Beruflich Dokumente
Kultur Dokumente
Spindles
www.pfisterer.co.za info@pfisterer.co.za
Silicone Post Insulators
Design
Rod
PFISTERER Post Insulators are manufactured with
Post Insulators electrical grade corrosion resistant epoxy rod. The
Pages 2-7 materials used are of the highest quality and are
routinely tested to ensure the maximum
performance characteristics.
End fittings
The fittings are machined from EN8 or cast from
malleable cast iron and hot dip galvanised in
accordance with ISO1461. A selection of base
diameters and conductor supports are available.
Sheds
Stand-off Insulators The sheds are manufactured using high-pressure
Pages 8-11 injection moulding techniques to create a smooth
surface reducing the amount of pollution trap. The
design of the Post Insulators are suitable for both
the side mount and vertical applications.
Standards
All Post insulators are manufactured in accordance
to IEC 61952. Quality processes are implemented
as per ISO 9001:2000. These are regularly audited
both internally and by our certification body DQS.
A variety of conductor
supports are available in
Steel or Aluminium
Silicone is
chemically
bonded to the
core rod during
moulding
Machined or
Cast galvanised
base fitting Pulltruded E-cr Epoxy
glass fibre rod
F-Neck C-Neck
F-Neck C-Neck
F-Neck C-Neck
F-Neck C-Neck
Maximum
Lightning 1 min
Minimum Specified Design
Impulse Power Arcing Approx
Base Creepage cantilever Cantilever
Part # Bushing Head Withstand frequency Distance Weight
(All Steel) Distance load load
voltage withstand (mm) (kg)
(mm) (SCL)(kN) (MDCL)(k
(kV) (wet) (kV)
N)
145 121-001 Aluminium F-Neck M20
145 121-002 Aluminium F-Neck M24
145 121-003 Steel F-Neck M20
145 121-004 Steel F-Neck M24
31mm/kV 255 114 350 1118 12.5 5 5
145 121-005 Aluminium C-Neck M20
145 121-006 Aluminium C-Neck M24
145 121-007 Steel C-Neck M20
145 121-008 Steel C-Neck M24
Galvanising in accordance to ISO 1461
For Spindles see page 12
7
HT Galvanised steel
bolt
Silicone rubber
sheds
Machined Hot Dip
Galvanised steel
base fitting
HT Galvanised
Steel Mounting
Bolt
Aluminium Alloy
Gain Base 12º offset
Shoe
F-Neck
C-Neck
Shoe
F-Neck
C-Neck
10
Shoe
F-Neck
C-Neck
11
12