Beruflich Dokumente
Kultur Dokumente
imaging
BOWENS
355 Old Road • Clacton on Sea • Essex • CO15 3RH • United Kingdom
www.bowens.co.uk
Writing
with
Light
Photography has come a
long way in 150 years, but
no matter what advances
are made in camera
technology there can be no
substitute for perfect light.
Ready indicator
IR remote receptor
Photocell receptor
Outlet On/Off switches
Power level displays
Channel B
Channel A adjustment adjustmnet
Photocell Switch Overall
Power adjustment
IR Remote Switch
Modelling Lamp On/Off Flash test button
POWER &
with precise power adjustments and The unique power-management system of the With its sophisticated circuitry, the QUADX Head Failure Indication
dependable repeatability. With a maximum QUADX constantly monitors and adjusts The control panel of the QUADX is simple and
gives the photographer access to many The QUADX will indicate that a head has failed
CONSISTENT
power of 3000w/s and a minimum of just 31w/s capacitor performance to ensure complete intuitive to use. Power is divided into two advanced features including trigger delay, flash to fire and the pack will not fire again until that
with one head - a power range of 7.6 f/stops! output accuracy and consistency, retaining a head is switched off.
independent channels, A and B, one having a counter, joules/percentage display, multi-flash
The QUADX offers a wide range of lighting colour temperatre of 5800 K, ±2%. The units
COLOUR
mode, memory function and more. Other
control options with precision adjustments and a capacitor switching delivers greater colour maximum power of 2000w/s (A), the other (B) Special Effect Modes
features offered by the QUADX include:
user-friendly control panel that lets you know consistency over the entire power range in
1000w/s. Each channel controls two flash-head Choose from trigger delay, trigger skip and
OUTPUT”
exactly how much power is coming out of each addition to providing flash durations as short as
Auto Bracketing multi-trigger setup to fire up to nine packs at
head, the flash duration and a host of other vital 1/1430 sec. with a single head at full power outlets in 1/10-stop increments. When more than
Bracketing flash exposures is easy with the different intervals or sequentially.
statistics, all at the press of a button. (1/7100 sec. with two heads at 250w/s).
one head is used in the same channel, the QUADX. You can set up to three bracketing
Precision Power Controls and Most Efficient Charging System. power of that channel will be divided equally intervals from 1/10 to 9/10-stop and monitor the Overload Protection
With flash durations as fast as Repeatable Performance. The QUADX features an advanced charging bracketing sequence and see what each power The QUADX has two cut-out switches that can
between those two heads. When a head is be quickly reset should any overload be
1/7000 of a second, QUADX Digital capturing devices require a much greater system that is extremely efficient and extends level will be on the LCD display.
degree of exposure accuracy than film the life of the pack’s capacitors. The automatic connected to Channel B, the pack automatically experienced.
from Bowens sets new materials. The QUADX lets you control the mode provides a slow initial charge when the Infrared Remote
becomes asymmetric. Once lighting ratio or
standards for studio lighting in flash output of each head in 1/10-stop increments unit is switched on and then, by monitoring the The QUADX features an IR remote control
and offers repeatable output flash after flash, temperature of the capacitors, offers the fastest contrast levels are set, power level adjustments system that allows the photographer full control
todays digital world. which is ideal for multi-shot camera backs. possible recharging times. can be made to acheive perfect exposures. of the pack from up to 10m (30').
Portrait on Page 1
Lighting: Two QUADX 3000 packs
Three QUADX heads
Camera: Canon EOS 1Ds Digital SLR
Photographer: Art Wise
Model: Kimberly Meloney
Stylist: Alfred Lester
Agency: Ford Modeling Agency
• Flash durations faster than 1/7000 sec. are made possible with the use Power adjustment: 1/10-stop • Overload protection from 15A thermal breakers for charge and Colour temperature:5600 K (with UV flash tube)
of triple electrode flash tubes in the QUADX head Colour temperature:5800 K (±2% from 3000 to 200w/s) modelling Sync voltage: 6V
• Auto-bracketing is easy to set up with three-intervals from 1/10 to 9/10-stop Sync voltage: 6V • Switchable photo cell Stabilisation: ± 0.1%
• An optional IR Remote Control System allows photographer to control Stabilisation: ± 0.1 f/stop • Switchable audio ready signal Dimensions: 18 x 28 x 34cm (7 x 11 x 131/2”)
all functions up to 30 feet away BW7620
Dimensions: 7 (w) x 14 /4 (l) x 14 /2 (h)
1 1
Weight: 9.5 kg (21 lbs)
• Variable-speed cooling fans respond to internal temperature changes to
Weight: 25.5 lbs.
