Beruflich Dokumente
Kultur Dokumente
1. Background of Information
We would like to inform you that the adjusting procedure of the "Arm recirculation timing
adjustment". If customer complains the speed of arm digging, adjust this value as necessary.
2. Information
1. Initial value is set to 00.06 (Indicated ” 6” on display) at the factory before shipment.
2. Adjustable range: 1, 3, 6, 8, 10, 15, 17, 20, 30, 40, 50, 80, 100, 150, 300, 400, 500
Arm digging speed and fuel consumption increase when the value is raised.
1-2 Press screen change switch to display the desired screen display No. 20, which shows Prop
Valve for P1 BY-PASS. (Refer to display B)
Display A Display B
This bulletin is issued for information only and is not
an authorization for warranty claim submission. Working light
1
Issue Date : 2005/9/16
Bulletin No. : S030-60-K002
4. Adjusting procedure
1-3 Press "Working light switch" 3 times, keeping "Work mode selector switch" pressed, and the
"adjustment mode" appears. (Refer to Display C)
Working light