Beruflich Dokumente
Kultur Dokumente
Features
y Glass passivated die construction
y Integrally molded heatsink provides
Very low thermal resistance for
Maximum heat dissipation
y The plastic material used carries UL
flammability recognition 94V-0
y High surge current capability
Circuit y High temperature soldering guaranteed:
~ 260℃ /10 seconds, 0.375” (9.5mm) lead
-
length, 5lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic case
~ + Terminals: Plated leads solderable per
MIL-STD-750, Method 2026
Polarity: Marked on Body
Mounting Position: Any
Module Type
TYPE VRRM VRSM
GBPC3502W 200V 300V
GBPC3504W 400V 500V
GBPC3506W 600V 700V
GBPC3508W 800V 900V
GBPC3510W 1000V 1100V
Maximum Ratings and Thermal Characteristics (TA = 25℃ unless otherwise noted)
Symbol Conditions Values Units
IF(AV) Maximum average forward output rectified current Tc =55℃ 35 A
Peak forward surge current single half sine-wave superimposed
IFSM on rated load (JEDEC Method)
400 A
220x220x50 mm
AL plate heatsink
40
GBPC35W 10
30 GBPC15W, 25W
GBPC25W
1.0 GBPC35W
20
GBPC15W
0.1
10
Resistive or Tj=25ºC
Inductive load Pulse Width=300μs
0 0.01
0 50 100 150 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
TC, CASE TEMPERATURE (ºC) VF, INSTANTANEOU FORWARD VOLTAGE (V)
Fig.1 Forward Current Derating Curve Fig.2 Typical Forward Characteristics (per element)
500 1000
Single Half-Sine Wave
IFSM, PEAK FWD SURGE CURRENT (A)
(JEDEC Method)
400
Cj, CAPACITANCE (pF)
GBPC35W
300
100
200
GBPC15W, 25W
100
Tj=25ºC
Tj=150ºC f =1MHZ
0 10
1 10 100 0.1 1 10 100
NUMBER OF CYCLES AT 60Hz VR, REVERSE VOLTAGE (V)
Fig.3 Max Non-Repetitive Surge Current Fig.4 Typical Junction Capacitance (per element)
100
IR, INSTANTANEOUS REVERSE CURRENT (μA)
Tj=125ºC
10
1.0
0.1
Tj=25ºC
0.01
0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig.5 Typical Reverse Characteristics (per element)
-
~
1.135(28.8) 0.732(18.6)
1.115(28.3) 0.692(17.6)
0.24(6.0) ~
0.18(4.6)
+
0.470(11.9) 0.50(12.7)
0.430(10.9) 0.44(11.7)
0.042(1.07)
0.038(0.97)
DIA.
1.25
(31.8)
MIN.
0.310(7.87)
0.290(7.36)