Beruflich Dokumente
Kultur Dokumente
LIFTING CAPACITIES
A
A: Reach from swing centerline to arm top
B: Arm top height above/below ground
C: Lifting capacities in kilograms
Shoe: Rubber shoe Dozer blade: Up
B
Rating over front Rating over side or 360 degrees Relief valve setting: 20.6 MPa
Notes: 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*)
specified lift point radius and heights. Weight of all accessories must be deducted from the are limited by hydraulic capacity rather than tipping load.
above lift capacities. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User before operating this machine. Rules for safe operation of equipment should be adhered to at
must make allowance for job conditions such as soft or uneven ground, out of level all times.
conditions, side loads, sudden stopping of loads, hazardous conditions, experience of 6. Lift capacities apply to only machine as originally manufactured and normally equipped by
personnel, etc. KOBELCO CONSTRUCTION MACHINERY CO., LTD.
3. Arm top defined as lift point.
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those
of machines sold in your area. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.
Veluwezoom 15
1327 AE Almere
The Netherlands
www.kobelco-europe.com
Powerful Digging
For more efficient work performance.
operations. Users want big power in a small machine, stable operation, rugged construction and durability to
reduce downtime. The SK25SR combines a compact design with efficiency, maneuverability and durability to
ensure a long working life. Maintenance is easy, with the machine’ s running condition shown on an LCD Maintenance Machine operating Language setting
monitor fitted as standard. Menu switch Function keys hours
The SK25SR is a mini with big aspirations, designed and equipped for full-sized performance over an extend- Function key
guidance
ed working life.
1 2
Compact, Tough Performer PERFORMANCE
Powerful Digging
For more efficient work performance.
operations. Users want big power in a small machine, stable operation, rugged construction and durability to
reduce downtime. The SK25SR combines a compact design with efficiency, maneuverability and durability to
ensure a long working life. Maintenance is easy, with the machine’ s running condition shown on an LCD Maintenance Machine operating Language setting
monitor fitted as standard. Menu switch Function keys hours
The SK25SR is a mini with big aspirations, designed and equipped for full-sized performance over an extend- Function key
guidance
ed working life.
1 2
PERFORMANCE COMFORT
Broader floor space gives operators plenty of foot room. Wide operational space is provided with more room between the left and right
control consoles.
Reliable Construction
SK25SR has the durability needed in a machine that works in tight spaces. Work Light
Cylinder Rod Guard Work light is mounted
The spring steel cylinder rod guard is standard under the boom to Easy Access to Control Panel and Levers
for the bucket, boom and arm cylinder. The use protect from damage.
of spring steel not only protects the cylinder rod, Centralized switches in a convenient PTO/ Boom
Light switch Wiper switch
but gives resiliency to the guard itself. position to allow for simple, convenient (cab specs) swing switch
operation. Heater switch
Boom cylinder rod guard Arm cylinder rod guard Bucket cylinder rod guard (cab specs)
PTO/ Boom
swing selector
Blade Cutting switch PTO hold button
Edge Boom swing
Backfill dozer blade
PTO
has wear-resistant
cutting edge. The proportional control lever is equipped and
Auto deceleration allows you to control boom swing operation and the
switch (option) attachment easily.
3 4
PERFORMANCE COMFORT
Broader floor space gives operators plenty of foot room. Wide operational space is provided with more room between the left and right
control consoles.
Reliable Construction
SK25SR has the durability needed in a machine that works in tight spaces. Work Light
Cylinder Rod Guard Work light is mounted
The spring steel cylinder rod guard is standard under the boom to Easy Access to Control Panel and Levers
for the bucket, boom and arm cylinder. The use protect from damage.
of spring steel not only protects the cylinder rod, Centralized switches in a convenient PTO/ Boom
Light switch Wiper switch
but gives resiliency to the guard itself. position to allow for simple, convenient (cab specs) swing switch
operation. Heater switch
Boom cylinder rod guard Arm cylinder rod guard Bucket cylinder rod guard (cab specs)
PTO/ Boom
swing selector
Blade Cutting switch PTO hold button
Edge Boom swing
Backfill dozer blade
PTO
has wear-resistant
cutting edge. The proportional control lever is equipped and
Auto deceleration allows you to control boom swing operation and the
switch (option) attachment easily.
