according to ISO
9001:2000 certification. Fulfils the DIN
V18650 (prEN 12650). Automatic Sliding
Door Operator should have mounting
backplate for easy installation and a
flexible track profile for improved noise &
vibration dampening and easy
maintenance. Microprocessor-controlled
control unit. Self-learning, with
adjustable parameters for opening and
closing speed, hold open time and
opening and closing force. Class of
protection IP 20. Operators of very sturdy
design with Self balancing Panel
suspension system and with Anti-Jump
fitting with clear passage width (Two
shutters of equal width). Door Panel
weight max 2x100 kg. With the
following accessories Function programs:
Program Modes: Off, Automatic,
permanent open, Exit only, Partial open.
Adjustable Hold Open Time: Hold
Adjustable Opening Speed: 10 -50 9 each -
Cm/S, Adjustable Closing Speed: 10 –
40 Cm/S, Auto Error. Display, with
Error Code Display for error correction.
Read-out error store with error codes.
Emergency off – Connection for
Emergency Off Button, On activation
Operator will Open Fully and Stop all
functions, enabling passenger to pass
through in case of Panic. Safety
devices:Inbuilt Obstruction detection
feature with automatic reversing cycle
on obstruction, dynamic and static force
limitation, emergency control unit
(emergency stop), Safety PhotoCells: 1/
2 Pair of PhotoCells are provided for
safety of passenger standing in line of
motion of Moving Panel and for
through-passage monitoring Connection:
230 V, 50/60 Hz, UPS Supply.
Locking: Electro-mechanical locking,
Bistable.(UPS of 750 VA for power backup
of 20 min. shall be paid separately).
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.28 Providing and fixing fully Automatic -
Sliding door operator Dorma ES 200 Easy
or equivalent of Dline/ Kaba suitable for
Wall Fixing compliant with European
standards and produced according to
the guidelines for power-operated
windows, doors and gates BGR 232, the
UVV and the VDE regulations. TÜV
design tested, tested according to the
low voltage guidelines, production
according to ISO 9001:2000 certification.
Fulfils the DIN V18650 (prEN 12650).
Automatic Sliding Door Operator
should have mounting backplate for
easy installation and a flexible track
profile for improved noise & vibration
dampening and easy maintenance.
Microprocessor-controlled control unit.
Self-learning, with adjustable parameters
for opening and closing speed, hold-
open time and opening and closing
force. Class of protection IP 20. Operators
of very sturdy design with Self balancing
Panel suspension system and with Anti-
Jump fitting clear passage width (Two
shutters of equal width).Door Panel
weight max 2x100 kg. With the
following accessories Function programs:
Program Modes:
- Off, Automatic, permanent open, Exit
only, Partial open. Adjustable Hold
Open Time: Hold Open is easily
adjustable at module as per client’s
requirement, Hold Open Time: 0.5 – 30
Adjustable Closing Speed: 10 – 40 16 each -
Cm/S, Auto Error Display, with Error
Code Display for error correction. Read
out error store with error codes.
Emergency off – Connection for
Emergency Off Button, On activation
Operator will Open Fully and Stop all
functions, enabling passenger to pass
through in case of Panic. Safety
devices:Inbuilt Obstruction detection
feature with automatic reversing cycle
on obstruction, dynamic and static force
limitation, emergency control unit
(emergency stop), Safety PhotoCells: 1/
2 Pair of PhotoCells are provided for
safety of passenger standing in line of
motion of Moving Panel and for
through-passage monitoring Connection:
230 V, 50/60 Hz, UPS Supply.
Locking: Electro-mechanical locking,
Bistable. (UPS of 750 VA for power
backup of 20 min. shall be paid
separately).
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
6.29 Providing and fixing fly proof stainless 2707 sqm -
steel grade 304 wire gauge, to windows
and clerestory windows using wire
gauge with average width of aperture
1.4 mm in both directions with wire of
dia. 0.50 mm all complete.
7.4.1 80x1.25 mm M.S. laths with 1.25 mm thick 130 sqm 2474.98 321,747.40
top cover
7.5 Providing and fixing ball bearing for 52 each 405.32 21,076.64
rolling shutters.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
7.6 Providing and fixing M.S. fan clamp type I 2888 each 119.84 346,097.92
or II of 16 mm dia M.S. bar, bent to
shape with hooked ends in R.C.C. slabs
or beams during laying, including
painting the exposed portion of loop,
all as per standard design
complete.
-
7.7 Steel work welded in built up -
sections/framed work ,including
cutting,hopisting,fixing in position at all
heights and applying a priming coat of
approved steel primer using structural
steel etc. as required.
-
a) In gratings, frames, guard bar, ladders, 92784 Kg 91.85 8,522,210.40
railings,louvers, brackets, gates, seats &
similar works.
-
7.8 Steel work in built up tubular ( round, -
square or rectangular hollow tubes of
grade YST 310 etc.) trusses, sky light,
facade frame work, portal frame work,
column, runner, purlin , paragola or
similar location etc., including cutting,
hoisting, fixing in position at all heights
and applying a priming coat of approved
steel primer, including welding and bolted
with special shaped washers etc. complete
as per direction of Engineer in charge.
(Holding down bolts and chemical anchor
shall be paid separately)
-
a) Electric resistance or induction butt 110061 Kg 119.90 13,196,313.90
welded tubes
7.9 Providing and fixing stainless steel ( Grade 37035 Kg 504.81 18,695,638.35
304) railing made of Hollow tubes,
channels, plates etc., including welding,
grinding, buffing, polishing and making
curvature wherever required) and fitting
the same with necessary stainless steel
nuts and bolts complete, i/c fixing the
railing with necessary accessories &
stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top
of the floor or the side of waist slab with
suitable arrangement as per approval of
Engineer-in-charge,( for payment purpose
only weight of stainless steel members
shall be considered excluding fixing
accessories such as nuts, bolts, fasteners
etc.).
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
8.0 SUB-HEAD: VIII: FLOORING:- -
-
8.1 52 mm thick cement concrete 584 sqm 593.34 346,510.56
flooring with concrete hardener
topping, under layer 40 mm thick
cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size) and top layer 12 mm thick
cement hardener consisting of mix 1:2 (1
cement hardener mix : 2 graded stone
aggregate 6 mm nominal size) by
volume, hardening compound mixed @ 2
litre per 50 kg of cement or as per
manufacturer's specifications. This
includes cost of cement slurry, but
excluding the cost of nosing of steps etc.
complete.
-
8.2 Cement plaster skirting up to 30 cm -
height, with cement mortar 1:3 (1 cement :
3 coarse sand), finished with a floating
coat of neat cement.
18 mm thick 47 sqm 374.06 17,580.82
-
8.3 Cement concrete pavement with 1:2:4 129 Cum 6202.53 800,126.37
(1 cement : 2
coarse sand : 4 graded stone aggregate
20 mm nominal size), including finishing
complete.