ensure peak performance
BW7600
Sync. Sockets
Fast/Slow Recycle
Switch
Master
Power Level Control
Channel A Channel B
Power Level Display Power Level Display
Channel A Channel B
“THE PACK
QUAD Power Versatility. Colour Consistency Mastered. The QUAD 2400 Control Panel Other QUAD 2400 Features
With two channels, choose from taking the full The overall power of the pack can be reduced
BUILT WITH
2400Ws from a single socket, or dividing the using a system of capacitor switching. By The QUAD 2400 offers a host of features that Unique Modelling Modes
The control panel of the QUAD 2400 is designed
power across two channels giving a wide reducing the number of capacitors being used a are designed to make the photographers job Intermittent modelling mode extinguishes all
selection of powers. Once the pack is switched greater level of colour consistency can be for quick and easy use. There are two flash- modelling lamps when the pack is fired and
DIGITAL
easier:
to its asymmetrical mode, two channels, each achieved. In practice this means that the head outlets, each operating on its own turns them back on again when the pack is
with a maximum power of 1200w/s are QUAD 2400 can be switched from 2400w/s, to Two sync. sockets 100% recycled. This provides a visual
USERS IN
available. As each can be adjusted 1200w/s to 600w/s with less than 70K shift in independent channel with a maximum power of indication that the pack, and each head, has
Two conveniently located sync. sockets allow
independently of the other a great deal of colour temperature. 1200w/s each. A master control provides two- you to simultaneously connect your pack to your been successfully triggered and recycled.
MIND”
lighting flexibility can be achieved. camera and your light meter without time
stops of power control in one-stop increments,
consuming disconnections and reconnections. Flash Voltage Stabilisation
QUAD Precision Power. Modelling Lamp Control. while independent channel variators offer three- These sync sockets can also be used for IR or To ensure consistently dependable output the
Flash power can be adjusted in accurate steps In addition to selecting full power modelling or radio triggers such as the Bowens Pulsar; for QUAD 2400 offers ±1% flash-voltage
Using capacitor switching, the stops of power control in 1/3-stop increments to
of 1/3rd f-stop, offering excellent control of lamps in proportion, a new Auto setting will set wireless triggering. stabilisation at maximum power.
QUAD 2400 ensures total exposure. Large LED displays show clearly the the modelling lamp of the brightest head to each channel. Power levels for each channel
colour consistency. The power Ws output per channel. Each channel can be maximum, even when the overall flash power of are provided in easy-to-read LED numeric Audio Ready Signal Built-in Photo Cell
adjusted over three f-stops. With a minimum the pack is set at a low level. This helps the This switchable signal lets you know when your In order to activate your QUAD 2400 pack from
can be adusted in 1/3 f-stops, power output of just 37w/s the QUAD 2400 has photographer preview their lighting, even at the
displays. A full-power indicator light lets you
other flash units, a convenient photo cell is built
pack is 100% charged even when it is out of
perfect for digital work. a range of 6 f-stops. lowest of flash powers. know when the pack is 100% charged. visual range. directly into the pack.
www.bowens.co.uk - 11 - - 12 - www.bowens.co.uk
1 2 3
8 9
6 5 4 10 11
1 120° Wide Angle Umbrella Reflector 3 75° Softlite Reflector 5 Reflector Kit 7 Supersoft 600 Diffuser for Sunlite 40 8 40° Sunlite Reflector 10 Grid Reflector
Designed to be used with and to support This 15" matt-finished reflector is supplied with a An innovative lighting control outfit composed of Here is the ultimate soft beauty light. The A 43cm (17") white-painted reflector designed to With a rolled rim and indent, this medium-angle
umbrellas, this 15cm (6") reflector has a very double diffuser cap that covers the flash tube a reflector, snoot and four-leaf barn door, the Supersoft 600 mounts directly into the front of replicate sunlight for photographing such things reflector will hold an 18cm (7") honeycomb.
