Sie sind auf Seite 1von 13

What is thyristor?

For an 100kw generator, only 50kw of load is connected. Will the generator
generate only 50kw or 100kw. If it generate 100kw what happens to rest of
the 50kw. What happens if we connect more than 100kw of load?

Why the suply frequency in INDIA is 50HZ

What is the power ratio between power in Star and Delta circuit?

What is the difference between earth and neutral

What is the difference between Earthing & grounding

What is a u.p.s

At what condition a synchronous motor acts as a synchronous condenser?

How is a 100 MVA transformer cooled?

What is the instantaneous value of voltage in a 3-phase balanced star


connected circuit?

What is the difference between regulator and stabiliser.

Whats happens when we give DC to a induction motor?

Describe How energy is stored in a inductor on electronic level

How do we select a cable for a machine as per standards. Is there is any


standard to select a cable as per voltage, or as per KVA and as per amps
ratings?

Is it possible for a feedback surge to travel over a wireless connection?


Would the answer be different in a vacuum?
.
What is the voltage drop for 100kw motor if the length of the cable is 200m
and what is the cable size.
What is the different between CGS system and MKS system?

How to Simulate an Induction motor?

When there is a sudden loss in the demand what happens to the transformer
and generation?
How do you measure the leakage current in a house wiring?

What are the technical reasons for soaking transformers for various times
before allowing them to pick load after a fault or maintenance outage or as a
new installation.

When we connect the capacitor Banks in Series with the circuit

Why is the transformer rated in KVA?

What is the function of a choke in tube light?

How do you detect the exact location of a cable fault if its cable puncture

When we increase load , current drawn from source also increases why ?

What is the reason of power development in synchronous generator due to


saliency ?

What is the purpose of calculating knee point voltage for Current


transformers?

What will happen if we apply dc volt across transformer?

Is possible to increase the voltage without using transformer? Why?


Why less loss occurs when we use DC supply than AC supply?

Earth has the constant potential so we take it as reference.but in steo & touch
voltage we use to calculate

Why Transistors are not used as switching devices?

What is watt?

In a synchronous motor armature current flows due to revolving flux which


in turn rotates the load, but in no load condition armature current is zero
hence there is no revolving flux then how motor rotates?

Does HVDC mode of transmission has an economic advantage over EHV-


AC transmission. Justify
Why we are using Sinusidol wave in all electrical systems?

Why the generators are made such that they generate only sinusoidal wave?

What is the voltage that is supplied to the electric traction trains?

What is DIV? What does 100V/DIV or 50A/DIV mean?

How to find the terminals in SCR? Also in BC327 transistor?

What is induction motor?

What is a Transducer?

What is the use of SCOTT connections?


What is the difference between P,PI,PID CONTROLLER?

What is Synchronous condenser ?

How much should be the insulation resistance value of a 5KW motor and
50KW motor?

Why we cannot use the capacitive load?

What is the purpose of coupling capacitor?

What is the purpose of Q-point in transistor?

What is meaning by the SKIN effect in electrical circuits

Why are we employing star type transformer at transmission end and delta
type transformer at receiving end?

What is difference between potentiometer and rheostat?

What is the value of reflection co-efficient of tranmission line having


VSWR?

What is a DSM(Demand Side Management)?.

What is the main Electrical IS rules?.

How much voltage is present in neutral resistance? And how much voltage is
present in earth resistance

What is the resistance between neutral and earth.


What is Particle Swam Optimisation?

What is the effect of pole slipping in generator and how it will slip?

What is signal?

What is Gsm?

What about AMPS?

What EDGE?

What is GPRS?

What is Ciphering?

Difference Between Noise and Attenuation?

Explain the operation of a transistor

What is the use of control panels in transmission systems?

What is the flyback convertor?

What do you mean by traction system, What type of traction system is used
in electric train.

How snubber circuit works to protect switching devices?

What is the difference between AC choke (inductor) and DC choke


(inductor), working and design point of view?
Why secondary of open delta pt (two element pt) centre tap is earthed? What
happen when this earth is removed?

Alternators are invariably star connected why?

What is the difference between SSR drive& AC drive?

What will be change in programming when we use 5/3 solenoid in place of


5/2 in operating of a cylinder?

What is isolation Transformer?

Why battery is connected in series?

Why Transformer in KVA?

What is function of pump in DG?

why DG neutral is earth?

What is the principle of high speed direct drive motor ?

Can we load Power capacitors on DG sets?

What are the factors required for selection of transformer rating?

Why the frequency is 50 hz in india.can we use some other frequency.if so


what is the range and what will be the effect in present power system if we
change the frequency as you suggest ?

Consider a 415v/200v step down transformer.can we use use it as step up


transformer by giving 200v in secondary and taking output from primary?

What is the maximum genarating voltage in india?

How power cable & control cable can be differentiate from each other?
We have one ups its neutral is not earthed. Its one distribution MCB has a
earth fault .but we can not put off any MCB. So how to find out that in
which circuit is earthed without isolating the breaker?

WHAT IS THE MEANING OF KEY SINGLE LINE DIAGRAM?

What is the meaning of rms value?

What is derating factor in Cable ? How we minimise this?

How we can calculate the transformer size?

How VFD(variable frequency) drive is used as a energy saver....?

What is effect of unbalanced load -- say R 15A, Y 25A, B ?

If i want to build 230kv substation what are the equipments to be installed?

How power saving takes place through VFD?

How to write program by ladder logic in case of PLC operation?

What is surge suppressor?

How to find transformer is in normal position? Whether its in charged


condition or not? Except humming sound?

How to find motor contactor rating and bimetalic relay rating? Of 30kw
motor which will operate on star-delta starter?