-
8.4 Chequerred precast cement concrete tiles -
22 mm thick in footpath & courtyard,
jointed with neat cement slurry mixed
with pigment to match the shade of tiles,
including rubbing and cleaning etc.
complete, on 20 mm thick bed of cement
mortar 1:4 (1 cement: 4 coarse sand)..
-
8.7 Providing and fixing wood based 1351 sqm -
Panels of approved colour & shade
with linear perforations of make
Armstrong, Dexune or Anutone of NRC
not less than 0.70. The panel thickness
shall be 15mm thick with 2mm
grooves at a pitch recommended by the
manufacurer. The panels shall be fire rated
grade with Melamine lamination. Edges of
panels shall be tongued & grooved for
seamless mounting. The back of
panels shall be fixed with accoustical
fleece for sound absorption. The panels
shall be fixed with GI clips on vertical
carrier profile of GI channels of weight
not less than 300 gm/mtr fixed to
wooden frame / wall with screws @
600 mm centre to centre and the cavity
between wall and panels to be filled with
50 mm thick rock wool of density 24
kg /Cum, all complete as per direction of
Engineer-in-charge (Wooden frames shall
be paid for separately)
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
8.8 Providing and fixing 'Acoustical Wall 882 sqm -
Panels’ of make Armstrong (Optra),
Anutone (Subtex NRC), Dexune
(CERES) with square edges made of fibre
glass substrate 25mm thick and wrapped
on front and all sides except rear face with
an acoustically transparent and fire-
resistant fabric of approved colours and
shades in sizes 600x600 mm to
600x1200mm or other sizes required
as per drawings, providing a minimum
sound absorption level of
0.90 Noise reduction coefficient.
Acoustical wall panels shall be fixed with
GI impellers of size 75mm x100 mm @ 8
nos/Sqm fixed to wooden frame / wall
all Complete as per drawing &
direction of Engineer-in-charge.
(Wooden frames shall be paid for
separately)
-
8.12 Providing and laying Tufted level Loop 970 sqm -
Pile tiles antistatic carpet tileof
Milliken( Way Forcefield Dark colour
Lava) or equivalent shade and pattren of
Mohawk or Interface or approved
equivalent & size 500 x 500 mm / 600 x
600 mm with protective stain treatment(s),
soil protection to repel and resist Stain and
Anti Microbial treatment, Appearance
Retention Rating (CRI 101) for severe use
with PVC free backing having min. face
eight of 10 gsm conforming to ASTME –
648 Flooring Radiant Panel Class I grade
including fixing with Volatile Organic
Compound (VOC) Free Adhesive etc.
complete as per drawing and directions of
Engineer-In-Charge.
-
8.13 Providing and fixing Ist quality ceramic 19220 sqm 795.89 15,297,005.80
glazed wall tiles conforming to IS:15622
(thickness to be specified by the
manufacturer), of approved make, in all
colours, shades except burgundy, bottle
green, black of any size as approved by
Engineer-in-Charge, in skirting, risers of
steps and dados, over 12 mm thick bed of
cement mortar 1:3 (1 cement : 3 coarse
sand) and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing in
white cement mixed with pigment of
matching shade complete.
-
8.14 Providing and laying Ceramic glazed floor 10823 sqm 878.87 9,512,010.01
tiles of size 300x300 mm (thickness to be
specified by the manufacturer) of 1st
quality conforming to IS : 15622 of
approved make in colours such as White,
Ivory, Grey, Fume Red Brown, laid on 20
mm thick cement mortar 1:4 (1 Cement : 4
Coarse sand), including pointing the joints
with white cement and matching pigment
etc, complete.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
8.15 Providing and laying vitrified floor tiles in -
different sizes (thickness to be specified by
the manufacturer) with water absorption
less than 0.08% and conforming to IS :
15622, of approved make, in all colours
and shades, laid on 20mm thick cement
mortar 1:4 (1 cement : 4 coarse sand),
including grouting the joints with white
cement and matching pigments etc.,
complete.
-
a) Size of Tile 1000x1000 mm 55631 sqm 2199.02 122,333,681.62
-
8.16 Providing and laying Vitrified tiles in -
different sizes (thickness to be specified by
manufacturer), with water absorption less
than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade,
in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3
coarse sand), including grouting the joint
with white cement & matching pigments
etc. complete.
-
a) Size of Tile 1000x1000 mm 4524 sqm 2218.09 10,034,639.16
-
8.17 Grouting the joints of flooring tiles having 46690 sqm 103.87 4,849,690.30
joints of 3mm width ,using epoxy grout
mix of 0.70 kg of organic coated filler of
desired shade ( 0.10 kg of hardner and 0.20
kg of resin per kg including filling/
grouting and finishing complete as per
direction of engineer in charge. (size of
tile1000x1000mm)
-
9.0 SUB-HEAD: IX: ROOFING :- -
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
9.1 Providing and fixing precoated galvanised 972 sqm 393.08 382,073.76
iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-
charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per
sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of
the sheet and polyester top coat 15-18
microns. Sheet should have protective
guard film of 25 microns minimum to
avoid scratches during transportation and
should be supplied in single length upto
12 metre or as desired by Engineerin-
charge. The sheet shall be fixed using self
drilling / self tapping screws of size (5.5x
55 mm) with EPDM seal, complete upto
any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to
size and shape wherever required.
-
9.2 Providing gola 75x75 mm in cement -
concrete 1:2:4 (1 cement : 2 coarse sand : 4
stone aggregate 10 mm and down gauge),
including finishing with cement mortar 1:3
(1 cement : 3 fine sand) as per standard
design :
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
9.4 Providing and fixing tiled false ceiling of -
specified materials of size 595x595 mm in
true horizontal level, suspended on inter
locking metal grid of hot dipped
galvanized steel sections ( galvanized
@120 grams/ Sqm, both side
inclusive) consisting of main "T"
runner with suitably spaced joints to get
required length and of size 24x38 mm
made from 0.30 mm thick (minimum)
sheet, spaced at 1200 mm center to center
and cross "T" of size 24x25 mm made of
0.30 mm thick (minimum) sheet, 1200
mm long spaced between main "T" at
600 mm center to center to form a grid
of 1200x600 mm and secondary cross
"T" of length 600 mm and size 24x25 mm
made of 0.30 mm thick (minimum) sheet
to be interlocked at middle of the
1200x600 mm panel to form grids of
600x600 mm and wall angle of size
24x24x0.3 mm and laying false ceiling tiles
of approved texture in the grid
including, required cutting/making,
opening for services like diffusers,
grills, light fittings, fixtures, smoke
detectors etc. Main "T" runners to be
suspended from ceiling using GI slotted
cleats of size 27 x 37 x 25 x1.6 mm
fixed to ceiling with
12.5 mm dia and 50 mm long dash
fasteners, 4 mm GI adjustable rods with
GI Metal Ceiling Lay in plain Tegular 9545 sqm 1243.74 11,871,498.30
edge Global white color tiles of size
595x595 mm, and 0.5 mm thick with 8
mm drop; made of G I sheet having
galvanizing of 100 gms/Sqm (both
sides inclusive) and electro statically
polyester powder coated of
thickness 60 microns (minimum),
including factory painted after bending.