3 4
Operator Safety
Reliable Cab/Canopy Structure Safety Lever Lock SPECIFICATIONS WORKING RANGES
The high-strength cab/canopy meets ROPS and TOP GUARD LEVEL 1 Safety lever lock GENERAL
standards for greater operator safety. permits enter and MODEL SK25SR a
exit only when the Type SK25SR-6
b
PERFORMANCE
levers are disengaged h
Shoe Type Rubber Steel
to prevent accidental Bucket Capacity m3 0.08
operation. Travel Speed (high/low) km/h 4.5/2.8
Swing Speed min-1 {rpm} 10.0
Gradeability % (degree) 47 (30)
Travel Alarm Traction Force kN 24.4 26.7
d
Bucket Digging Force kN 24.5 24.5
Travel alarm is Arm Crowding Force kN 14.7 14.7
available as an Option. WEIGHT
e
Cab kg 2,670 2,780
Machine Mass
Canopy kg 2,565 2,675 f
Cab kPa 30.9 32.0 i
Ground Pressure
Canopy kPa 29.7 30.9
ENGINE
Model Yanmar 3TNV76-NBVA1
MAINTENANCE Type Water cooled, 4-cycle, 3-cylinder c
g
4,110
35
74°
Air cleaner
2,530
485
1,500
Hydraulic
705
tank
°
47
355 340
320
250
145
1,500 2,040
Figures for cab spec. and canopy spec. are the same value.
Battery
5 6
Operator Safety
Reliable Cab/Canopy Structure Safety Lever Lock SPECIFICATIONS WORKING RANGES
The high-strength cab/canopy meets ROPS and TOP GUARD LEVEL 1 Safety lever lock GENERAL
standards for greater operator safety. permits enter and MODEL SK25SR a
exit only when the Type SK25SR-6
b
PERFORMANCE
levers are disengaged h
Shoe Type Rubber Steel
to prevent accidental Bucket Capacity m3 0.08
operation. Travel Speed (high/low) km/h 4.5/2.8
Swing Speed min-1 {rpm} 10.0
Gradeability % (degree) 47 (30)
Travel Alarm Traction Force kN 24.4 26.7
d
Bucket Digging Force kN 24.5 24.5
Travel alarm is Arm Crowding Force kN 14.7 14.7
available as an Option. WEIGHT
e
Cab kg 2,670 2,780
Machine Mass
Canopy kg 2,565 2,675 f
Cab kPa 30.9 32.0 i
Ground Pressure
Canopy kPa 29.7 30.9
ENGINE
Model Yanmar 3TNV76-NBVA1
MAINTENANCE Type Water cooled, 4-cycle, 3-cylinder c
g
4,110
35
74°
Air cleaner
2,530
485
1,500
Hydraulic
705
tank
°
47
355 340
320
250
145
1,500 2,040
Figures for cab spec. and canopy spec. are the same value.
Battery
5 6
SK25SR-6
LIFTING CAPACITIES
A
A: Reach from swing centerline to arm top
B: Arm top height above/below ground
C: Lifting capacities in kilograms
Shoe: Rubber shoe Dozer blade: Up
B
Rating over front Rating over side or 360 degrees Relief valve setting: 20.6 MPa
Notes: 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their hydraulic lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*)
specified lift point radius and heights. Weight of all accessories must be deducted from the are limited by hydraulic capacity rather than tipping load.
above lift capacities. 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions
2. Lift capacities are based on machine standing on level, firm, and uniform ground. User before operating this machine. Rules for safe operation of equipment should be adhered to at
must make allowance for job conditions such as soft or uneven ground, out of level all times.
conditions, side loads, sudden stopping of loads, hazardous conditions, experience of 6. Lift capacities apply to only machine as originally manufactured and normally equipped by
personnel, etc. KOBELCO CONSTRUCTION MACHINERY CO., LTD.
3. Arm top defined as lift point.
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those
of machines sold in your area. Please consult your nearest KOBELCO distributor for those items you require.
Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.
Veluwezoom 15
1327 AE Almere
The Netherlands
www.kobelco-europe.com