How to calculate the capacitor range for load for pf improvement? Example
for 65 hp load how to calculate capacitor range?

As all us know that the capacitor panel is connected to improve the power
factor when it is PF is low. Whether we can connect the capacitor panel on
D.G. side? If it is yes why?

Why voltage drop will occurs in 3 phase line?


How a generator is positioned in a hydroelectric power plant?

What is the generating voltage of a power station consided generally?

How to control the generator output voltage? What r the condition should
satisfy for synchronization?

What is inrush current in transformer?

Why making capacity is more than breaking capacity?

What is cathodic protection in Tank,and product pipelines?

Can you give main difference between ELCB And RCCB?

What is GD2(kg-m2) for Sq. Cage ind. Motor?

What is the difference between earthed and unearthed cable

What are the difference between C-Curve and D-Curve for MCB's.

How to select a CT

How to select a circuit breaker

What r the advantage of selecting micro controller type tripping of circuit


breaker than relay type tripping?

What is the meaning of BUS?

In step down transformer (415/200V),mistakenly secondary side is


connected to 415V for some hours, what would be result of this condition?

What is the difference between negative dc voltage and positive dc voltage


because some circuit uses -24,-5,-12,- 15,volt dc

If any lead acid battery is having low or high sp.gravity then what will be
effect of battery and why?

In Aeroplane what circuitry or method use for earthing?


What is the diff. Between two phase & three phase supply?

What is the reason for balance of voltage in magnetic balance test?

How can we measure and monitor critical performance parameters of Diesel


Generator Sets, both electrical and engine ?

How can you prove that in CE configuration a transistor has 180 degree
phase shifted output ?

What do you mean by 1 ton in AC`s?

Procedure for conducting vector group test on power transformers.why it is


conducted? How to increase the specific gravity of DG batteries?

What is mean CT Saturation? How to calculate?

There are 2 Flip_Flop with logic between them. Given Clock to Q delay,
logic prop. Delay, set up and hold times specify maximum clock frequency
of system. What happens if second output fed back to first input. Any
changes? What happens with timing if second output is fed back to logic
between the flops?

What is difference between start imitation and start interlock for 3 phase
motor protection ?

Why for transformer protection we protect transformer from 3rd harmonics


and 5th harmonics and what is the reason of generating these harmonics in
electrical system?

Whats the difference between Induction motor and servo motor

How to calculate the size of the conductor for particular load

Why heat produced at junction of two different conductor. What care should
be taken to minimize it

How much %age of corona losses increases if frequency is increased to


25%.
What happen when ac power transmitted in unity power factor

What is the difference between the electrical and electronics

What is the meaning of TRI Vector meter?

What is IGBT?Where it is used? What is the difference between IGBT and


Thyristor?

When a square wave is applied to primary of a transformer then what will be


output wave form of secondary

What is bandpass of a transformer?

Resistance of a conductor in a close electrical ckt is practically zero why?

Why C.T secondary are rated 5A generally

Draw waveform of capacitor or inductor in a d.c ckt(during transient) with


zero resistance with it(in series or parallel)also neglect resistance of wire

What is the significance of per unit impedance ?

What is the function of commutator in dc motor?

In case of delta/delta transformer if the one phase is blown out then what
will be secondary line voltage ?

What is linear motor?

What is the difference between ONLINE UPS and OFFLINE UPS?

Why electric shock due to dc is dangerous than that of ac?

Why the generating voltage in India is 11kv or why is it be transmitted as


multiples of 11?

How to calculate no. Of earthing pits and their diamensions? No. Of


lightning arrester rods which are required to protect a building of 35 mtr?
In India which type of PLCC is used?

Synchronous motor is three phase motor,but its not self starting .why?

Why the current leads voltage in the case of a capacitor?

What is cogging and crawling?

How to select earthing conductor size of amy motor/panel etc?

What is difference between AC VVVF drive & Dc VVVF drive explain their
working principle?

Capacitor is load free component but why ampere meter shows current when
capacitor bank breaker is closed?

When birds sit on transmission lines or current wires doesn't get shock?

What is the difference b/w winding insulation class and winding temperature
class?

Is it possible for a feedback surge to travel over a wireless connection?

What is a DLC? Explain the advantage of DLC over PLC?

What are the tests to be taken on a transformer and generator?

Do you know how to measure the earth resistance? If so explain it

What is the make of breakers, transformers, generators? What are their


capacities and ratings?

What are the starting currents of different motors and also what are the
running currents, and idle currents

Why a starter is used for a motor?

Do you know how to joint the H.T and L.T Cables?


How you take care of a motor from over loading and what are the different
overloading ratings of different motors?

Do you know the faults occurs generally in motors and how to rectify them

Do you know the overhauling of a motor?

Do you know the alignment of a motor?

What accessories required to give the motor with given circuits and do you
know the ratings of those accessories

Do you know how to connect a motor of different H.Ps?

Do you know how to maintain a generator, if so what are those


maintenances?

How do you maintain the batteries for generators, what is the daily
maintenance of a generator?

How do you maintain the earthing resistance?

What should be the earthing resistance of an industrial substation and also

What should be the house hold earthing resistance?

What is the rating of your substation and what are the different types of
substations

What are the different protection systems used to protect the transformer
internally and externally?

What are the different ratings of the fuse units for different distributions at
your organization?

What are the different protection systems takes place on control panel
board?

What is meant by H.R.C fuse?


Do you know how to measure the earth resistance? If so explain it

What are the different sizes of cables for H.T and L.T side of supply?

Is your generator is automated or manual if so do you know the circuits?

How do you connect the capacitors on polyphase circuits?

What is the power factor you maintain at ur organization?

What is the max demand on your transformer and your company

What is the rating of your capacitor bank at your company.

Das könnte Ihnen auch gefallen