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
9.5 Providing and Fixing 15 mm thick -
densified tegular edged eco friendly light
weight calcium silicate false ceiling tiles of
approved texture of size 595 x 595 mm in
true horizontal level, suspended on inter
locking metal grid of hot dipped
galvanised steel sections (galvanising @
120 grams per sqm including both side)
consisting of main ‘T’ runner suitably
spaced at joints to get required length and
of size 24x38 mm made from 0.33 mm
thick (minimum) sheet, spaced 1200 mm
centre to centre, and cross “T” of size
24x28 mm made out of 0.33 mm
(Minimum) sheet, 1200 mm long spaced
between main’T’ at 600 mm centre to
centre to form a grid of 1200x600 mm and
secondary cross ‘T’ of length 600 mm and
size 24 x28 mm made of 0.33 mm thick
(Minimum) sheet to be inter locked at
middle of the 1200x 600 mm panel to from
grid of size 600x600 mm, resting on
periphery walls /partitions on a Perimeter
wall angle pre-coated steel of
size(24x24X3000 mm made of 0.40 mm
thick (minimum) sheet with the help of
rawl plugs at 450 mm centre to centre with
25 mm long dry wall screws @ 230 mm
interval and laying 15 mm thick densified
edges calicum silicate ceiling tiles of
approved texture in the grid, including,
cutting/ making opening for services like
diffusers, grills, light fittings, fixtures,
using G.I. slotted cleats of size 25x35x1.6 -
mm fixed to ceiling with 12.5 mm dia and
50 mm long dash fasteners, 4 mm G.I.
adjustable rods with galvanised steel level
clips of size 85 x 30 x 0.8 mm, spaced at
1200 mm centre to centre along main ‘T’,
bottom exposed with 24 mm of all
Tsections shall be pre-painted with
polyster baked paint, for all heights, as per
specifications, drawings and as directed by
engineer-in-charge.
Note :- Only calcium silicate false ceiling 29452 sqm 1600.66 47,142,638.32
area will be measured from wall to wall.
No deduction shall be made for exposed
frames/opening (cut outs) having area less
than 0.30 sqm.The calcium silicate ceiling
tile shall have NRC value of 0.50
(Minimum), light reflection > 85%,
noncombustible as per B.S. 476 part IV,
100% humidity resistance and also having
thermal conductivity <0.043 w/m 0 KC.
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
9.6 Providing and fixing thermal insulation 22904 sqm 273.29 6,259,434.16
with Resin Bonded Fibre glass wool
conforming to IS: 8183 having density 24
kg/m3, 50 mm thick, wrapped in 200G
Virgin Polythene Bags fixed to wall with
screw, rawel plug & washers and held in
position by criss crossing GI wire etc.
complete as per directions of Engineer-in-
Charge
-
9.7 Designing, fabricating, testing, installing -
and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding,
with open grooves for linear as well as
curvilinear portions of the building, for all
heights and all levels etc. including:
-
9.8 Providing and fixing pre stressed type-III 4527 Sqm -
Polyster fabric membrane reinforced with
230 micron PVC with top coat of PVDF
with cross linked molecules of weight 1050
gram/Sqm (Mehatop N of MEHGIES or
TX-30 of Ferrari or VERSEIDAG )having
minimum tensile strength of 5500N/5 cm,
minimum tear strength of 650 N including
the
structural steel built up section frame and
necessary
cables/ strands and other hardware for
supporting tensile
fabric including structural design of
structural sections and
its vetting as per detailed below:-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
i) Providing engineering consultancy for -
design, engineering and patterns of
architectural membrane, steel tube roof
truss cables and related parimeter
attachments and hardware including
associated structural steel member etc.
with all relevant calculation sheets duly
vetted and proof checked by any IIT,
factory fabricating, transportation,
assembling and erection in position of
tensite membrane roof with steel structure,
Spiral Strand Hot Dipped Galvanised
Cable etc. with all lead & lifts.
Note : -
1. The steel structure has to be designed as
per attached architectural / conceptual
drawings of tensile fabric profile including
all arch beams, curved lateral beams and
bracings, vertical support columns, nodal
joints, bases of columns and stainless steel
pin joints as applicable. 2. 5% of the work
done amount shall be retained as
guarantee money to watch the
performance and shall be released after 2
years if the performance is found
satisfactory. Any defect noticed during the
guarantee period will be rectified by the
contractor in 10 days. Otherwise same
shall be executed at the risk and cost of the
contractor. The guarantee money can be
released in lieu of bank guarantee
produced.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
For Super Academic block as per drawings -
attached in the tender document For
payment purpose, the actual plan area
considering entral line dimension of MS
built up peripheral member n which the
tensile fabric is tied, will be measured in
quare meter corected to 2 decimals Neither
surface area nor any curved surface area
shall be measured. No eduction shall be
done for the eyes (blank spaces) from he
plan area due for payment. The
approximate payable rea as per drawing
attached with the tender doCument is
72.81 x 62.17 Sqm.
-
9.9 Providing and fixing false ceiling at all -
height including providing and fixing of
frame work made of special sections,
power pressed from M.S. sheets and
galvanized with zinc coating of 120
gms/sqm (both side inclusive) as per IS :
277 and consisting of angle cleats of size 25
mm wide x 1.6 mm thick with flanges of 27
mm and 37mm, at 1200 mm centre to
centre, one flange fixed to the ceiling with
dash fastener 12.5 mm dia x 50mm long
with 6mm dia bolts, other flange of cleat
fixed to the angle hangers of 25x10x0.50
mm of required length with nuts & bolts of
required size and other end of angle
hanger fixed with intermediate G.I.
channels 45x15x0.9 mm running at the
spacing of 1200 mm centre to centre, to
which the ceiling section 0.5 mm thick
bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5
mm, at 450 mm centre to centre, shall be
fixed in a direction perpendicular to G.I.
intermediate channel with connecting clips
made out of 2.64 mm dia x 230 mm long
G.I. wire at every junction, including
fixing perimeter channels 0.5 mm thick 27
mm high having flanges of 20 mm and 30
mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry
wall screws @ 230 mm interval, including
upto 150 mm on both sides of joint and -
two coats of primer suitable for board, all
as per manufacturer’s specification and
also including the cost of making openings
for light fittings, grills, diffusers, cutouts
made with frame of perimeter channels
suitably fixed, all complete as per
drawings, specification and direction of
the Engineer in Charge but excluding the
cost of painting with
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.5 mm thick tapered edge gypsum 1576 sqm 861.51 1,357,739.76
moisture resistant board
-
9.10 Providing and applying two coats of 26435 Sqm 272.12 7,193,492.20
High Albedo paint having minimum
Solar Reflective Index (SRI) 108 (with
solar reflectance & thermal emittance
tested as per ASTM) C 1549 and ASTM C
1371 respectively), VOC less than 10
cc/gm. The coating thickness and the
methodology of application shall be
strictly as per manufacturer's
specifications and as approved by
Engineer-In-Charge. Surface preparation
includes cleaning with metal wire
brush to remove all dust, fungus etc.,
washing with water all complete. The
contractor shall give guarantee for the
perfomance of SRI and also the
durabitity of coating, all complete as per
direction of Engineer-in-Charge.
