Beruflich Dokumente
Kultur Dokumente
Programme BTEC level 3 Diploma in Engineering Learner name MOHAMED ZIHAAN SAEED
Assignment title ASSIGNMENT 1: ALGEBRAIC METHODS Assessor name MOHAMMAD RASHID TK
Targeted learning
Unit no. & title UNIT 4: Mathematics for Engineering Technicians aims/assessment Be able to use algebraic methods
criteria
First Submission
Deadline 24 March 2017 Date submitted 24 March 2017
Targeted Criteria
Assessment comments
criteria achieved
You have simplified three algebraic expressions using the laws of Indices and two using laws of logarithms
P1 Achieved
You have Solved a linear equation by plotting a straight-line graph using experimental data and deduced the gradient,
P2 Achieved intercept and equation of the line
You have factorised by extraction and grouping of a common factor from expressions with two, three and four terms
P3 Achieved respectively
General comments
Mohamed zihaan has achieved pass tasks (P1, P2 and P3) – He has manipulated and simplified algebraic expressions using the laws of Indices.
Plotted straight line graph using experimental data and deduced gradient, intercept and equation of the line
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
I certify that the evidence submitted for this assignment is my own. I have clearly referenced any sources used in the work.
Learner Declaration
I understand that false declaration is a form of malpractice.
I certify that the evidence submitted for this assignment is the learner’s own. The learner has clearly referenced any
Assessor declaration
sources used in the work. I understand that false declaration is a form of malpractice.
Date of feedback to
learner
Resubmission
authorisation Date
by Lead Internal Verifier*
* All resubmissions must be authorised by the Lead Internal Verifier. Only one resubmission is possible per assignment, providing:
● The learner has met initial deadlines set in the assignment, or has met an agreed deadline extension.
● The tutor considers that the learner will be able to provide improved evidence without further guidance.
● Evidence submitted for assessment has been authenticated and accompanied by a signed and dated declaration of authenticity by the learner.
**Any resubmission evidence must be submitted within 15 working days of receipt of results of assessment.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
ASSESSMENT RECORD SHEET
Programme BTEC level 3 Diploma in Engineering Learner name MOHAMED ZIHAAN SAEED
ASSIGNMENT 2: TRIGONOMETRIC METHODS AND
Assignment title Assessor name MOHAMMAD RASHID TK
STANDARD FORMULAE
Targeted learning Be able to use Trigonometric methods and
Unit no. & title UNIT 4: Mathematics for Engineering Technicians aims/assessment standard formulae to determine areas and
criteria volumes
First Submission
Deadline 01 May 2017 Date submitted 01 May 2017
Targeted Criteria
Assessment comments
criteria achieved
You have solved circular and triangular measurement problems involving the use of radian, sine, cosine and tangent
P4 Achieved
functions
P5 Achieved You have plot trigonometric functions sine, cosine and tangent over a complete cycle
P6 Achieved You have solved two practical engineering problems involving the sine and cosine rule
P7 Achieved Used standard formulae to find surface areas and volumes of regular solids for three different examples respectively
General comments
Mohamed Zihaan Saeed, You have achieved all the tasks (P4, P5, P6 and P7)
Solved problems inculding radian, sine, cosine and tangent functions
plotted three types trigonometric functions over a complete cycle.
Produced answers to two practical engineering problems involving sine and cosine rule.
He calculated the surface area and volumes for three different regular solids.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
I certify that the evidence submitted for this assignment is my own. I have clearly referenced any sources used in the work.
Learner Declaration
I understand that false declaration is a form of malpractice.
I certify that the evidence submitted for this assignment is the learner’s own. The learner has clearly referenced any
Assessor declaration
sources used in the work. I understand that false declaration is a form of malpractice.
Date of feedback to
learner
Resubmission
authorisation Date
by Lead Internal Verifier*
* All resubmissions must be authorised by the Lead Internal Verifier. Only one resubmission is possible per assignment, providing:
● The learner has met initial deadlines set in the assignment, or has met an agreed deadline extension.