wide, even coverage, making it perfect to spread and modelling lamp for added softness. The Bowens Reflector Kit represents exceptional the Sunlite 40. Its super-large 600mm (231/2") as architectural models. The white-painted BW1863
light over broad areas. Its very small diameter softest of Bowens’ direct reflectors, it is perfect value for studio and location photographers. The front diameter reflector and unique three-layered interior of the Sunlite reflector helps ensure that
creates hard shadows and high-contrast lighting. for portraiture, beauty and small product efficient reflector is optimised for light spread and diffusion design creates a large, soft light source the light delivered is even. BW1868
BW1885 photography. The diffuser cap can be removed, has a 60° coverage. The interchangeable snoot that is completely even and delivers perfectly 11 Set of Three Honeycombs
making it an excellent large-diameter direct and barn door attachments bayonet quickly onto round catch lights for fashion and beauty 9 Backlite Reflector This set is designed to be used with the Grid
2 50° Keylite Reflector reflector. BW1899 the main reflector, providing instant light control. applications. The internal baffle is printed with a Reflector. The three sizes offer 1/8” (3.175mm),
BW1882 computer-designed light distribution pattern to With its 20 x 30.5cm (8 x 12") elliptical shape, 3
/8” (9.525mm) and 1/4” (6.35mm) hole sizes, each
This is a very high output 24cm (91/2") reflector reduce the centre brightness of the reflector. A this reflector produces an oval pool of light that
4 Grid Diffuser with increasingly wide-angle spots of light.
that creates a highly specular result. It’s the double-layer front diffuser completes the can be used to create a natural vignette on a BW864
perfect reflector to be used where maximum light This is an accessory to the 75° Softlite Reflector 6 High-Performance Reflector softening effect. BW1884 background or other areas. Two fitted spring
output is required. It’s also a superb reflector for that creates a unique lighting effect by including clips allow colour gels to be fitted. BW2560
This 32cm reflector achieves the maximum Supersoft 600 Kit
bouncing light off ceilings or simply to give the a Perspex outer diffuser with a honeycomb grid
amount of light output possible for lighting large A set of colour gels including seven popular
maximum possible depth of field. BW1886 in the centre. The Grid Diffuser gives a pool of This complete kit includes the Sunlite 40,
groups and bouncing light off of high ceilings. colours, a neutral-density filter and two diffusers
direct light in the centre, surrounded by soft- Supersoft 600 reflector, front diffuser screen and
The efficient parabolic design delivers a narrow, for heightened lighting creativity is also available
diffused light. The ratio between the centre and inner baffle. BW1868/84
bright beam of light with intense shadows and for the Backlite Reflector. BW2552
edge is 3:1 - ideal for portrait applications.
high contrast. A must where sheer power is
BW1866
required. BW1878
www.bowens.co.uk - 13 - - 14 - www.bowens.co.uk
16 17
12 13
20
14
15
19 18
12 65° Maxilite Reflector 14 Gel Filter Holder for Maxilite 17 Universal Clip-On Barn Doors Bowens Jetstream Wind Machine Fresnel 200 Spot Attachment Pro-Spot
This is a good general-purpose direct reflector with Allows light to be gelled or coloured. BW2368 These are a must for anyone using direct The variable-speed Jetstream Wind Machine This 200mm Fresnel lens produces that classic This is the perfect accessory to create a host of
an even coverage and a high light output. Since it Maxilite Gel Set. BW2364 reflectors to enable the spread of light to be makes special effects a breeze and adds a Hollywood-style of lighting unique to Fresnel unique lighting effects. The 1500w/s Pro-Spot
has a small 20cm (8") diameter, the light it precisely controlled. BW1869 sense of motion to your shots. It’s great for spots. A built-in iris gives very tight control of the incorporates a bright 50W reflector modelling
produces is moderately high in contrast. The glamour shots or for controlling the smoke or fog light pool, making it ideal for product lamp. This optical spotlight has been engineered
stippled surface ensures a smooth and even light 15 Four-Way Barn Door & Gel Holder on a set. For maximum gusts, turn the control to photography. This versatile light is also good for to produce clean sharp images using a highly
distribution. BW1887 18 15° Snoot full power and you’ll create 2400 RPM of classic portraits and for precise control in efficient 85mm f/2.8 projector lens. The unit
Also designed for use with the Maxilite to give
For creating a simple spot effect, this 10cm (4”) controllable wind! Its remote operating cable commercial work. BW2914 incorporates a powerful cooling fan to maximize
greater control of light output. BW2363
13 Maxilite Honeycombs cone can also be used as a hair light light, enables you to control speed levels from up to operating times.
putting a pool of illumination on the hair without 6m (20’) away, so you can go from a light draft to Designed to accept 2.6” and 3.4” gobos and
These fit on to the front of the Maxilite Reflector and 16 Universal Honeycombs spilling on to the face or background. BW1888 a gentle breeze to an intense bluster without Univeral Spot Attachment
deliver a very tightly controlled pool of illumination, patterns, the Pro-Spot appeals to many different
leaving your camera. This unique light-head attachment features a types of photographers. For the portrait
creating a highly efficient spot effect These are designed to fit a wide range of
19 Honeycomb for snoot The Jetstream measures 30.5(l) x 25(d)cm (12 x high-quality optical system that allows the photographer, it can be used to project patterns
Bowens reflectors. The adjustable fittings clip
BW1891 - A 3/8” (9.525mm) hole creates a wider When even tighter light is required this clips 10”), weighs only 6.3kg (13.5lbs) and features a projection of gobos, patterns and cut-outs on the and effects enhancing any portrait. For the
over the rim of the reflector.