-
10.0 SUB-HEAD: X : FINISHING:- -
-
10.01 12mm cement plaster of mix :- -
-
a) 1:6 ( 1 cement : 6 fine sand) 66040 sqm 171.35 11,315,954.00
-
10.2 Providing and applying 12 thick (average) 160664 sqm 232.26 37,315,820.64
premixed formulated one coat gypsum
lightweight plaster having additives and
light weight aggregates as vermiculite/
perlite respectively conforming to IS: 2547
(Part - 1 & II) 1976, applied on hacked /
uneven background such as bare brick/
block/ RCC work on walls & ceiling at all
floors and locations, finished in smooth
line and level etc. complete.
-
10.3 15mm cement plaster on the rough side of -
single or half brick wall of mix
a) a) 1:6 ( 1 cement : 6 fine sand) 72052 sqm 197.90 14,259,090.80
-
10.4 Extra for plastering exterior walls of height 11728 sqm 43.44 509,464.32
more than 10 m from ground level for
every additional height of 3 m or part
thereof.
-
10.5 6mm cement plaster to ceiling of mix :- -
-
a) 1:3 (1 cement : 3 fine sand) 77840 sqm 153.66 11,960,894.40
-
10.6 Extra for providing and mixing water 15624 Per bag 53.80 840,571.20
proofing material in cement plaster of 50 kg
work in proportion recommended by cement
the manufacturers per bag of 50 kg cement used in
used in the mix the mix
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
10.7 Distempering with oil bound -
washable distemper of
approved brand and manufacture to give
an even shade
New work (two or more coats) over and 1000 sqm 100.13 100,130.00
including water
thinnable priming coat with cement
primer
-
10.8 Finishing walls with textured exterior -
paint of required shade:
-
a) New work ( two or more coats allpied @ 73275 sqm 160.98 11,795,809.50
3.28 ltr/10 sqm) over and including
priming coat of exterior primer applied
2.20 kg/10 sqm
-
10.9 Providing and applying white cement 5000 Sqm 93.34 466,700.00
based putty of average thickness 1
mm, of approved brand and
manufacturer, over the plastered wall
surface to prepare
the surface even and smooth complete.
-
10.10 Applying priming coats with primer of -
approved brand and manufacture, having
low VOC (Volatile Organic Compound )
content.
(a) With water thinnable cement primer on 205029 sqm 39.48 8,094,544.92
wall surface having
VOC content less than 50 grams/litre
-
10.11 Wall painting with acrylic emulsion paint , -
having VOC ( Volatile Organic Compound
) content less than 50grams/litre, of
approved brand and manufacture,
including applying additional coats
wherever required, to achieve even shade
and colour.
-
Two or more coats 5273 sqm 80.15 422,630.95
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
10.13 Applying priming coats with primer of -
approved brand and manufacture,having
low VOC (Volatile Organic Compound
) content.
With ready mixed red oxide zinc 5273 Sqm 34.78 183,394.94
chromatic on steel / iron works having
VOC content less than 250 grams/ litre
-
11.0 SUB-HEAD: XI:ROAD WORK :- -
-
11.1 Loosening of sub grade upto of depth avg 72000 sqm -
30cm , removal of rank vegetation , grass
etc, leveling, watering and consolidating
with road roller of capacity 8-10 tonne
including making good the undulations
etc. and re-rolling the sub grade and
disposal of rubbish earth lead upto 50
metres.
-
11.2 Supplying and stacking at site -
-
a) 90 mm to 45 mm size stone aggregate 700 cum 1427.70 999,390.00
c) 53 mm to 22.4 mm size stone aggregate 525 cum 1648.05 865,226.25
d) Stone screening 13.2 mm nominal size 350 cum 1608.88 563,108.00
(Type A)
-
11.3 Laying, spreading and compacting stone 2100 cum 479.91 1,007,811.00
aggregate of specified sizes to WBM
specifications in uniform thickness, hand
picking, rolling with 3 wheeled road /
vibratory roller 8-10 tonne capacity in
stages to proper grade and camber,
applying and brooming requisite type of
screening / binding material to fill up
interstices of coarse aggregate, watering
and compacting to the required density.
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
11.4 Providing and laying design mix un- -
reinforced cement concrete of M-40 grade
dowel jointed, plain cement concrete
pavement over a prepared sub base with
PPC cement @ 360 kg per cum, coarse and
fine aggregate conforming to IS 383,
maximum size of coarse aggregate not
exceeding 25 mm, mixed in a batching and
mixing plant as per approved mix design,
transported to site, laid with a fixed form
paver, spread, compacted and finished in a
continuous operation including provision
of contraction, expansion, construction
and longitudinal joints, joint filler,
separation membrane, sealant primer, joint
sealant, debonding strip, dowel bar, tie
rod, admixtures as approved, curing
compound, finishing to lines and grades
complete as per IRC/MORT&H
specifications clause 602 and direction of
Engineer in charge.( Cement content
considered in M-40 is @ 360kg/cum.
Excess / less cement used as per design
mix payable recoverable separately. )
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
11.6 Providing and laying at or near ground 301 cum 5356.52 1,612,312.52
level factory made kerb stone of M-25
grade cement in position to the
required line, level and curvature
jointed with cement mortar 1:3 (1
cement: 3 coarse sand) including making
joints with or without grooves (thickness
of joints except at sharp curve shall not
to more than 5mm) including making
drainage opening wherever required
complete etc. as per direction of
Engineer-in-charge (length of finished kerb
edging shall be measured for payment).
(Precast C.C. kerb stone shall be approved
by Engineer-in-charge).
-
11.7 Construction of dry lean cement concrete 1980 cum 3560.52 7,049,829.60
sub base over of prepared sub grade with
coarse and fine aggregate conforming to IS
383, the size of coarse aggregate not
exceeding 25mm,aggregate cement ratio
not to exceed 15:1, aggregate gradation
after blending to be as per specifications,
cement content not to be less than 150 kg
per cum, optimum moisture content to be
determined during trial length
constructions , concrete strength not to be
less 10 Mpa at 7 days, mixed in a batching
plant , transported to site , for all lead and
lift, laid with a mechnical paver ,
compacting with 8-10 tonne vibratory
roller, finishing and curing etc complete
as per MORT&H specifications clause 601
and direction of Engineer in charge.
