Beruflich Dokumente
Kultur Dokumente
DEB2332 1
7. Credit Value: 2 credits
8. Prerequisite (if any): None
9. Course Learning Outcomes (CLO):
CLO1 Select the correct meter ,range for specific measurement and calibrate meter for current, volt, ohms.
(C2,PLO1)
CLO2 Select the correct signal generator, determine type of waveform and amplitude from signal generator,
Setup and operate oscilloscope and Measure waveform parameters. (P3, PLO2)
CLO3 Identify specific reading identify and check the condition of various type of measuring instrument and
Calibrate and keep record of measuring equipment (A2, PLO3)
10. Transferable Skills (Skills and how they are developed and assessed, project and practical experience and internship):
DEB2332 2
11. Teaching-learning and assessment strategy :
12. Synopsis :
This course covers theory operation and maintenance of test instrument,measuring instrumentssuch as Select the correct meter and range for specific
measurement, It’s also cover’s Calibrate meter for current, volt, ohms and Select the correct signal generator, student will be determine type of waveform and
amplitude from signal generator after they setup and operate oscilloscope.All the measured waveform parameters, reading and the condition of various type of
measuring instrument and Calibration will be recorded.
13. Mode of Delivery :Lecture, Tutorial, Practical, Demonstration, Case Study, Project, Tutorial, Group Work
DEB2332 3
14. Assessment Methods and Types : Assignments, Tests and Final Examination, Practical work and Practical Examination, Lab presentation
Type of
No CLO
Assessment
Continuous Assessment CLO 1- C2,PLO1 CLO 2- P3, PLO2 CLO 3-A2, PLO3
-Test 10%
1 -Practical work
(i) Assignment 20%
(ii) Presentation 20% 10%
Final Examination
2 Theory 10%
Practical 30%
Sub Total 20% 70% 10%
Total 100%
DEB2332 4
16. Mapping of the course/module to the ProgrammeLearning Outcomes :
PLO2
PLO3
PLO5
PLO6
PLO8
PLO1
PLO4
PLO7
PLO9
Course Los / Program LOs
Select the correct meter, range for specific measurement and calibrate
X
meter for current, volt, ohms.(C2,PLO1)
Select the correct signal generator, determine type of waveform and
amplitude from signal generator, Setup and operate oscilloscope and X
Measure waveform parameters. (P3, PLO2)
Identify specific reading identify and check the condition of various type
of measuring instrument and Calibrate and keep record of measuring X
equipment. (A2,PLO3)
DEB2332 5
17. Content outline of the course and the SLT per topic:
NON F2F
Total (Hours)
FACE TO FACE
Week Course Materials Assessment
Self-Study
Practical
Tutorial
Lecture
1.0 INTRODUCTION TO MEASUREMENT CIRCUIT 3 - 9 - 5 17 Test, Practical work
1.1 Wheatstone Bridge
1.1.1 Explain the principles of Wheatstone Bridge
1.2 H-Bridge Circuit
1-3 1.2.1 Explain the principles of H-Bridge
1.3 Error And Accuracy Definition
1.3.1 Define error and accuracy definition
1.3.2 Identify types of error and accuracy in measurement.
1.5 Lab –Perform Complex Audio Video Printed Circuit Board
4-6 Test.
2.0 VOLTAGE MEASUREMENT TECHNIQUE 3 - 9 - 5 17
Practical Work
2.1 Voltmeter
2.1.1 Explain the function of Voltmeter
2.2 How to calibrate
2.2.1 Describe Voltmeter calibration
2.3 Circuit Connection
2.3.1 Explain circuit connection of Wheatstone Bridge
2.3.2 Explain circuit connection of H- Bridge
STUDENT LEARNING TIME (SLT)
NON F2F
Total (Hours)
FACE TO FACE
Week Course Materials Assessment
Self-Study
Practical
Tutorial
Lecture
2.4 Type of sensor for voltage measurement
Test,
3.0 CURRENT MEASUREMENT TECHNIQUE 3 - 9 - 5 17
Practical Work
3.1 Ammeter
3.1.1 Explain the function of Ammeter
7 -9 3.2 Circuit Connection
3.2.1 Explain circuit connection of Wheatstone Bridge
3.2.2 Explain circuit connection of H- Bridge
3.3 Circuit Connection
3.4 Type of current sensor
Test,
4.0 TEMPERATURE MEASURMENT TECHNIQUE 2 - 6 - 4 12
Practical Work
4.1 Type of temperature Technique
4.1.1 Thermo Couple
4.1.2 Resistance Temperature Detector (RTD)
10-11
4.2 Circuit Connection
4.2.1 Explain circuit connection of Thermo Couple
4.2.2 Explain circuit connection of Temperature Detector
(RTD)
4.3 Calibration technique
STUDENT LEARNING TIME (SLT)
NON F2F
Total (Hours)
FACE TO FACE
Week Course Materials Assessment
Self-Study
Practical
Tutorial
Lecture
Test,
5.0 INSTRUMENTATION 3 - 9 - 5 17
Practical Work
5.1 Introduction of signal generator
2.3.1 Define of Signal Generator
12-14 5.2 Type of signal waveform
5.3 Introduction to Oscilloscope
2.3.1 Define of Oscilloscope
5.4 Introduction to Multimeter
5.4.1 Define of Multimeter
15 Final exam ( Theory) - - 2 - 3
16-17 Final exam (Practical) - - - 3 - 3
Total 14 - 42 5 24 80
Notional Hours 40
Credit Value 2