angle spot effect. simply to the front of the snoot. BW1862 5
/8” mount to fit most light stands. background or onto the subject. It can also be commercial photographer, the ability to place
BW1861A - A 3/8” (9.525mm) hole creates a wider used as a focusing spot to light very specific
BW1892 - A 1/4” (6.35mm) hole creates a narrower Jetstream (240V) - BW2550 light with pinpoint accuracy is invaluable.
angle spot effect. parts of the subject. The gobo holder (included)
angle spot effect. 20 Multiclip The Pro-Spot is supplied with a set of round
BW1861B - A 1/4” (6.35mm) hole creates a Jetstream (117V) - BW2550B accepts standard M-size gobos. BW1880
Invaluable to all photographers, the multiclip has apertures to give precise circular spots of light.
narrower angle spot effect. A Set of 12 M-size gobos is available. BW1879.
thousands of uses around the studio. BW1826 BW7670
www.bowens.co.uk - 15 - - 16 - www.bowens.co.uk
WAFER ---
The Wafer Light Bank System
Wafer Accessories
The Wafer is probably the most
innovative light bank on the market, Oval Diffuser
producing a beautiful quality of light and A translucent fabric diffuser with
offering a degree of control unmatched black oval mask that converts
by similar products. Its range of shapes rectangular light banks into ovals.
and sizes is almost as big as its range Perfect for those shots where a
of accessories, making the Wafer rounded highlight or catch light is
suitable for a variety of work in all desirable.
disciplines. For Wafer 75 BW1196
Wafer light banks produce a crisp, For Wafer 100 BW1977
smooth quality of light while their
For Wafer 140 BW1197
narrow profile and silver/white interiors
Wafer Honeycombs
with two interchangeable graduated
inner baffles deliver unparalleled Hex Oval Diffuser A lightweight, aluminium
flexibility and control. honeycomb on a frame is fitted
These shaped diffusers for the into the recess at the front of the
The Wafer design is supplied with two Hex Oval soft boxes create a Wafer soft box. Ideal for product
internal Mylar baffles or screens, each rounded catch light. photography, giving a soft,
printed with a special pattern to ensure For Wafer Hex 100 BW1194 controllable pool of illumination.
the light distribution on the front cloth is
For Wafer Hex 140 BW1185 For Wafer 75 BW1160
absolutely even over its entire surface.
These baffles also assist in controlling For Wafer Hex 180 BW1186 For Wafer 100 BW1161
the colour temperature: one is white
and the other is blue for more neutral
tones.
The front cloth of the Wafer is recessed
to help control light spill. The resulting Strip Wafers Hexagonal Wafers Rectangular Wafers Flash and Light Head Adapter Rings
internal edge has a hook-and-loop Wafer 140
Wafer Strip 100 Wafer Hex 100 Wafer 56 Wafer soft boxes can be used with most major
lining, allowing an accessory 140 x 100 x 50cm (53 x 40 x 193/4”) studio lighting systems. Simply attach the
100 x 38 x 25cm (75 x 15 x 11”) 100 x 70 x 30cm (39 x 27 x 12”) 56 x 25 x 28cm (22 x 10 x 11”)
honeycomb to be fitted to the front for appropriate adaptor to the mounting rings
additional directional control. Ideal where more contrast and a sharper edge to Ideal for single head-and-shoulder portraits or for Here is a compact soft box for small still life, For full-length portraits and fashion, also good
for larger sets. This unit is extremely soft supplied.
the shadows is required. BW1180 greater contrast on 3/4-length shots and fashion. either as a main or rim light. It also provides an
The Wafer is supplied in a stowage BW1195 exceptionally good hair light. BW1894 because of its size. BW1897
Wafer Strip 140 BW1954 - Bowens/Calumet/Redwing
pouch for convenient portability and
140 x 35 x 50cm (55 x 133/4 x 193/4”) Wafer Hex 140 Wafer 75 Wafer 200 BW1953 - Bowens L Type
includes the flash adaptor speed ring.