(Extra/less cement shall be paid /
deducted under relevant item in BOQ)
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
11.8 Providing and applying 2.5 mm thick road 300 sqm 418.09 125,427.00
marking strips (retroreflective) of specified
shade/ colour using hot thermoplastic
material by fully/ semi automatic
thermoplastic paint applicator machine
fitted with profile shoe, glass beads
dispenser, propane tank heater and profile
shoe heater, driven by experienced
operator on road surface including cost of
material, labour ,T&P, cleaning the road
surface of all dirt, seals, oil, grease and
foreign material etc. complete as per
direction of Engineer-in-charge and
accordance with applicable specifications.
-
11.9 40 mm thick rubbed stone flooring over 20 -
mm (average) thick base of cement mortar
1:5 (1 cement : 5 coarse sand),with joints 3
mm thick side buttered with cement
mortar 1:2 (1 cement : 2 stone dust)
admixed with pigment to match the shade
of stone and pointing with same mortar.
-
12.4 Providing & fixing white vitreous china 867 each -
Wall hung type European type water
closet with C.P. bolts, nuts, C.I. chair or
other hanging arrangement, including
solid plastic seat and cover with lid, C.P.
brass hinge rubber buffers, with
accessories,i/c fixing with nuts & bolts
drilled & grouted to walls at required
spacing, including cutting and making
good the wall and floors wherever
required. (Make: Jaquar cat no.-FLS-WHT-
5951, Or Equivalant model of Cera,
Hindware or Parryware).
-
12.5 Providing and Fixing Concealed in wall 867 each -
Flushing Cistern with dual flush Actuator
Plate (plastic body in approved finish),
flush-stop function, noise less float valve
and fast filling action with all component
parts of high quality complete including
fixing frame and set for Item no.12.11.
(Make: Jaquar cat no.- JCS-WHT-2400WS,
Or Equivalant model of Hindware ,Cera or
Parryware)
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.6 Providing and fixing water closet -
squatting pan (Indian type W.C. pan ) with
100 mm sand cast Iron P or S trap, 10 litre
low level white P.V.C. flushing cistern,
including flush pipe, with manually
controlled device (handle lever)
conforming to IS : 7231, with all fittings
and fixtures complete, including cutting
and making good the walls and floors
wherever required
-
12.8 Providing and Fixing white vitreous china 681 each -
Oval wash basin size 560x410 mm for
under counter mounting, specially
fabricated brackets painted white, 32mm
C.P.cast brass bottle trap and connection
pipe to wall with C.P. wall flange and
rubber adopter for waste connection
complete, including cutting and making
good the walls wherever required.
(Hindware Cat No:10017, Or Equivalant
model of Jaquar ,Cera or Parryware).
-
12.9 Providing and Fixing vitreous china flat 352 each -
back urinal of size: 610x410x380 mm with
CP Cast Bottle Trap, C.I. hangers, 15mm
dia inlet to built in spreaders with inbuilt
waste with C.P flange, complete
including cutting and making good the
walls and floors wherever required .
(Make: Hindware 60002 Or Equivalant
model of Jaquar cera or parryware)
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.10 Providing and Fixing electrical operated 352 each -
concealed automatic flushing system for
urinals, including front S.S plate 125 x
125mm chrome sensor with CP brass
body, ball valve etc,complete in all respect
including cutting and making good the
walls wherever required electrical
connection complete. (Make: Hindware
Cat No 60007 Or Equivalant model of
,Cera or Parryware)
-
12.11 Providing and fixing V.C division plate 337 each -
Size: 680x380 mm fixed with expandable
anchor fasteners with C.P. brass bolts and
washers embedded in wall with anchor
and set in cement concrete complete,
including cutting and making good the
walls wherever required (Make: Hindware
Cat No: 61001 Or Equivalant model of
Parryware)
-
12.12 Providing and fixing ABS Chrome plated 547 each -
Hand Shower (Health Faucet) with 8 mm
dia, 1 Meter long Flexible tube & wall
hook including cutting and making good
the walls wherever required complete as
per instructions of the engineer-in-charge
(Make: Vijay Cat No: ADS-1372 ,Cera cat
no CG105B Or Equivalant model of
Hindware or Parryware)
-
12.13 Providing and fixing single lever 547 each -
concealed diverter with Built-in NRV with
Divertor handle for bath and shower
complete as per instructions of the
engineer-in-charge .(Make: JAQUAR Cat
No.( FUS-29079K +ALD/079)Or
Equivalent model of Grohe or Kohler)
-
12.14 Providing and Fixing Over head shower 547 each -
100 mm dia with Shower Arm complete as
per instructions of the engineer-in-charge
(Make: JAQUAR OHS-1719 Or Equivalant
& SHA-CHR-477P Or Equivalent model of
Grohe or Kohler).
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.15 Providing and Fixing CP Bath spout with 547 each -
wall flange complete as per instructions of
the engineer-in-charge or as per equivalent
make .(Make: JAQUAR Cat No. SPJ-429 Or
Equivalent model of Grohe or Kohler)
-
12.16 Providing and Fixing CP Bottle Trap with 1450 each -
300 mm long connection pipe and wall
flange 32 mm size complete as per
instructions of the engineer-in-charge
(Make: Jaquar- ALD-769L250x190 Or
Equivalent model of Parryware)
-
12.17 Providing fixing C.P. brass towel rail of 547 each -
size 450 mm long fixed to wooden cleats
with CP brass Screws complete as per
instructions of the engineer-in-charge
(Make: Jaquar Code : AQN-7711A Or
Equivalent model of hindware &
Parryware)
-
12.18 Providing and fixing C.P. brass towel ring 430 each -
Round / Square fixed to PVC cleats with
C.P. brass screws including cutting and
making good the walls wherever required
(Make: Jaquar Code : ACN-1121N Or
Equivalent model of Hindware &
Parryware)
-
12.19 Providing and fixing C.P cast brass Double 895 each -
coat hook fixed to PVC cleats with C.P.
brass screws complete as per instructions
of the engineer-in-charge (Make: Jaquar
Cat. No. ACN 1161N Or Equivalent model
of Hindware & Parryware)
-
12.20 Providing and Fixing CP Soap dish 547 each -
complete as per instructions of the
engineer-in-charge (Make: Jaquar cat. No.
ACN-1131N Or Equivalent model of
Hindware & Parryware)
-
12.21 Providing and fixing Stainless Steel Body 72 each -
Auto hand drier to be operated with 220
volts, single phase, with fully hygienic
condition, with all accessories including
cutting and making good the walls,
wherever required complete as per
instructions of the engineer-in-charge.