● The tutor considers that the learner will be able to provide improved evidence without further guidance.
● Evidence submitted for assessment has been authenticated and accompanied by a signed and dated declaration of authenticity by the learner.
**Any resubmission evidence must be submitted within 15 working days of receipt of results of assessment.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
ASSESSMENT RECORD SHEET
Programme BTEC level 3 Diploma in Engineering Learner name MOHAMED ZIHAAN SAEED
Assignment title ASSIGNMENT 3: STATISTICAL METHODS Assessor name MOHAMMAD RASHID TK
Targeted learning
Be able to use Statistical methods to display
Unit no. & title UNIT 4: Mathematics for Engineering Technicians aims/assessment
criteria
data
First Submission
Deadline 21 May 2017 Date submitted 21 May 2017
Targeted Criteria
Assessment comments
criteria achieved
P8 Achieved You have Collected data and produced statistical diagrams, histograms and frequency curves
P9 Achieved You have calculated the mean, median and mode for two statistical problems
General comments
I certify that the evidence submitted for this assignment is my own. I have clearly referenced any sources used in the work.
Learner Declaration
I understand that false declaration is a form of malpractice.
I certify that the evidence submitted for this assignment is the learner’s own. The learner has clearly referenced any
Assessor declaration
sources used in the work. I understand that false declaration is a form of malpractice.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
Assessor signature Date
Date of feedback to
learner
Resubmission
authorisation Date
by Lead Internal Verifier*
* All resubmissions must be authorised by the Lead Internal Verifier. Only one resubmission is possible per assignment, providing:
● The learner has met initial deadlines set in the assignment, or has met an agreed deadline extension.
● The tutor considers that the learner will be able to provide improved evidence without further guidance.
● Evidence submitted for assessment has been authenticated and accompanied by a signed and dated declaration of authenticity by the learner.
**Any resubmission evidence must be submitted within 15 working days of receipt of results of assessment.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
ASSESSMENT RECORD SHEET
Programme BTEC level 3 Diploma in Engineering Learner name MOHAMED ZIHAAN SAEED
Assignment title ASSIGNMENT 4: Calculus Techniques Assessor name MOHAMMAD RASHID TK
Targeted learning
Unit no. & title UNIT 4: Mathematics for Engineering Technicians aims/assessment Be able to use Calculus Techniques
criteria
First Submission
Deadline 02 June 2017 Date submitted 02 June 2017
Targeted Criteria
Assessment comments
criteria achieved
You have applied the basic rules of calculus arithmetic to solve three different types of function by differentiation and two
P10 Achieved
different types of function by integration
D1 N/A Not Achieved
D2 N/A Not Achieved
General comments
I certify that the evidence submitted for this assignment is my own. I have clearly referenced any sources used in the work.
Learner Declaration
I understand that false declaration is a form of malpractice.
I certify that the evidence submitted for this assignment is the learner’s own. The learner has clearly referenced any
Assessor declaration
sources used in the work. I understand that false declaration is a form of malpractice.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.
Assessor signature Date
Date of feedback to
learner
Resubmission
authorisation Date
by Lead Internal Verifier*
* All resubmissions must be authorised by the Lead Internal Verifier. Only one resubmission is possible per assignment, providing:
● The learner has met initial deadlines set in the assignment, or has met an agreed deadline extension.
● The tutor considers that the learner will be able to provide improved evidence without further guidance.
● Evidence submitted for assessment has been authenticated and accompanied by a signed and dated declaration of authenticity by the learner.
**Any resubmission evidence must be submitted within 15 working days of receipt of results of assessment.
PLEASE NOTE: When submitting evidence for assessment, each learner must sign a declaration confirming that the work is their own. You may use this form, or incorporate a learner
declaration into an Assignment Brief front sheet.