Beruflich Dokumente
Kultur Dokumente
Producto: EXCAVATOR
Modelo: 325D L EXCAVATOR SCR00287
Configuración: 325D & 325D L Excavators SCR00001-UP (MACHINE)
POWERED BY C7 Engine
Desarmado y Armado
C7 Engines for Caterpillar Built Machines
Número de medio -RENR9218-11 Fecha de publicación -01/08/2012 Fecha de actualización -08/08/2012
i02304034
Installation Procedure
Table 1
Required Tools
A 6V-4876 Lubricant 1
NOTICE
Illustration 1 g01153645
Illustration 2 g01153662
Note: To avoid damage to the cylinder head gasket, use guide bolts of an appropriate size to install the
cylinder head.
2. Attach a suitable lifting device to cylinder head (11). The weight of cylinder head (11) is approximately
175 kg (385 lb). Position cylinder head (11) onto the cylinder block.
3. Apply Tooling (A) to the threads and both sides of the washers of bolts (12). Apply Tooling (B) to the
threads and both sides of the washers of bolts (13). Install bolts (12) and bolts (13) .
a. Tighten Bolt (1) through Bolt (14) in a numerical sequence to a torque of 300 ± 15 N·m (221 ± 11
lb ft).
b. Loosen Bolt (1) through Bolt (14) until the washers are loose under the bolt heads.
c. Tighten Bolt (1) through Bolt (14) in a numerical sequence to a torque of 130 ± 15 N·m (95 ± 11
lb ft).
d. Tighten Bolt (1) through Bolt (14) again in a numerical sequence to a torque of 130 ± 15 N·m (95
± 11 lb ft).
e. Turn Bolt (1) through Bolt (14) in a numerical sequence for an additional 90° (1/4 turn).
f. Tighten Bolt (15) through Bolt (20) in a numerical sequence to a torque of 55 ± 7 N·m (41 ± 5 lb
ft).
Illustration 3 g01153600
5. Connect tube assembly (8) and tube assembly (10) to turbocharger (9) .
Illustration 4 g01153599
Illustration 5 g01153598
End By:
a. Install the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group -
Remove and Install".
b. Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Install".
c. Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft And Pushrod -
Install".
d. Install the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover
Base - Remove and Install".
Copyright 1993 - 2013 Caterpillar Inc. Wed Apr 17 2013 07:40:11 GMT-0400
Todos los derechos reservados.
Red privada para licenciados del SIS.