(Make: Jaquar HDR SAP M99 ACS Or
Equivalant model of Cera or Parryware)
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
12.22 Providing and fixing manual CP soap 656 each -
dispenser with liquid soap (including one
time soap fill) including cutting and
making good the walls, wherever required
complete as per instructions of the
engineer-in-charge (Make: Jaquar Cat No:
ACN-1135N or Equivalent model of
Hindware or cera)
-
12.23 Providing and Fixing 600 mm long Hand 26 each -
rail (Grab bar) for Handicap Toilets with
Stainless Steel Screws on wooden cleats /
expandable fastners complete as per
instructions of the engineer-in-charge
(Jaquar "Continental Cat No: AHS-1507
Or Equivalent model of Grohe or
Kohler) )
-
12.24 Providing and Fixing SS Grating with 2343 EACH -
frame and SS Screws casted heavy duty
125 mm dia including cutting and making
good the walls and floors wherever
required complete in all respects (Make:
CARDIN- IKD-06 Or Equivalant model of
chilly ,Cera or Parryware).
-
12.25 Providing and fixing cast iron hubless -
soil,waste, Rain water and vent pipe
(conforming to I.S: 15905) including all
fittings with or without access doorof any
degree i.e.bends,junction, offsets, access
pieces, GI holder bats and clamp , stays etc
and jointing with SS coupling with gasket
with supporting clamps for wall in shaft
and pipes at ceiling with brackets and
support including painting if require of
approved quality and cutting and making
good where required complete in all
respects.
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.33 Providing and fixing M.S. holder-bat -
clamps of approved design to cast iron
hubless/SCI/CI pipe embeded in and
including cement concrete blocks 10x10x10
cm of 1:2:4 mix (1cement : 2coarse sand : 4
graded stone aggregate 20 mm nominal
size), Including cost of cutting holes and
making good the walls etc.
-
For 75 mm dia pipe 640 Each 176.37 112,876.80
For 100 mm dia pipe 2160 Each 178.83 386,272.80
-
12.34 Providing and fixing Bend of required -
degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts
complete.
-
100 mm dia, Hubless centrifugally cast 3650 Each 523.03 1,909,059.50
(spun) iron epoxy coated inside & outside
as per IS:15905
12.35 Providing and fixing plain Bend of -
required degree
100 mm dia, Hubless centrifugally cast 2450 Each 328.17 804,016.50
(spun) iron epoxy coated inside & outside
as per IS:15905
-
12.36 Providing and fixing double equal plain -
junction of required degree.
75x75x75x75 mm, Hubless centrifugally 1225 Each 378.18 463,270.50
cast (spun) iron epoxy coated inside &
outside as per IS:15905
100x100x100x100 mm, Hubless 2430 Each 689.35 1,675,120.50
centrifugally cast (spun) iron epoxy coated
inside & outside as per IS:15905
-
12.37 Providing and fixing single equal plain -
junction of required degree.
75x75x75x75 mm, Hubless centrifugally 625 Each 302.47 189,043.75
cast (spun) iron epoxy coated inside &
outside as per IS:15905
100x100x100x100 mm, Hubless 1250 Each 537.93 672,412.50
centrifugally cast (spun) iron epoxy coated
inside & outside as per IS:15905
-
12.38 Providing and fixing double unequal plain -
junction of required degree.
100x100x75x75 mm, Hubless centrifugally 615 Each 551.56 339,209.40
cast (spun) iron epoxy coated inside &
outside as per IS:15905
-
12.39 Providing and fixing single unequal plain -
junction of required degree.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
100x100x75 mm, Hubless centrifugally cast 100 Each 515.55 51,555.00
(spun) iron epoxy coated inside & outside
as per IS:15905
-
12.40 Providing and fixing double equal plain -
invert branch of required degree:
100x100x100x100 mm, Hubless 120 Each 839.49 100,738.80
centrifugally cast (spun) iron epoxy coated
inside & outside as per IS:15905
-
12.41 Providing and fixing single equal plain -
invert branch of required degree :
75x75x75 mm, Hubless centrifugally cast 150 Each 358.30 53,745.00
(spun) iron epoxy coated inside & outside
as per IS:15905
100x100x100 mm, Hubless centrifugally 150 Each 537.93 80,689.50
cast (spun) iron epoxy coated inside &
outside as per IS:15905
-
12.42 Providing and fixing single unequal plain -
invert branch of required degree :
100x100x75 mm, Hubless centrifugally cast 150 Each 587.57 88,135.50
(spun) iron epoxy coated inside & outside
as per IS:15905
-
12.43 Providing and fixing Hubless centrifugally -
cast iron offsets epoxy coated inside &
outside as per IS:15905
65 mm offsets -
With 100 mm dia pipe 164 Each 492.36 80,747.04
With 75 mm dia pipe 100 Each 405.48 40,548.00
-
12.44 Providing and fixing Hubless centrifugally -
cast iron offsets epoxy coated inside &
outside as per IS:15905
130 mm offsets -
With 100 mm dia each 100 Each 596.23 59,623.00
With 75 mm dia each 80 Each 426.59 34,127.20
-
12.45 Providing and fixing terminal guard : -
75 mm, Hubless centrifugally cast (spun) 45 Each 210.62 9,477.90
iron epoxy coated inside & outside as per
IS:15905
100 mm, Hubless centrifugally cast (spun) 65 Each 380.26 24,716.90
iron epoxy coated inside & outside as per
IS:15905
-
12.46 Providing, fixing to the inlet mouth of rain -
water pipe C.I. grating of following size
including all fitting and accessories
including civil work.
200X200mm 220 Each -
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
12.47 Providing, of vertical / horizontal storage -
type hot water heater fixed to wall with
anchor bolts & nuts, 20mm CP brass cock
and 20mm non return valve complete
including making connection with 15 mm
dia CP connecting pipe on Inlet and
Outlet, suitable length of power cable and
15A plough (for kitchen & Toilets). Make-
JAQUAR-ELENA/ Havells/ Racold
-
12.49 Providing and fixing in position 125 x 125 350 Each -
mm square stainless steel cockroach trap
consiting of 0.45 mm thick inner and outer
cup and 1.00 mm thick top grating (jali)
with ring to be fixed inside 'P' traps with
cement concrete.(for kichen ) (make-
chilly-SCCT-SFC-127 or equivalent model
of cardin
-
13.8 Providing and fixing C.P. brass single 859 each 2989.00 2,567,551.00
lever Wash Basin mixer without popup
waste with 450mm long copper pipe
complete including cutting and making
good wherever required (Make: Jaquar
Cat No: FLR-5025B or equivalent model of
GROHE or Kohler .
