Name : ___________________ Score : __________ / 15%
Matrix : ___________________ Date: ________________ Number IC/Passport : ___________________ Number
ANSWER THREE (3) QUESTIONS ONLY
Question 1
a. Define: i. Isolated system ii. Control mass system iii. Control volume system (3 marks)
b. State one example for each of the following system:
i. Open system ii. Closed system (2 marks)
Question 2
The resistance of the windings in a certain motor is found to be 80 ohms at room
temperature which is 25oC. When operating at full load under steady state conditions, the motor is switched off and the resistance of the windings immediately measured again and shows the reading of 93 ohms. The windings are made of copper whose resistance at temperature toC is given by Rt = Ro[1+0.00393t], where Ro is the resistance at 0oC. Find the temperature attained by the coil during full load in Kelvin. (5 marks)
Question 3
a. State FOUR (4) types of pdV-work or displacement work in quasi-static. (4 marks)
b. State ONE (1) example of moving boundary system (1 mark)
Question 4
a. What is the property introduced by the first law of thermodynamics? (1 mark)
b. In a cyclic process, heat transfers into a system are 14.7kJ and 31.5kJ, and heat transfers from the system are 25.2kJ and 3.56kJ. What is the net work for this cyclic process? (3 marks) c. What does it mean by “internal energy”? (1 mark)