Beruflich Dokumente
Kultur Dokumente
Verification Examples
For SAP2000® and CSiBridgeTM
The CSI Logo® and SAP2000® are registered trademarks of Computers and Structures, Inc.
CSiBridgeTM and Watch & LearnTM are trademarks of Computers and Structures, Inc. Windows is a
registered trademark of Microsoft Corporation. Adobe and Acrobat are registered trademarks of
Adobe Systems Incorporated.
The computer programs SAP2000® and CSiBridgeTM and all associated documentation are
proprietary and copyrighted products. Worldwide rights of ownership rest with Computers &
Structures, Inc. Unlicensed use of this program or reproduction of documentation in any
form, without prior written authorization from Computers & Structures, Inc., is explicitly
prohibited.
No part of this publication may be reproduced or distributed in any form or by any means, or
stored in a database or retrieval system, without the prior explicit written permission of the
publisher.
Further information and copies of this documentation may be obtained from:
Computers & Structures, Inc.
1995 University Avenue
Berkeley, California 94704 USA
CONSIDERABLE TIME, EFFORT AND EXPENSE HAVE GONE INTO THE DEVELOPMENT AND
TESTING OF THIS SOFTWARE. HOWEVER, THE USER ACCEPTS AND UNDERSTANDS THAT
NO WARRANTY IS EXPRESSED OR IMPLIED BY THE DEVELOPERS OR THE DISTRIBUTORS
ON THE ACCURACY OR THE RELIABILITY OF THIS PRODUCT.
CONTENTS
Introduction
Methodology
Acceptance Criteria
Summary of Examples
Examples
Frames
1-001 General Loading
1-002 Temperature Loading
1-003 Distributed and Concentrated Moments
1-004 Rotated Local Axes
1-005 Displacement Loading
1-006 Non-Prismatic Sections and Automatic Frame Subdivision
1-007 End Releases
1-008 Partial Fixity End Releases
1-009 Prestress Applied To Frame Objects
1-010 End Offsets
1-011 Insertion Point
1-012 No Tension and No Compression Frame Objects
1-013 Simply Supported Beam on Elastic Foundation
1-014 Eigenvalue Problem
1-015 Steady State Harmonic Loads
1-016 Tension Stiffening Using P-Delta Analysis
1-017 Vibration of a String Under Tension
1-018 Bending, Shear and Axial Deformations in a Rigid Frame
CONTENTS - 1
Software Verification
PROGRAM NAME: SAP2000
REVISION NO.: 10
Shells
2-001 Patch Test With Prescribed Displacements
2-002 Straight Beam with Static Loads
2-003 Curved Beam with Static Loads
2-004 Twisted Beam with Static Loads
2-005 Rectangular Plate with Static Loads
2-006 Scordelis-Lo Roof with Static Loads
2-007 Hemispherical Shell Structure with Static Loads
2-008 Cantilever Plate Eigenvalue Problem
2-009 Plate on Elastic Foundation
2-010 Cylinder with Internal Pressure
2-011 ASME Cooling Tower Problem with Static Wind Pressure
2-012 Plate Bending when Shear Deformations Are Significant
2-013 Temperature Load that Is Constant Through Shell Thickness
2-014 Temperature Gradient Through Shell Thickness
2-015 Orthotropic Plate
2-016 Out-of-Plane Buckling
2-017 In-Plane Buckling
2-018 Large Axial Displacements
2-019 Large Bending Displacements
2-020 Prestress Applied to Area Objects
CONTENTS - 2
Software Verification
PROGRAM NAME: SAP2000
REVISION NO.: 10
Planes
3-001 Patch Test With Prescribed Displacements
3-002 Straight Beam with Static Loads
3-003 Curved Beam with Static Loads
3-004 Thick-Walled Cylinder
3-005 Pore Pressure
Asolids
4-001 Soil Supporting Uniformly Loaded Circular Footing
4-002 Thick-Walled Cylinder
4-003 Rotating Annular Disk
4-004 Pore Pressure
Solids
5-001 Patch Test With Prescribed Displacements
5-002 Straight Beam with Static Loads
5-003 Curved Beam with Static Loads
5-004 Twisted Beam with Static Loads
5-005 Rectangular Plate with Static Loads
5-006 Scordelis-Lo Roof with Static Loads
5-007 Hemispherical Dome Structure with Static Loads
5-008 Thick-Walled Cylinder
5-009 Prestress Applied to Solid Objects
5-010 Buckling
5-011 Temperature Load
5-012 Plate on Elastic Foundation
5-013 Pore Pressure
CONTENTS - 3
Software Verification
PROGRAM NAME: SAP2000
REVISION NO.: 10
Links
6-001 Linear Link with Ramp Loading
6-002 Multi-Linear Elastic Link
6-003 Gap Element
6-004 Hook Element
6-005 Damper Element Under Harmonic Loading
6-006 SUNY Buffalo Damper with Linear Velocity Exponent
6-007 SUNY Buffalo Damper with Nonlinear Velocity Exponent
6-008 Plastic Wen Link
6-009 Plastic Kinematic Link
6-010 SUNY Buffalo Eight-Story Building with Rubber Isolators
6-011 SUNY Buffalo Seven-Story Building with Friction Pendulum Isolators
6-012 Frequency Dependent Links
Cables
7-001 Uniform and Temperature Loading
7-002 Uniform and Concentrated Loading
7-003 Prestressed Cable Net
Conclusions
Frames
Solids
Links
Cables
References
CONTENTS - 4