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
13.9 Painting G.I. pipes and fittings with -
synthetic enamel white paint with two
coats over a ready mixed priming coat,
both of approved quality for new work :
a) 15 mm dia 18826 metre 10.63 200,120.38
b) 20 mm dia 8492 metre 12.61 107,084.12
c) 25 mm dia 4760 metre 16.56 78,825.60
d) 32 mm dia 4135 metre 19.66 81,294.10
e) 40 mm dia 3615 metre 23.24 84,012.60
f) 50 mm dia 1220 metre 27.52 33,574.40
g) 65mm dia 915 metre 33.00 30,195.00
h) 80 mm dia 250 metre 35.00 8,750.00
i) 100 mm dia 80 metre 37.00 2,960.00
-
13.10 Providing and fixing G.I. Union in G.I. -
Pipe including cutting and threading the
pipe and making long screws etc. complete
(new work)
a) 15mm dia nominal bore 3432 each 157.89 541,878.48
b) 20mm dia nominal bore 2407 each 182.68 439,710.76
c) 25 mm dia. nominal bore 1250 each 219.92 274,900.00
d) 32 mm dia. nominal bore 1480 each 257.16 380,596.80
e) 40 mm dia. nominal bore 1720 each 319.24 549,092.80
f) 50 mm dia. nominal bore 600 each 411.30 246,780.00
g) 65mm dia. nominal bore 225 each 659.54 148,396.50
h) 80mm dia. nominal bore 100 each 746.42 74,642.00
-
13.1 Providing and filling fine sand 100 mm all- -
round the G.I. pipes in external work.
-
13.18 Providing and fixing C.I butterfly valve, -
wafer end type class PN 1.6 as per
I.S:13095 or BS:5155, including necessary
nuts, bolts, gaskets, flanges etc., complete
as required and as specified.
13.24 Providing and placing on terrace (at all 26000 per litre 7.75 201,500.00
floor levels) polyethylene water storage
tank, ISI : 12701 marked, with cover and
suitable locking arrangement and making
necessary holes for inlet, outlet and
overflow pipes but without fittings and
the base support for tank.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
13.25 Providing and fixing enclosed type water -
meter (bulk type) conforming to IS : 2373
and tested by Municipal Board complete
with bolts, nuts, rubber insertions etc. (The
tail pieces if required will be paid
separately) :
150mm dia Ductile Iron Class K-9 pipes 900 Metre 1537.02 1,383,318.00
-
13.29 Providing push on joints to DI pipes -
including testing of joints and cost of
rubber gasket
100mm dia pipes 100 each 69.57 6,957.00
150mm dia pipes 120 each 109.37 13,124.40
-
13.30 Providing and laying S&S D.I. standard -
specials such as tees, bends, collars, tapers,
caps etc. (Heavy class) :
Up to 300 mm dia 5 QTL. 4783.37 23,916.85
-
13.31 Providing and fixing CI double acting air -
valve of approved quality with bolts
nuts,rubber insertions etc, complete
100mm dia 10 Each 7919.18 79,191.80
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
-
14.0 SUB-HEAD: XIV: SEWERAGE -
DRAINAGE :-
-
14.1 Providing, Laying and jointing glazed -
stoneware pipe Class SP1 with stiff
mixture of cement mortar in the
proportion of 1:1 (1 Cement: 1 Find sand)
including testing of joints etc. complete
-
a) 150 mm diameter 2050 metre 349.49 716,454.50
b) 200 mm diameter 3500 metre 452.39 1,583,365.00
c) 250 mm diameter 3500 metre 740.01 2,590,035.00
-
14.2 Constructing brick masonry manhole in -
cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:2:4 mix
(1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), 100 mm
foundation concrete 1:4:8 mix (1 cement : 4
coarse sand : 8 graded stone aggregate
40mm nominal size), inside plastering
12mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with
floating coat of neat cement and making
channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished
with a floating coat of neat cement
complete as per standard design
:Rectangular shape 600x450 mm precast
R.C.C. manhole cover
with frame - L.D. - 25
With FPS bricks of class designation 7.5 140 each 24559.90 3,438,386.00
-
14.7 Constructing Brick Masonry circular type -
manhole 0.91 m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1
cement : 4 Coarse sand), inside cement
plaster 12mm thick with cement mortar 1:3
( 1 cement : 3 coarse sand) finished with a
floating coat of neat cement, foundation
concrete 1:3:6 mix ( 1 cement : 3 coarse
sand : 6 graded stone aggregate 40mm
nominal size) and making necessary
channel in Cement Concrete 1:2:4 ( 1
Cement : 2 Coarse Sand : 4 Graded Stone
aggregate 20mm nominal size) finished
with a floating coat of neat cement all
complete as per standard design.
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
0.91m deep with SFRC cover and frame -
(heavy duty HD-20 grade designation)
560mm internal diameter conforming to
I.S:12592, total weight of cover and frame
to be not less than 182Kg. fixed in cement
concrete 1:2:4 mix (1 Cement: 2 Coarse
sand: 4 Graded stone aggregate 20mm
nominal size) including centering,
shuttering all complete. (Excavation, foot
rests and 12 mm thick cement plaster at
the external surface shall be paid for
separately)
With common burnt clay F.P.S. (non 150 each 9279.46 1,391,919.00
modular) bricks of
class designation 7.5
-
14.8 Extra depth for circular type manhole -
0.91m internal dia (at bottom) beyond
0.91m to 1.67m
With common burnt clay F.P.S. (non 80 metre 5248.75 419,900.00
modular) bricks of
class designation 7.5
-
14.9 Constructing brick masonry circular -
manhole 1.22m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1
cement :4 coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3
(1 cement :3 coarse sand) finished with a
floating coat of neat cement foundation
concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 40mm nominal
size) and making necessary channel in
cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm
nominal size) finished with a floating coat
of neat cement, all complete as per
standard design :
With common burnt clay F.P.S. (non 100 each 17696.87 1,769,687.00
modular) bricks of class designation 7.5
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
14.1 Extra depth for Circular type Manhole 1.22 -
m internal dia (at Bottom) beyond 1.68 to
2.29 m:
With common burnt clay F.P.S. (non 60 metre 6799.13 407,947.80
modular) bricks of class designation 7.5
-
14.1 Constructing brick masonry circular -
manhole 1.52 m internal dia at bottom and
0.56 m dia at top in cement mortar 1:4 (1
cement : 4 coarse sand) inside cement
plaster 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with
a floating coat of neat cement, foundation
concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal
size) and making necessarychannel in
cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat
of neat cement, all complete as per
standard design :
With common burnt clay F.P.S. (non 250 each 37807.12 9,451,780.00
modular) bricks of class designation 7.5
-
14.12 Extra depth for circular type manhole 1.52 -
m internal dia (at bottom) beyond 2.30 m:
With common burnt clay F.P.S. (non 200 metre 16059.51 3,211,902.00
modular) bricks of class designation 7.5
-
14.13 Providing and fixing square-mouth S.W. -
gully trap class SP-1 complete with C.I.
grating brick masonry chamber with water
tight C.I. cover with frame of 300 x300 mm
size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less
than 2.70 kg as per standard design ::
-
14.16.3 b) Size 750x750x750mm inside with 360 each 11870.00 4,273,200.00
precast SFRC rectangular grating of
approved design and sample fixed in 150
thick RCC slab in cement 1:2:4 mix (1
cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) including
centering, shuttering all complete as per
site conditions.