140 x 95 x 37cm (55 x 371/2 x 141/2”) 75 x 50 x 28cm (30 x 193/4 x 11”) 200 x 140 x 65cm (76 x 53 x 251/2”)
Brand specific flash adaptor rings are For longer coverage than the 100 Strip. BW1181 BW1955 - Balcar
available for every leading studio For single portraits or small groups where a This medium-sized soft box is great for still life, An enormous soft light that is still lightweight BW1956 - Multiblitz Large
Wafer Strip 200 enough to hang on Hi-Glide tracking or boom
lighting system. natural vignette is required. BW1182 single portraits or for more contrast lighting in BW1961 - Multiblitz Small
200 x 70 x 62cm (195 x 271/2 x 241/2”) arms, the Wafer 200 is beautiful for full-length
larger sets. BW1895
Wafers are available as rectangles, Full-length fashion with hard-edged lateral
Wafer Hex 180 work, group portraits and large products. BW1957 - Elinchrom
which are by far the most popular and contrast. Good overhead light source to 180 x 135 x 52cm (71 x 53 x 201/2”) Wafer 100 BW1898 BW1958 - Broncolor Impact
versatile. Hexagonal Wafers are seperate subjects from background. BW1184. A broad beautiful light for almost any subject. 100 x 75 x 35cm (40 x 30 x 14”)
BW1959 - Broncolor Pulso
especially good for portraiture whilst the great for larger groups. BW1183 Our most popular size, this soft box is suitable
strips, which produce much sharper All Strip Wafers are supplied with one full-width and BW1960 - Broncolor TA
for full-length portraits, small groups and product
cut-off, are popular with fashion one half-width front diffuser. The half-width diffuser BW1962 - Courtnay
provides an even sharper cut-off and harder edge to illustration. Still compact enough for location.
photographers. the shadows. BW1896 BW1997 - Hensel
www.bowens.co.uk - 17 - - 18 - www.bowens.co.uk
Light-Softening Tools
Octo 150 Silver/White Umbrella Bowens Soft Boxes Soft Box Strip Soft Box Accessories
Octo 150 is a unique large soft box which offers The other significant advantage of this design is These dual-purpose umbrellas feature a white 100 x 40cm (391/2 x 153/4”)
The Bowens range of soft boxes has been
several non-traditional soft box features that will the interior silvered and white surfaces which interior surface backed by a removable silver The narrow profile of the strip gives a much sharper cut Internal Diffuser
developed to offer photographers the very off, making it ideal for fashion and beauty. BW1710
be of particular interest to portrait photographers. have been designed to ensure optimum fabric with a black exterior. This provides a soft
highest-quality light source at a very modest Clips into the centre of the soft box to give
evenness of illumination on the cloth and but highly efficient bounced light source. for
Unlike other large octagonal soft boxes on the Soft Box 60 absolutely even illumination across the front
because of this can be used close to the subject close-up lighting, the silver/black backing can be cost. Their silver interior and shallow
market, the Octo 150 features a perfectly round 60 x 60cm (231/2 x 231/2”) diffuser.
to produce maximum softness as well as removed, allowing you to get closer to the construction offers a high degree of
front diffuser for perfectly round catch lights Ideal for the small portrait or still life photographer. For Soft Box 100 - BW1780
maximum light output. BW1650 subject while lighting through the umbrella. efficiency while a translucent diffuser
which are cleaner and more pleasing. Another BW1715
difference is that the light is mounted in the unit RD4036 - 90cm Silver/White Umbrella ensures even light distribution. For Soft Box 140 - BW1781
facing the rear cloth, away from the subject. This RD4046 - 115cm Silver/White Umbrella Soft Box 100
If absolute evenness is critical for the larger
offers two distinct advantages over traditional 100 x 100cm (391/2 x 391/2”)
soft boxes. The first advantage is that the Octo
115cm Silver Umbrella RD4060 - 140cm Silver/White Umbrella sizes, internal diffusers are available as an Carry Bags
Our most popular size, suitable for a wide range of
150 does not have extra layers of diffusion fabric The silver umbrella provides maximum accessory, as are carry bags for storage Keep your Soft Box protected when on
photography. BW1720
between the light source and the front diffusion reflectance and a circular pattern of directional and location work. location work.
fabric making it an extrmely efficient soft box that light. Its versatile and efficient performance has Soft Box 140 For Soft Box 60 & Strip - BW1765
can be used even with small flash units such as made it a staple for studios across the world. Each soft box comes supplied with a casting
140 x 140cm (55 x 55”) For Soft Box 100 & 140 - BW1770
an Esprit 500. RD4146 and Bowens’ S adapter. Each will accept all The ideal size for full-length fashion work as well as
Wafer adapters and can be used with most room sets and general photography where a very soft
popular flash systems. light is required. BW1725
www.bowens.co.uk - 19 - - 20 - www.bowens.co.uk
QUAD
imaging power