Beruflich Dokumente
Kultur Dokumente
Remove and Disassemble Oil Pressure 3. Remove the spring seat, spring and valve from the
Regulator Valve valve body (Fig. 4).
1. Remove the regulator valve-to-cylinder block bolts Inspection
and lock washers. Remove the regulator valve and
gasket. Discard the old gasket. Clean all of the regulator components with fuel oil and
dry them with compressed air.
SPRING SPRING VALVE VALVE e CAUTION: To prevent possible
personal injury, wear adequate eye
protection and do not exceed 40 psi
(276 kPa) air pressure.
The regulator valve must move freely in the valve
body. If the valve or the valve body is scored and cannot be
cleaned up with crocus cloth, replace them.
Replace a pitted or fractured spring.