-
14.16.4 c) Size 900x900x900mm inside with precast 50 each 16555.00 827,750.00
SFRC rectangular grating of approved
design and sample fixed in 150 thick RCC
slab in cement 1:2:4 mix (1 cement: 2 coarse
sand: 4 graded stone aggregate 20mm
nominal size) including centering,
shuttering all complete as per site
conditions.
-
14.2 Extra for 450X450X450mm catch basin 30 metre 5379.00 161,370.00
chamber depth exceeding 45cm up to
60cm
-
14.17.1 Extra for 600X600X600mm catch basin 25 metre 7657.10 191,427.50
chamber depth exceeding 60cm up to
75cm
-
14.17.2 Extra for 750X750X750mm catch basin 50 metre 5274.00 263,700.00
chamber depth exceeding 75cm up to
90cm
-
14.17.3 Extra for 900X900X900mm catch basin 40 metre 6375.00 255,000.00
chamber depth exceeding 75cm up to
90cm
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
14.18 Providing and laying cement concrete -
1:5:10 (1 cement : 5 coarse sand : 10 graded
stone aggregate 40 mm nominal size) up to
haunches of S.W./ RCC pipes including
bed concrete as per standard design :
-
14.2 Providing and fixing in position pre-cast -
R.C.C. manhole cover and frame of
required shape and approved quality
HD-20 -
Circular shape 560 mm internal diameter 100 each 1390.20 139,020.00
-
15.0 SUB-HEAD: XV: WATERPROOFING -
WORKS :-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
15.1 Providing and laying integral cement -
based treatment for water proofing on
horizontal surface at all depth below
ground level for under ground structures
as directed by Engineer-in-Charge and
consisting of : i) Ist layer of 22 mm to 25
mm thick approved and specified rough
stone slab over a 25 mm thick base of
cement mortar 1:3 (1 cement : 3 coarse
sand) mixed with water proofing
compound conforming to IS:2645 in the
recommended proportion over the
leveling course (leveling course to be paid
separately). Joints sealed and grouted with
cement slurry mixed with water proofing
compound. ii) 2nd layer of 25 mm thick
cement mortar 1:3 (1 cement: 3 coarse
sand) mixed with water proofing
compound in recommended proportions.
iii) Finishing top with stone aggregate of
10mm to 12mm nominal size spreading @
8 cudm/sqm thoroughly embedded in the
2nd layer.
-
16.0 SUB-HEAD: 16:MISC. WORKS -
16.1 Providing and fixing Chicken mesh jali (22 13666 Sqm -
gauge) at the junction of 2 different
surfaces of different material component at
the time of plastering to prevent cracking
in plaster surface as and where directed at
all floors with all leads and lifts
etc.complete.
-
DSR /NDSR AMOUNT
SL. NO. DESCRIPTION QTY UNIT
DSR RATE DSR AMOUNT
16.4 Providing and erecting 3.00 metre high 3150 metre -
temporary steel barricading (of weight not
less than 72.55 kg/m) at site as per
drawing/ direction of Engineer-in-Charge
which includes writing and painting,
arrangement for traffic diversion such as
traffic signals during construction at site
for day and night, glow lamps, reflective
signs, marking, flags, caution tape as
directed by the Engineer-in- Charge. The
barricading provided shall be retained in
position at site continuously i/c shifting of
barricading from one location to another
location as many times as required during
the execution of the entire work till its
completion. Rate include its maintenance
for damages, painting, all incidentals,
labour materials, equipments and works
required to execute the job. The
barricading shall not be removed without
prior approval of Engineer-in-Charge.
(Note :- One time payment shall be made
for providing barricading from start of
work till completion of work i/c shifting.
The barricading provided shall remain to
be the property of the contractor on
completion of the work).
-
16.5 Providing and supplying aluminium 86432 Kg 361.45 31,240,846.40
extruded tubular and other aluminium
sections as per the architectural drawings
and approved shop drawings , the
aluminium quality as per grade 6063 T5 or
T6 as per BS 1474,including super durable
powder coating of 60-80 microns
conforming to AAMA 2604 of required
colour and shade as approved by the
Engineer-in-Charge. ( The item includes
cost of material such as cleats, sleeves,
screws etc as desired. necessary for
fabrication of extruded aluminium frame
work. Nothing extra shall be paid on this
account)..
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
384.2 42,439,884.60
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
185,456.70 35,236,773.00
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
3139.23 87,427,555.50
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
5017.18 34,452,975.06
-
308.5 207,929.00
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
47.5 1,066,897.50
-
-
542.65 2,150,521.95
-
-
802.4 1,590,356.80
620.3 1,233,776.70
-
-
1135.4 7,436,870.00
-
4182.2 1,614,329.20
-
-
941.25 2,766,333.75
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
259409.4 2,334,684.60
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
204832.15 3,277,314.40
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
1169.16 3,164,916.12
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
6,517.05 8,804,534.55
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
6,624.05 5,842,412.10
6,861.85 157,822.55
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
6,970.30 460,039.80
3,306.78 1,068,089.94
-
3,103.70 3,010,589.00
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
881.95 29,164,322.60
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
24,169.44 109,415,054.88
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
19.75 1,422,000.00
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
8290.75 37,308,375.00
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
2,952.65 7,104,075.90
1,446.60 1,740,259.80
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
1,230.00 1,066,410.00
-
10,162.00 8,810,454.00
-
8,580.00 7,438,860.00
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
1,991.00 354,398.00
-
3,195.00 2,175,795.00
-
7,321.00 2,576,992.00
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
15,305.00 5,387,360.00
-
2,567.00 865,079.00
-
1,489.00 814,483.00
-
2,496.00 1,365,312.00
-
4,404.00 2,408,988.00
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
1,542.00 843,474.00
-
1,371.00 1,987,950.00
-
1,689.00 923,883.00
-
921.00 396,030.00
-
492.00 440,340.00
-
572.00 312,884.00
-
18,804.00 1,353,888.00
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
1,181.00 774,736.00
-
1,715.00 44,590.00
-
395.00 925,485.00
-
-
-
3,375.00 624,375.00
5,508.00 385,560.00
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
769.00 403,725.00
1,108.00 8,864.00
2,041.00 10,205.00
-
-
-
-
-
1,354.00 926,136.00
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
99.00 21,780.00
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
9,435.00 1,717,170.00
10,495.00 4,302,950.00
-
782.00 1,329,400.00
-
925.00 323,750.00
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
11,110.00 666,600.00
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
-
-
-
120.85 1,651,536.10
73483.4 3,968,103.60
-
23,461.30 1,266,910.20
-
DSR /NDSR AMOUNT
NDSR RATE NDSR AMOUNT
2,875.70 9,058,455.00
-
-